aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-09-15arm64: dts: qcom: apq8016-sbc: Define leds outside of soc nodeStephan Gerhold1-52/+52
The leds node does not use any memory regions of the SoC and should therefore be declared outside the "soc" node. Signed-off-by: Stephan Gerhold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2020-09-15arm64: dts: qcom: msm8916: Declare sound node in msm8916.dtsiStephan Gerhold2-5/+8
The "sound" node in apq8016-sbc.dtsi references memory regions provided by the SoC and should be therefore declared in msm8916.dtsi. Additionally, the machine driver used for the "qcom,apq8016-sbc-sndcard" compatible also works on other MSM8916 devices (provided that audio routing is set up properly). It is not really specific to apq8016-sbc. Simplify setting up sound on other boards by moving the common part to msm8916.dtsi. This also allows referencing the node by the label, so that we can eventually drop the "soc" node entirely from the board-specific device tree part and use labels exclusively. Cc: Srinivas Kandagatla <[email protected]> Signed-off-by: Stephan Gerhold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2020-09-15arm64: dts: qcom: apq8016-sbc: Remove properties that are already defaultStephan Gerhold1-18/+0
apq8016-sbc.dtsi overrides several properties that are already the default in msm8916.dtsi. Remove these to simplify the device tree a bit. Signed-off-by: Stephan Gerhold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2020-09-15arch64: dts: qcom: sm8250: add uart nodesDmitry Baryshkov1-0/+74
Currently sm8250.dtsi only defines default debug uart. Port rest uart nodes from the downstream dtsi file. Acked-by: Manivannan Sadhasivam <[email protected]> Signed-off-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2020-09-15arm64: dts: qcom: sc7180-trogdor: Add wakeup support for BT UARTsatya priya1-0/+54
Add the necessary pinctrl, interrupt property and a suitable sleep config to support Bluetooth wakeup feature. GPIO mode is configured in sleep state to drive the RTS/RFR line low. If QUP function is selected in sleep state, UART RTS/RFR is pulled high during suspend and BT SoC not able to send wakeup bytes. Tested-by: Matthias Kaehlcke <[email protected]> Reviewed-by: Matthias Kaehlcke <[email protected]> Reviewed-by: Douglas Anderson <[email protected]> Signed-off-by: satya priya <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2020-09-15arm64: dts: qcom: sc7180: Add wakeup support for BT UART on sc7180-idpsatya priya1-0/+55
Add the necessary pinctrl, interrupt property and a suitable sleep config to support Bluetooth wakeup feature. GPIO mode is configured in sleep state to drive the RTS/RFR line low. If QUP function is selected in sleep state, UART RTS/RFR is pulled high during suspend and BT SoC not able to send wakeup bytes. Reviewed-by: Matthias Kaehlcke <[email protected]> Reviewed-by: Douglas Anderson <[email protected]> Signed-off-by: satya priya <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2020-09-15arm64: dts: qcom: sc7180: Improve the uart3 pin config for sc7180-idpsatya priya1-6/+4
Remove output-high from CTS and TX as this is not really required. During bringup to fix transfer failures this was added to match with console uart settings. Probably some boot loader config was missing then. As it is working fine now, remove it. Signed-off-by: satya priya <[email protected]> Reviewed-by: Matthias Kaehlcke <[email protected]> Reviewed-by: Douglas Anderson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2020-09-14arm64: dts: qcom: trogdor: Add labels for type-c portsStephen Boyd1-2/+2
Some trogdor board variants only have one USB port, so add a couple labels to these ports so we can modify them later. Reviewed-by: Douglas Anderson <[email protected]> Cc: Douglas Anderson <[email protected]> Signed-off-by: Stephen Boyd <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2020-09-14arm64: dts: meson: vim3l: remove sound card definitionJerome Brunet1-86/+0
The sound card definition should have been removed when the common definition was added to the vim3 dtsi but this slips through. Remove it now. Fixes: 7c9c06246cea ("arm64: dts: meson: vim3: make sound card common to all variants") Signed-off-by: Jerome Brunet <[email protected]> Signed-off-by: Kevin Hilman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-14ARM: dts: hisilicon: Fix SP805 clocksAndre Przywara1-2/+3
The SP805 DT binding requires two clocks to be specified, but Hisilicon platform DTs currently only specify one clock. In practice, Linux would pick a clock named "apb_pclk" for the bus clock, and the Linux and U-Boot SP805 driver would use the first clock to derive the actual watchdog counter frequency. Since currently both are the very same clock, we can just double the clock reference, and add the correct clock-names, to match the binding. Signed-off-by: Andre Przywara <[email protected]> Signed-off-by: Wei Xu <[email protected]>
2020-09-14ARM: dts: hisilicon: Fix SP804 usersAndre Przywara2-12/+22
The SP804 binding only specifies one or three clocks, but does not allow just two clocks. The HiSi 3620 .dtsi specified two clocks for the two timers, plus gave one "apb_pclk" clock-name to appease the primecell bus driver. Extend the clocks by duplicating the first clock to the end of the clock list, and add two dummy clock-names to make the primecell driver happy. I don't know what the real APB clock for the IP is, but with the current DT the first timer clock was used for that, so this change keeps the current status. Signed-off-by: Andre Przywara <[email protected]> Signed-off-by: Wei Xu <[email protected]>
2020-09-14arm64: dts: hisilicon: Fix SP805 clocksAndre Przywara2-6/+9
The SP805 DT binding requires two clocks to be specified, but Hisilicon platform DTs currently only specify one clock. In practice, Linux would pick a clock named "apb_pclk" for the bus clock, and the Linux and U-Boot SP805 driver would use the first clock to derive the actual watchdog counter frequency. Since currently both are the very same clock, we can just double the clock reference, and add the correct clock-names, to match the binding. Signed-off-by: Andre Przywara <[email protected]> Signed-off-by: Wei Xu <[email protected]>
2020-09-14arm64: dts: hisilicon: replace status value "ok" by "okay"Adrian Schmutzler7-36/+36
While the DT parser recognizes "ok" as a valid value for the "status" property, it is actually mentioned nowhere. Use the proper value "okay" instead, as done in the majority of files already. Signed-off-by: Adrian Schmutzler <[email protected]> Signed-off-by: Wei Xu <[email protected]>
2020-09-14arm64: dts: qcom: pm660: Fix missing pound sign in interrupt-cellsŁukasz Patron1-1/+1
Also add a space after '=' while at it. Tested-by: Konrad Dybcio <[email protected]> Signed-off-by: Łukasz Patron <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2020-09-14arm64: dts: qcom: sc7180: Drop flags on mdss irqsStephen Boyd1-2/+2
The number of interrupt cells for the mdss interrupt controller is 1, meaning there should only be one cell for the interrupt number, not two where the second cell is the irq flags. Drop the second cell to match the binding. Cc: Kalyan Thota <[email protected]> Cc: Harigovindan P <[email protected] Fixes: a3db7ad1af49 ("arm64: dts: sc7180: add display dt nodes") Signed-off-by: Stephen Boyd <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2020-09-13dt-bindings: qcom: Add ipq8074 bindingsGokul Sriram Palanisamy1-0/+4
Document the new device-tree bindings for boards HK10-C1 and HK10-C2 based on ipq8074 SoC. Acked-by: Rob Herring <[email protected]> Signed-off-by: Gokul Sriram Palanisamy <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2020-09-13arm64: dts: ipq8074: Use the A53 PMU compatibleKathiravan T1-1/+1
IPQ8074 has A53 cores, so lets use the corresponding PMU compatible. Signed-off-by: Kathiravan T <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2020-09-13arm64: dts: ipq6018: enable DVFS supportKathiravan T1-3/+93
Add A53 PLL, APCS clock, RPM Glink, RPM message RAM, cpu-opp-table, SMPA2 regulator to enable the cpu frequency on IPQ6018. Co-developed-by: Sivaprakash Murugesan <[email protected]> Signed-off-by: Sivaprakash Murugesan <[email protected]> Signed-off-by: Kathiravan T <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2020-09-13dt-bindings: mailbox: add compatible for the IPQ6018 SoCKathiravan T1-0/+1
Add the mailbox compatible for the IPQ6018 SoC. Acked-by: Rob Herring <[email protected]> Signed-off-by: Kathiravan T <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2020-09-13arm64: dts: qcom: replace status value "ok" by "okay"Adrian Schmutzler6-30/+30
While the DT parser recognizes "ok" as a valid value for the "status" property, it is actually mentioned nowhere. Use the proper value "okay" instead, as done in the majority of files already. Signed-off-by: Adrian Schmutzler <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2020-09-13arm64: dts: ipq8074: enable watchdog supportKathiravan T1-0/+8
Enable watchdog support for the IPQ8074 SoCs. Signed-off-by: Kathiravan T <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2020-09-13arm64: dts: qcom: sm8250: use the right clock-freqency for sleep-clkJonathan Marek1-1/+1
Downstream has this clock as 32000 rate, but testing shows it is close to 32768. Signed-off-by: Jonathan Marek <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2020-09-13arm64: dts: qcom: Add sc7180-lazor sku2Douglas Anderson2-0/+18
Add a new SKU variant. This is a pick from the downstream tree that is the current source of truth for this platform. Link: https://crrev.com/c/2386997 Signed-off-by: Douglas Anderson <[email protected]> Link: https://lore.kernel.org/r/20200908133037.1.Ia98a6b938453254e360c4a9fa253d2d6807dff3f@changeid Signed-off-by: Bjorn Andersson <[email protected]>
2020-09-13arm64: dts: qcom: sc7180: Remove clock for bluetooth on SC7180 IDP boardVenkata Lakshmi Narayana Gubba1-1/+0
Removed voting for RPMH_RF_CLK2 which is not required as it is getting managed by BT SoC through SW_CTRL line. Signed-off-by: Venkata Lakshmi Narayana Gubba <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2020-09-13arm64: dts: qcom: sm8250-mtp: add i2c device tree nodesDmitry Baryshkov1-0/+28
Add device tree nodes describing used i2c busses according to the dts found in msm-4.19 tree. Signed-off-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2020-09-13arm64: dts: qcom: sm8250: add bi_tcxo_ao to gcc clocksDmitry Baryshkov1-2/+6
Signed-off-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2020-09-13Merge tag 'arm-soc/for-5.10/devicetree-arm64' of ↵Olof Johansson3-3/+3
https://github.com/Broadcom/stblinux into arm/dt This pull request contains Broadcom ARM64-based SoCs changes for 5.10, please pull the following: - Adrian changes the status properties from "ok" to "okay" - Andre fixes the SP805 watchdog nodes to have the correct clock names and binding for the Northstar 2 platform * tag 'arm-soc/for-5.10/devicetree-arm64' of https://github.com/Broadcom/stblinux: arm64: dts: broadcom: Fix SP805 clock-names arm64: dts: broadcom: replace status value "ok" by "okay" Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2020-09-13Merge tag 'arm-soc/for-5.10/devicetree' of ↵Olof Johansson10-10/+399
https://github.com/Broadcom/stblinux into arm/dt This pull request contains Broadcom ARM-based SoCs changes for 5.10, please pull the following: - Christian adds support for the Cisco Meraki MR32 which is based on the BCM53016 SoC, this requires specifying the PWM, second UART and third PCIe controller in Device Tree before finally adding support for the board. - Adrian updates the status properties from "ok" to "okay". - Andre fixes the SP805 watchdog nodes to have the correct clock names and binding for both the Cygnus and Northstar Plus (NSP). He does the same thing with the SP804 timer node which was missing an "arm,primecell" compatible string. - Maxime enables the BCM2711 (Raspberry Pi 4) display pipeline since all DRM changes are ready. * tag 'arm-soc/for-5.10/devicetree' of https://github.com/Broadcom/stblinux: ARM: dts: broadcom: Fix SP804 node ARM: dts: NSP: Fix SP805 clock-names ARM: dts: Cygnus: Fix SP805 clocks ARM: dts: NSP: replace status value "ok" by "okay" ARM: BCM5301X: Add DT for Meraki MR32 ARM: dts: bcm2711: Enable the display pipeline ARM: dts: BCM5301X: Specify pcie2 in the DT ARM: dts: BCM5301X: Specify uart2 in the DT ARM: dts: BCM5301X: Specify PWM in the DT dt-bindings: ARM: add bindings for the Meraki MR32 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2020-09-13Merge tag 'dt-schema-5.10' of ↵Olof Johansson6-6/+6
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Various minor cleanups for ARM DTS Cleanup ARM DTS to remove dtschema validation errors. * tag 'dt-schema-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: alpine: Align GIC nodename with dtschema ARM: dts: zx: Align L2 cache-controller nodename with dtschema ARM: dts: tango: Align L2 cache-controller nodename with dtschema ARM: dts: spear: Align L2 cache-controller nodename with dtschema ARM: dts: qcom: Align L2 cache-controller nodename with dtschema ARM: dts: prima: Align L2 cache-controller nodename with dtschema Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2020-09-13Merge tag 'dt64-schema-5.10' of ↵Olof Johansson1-1/+1
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Various minor cleanups for arm64 Amazon DTS Cleanup arm64 DTS to remove dtschema validation errors. * tag 'dt64-schema-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: alpine: Fix GIC unit address arm64: dts: alpine: Align GIC nodename with dtschema Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2020-09-13Merge tag 'aspeed-5.10-devicetree' of ↵Olof Johansson11-21/+1193
git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt ASPEED device tree updates for 5.10 - New machines * Wistron Mowgli, an AST2500 BMC for a Power9 OpenPower server * Facebook Wedge400, an AST2500 BMC system which we can assume is 4 times better than the existing Wedge100 top of rack network switch - Add a new device, the IBM Operation Panel - Fixes for Facebook's collection of BMCs - eMMC and vuart fixes * tag 'aspeed-5.10-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: dts: aspeed: Add Mowgli BMC platform ARM: dts: rainier: Disable internal pull-downs on eMMC pins ARM: aspeed: g5: Do not set sirq polarity ARM: dts: aspeed: rainier: Add IBM Operation Panel I2C device ARM: dts: aspeed: tacoma: Add IBM Operation Panel I2C device ARM: dts: aspeed: rainier: Enable XDMA engine ARM: dts: aspeed: wedge40: Update UART4 pin settings ARM: dts: aspeed: wedge40: Update FMC flash0 label ARM: dts: aspeed: Add Facebook Wedge400 BMC ARM: dts: aspeed: minipack: Update 64MB FMC flash layout ARM: dts: aspeed: yamp: Set 32MB FMC flash layout ARM: dts: aspeed: cmm: Set 32MB FMC flash layout ARM: dts: aspeed: Remove flash layout from Facebook AST2500 Common dtsi Link: https://lore.kernel.org/r/CACPK8XcDNBYAHzW6NYB4LFm3YbN63AprgW75ZqS+6uXn2b3kug@mail.gmail.com Signed-off-by: Olof Johansson <[email protected]>
2020-09-13Merge tag 'juno-updates-5.10' of ↵Olof Johansson11-27/+29
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/dt ARMv8 Juno/Vexpress/Fast Models updates for v5.10 A few device tree source fixes to make them fully SP804 timer and SP805 watchdog binding compliant. * tag 'juno-updates-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: arm64: dts: arm: Fix SP805 clock-names ARM: dts: arm: Fix SP805 clocks ARM: dts: arm: Fix SP804 users Link: https://lore.kernel.org/r/20200908135028.GA10106@bogus Signed-off-by: Olof Johansson <[email protected]>
2020-09-13Merge tag 'samsung-dt64-5.10' of ↵Olof Johansson2-5/+5
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM64 changes for v5.10 Cleanup of Exynos DTS to fix as many dtschema warnings as possible. This includes adding missing compatibles and using non-deprecated properties. Changes should not have a visible impact. * tag 'samsung-dt64-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: Add compatibles to sysreg nodes arm64: dts: exynos: Replace deprecated "gpios" i2c-gpio property in Exynos5433 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2020-09-13Merge tag 'samsung-dt-5.10' of ↵Olof Johansson38-361/+893
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.10 1. Add sound support to Galaxy S3/Midas family (Exynos4412). 2. Add sound support to Galaxy S/Aries family (S5Pv210). 3. Configure L2C-310 cache controller via DTS on Exynos4. 4. Big cleanup of Exynos DTS to fix as many dtschema warnings as possible. This includes adding missing properties (thus e.g. enabling S3C RTC clock), correcting existing nodes, renaming of nodes and using non-deprecated properties or compatibles. Except mentioned bring up of S3C RTC, this should not have visible effect. * tag 'samsung-dt-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (49 commits) ARM: dts: exynos: Silence SATA PHY warning in Exynos5250 ARM: dts: exynos: Remove I2C9 samsung, i2c-slave-addr from Exynos5250 boards ARM: dts: samsung: odroid-xu3: Move assigned-clock* properties to i2s0 node ARM: dts: exynos: Use S2MPS11 clock in S3C RTC in SMDK5420 ARM: dts: exynos: Silence DP HPD pinctrl dtschema warning in Exynos5250 Spring ARM: dts: exynos: Use S5M8767 clock in S3C RTC in Exynos5250 Spring ARM: dts: exynos: Add max77686 clocks for S3C RTC in SMDK5250 ARM: dts: exynos: Override thermal by label in Exynos5250 ARM: dts: exynos: Correct whitespace and indentation issues in Exynos5 ARM: dts: exynos: Silence i2c-gpio dtschema warning in Exynos5250 Arndale ARM: dts: exynos: Correct S3C RTC bindings in SMDK5410 ARM: dts: exynos: Remove unneeded address/size cells in Exynos5260 GIC ARM: dts: exynos: Correct compatible for Exynos5260 GIC ARM: dts: exynos: Correct compatible for Exynos5 GIC ARM: dts: s5pv210: Enable audio on Aries boards ARM: dts: exynos: Correct whitespace and indentation issues ARM: dts: exynos: Correct S3C RTC bindings in Tiny4412 ARM: dts: exynos: Correct S3C RTC bindings in SMDK4412 ARM: dts: exynos: Add CPU cooling in Tiny4412 ARM: dts: exynos: Add CPU cooling in SMDK4412 ... Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2020-09-13Merge tag 'renesas-arm-dt-for-v5.10-tag1' of ↵Olof Johansson14-94/+2367
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.10 - Increase support for the RZ/G2H SoC on the HopeRun HiHope RZ/G2H board, and its display panel expansion board, - Increase support for the RZ/G1H SoC on the iWave RainboW SoM (G21M) and Qseven board (G21D), - SATA support for the HopeRun HiHope RZ/G2N board, - PCIe endpoint support for the RZ/G2M, RZ/G2E, and RZ/G2H SoCs, - Audio support for the R-Car M3-W+ SoC. - Minor fixes and improvements. * tag 'renesas-arm-dt-for-v5.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (39 commits) arm64: dts: renesas: Add HiHope RZ/G2H board with idk-1110wr display arm64: dts: renesas: r8a774e1: Add cpuidle support for CA5x cores arm64: dts: renesas: r8a774e1: Add FDP1 device nodes ARM: dts: r8a7742-iwg21d-q7: Enable PCIe Controller ARM: dts: r8a7742: Add IPMMU DT nodes arm64: dts: renesas: r8a77961: Enable Sound / Audio-DMAC arm64: dts: renesas: r8a774e1: Add PWM device nodes ARM: dts: r8a7742-iwg21m: Add SPI NOR support arm64: dts: renesas: r8a774e1-hihope-rzg2h: Enable HS400 mode ARM: dts: r8a7742-iwg21m: Add RTC support ARM: dts: r8a7742-iwg21m: Sort the nodes alphabetically ARM: dts: r8a7742: Add CAN support arm64: dts: renesas: r8a774c0: Add PCIe EP node arm64: dts: renesas: r8a774b1: Add PCIe EP nodes arm64: dts: renesas: r8a774a1: Add PCIe EP nodes ARM: dts: r8a7742: Add QSPI support arm64: dts: renesas: r8a774e1-hihope-rzg2h: Setup DU clocks arm64: dts: renesas: r8a774e1: Add LVDS device node arm64: dts: renesas: r8a774e1: Populate HDMI encoder node arm64: dts: renesas: r8a774e1: Populate DU device node ... Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2020-09-13Merge tag 'omap-for-v5.10/dt-signed' of ↵Olof Johansson16-442/+509
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Devicetree changes for omaps for v5.10 - Use a known good SGX clockrate for 4430, this is not needed as a fix as the closed source SGX driver is out of tree - Prepare DSI panels for upcoming changes to use generic driver code - Add common support for MOXA UC-8100 series - Add ocp label for l3 interconnect for board specific dts files to reference - Configure CPU thermal properties for omap3 * tag 'omap-for-v5.10/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap3: Add cpu trips and cooling map for omap34/36 families ARM: dts: am33xx: add ocp label ARM: dts: am335x: add common dtsi for MOXA UC-8100 series ARM: dts: omap4-droid4: add panel orientation ARM: dts: omap4-droid4: add panel compatible ARM: dts: omap: add channel to DSI panels ARM: dts: omap4: Fix sgx clock rate for 4430 ARM: dts: omap5: Fix DSI base address and clocks ARM: dts: logicpd-som-lv-baseboard: Fix missing video ARM: dts: logicpd-som-lv-baseboard: Fix broken audio ARM: dts: logicpd-torpedo-baseboard: Fix broken audio ARM: OMAP2+: Fix an IS_ERR() vs NULL check in _get_pwrdm() Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2020-09-13arm64: dts: imx8mm-var-som-symphony: Drop unused gpioledgrpKrzysztof Kozlowski1-6/+0
The gpioledgrp in iomux is not used, so it can be dropped. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-09-13ARM: dts: imx6qdl-tqma6: fix LM75 compatible stringMatthias Schiffer2-2/+2
Specify the National LM75 sensor including its vendor name, as mandated by the binding docs. Fixes: cac849e9bbc8 ("ARM: dts: imx6qdl: add TQMa6{S,Q,QP} SoM") Signed-off-by: Matthias Schiffer <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-09-13ARM: dts: imx6qdl-tqma6: remove obsolete fsl,spi-num-chipselectsMatthias Schiffer1-1/+0
This property is unneeded and not supported by the spi-imx driver. Signed-off-by: Matthias Schiffer <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-09-13ARM: dts: imx6qdl-tqma6: fix indentationMatthias Schiffer1-94/+94
The PMIC configuration is indented one level too deep. Signed-off-by: Matthias Schiffer <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-09-13arm64: dts: imx8mq-librem5: Add interrupt-names to ti,tps6598xKrzysztof Kozlowski1-0/+1
The ti,tps6598x binding requires interrupt-names property. The driver does not really use it but the hardware could have more interrupt lines connected. This fixes dtbs_check warning: arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dt.yaml: usb-pd@3f: 'interrupt-names' is a required property Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-09-13arm64: dts: imx8mq-librem5: Drop interrupt-names in PMICKrzysztof Kozlowski2-2/+0
The 'interrupt-names' property is not described in dtschema, not used by the driver and does not really make sense as its value is simple 'irq'. Drop it to fix dtbs_check warnings like: arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dt.yaml: pmic@4b: 'interrupt-names' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-09-13arm64: dts: imx8mq-librem5: Align regulator names with schemaKrzysztof Kozlowski1-15/+15
Device tree schema expects regulator names to be lowercase. This fixes dtbs_check warnings like: pmic@4b: regulators:LDO1:regulator-name:0: 'LDO1' does not match '^ldo[1-7]$' Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-09-13arm64: dts: imx8mq: Add missing interrupts to GPCKrzysztof Kozlowski1-0/+1
The i.MX General Power Controller v2 device node was missing interrupts property necessary to route its interrupt to GIC. This also fixes the dbts_check warnings like: arch/arm64/boot/dts/freescale/imx8mq-evk.dt.yaml: gpc@303a0000: {'compatible': ... '$nodename': ['gpc@303a0000']} is not valid under any of the given schemas arch/arm64/boot/dts/freescale/imx8mq-evk.dt.yaml: gpc@303a0000: 'interrupts' is a required property Fixes: fdbcc04da246 ("arm64: dts: imx8mq: add GPC power domains") Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Lucas Stach <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-09-13arm64: dts: imx8mp-evk: Align pin configuration group names with schemaKrzysztof Kozlowski1-6/+6
Device tree schema expects pin configuration groups to end with 'grp' suffix, otherwise dtbs_check complain with a warning like: ... 'usdhc3grp-100mhz', 'usdhc3grp-200mhz' do not match any of the regexes: 'grp$', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Lucas Stach <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-09-13arm64: dts: imx8mm-var-som-symphony: Use newer interrupts propertyKrzysztof Kozlowski1-1/+1
The int-gpios was deprecated in favor of generic interrupts property. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-09-12arm64: dts: qcom: Add support for Xiaomi Poco F1 (Beryllium)Amit Pundir2-0/+381
Add initial dts support for Xiaomi Poco F1 (Beryllium). This initial support is based on upstream Dragonboard 845c (sdm845) device. With this dts, Beryllium boots AOSP up to ADB shell over USB-C. Supported functionality includes UFS, USB-C (peripheral), microSD card and Vol+/Vol-/power keys. Bluetooth should work too but couldn't be verified from adb command line, it is verified when enabled from UI with few WIP display patches. Just like initial db845c support, initializing the SMMU is clearing the mapping used for the splash screen framebuffer, which causes the device to hang during boot and recovery needs a hard power reset. This can be worked around using: fastboot oem select-display-panel none To switch ON the display back run: fastboot oem select-display-panel But this only works on Beryllium devices running bootloader version BOOT.XF.2.0-00369-SDM845LZB-1 that shipped with Android-9 based release. Newer bootloader version do not support switching OFF the display panel at all. Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Amit Pundir <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2020-09-11ARM: dts: alpine: Align GIC nodename with dtschemaKrzysztof Kozlowski1-1/+1
Fix dtschema validator warnings like: gic@fb001000: $nodename:0: 'gic@fb001000' does not match '^interrupt-controller(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski <[email protected]>
2020-09-11ARM: dts: zx: Align L2 cache-controller nodename with dtschemaKrzysztof Kozlowski1-1/+1
Fix dtschema validator warnings like: l2-cache-controller@c00000: $nodename:0: 'l2-cache-controller@c00000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Jun Nie <[email protected]>
2020-09-11ARM: dts: tango: Align L2 cache-controller nodename with dtschemaKrzysztof Kozlowski1-1/+1
Fix dtschema validator warnings like: l2-cache-controller@20100000: $nodename:0: 'l2-cache-controller@20100000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Mans Rullgard <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.