| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at
compile time. UML supports these via its UML_IOMEM_EMULATION so let that
select HAS_IOPORT and also reflect this in NO_IOPORT_MAP.
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
|
|
Remove the pcap driver in UML. It is obsolete. It does not build on
recent systems due to changes in libpcap and its dependencies.
The vector driver's raw transport in UML provides identical
functionality.
Signed-off-by: Anton Ivanov <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
|
|
When in time-travel mode (infinite-cpu or external) time should not pass
for writing to the console. As such, it makes sense to put the FD for
the output side into blocking mode and simply let any write to it hang.
If we did not do this, then time could pass waiting for the console to
become writable again. This is not desirable as it has random effects on
the clock between runs.
Implement this by duplicating the FD if output is active in a relevant
mode and setting the duplicate to be blocking. This avoids changing the
input channel to be blocking should it exists. After this, use the
blocking FD for all write operations and do not allocate an IRQ it is
set.
Without time-travel mode fd_out will always match fd_in and IRQs are
registered.
Signed-off-by: Benjamin Berg <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
|
|
In the next commit, we are going to set the output FD to be blocking.
Once that is done, the write() may be short if an interrupt happens
while it is writing out data. As such, to properly catch an EINTR error,
we need to retry the write.
Signed-off-by: Benjamin Berg <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
|
|
If the read/write function returns an error then we expect to see an
event/IRQ later on. However, this will only happen after an EAGAIN as we
are using edge based event triggering.
As such, EINTR needs to be caught should it happen.
Signed-off-by: Benjamin Berg <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
|
|
When in time-travel mode, the eventfd events are read even when signals
are blocked as SIGIO still needs to be processed. In this case, the
event is cleared on the eventfd but the IRQ still needs to be fired
later.
We did already ensure that the SIGIO handler is run again. However, the
FDs are configured to be level triggered, so that eventfd will not
notify again. As such, add some logic to mark the IRQ as pending and
process it at the next opportunity.
To avoid duplication, reuse the logic used for the suspend/resume case.
This does not really change anything except for delaying running the
IRQs with timetravel_handler at a slightly later point in time (and
possibly running non-timetravel IRQs that shouldn't happen earlier).
While at it, move marking as pending into irq_event_handler as that is
the more logical place for it to happen.
Signed-off-by: Benjamin Berg <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
|
|
The processing of a Transfer-In-Channel (TIC) CCW requires locating
the target of the CCW in the channel program, and updating the
address to reflect what will actually be sent to hardware.
An error exists where the 64-bit virtual address is truncated to
32-bits (variable "cda") when performing this math. Since s390
addresses of that size are 31-bits, this leaves that additional
bit enabled such that the resulting I/O triggers a channel
program check. This shows up occasionally when booting a KVM
guest from a passthrough DASD device:
..snip...
Interrupt Response Block Data:
: 0x0000000000003990
Function Ctrl : [Start]
Activity Ctrl :
Status Ctrl : [Alert] [Primary] [Secondary] [Status-Pending]
Device Status :
Channel Status : [Program-Check]
cpa=: 0x00000000008d0018
prev_ccw=: 0x0000000000000000
this_ccw=: 0x0000000000000000
...snip...
dasd-ipl: Failed to run IPL1 channel program
The channel program address of "0x008d0018" in the IRB doesn't
look wrong, but tracing the CCWs shows the offending bit enabled:
ccw=0x0000012e808d0000 cda=00a0b030
ccw=0x0000012e808d0008 cda=00a0b038
ccw=0x0000012e808d0010 cda=808d0008
ccw=0x0000012e808d0018 cda=00a0b040
Fix the calculation of the TIC CCW's data address such that it points
to a valid 31-bit address regardless of the input address.
Fixes: bd36cfbbb9e1 ("s390/vfio_ccw_cp: use new address translation helpers")
Signed-off-by: Eric Farman <[email protected]>
Reviewed-by: Heiko Carstens <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexander Gordeev <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
|
|
Add compatible string for chip ls1046 to fix below warning.
arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dtb: /soc/gpio@2300000: failed to match any schema with compatible: ['fsl,ls1046a-gpio', 'fsl,qoriq-gpio']
Signed-off-by: Frank Li <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
The ONSemi N24S64B is a 64 KBit serial EEPROM that is compatible
with atmel,24c64.
Signed-off-by: Frieder Schrempf <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
Merge the compatibles for the 24c16 types into a single list.
Signed-off-by: Frieder Schrempf <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
Add support for compatible Microchip 24AA025E48/24AA025E64 EEPROMs.
Reviewed-by: Conor Dooley <[email protected]>
Signed-off-by: Andrei Simion <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
Add "microchip,24aa025e48", "microchip,24aa025e64" compatible for the
usage w/ 24AA025E{48, 64} type of EEPROMs where "24aa025e48" stands
for EUI-48 address and "24aa025e64" stands for EUI-64 address.
[[email protected]: Use AT24_DATA_CHIP with AT24_FLAG_READONLY for
24AA025E{48, 64} type of EEPROMs. Reword commit message.]
Signed-off-by: Claudiu Beznea <[email protected]>
Signed-off-by: Andrei Simion <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
Use 'return_ptr' helper for returning a pointer without cleanup for
shorter code.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
Replace the fixed regulator for USB VBUS and use the proper one that
controls regulator based on VBUS detection.
Signed-off-by: Biju Das <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Philipp Zabel <[email protected]>
|
|
Use regulator_hardware_enable() for controlling VBUS enable for
RZ/G2L alike SoCs in interrupt context.
Signed-off-by: Biju Das <[email protected]>
Acked-by: Vinod Koul <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Philipp Zabel <[email protected]>
|
|
As per RZ/G2L HW manual, VBUS enable can be controlled by the VBOUT bit
of the VBUS Control Register(VBENCTL) register in the USBPHY Control.
Expose this register as regmap and instantiate the USB VBUS regulator
device, so that consumer can control the vbus using regulator API's
Signed-off-by: Biju Das <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Philipp Zabel <[email protected]>
|
|
The VBUS enable can be controlled by the VBOUT bit of the VBUS control
register. This register is part of usbphy-ctrl IP.
Document the USB VBUS regulator object.
Signed-off-by: Biju Das <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Philipp Zabel <[email protected]>
|
|
qc->result_tf contents are only valid when the ATA_QCFLAG_RTF_FILLED flag
is set. The ATA_QCFLAG_RTF_FILLED flag should be always set for commands
that failed or for commands that have the ATA_QCFLAG_RESULT_TF flag set.
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Reviewed-by: Niklas Cassel <[email protected]>
Signed-off-by: Igor Pylypiv <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Niklas Cassel <[email protected]>
|
|
ATA_QCFLAG_RTF_FILLED is not specific to ahci and can be used generally
to check if qc->result_tf contains valid data.
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Reviewed-by: Niklas Cassel <[email protected]>
Signed-off-by: Igor Pylypiv <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Niklas Cassel <[email protected]>
|
|
ATA device id is not used in ata_to_sense_error().
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Reviewed-by: Niklas Cassel <[email protected]>
Signed-off-by: Igor Pylypiv <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Niklas Cassel <[email protected]>
|
|
SCSI layer clears sense_buffer in scsi_queue_rq() so there is no need for
libata to clear it again.
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Reviewed-by: Niklas Cassel <[email protected]>
Signed-off-by: Igor Pylypiv <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Niklas Cassel <[email protected]>
|
|
SAT-5 revision 8 specification removed the text about the ANSI INCITS
431-2007 compliance which was requiring SCSI/ATA Translation (SAT) to
return descriptor format sense data for the ATA PASS-THROUGH commands
regardless of the setting of the D_SENSE bit.
Let's honor the D_SENSE bit for ATA PASS-THROUGH commands while
generating the "ATA PASS-THROUGH INFORMATION AVAILABLE" sense data.
SAT-5 revision 7
================
12.2.2.8 Fixed format sense data
Table 212 shows the fields returned in the fixed format sense data
(see SPC-5) for ATA PASS-THROUGH commands. SATLs compliant with ANSI
INCITS 431-2007, SCSI/ATA Translation (SAT) return descriptor format
sense data for the ATA PASS-THROUGH commands regardless of the setting
of the D_SENSE bit.
SAT-5 revision 8
================
12.2.2.8 Fixed format sense data
Table 211 shows the fields returned in the fixed format sense data
(see SPC-5) for ATA PASS-THROUGH commands.
Cc: [email protected] # 4.19+
Reported-by: Niklas Cassel <[email protected]>
Closes: https://lore.kernel.org/linux-ide/[email protected]
Reviewed-by: Niklas Cassel <[email protected]>
Signed-off-by: Igor Pylypiv <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Niklas Cassel <[email protected]>
|
|
Current ata_gen_passthru_sense() code performs two actions:
1. Generates sense data based on the ATA 'status' and ATA 'error' fields.
2. Populates "ATA Status Return sense data descriptor" / "Fixed format
sense data" with ATA taskfile fields.
The problem is that #1 generates sense data even when a valid sense data
is already present (ATA_QCFLAG_SENSE_VALID is set). Factoring out #2 into
a separate function allows us to generate sense data only when there is
no valid sense data (ATA_QCFLAG_SENSE_VALID is not set).
As a bonus, we can now delete a FIXME comment in atapi_qc_complete()
which states that we don't want to translate taskfile registers into
sense descriptors for ATAPI.
Additionally, always set SAM_STAT_CHECK_CONDITION when CK_COND=1 because
SAT specification mandates that SATL shall return CHECK CONDITION if
the CK_COND bit is set.
The ATA PASS-THROUGH handling logic in ata_scsi_qc_complete() is hard
to read/understand. Improve the readability of the code by moving checks
into self-explanatory boolean variables.
Cc: [email protected] # 4.19+
Co-developed-by: Niklas Cassel <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Reviewed-by: Niklas Cassel <[email protected]>
Signed-off-by: Igor Pylypiv <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Niklas Cassel <[email protected]>
|
|
Correct the ATA PASS-THROUGH fixed format sense data offsets to conform
to SPC-6 and SAT-5 specifications. Additionally, set the VALID bit to
indicate that the INFORMATION field contains valid information.
INFORMATION
===========
SAT-5 Table 212 — "Fixed format sense data INFORMATION field for the ATA
PASS-THROUGH commands" defines the following format:
+------+------------+
| Byte | Field |
+------+------------+
| 0 | ERROR |
| 1 | STATUS |
| 2 | DEVICE |
| 3 | COUNT(7:0) |
+------+------------+
SPC-6 Table 48 - "Fixed format sense data" specifies that the INFORMATION
field starts at byte 3 in sense buffer resulting in the following offsets
for the ATA PASS-THROUGH commands:
+------------+-------------------------+
| Field | Offset in sense buffer |
+------------+-------------------------+
| ERROR | 3 |
| STATUS | 4 |
| DEVICE | 5 |
| COUNT(7:0) | 6 |
+------------+-------------------------+
COMMAND-SPECIFIC INFORMATION
============================
SAT-5 Table 213 - "Fixed format sense data COMMAND-SPECIFIC INFORMATION
field for ATA PASS-THROUGH" defines the following format:
+------+-------------------+
| Byte | Field |
+------+-------------------+
| 0 | FLAGS | LOG INDEX |
| 1 | LBA (7:0) |
| 2 | LBA (15:8) |
| 3 | LBA (23:16) |
+------+-------------------+
SPC-6 Table 48 - "Fixed format sense data" specifies that
the COMMAND-SPECIFIC-INFORMATION field starts at byte 8
in sense buffer resulting in the following offsets for
the ATA PASS-THROUGH commands:
Offsets of these fields in the fixed sense format are as follows:
+-------------------+-------------------------+
| Field | Offset in sense buffer |
+-------------------+-------------------------+
| FLAGS | LOG INDEX | 8 |
| LBA (7:0) | 9 |
| LBA (15:8) | 10 |
| LBA (23:16) | 11 |
+-------------------+-------------------------+
Reported-by: Akshat Jain <[email protected]>
Fixes: 11093cb1ef56 ("libata-scsi: generate correct ATA pass-through sense")
Cc: [email protected]
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Niklas Cassel <[email protected]>
Signed-off-by: Igor Pylypiv <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Niklas Cassel <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into reset/next
regulator: Add helper to allow enable/disable in interrupt context
Add a helper function that enables exclusive consumers to bypass locking
and do an enable/disable from within interrupt context.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Philipp Zabel <[email protected]>
|
|
Convert to new uid/gid option parsing helpers
Signed-off-by: Eric Sandeen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: OGAWA Hirofumi <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
vfat and msdos share a common set of options, with additional, unique
options for each filesystem.
Each filesystem calls common fc initialization and parsing routines,
with an "is_vfat" parameter. For parsing, if the option is not found
in the common parameter_spec, parsing is retried with the fs-specific
parameter_spec.
This patch leaves nls loading to fill_super, so the codepage and charset
options are not validated as they are requested. This matches current
behavior. It would be possible to test-load as each option is parsed,
but that would make i.e.
mount -o "iocharset=nope,iocharset=iso8859-1"
fail, where it does not fail today because only the last iocharset
option is considered.
The obsolete "conv=" option is set up with an enum of acceptable values;
currently invalid "conv=" options are rejected as such, even though the
option is obsolete, so this patch preserves that behavior.
Signed-off-by: Eric Sandeen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: OGAWA Hirofumi <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
Move the debug variable into fat_mount_options for consistency and
to facilitate conversion to new mount API.
Signed-off-by: Eric Sandeen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: OGAWA Hirofumi <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
As David Laight noticed,
"In a multithreaded program it is reasonable to have a thread blocked in
accept(). With TCP a subsequent shutdown(listen_fd, SHUT_RDWR) causes
the accept to fail. But nothing happens for SCTP."
sctp_disconnect() is eventually called when shutdown a listen socket,
but nothing is done in this function. This patch sets RCV_SHUTDOWN
flag in sk->sk_shutdown there, and adds the check (sk->sk_shutdown &
RCV_SHUTDOWN) to break and return in sctp_accept().
Note that shutdown() is only supported on TCP-style SCTP socket.
Reported-by: David Laight <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add missing lock protection in poll routine when iterating xarray,
otherwise:
Even with RCU read lock held, only the slot of the radix tree is
ensured to be pinned there, while the data structure (e.g. struct
cachefiles_req) stored in the slot has no such guarantee. The poll
routine will iterate the radix tree and dereference cachefiles_req
accordingly. Thus RCU read lock is not adequate in this case and
spinlock is needed here.
Fixes: b817e22b2e91 ("cachefiles: narrow the scope of triggering EPOLLIN events in ondemand mode")
Signed-off-by: Jingbo Xu <[email protected]>
Signed-off-by: Baokun Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Jeff Layton <[email protected]>
Reviewed-by: Jia Zhu <[email protected]>
Reviewed-by: Gao Xiang <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
Reusing the msg_id after a maliciously completed reopen request may cause
a read request to remain unprocessed and result in a hung, as shown below:
t1 | t2 | t3
-------------------------------------------------
cachefiles_ondemand_select_req
cachefiles_ondemand_object_is_close(A)
cachefiles_ondemand_set_object_reopening(A)
queue_work(fscache_object_wq, &info->work)
ondemand_object_worker
cachefiles_ondemand_init_object(A)
cachefiles_ondemand_send_req(OPEN)
// get msg_id 6
wait_for_completion(&req_A->done)
cachefiles_ondemand_daemon_read
// read msg_id 6 req_A
cachefiles_ondemand_get_fd
copy_to_user
// Malicious completion msg_id 6
copen 6,-1
cachefiles_ondemand_copen
complete(&req_A->done)
// will not set the object to close
// because ondemand_id && fd is valid.
// ondemand_object_worker() is done
// but the object is still reopening.
// new open req_B
cachefiles_ondemand_init_object(B)
cachefiles_ondemand_send_req(OPEN)
// reuse msg_id 6
process_open_req
copen 6,A.size
// The expected failed copen was executed successfully
Expect copen to fail, and when it does, it closes fd, which sets the
object to close, and then close triggers reopen again. However, due to
msg_id reuse resulting in a successful copen, the anonymous fd is not
closed until the daemon exits. Therefore read requests waiting for reopen
to complete may trigger hung task.
To avoid this issue, allocate the msg_id cyclically to avoid reusing the
msg_id for a very short duration of time.
Fixes: c8383054506c ("cachefiles: notify the user daemon when looking up cookie")
Signed-off-by: Baokun Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Jeff Layton <[email protected]>
Reviewed-by: Gao Xiang <[email protected]>
Reviewed-by: Jia Zhu <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
When queuing ondemand_object_worker() to re-open the object,
cachefiles_object is not pinned. The cachefiles_object may be freed when
the pending read request is completed intentionally and the related
erofs is umounted. If ondemand_object_worker() runs after the object is
freed, it will incur use-after-free problem as shown below.
process A processs B process C process D
cachefiles_ondemand_send_req()
// send a read req X
// wait for its completion
// close ondemand fd
cachefiles_ondemand_fd_release()
// set object as CLOSE
cachefiles_ondemand_daemon_read()
// set object as REOPENING
queue_work(fscache_wq, &info->ondemand_work)
// close /dev/cachefiles
cachefiles_daemon_release
cachefiles_flush_reqs
complete(&req->done)
// read req X is completed
// umount the erofs fs
cachefiles_put_object()
// object will be freed
cachefiles_ondemand_deinit_obj_info()
kmem_cache_free(object)
// both info and object are freed
ondemand_object_worker()
When dropping an object, it is no longer necessary to reopen the object,
so use cancel_work_sync() to cancel or wait for ondemand_object_worker()
to finish.
Fixes: 0a7e54c1959c ("cachefiles: resend an open request if the read request's object is closed")
Signed-off-by: Hou Tao <[email protected]>
Signed-off-by: Baokun Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Jeff Layton <[email protected]>
Reviewed-by: Jia Zhu <[email protected]>
Reviewed-by: Gao Xiang <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
Because after an object is dropped, requests for that object are useless,
cancel them to avoid causing other problems.
This prepares for the later addition of cancel_work_sync(). After the
reopen requests is generated, cancel it to avoid cancel_work_sync()
blocking by waiting for daemon to complete the reopen requests.
Signed-off-by: Baokun Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Jeff Layton <[email protected]>
Reviewed-by: Gao Xiang <[email protected]>
Reviewed-by: Jia Zhu <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
Added CACHEFILES_ONDEMAND_OBJSTATE_DROPPING indicates that the cachefiles
object is being dropped, and is set after the close request for the dropped
object completes, and no new requests are allowed to be sent after this
state.
This prepares for the later addition of cancel_work_sync(). It prevents
leftover reopen requests from being sent, to avoid processing unnecessary
requests and to avoid cancel_work_sync() blocking by waiting for daemon to
complete the reopen requests.
Signed-off-by: Baokun Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Jeff Layton <[email protected]>
Reviewed-by: Gao Xiang <[email protected]>
Reviewed-by: Jia Zhu <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
In cachefiles_check_volume_xattr(), the error returned by vfs_getxattr()
is not passed to ret, so it ends up returning -ESTALE, which leads to an
endless loop as follows:
cachefiles_acquire_volume
retry:
ret = cachefiles_check_volume_xattr
ret = -ESTALE
xlen = vfs_getxattr // return -EIO
// The ret is not updated when xlen < 0, so -ESTALE is returned.
return ret
// Supposed to jump out of the loop at this judgement.
if (ret != -ESTALE)
goto error_dir;
cachefiles_bury_object
// EIO causes rename failure
goto retry;
Hence propagate the error returned by vfs_getxattr() to avoid the above
issue. Do the same in cachefiles_check_auxdata().
Fixes: 32e150037dce ("fscache, cachefiles: Store the volume coherency data")
Fixes: 72b957856b0c ("cachefiles: Implement metadata/coherency data storage in xattrs")
Signed-off-by: Baokun Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Gao Xiang <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
We got the following issue in our fault injection stress test:
==================================================================
BUG: KASAN: slab-use-after-free in cachefiles_withdraw_cookie+0x4d9/0x600
Read of size 8 at addr ffff888118efc000 by task kworker/u78:0/109
CPU: 13 PID: 109 Comm: kworker/u78:0 Not tainted 6.8.0-dirty #566
Call Trace:
<TASK>
kasan_report+0x93/0xc0
cachefiles_withdraw_cookie+0x4d9/0x600
fscache_cookie_state_machine+0x5c8/0x1230
fscache_cookie_worker+0x91/0x1c0
process_one_work+0x7fa/0x1800
[...]
Allocated by task 117:
kmalloc_trace+0x1b3/0x3c0
cachefiles_acquire_volume+0xf3/0x9c0
fscache_create_volume_work+0x97/0x150
process_one_work+0x7fa/0x1800
[...]
Freed by task 120301:
kfree+0xf1/0x2c0
cachefiles_withdraw_cache+0x3fa/0x920
cachefiles_put_unbind_pincount+0x1f6/0x250
cachefiles_daemon_release+0x13b/0x290
__fput+0x204/0xa00
task_work_run+0x139/0x230
do_exit+0x87a/0x29b0
[...]
==================================================================
Following is the process that triggers the issue:
p1 | p2
------------------------------------------------------------
fscache_begin_lookup
fscache_begin_volume_access
fscache_cache_is_live(fscache_cache)
cachefiles_daemon_release
cachefiles_put_unbind_pincount
cachefiles_daemon_unbind
cachefiles_withdraw_cache
fscache_withdraw_cache
fscache_set_cache_state(cache, FSCACHE_CACHE_IS_WITHDRAWN);
cachefiles_withdraw_objects(cache)
fscache_wait_for_objects(fscache)
atomic_read(&fscache_cache->object_count) == 0
fscache_perform_lookup
cachefiles_lookup_cookie
cachefiles_alloc_object
refcount_set(&object->ref, 1);
object->volume = volume
fscache_count_object(vcookie->cache);
atomic_inc(&fscache_cache->object_count)
cachefiles_withdraw_volumes
cachefiles_withdraw_volume
fscache_withdraw_volume
__cachefiles_free_volume
kfree(cachefiles_volume)
fscache_cookie_state_machine
cachefiles_withdraw_cookie
cache = object->volume->cache;
// cachefiles_volume UAF !!!
After setting FSCACHE_CACHE_IS_WITHDRAWN, wait for all the cookie lookups
to complete first, and then wait for fscache_cache->object_count == 0 to
avoid the cookie exiting after the volume has been freed and triggering
the above issue. Therefore call fscache_withdraw_volume() before calling
cachefiles_withdraw_objects().
This way, after setting FSCACHE_CACHE_IS_WITHDRAWN, only the following two
cases will occur:
1) fscache_begin_lookup fails in fscache_begin_volume_access().
2) fscache_withdraw_volume() will ensure that fscache_count_object() has
been executed before calling fscache_wait_for_objects().
Fixes: fe2140e2f57f ("cachefiles: Implement volume support")
Suggested-by: Hou Tao <[email protected]>
Signed-off-by: Baokun Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christian Brauner <[email protected]>
|
|
We got the following issue in our fault injection stress test:
==================================================================
BUG: KASAN: slab-use-after-free in fscache_withdraw_volume+0x2e1/0x370
Read of size 4 at addr ffff88810680be08 by task ondemand-04-dae/5798
CPU: 0 PID: 5798 Comm: ondemand-04-dae Not tainted 6.8.0-dirty #565
Call Trace:
kasan_check_range+0xf6/0x1b0
fscache_withdraw_volume+0x2e1/0x370
cachefiles_withdraw_volume+0x31/0x50
cachefiles_withdraw_cache+0x3ad/0x900
cachefiles_put_unbind_pincount+0x1f6/0x250
cachefiles_daemon_release+0x13b/0x290
__fput+0x204/0xa00
task_work_run+0x139/0x230
Allocated by task 5820:
__kmalloc+0x1df/0x4b0
fscache_alloc_volume+0x70/0x600
__fscache_acquire_volume+0x1c/0x610
erofs_fscache_register_volume+0x96/0x1a0
erofs_fscache_register_fs+0x49a/0x690
erofs_fc_fill_super+0x6c0/0xcc0
vfs_get_super+0xa9/0x140
vfs_get_tree+0x8e/0x300
do_new_mount+0x28c/0x580
[...]
Freed by task 5820:
kfree+0xf1/0x2c0
fscache_put_volume.part.0+0x5cb/0x9e0
erofs_fscache_unregister_fs+0x157/0x1b0
erofs_kill_sb+0xd9/0x1c0
deactivate_locked_super+0xa3/0x100
vfs_get_super+0x105/0x140
vfs_get_tree+0x8e/0x300
do_new_mount+0x28c/0x580
[...]
==================================================================
Following is the process that triggers the issue:
mount failed | daemon exit
------------------------------------------------------------
deactivate_locked_super cachefiles_daemon_release
erofs_kill_sb
erofs_fscache_unregister_fs
fscache_relinquish_volume
__fscache_relinquish_volume
fscache_put_volume(fscache_volume, fscache_volume_put_relinquish)
zero = __refcount_dec_and_test(&fscache_volume->ref, &ref);
cachefiles_put_unbind_pincount
cachefiles_daemon_unbind
cachefiles_withdraw_cache
cachefiles_withdraw_volumes
list_del_init(&volume->cache_link)
fscache_free_volume(fscache_volume)
cache->ops->free_volume
cachefiles_free_volume
list_del_init(&cachefiles_volume->cache_link);
kfree(fscache_volume)
cachefiles_withdraw_volume
fscache_withdraw_volume
fscache_volume->n_accesses
// fscache_volume UAF !!!
The fscache_volume in cache->volumes must not have been freed yet, but its
reference count may be 0. So use the new fscache_try_get_volume() helper
function try to get its reference count.
If the reference count of fscache_volume is 0, fscache_put_volume() is
freeing it, so wait for it to be removed from cache->volumes.
If its reference count is not 0, call cachefiles_withdraw_volume() with
reference count protection to avoid the above issue.
Fixes: fe2140e2f57f ("cachefiles: Implement volume support")
Signed-off-by: Baokun Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christian Brauner <[email protected]>
|
|
Export fscache_put_volume() and add fscache_try_get_volume()
helper function to allow cachefiles to get/put fscache_volume
via linux/fscache-cache.h.
Signed-off-by: Baokun Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christian Brauner <[email protected]>
|
|
On CONFIG_SMP=y and on 32bit we need to decrease DNAME_INLINE_LEN to 36
btyes to end up with 128 bytes in total.
Reported-by: Linus Torvalds <[email protected]>
Links: https://lore.kernel.org/r/CAHk-=whtoqTSCcAvV-X-KPqoDWxS4vxmWpuKLB+Vv8=FtUd5vA@mail.gmail.com
Signed-off-by: Christian Brauner <[email protected]>
|
|
Stock kernel scales worse than FreeBSD when doing a 20-way stat(2) on
the same tmpfs-backed file.
According to perf top:
38.09% lockref_put_return
26.08% lockref_get_not_dead
25.60% __d_lookup_rcu
0.89% clear_bhb_loop
__d_lookup_rcu is participating in cacheline ping pong due to the
embedded name sharing a cacheline with lockref.
Moving it out resolves the problem:
41.50% lockref_put_return
41.03% lockref_get_not_dead
1.54% clear_bhb_loop
benchmark (will-it-scale, Sapphire Rapids, tmpfs, ops/s):
FreeBSD:7219334
before: 5038006
after: 7842883 (+55%)
One minor remark: the 'after' result is unstable, fluctuating in the
range ~7.8 mln to ~9 mln during different runs.
Signed-off-by: Mateusz Guzik <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christian Brauner <[email protected]>
|
|
As described by the microchip article "LAN937X - The required
configuration for the external MAC port to operate at RGMII-to-RGMII
1Gbps link speed." [1]:
"When VPHY is enabled, the auto-negotiation process following IEEE 802.3
standard will be triggered and will result in RGMII-to-RGMII signal
failure on the interface because VPHY will try to poll the PHY status
that is not available in the scenario of RGMII-to-RGMII connection
(normally the link partner is usually an external processor).
Note that when VPHY fails on accessing PHY registers, it will fall back
to 100Mbps speed, it indicates disabling VPHY is optional if you only
need the port to link at 100Mbps speed.
Again, VPHY must and can only be disabled by writing VPHY_DISABLE bit in
the register below as there is no strapping pin for the control."
This patch was tested on LAN9372, so far it seems to not to affect VPHY
based clock crossing optimization for the ports with integrated PHYs.
[1]: https://microchip.my.site.com/s/article/LAN937X-The-required-configuration-for-the-external-MAC-port-to-operate-at-RGMII-to-RGMII-1Gbps-link-speed
Signed-off-by: Lucas Stach <[email protected]>
Signed-off-by: Oleksij Rempel <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
interfaces
This driver do not support in-band mode and in case of CPU<->Switch
link, this mode is not working any way. So, disable it otherwise ingress
path of the switch MAC will stay disabled.
Note: lan9372 manual do not document 0xN301 BIT(2) for the RGMII mode
and recommend[1] to disable in-band link status update for the RGMII RX
path by clearing 0xN302 BIT(0). But, 0xN301 BIT(2) seems to work too, so
keep it unified with other KSZ switches.
[1] https://microchip.my.site.com/s/article/LAN937X-The-required-configuration-for-the-external-MAC-port-to-operate-at-RGMII-to-RGMII-1Gbps-link-speed
Signed-off-by: Lucas Stach <[email protected]>
Signed-off-by: Oleksij Rempel <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Acked-by: Arun Ramadoss <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
On the LAN9371 and LAN9372, the 4th internal PHY is a 100BaseTX PHY
instead of a 100BaseT1 PHY. The 100BaseTX PHYs have a different base
register offset.
Signed-off-by: Lucas Stach <[email protected]>
Signed-off-by: Oleksij Rempel <[email protected]>
Acked-by: Arun Ramadoss <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Commit 750011e239a5 ("net: stmmac: Add support for HW-accelerated VLAN
stripping") enables MAC level VLAN tag stripping for all MAC cores, but
leaves set_hw_vlan_mode() and rx_hw_vlan() un-implemented for both gmac
and xgmac.
On gmac and xgmac, ethtool reports rx-vlan-offload is on, both MAC and
driver do nothing about VLAN packets actually, although VLAN works well.
Driver level stripping should be used on gmac and xgmac for now.
Fixes: 750011e239a5 ("net: stmmac: Add support for HW-accelerated VLAN stripping")
Signed-off-by: Furong Xu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The if condition !A || A && B can be simplified to !A || B.
Fixes the following Coccinelle/coccicheck warning reported by
excluded_middle.cocci:
WARNING !A || A && B is equivalent to !A || B
Compile-tested only.
Acked-by: Thomas Zimmermann <[email protected]>
Signed-off-by: Thorsten Blum <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Starting with kernel 6.7, the framebuffer text console is not working
anymore with the virtio-gpu device on s390x hosts. Such big endian fb
devices are usinga different pixel ordering than little endian devices,
e.g. DRM_FORMAT_BGRX8888 instead of DRM_FORMAT_XRGB8888.
This used to work fine as long as drm_client_buffer_addfb() was still
calling drm_mode_addfb() which called drm_driver_legacy_fb_format()
internally to get the right format. But drm_client_buffer_addfb() has
recently been reworked to call drm_mode_addfb2() instead with the
format value that has been passed to it as a parameter (see commit
6ae2ff23aa43 ("drm/client: Convert drm_client_buffer_addfb() to drm_mode_addfb2()").
That format parameter is determined in drm_fbdev_generic_helper_fb_probe()
via the drm_mode_legacy_fb_format() function - which only generates
formats suitable for little endian devices. So to fix this issue
switch to drm_driver_legacy_fb_format() here instead to take the
device endianness into consideration.
Fixes: 6ae2ff23aa43 ("drm/client: Convert drm_client_buffer_addfb() to drm_mode_addfb2()")
Closes: https://issues.redhat.com/browse/RHEL-45158
Signed-off-by: Thomas Huth <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Acked-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Tested-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
A sync-only job is meant to provide a synchronization point on a
queue, so we can't return a NULL fence there, we have to add a signal
operation to the command stream which executes after all other
previously submitted jobs are done.
v2:
- Fixed a UAF bug
- Added R-bs
Fixes: de8548813824 ("drm/panthor: Add the scheduler logical block")
Signed-off-by: Boris Brezillon <[email protected]>
Reviewed-by: Liviu Dudau <[email protected]>
Reviewed-by: Steven Price <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The user is likely to leave all the drm_panthor_obj_array fields
to zero when the array is empty, which will cause an EINVAL failure.
v2:
- Added R-bs
Fixes: 4bdca1150792 ("drm/panthor: Add the driver frontend block")
Signed-off-by: Boris Brezillon <[email protected]>
Reviewed-by: Liviu Dudau <[email protected]>
Reviewed-by: Steven Price <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Ast has no special requirements for runtime power management. So
replace drm_atomic_helper_commit_tail_rpm() with the regular helper
drm_atomic_helper_commit_tail().
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Jocelyn Falempe <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The function ast_crtc_dpms() is left over from when the ast driver
did not implement atomic modesetting. But DPMS is not supported by
atomic modesetting and the helper is only called to enable or
disable the CRTC sync pulses. Inline the function into its callers.
To disable the CRTC, ast sets (AST_DPMS_VSYNC_OFF | AST_DPMS_HSYNC_OFF)
in VGACRB6. Replace the constants with the correct register constants
for VGACRB6.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Jocelyn Falempe <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|