diff options
author | Olof Johansson <[email protected]> | 2020-09-13 11:34:24 -0700 |
---|---|---|
committer | Olof Johansson <[email protected]> | 2020-09-13 11:34:25 -0700 |
commit | ba601120cfbdcd0dd9c6795f9e2c551f11e38326 (patch) | |
tree | 34e7f10d4e7f2efa71a2afdc10240d9fdcd488dc | |
parent | 439a95a044223972a9128d32df7f78f56c99ef51 (diff) | |
parent | 1a4a752ee876b7c7d775d73c51decdbf852ba4d5 (diff) |
Merge tag 'arm-soc/for-5.10/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs changes for 5.10,
please pull the following:
- Christian adds support for the Cisco Meraki MR32 which is based on the
BCM53016 SoC, this requires specifying the PWM, second UART and third
PCIe controller in Device Tree before finally adding support for the
board.
- Adrian updates the status properties from "ok" to "okay".
- Andre fixes the SP805 watchdog nodes to have the correct clock names
and binding for both the Cygnus and Northstar Plus (NSP). He does the
same thing with the SP804 timer node which was missing an
"arm,primecell" compatible string.
- Maxime enables the BCM2711 (Raspberry Pi 4) display pipeline since all
DRM changes are ready.
* tag 'arm-soc/for-5.10/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: broadcom: Fix SP804 node
ARM: dts: NSP: Fix SP805 clock-names
ARM: dts: Cygnus: Fix SP805 clocks
ARM: dts: NSP: replace status value "ok" by "okay"
ARM: BCM5301X: Add DT for Meraki MR32
ARM: dts: bcm2711: Enable the display pipeline
ARM: dts: BCM5301X: Specify pcie2 in the DT
ARM: dts: BCM5301X: Specify uart2 in the DT
ARM: dts: BCM5301X: Specify PWM in the DT
dt-bindings: ARM: add bindings for the Meraki MR32
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Olof Johansson <[email protected]>
-rw-r--r-- | Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/Makefile | 1 | ||||
-rw-r--r-- | arch/arm/boot/dts/bcm-cygnus.dtsi | 4 | ||||
-rw-r--r-- | arch/arm/boot/dts/bcm-nsp.dtsi | 6 | ||||
-rw-r--r-- | arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 48 | ||||
-rw-r--r-- | arch/arm/boot/dts/bcm2711.dtsi | 122 | ||||
-rw-r--r-- | arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 197 | ||||
-rw-r--r-- | arch/arm/boot/dts/bcm5301x.dtsi | 25 | ||||
-rw-r--r-- | arch/arm/boot/dts/bcm958525xmc.dts | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/bcm958625k.dts | 2 |
10 files changed, 399 insertions, 10 deletions
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml index d48313c7ae45..988e0bbb2a62 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml @@ -83,6 +83,8 @@ properties: - brcm,bcm953012er - brcm,bcm953012hr - brcm,bcm953012k + - meraki,mr32 - const: brcm,brcm53012 + - const: brcm,brcm53016 - const: brcm,bcm4708 ... diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f0062f991744..d05d1cbc999a 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -127,6 +127,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm47094-luxul-xwr-3150-v1.dtb \ bcm47094-netgear-r8500.dtb \ bcm47094-phicomm-k3.dtb \ + bcm53016-meraki-mr32.dtb \ bcm94708.dtb \ bcm94709.dtb \ bcm953012er.dtb \ diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 35bdd0969f0a..dacaef2c14ca 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -234,8 +234,8 @@ compatible = "arm,sp805" , "arm,primecell"; reg = <0x18009000 0x1000>; interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&axi81_clk>; - clock-names = "apb_pclk"; + clocks = <&axi81_clk>, <&axi81_clk>; + clock-names = "wdog_clk", "apb_pclk"; }; gpio_ccm: gpio@1800a000 { diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 0346ea621f0f..8ba5097157e1 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -368,7 +368,7 @@ }; ccbtimer0: timer@34000 { - compatible = "arm,sp804"; + compatible = "arm,sp804", "arm,primecell"; reg = <0x34000 0x1000>; interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; @@ -377,7 +377,7 @@ }; ccbtimer1: timer@35000 { - compatible = "arm,sp804"; + compatible = "arm,sp804", "arm,primecell"; reg = <0x35000 0x1000>; interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; @@ -438,7 +438,7 @@ reg = <0x39000 0x1000>; interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; clocks = <&iprocslow>, <&iprocslow>; - clock-names = "wdogclk", "apb_pclk"; + clock-names = "wdog_clk", "apb_pclk"; }; lcpll0: lcpll0@3f100 { diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts index 222d7825e1ab..ca24c2c737ab 100644 --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts @@ -68,6 +68,14 @@ }; }; +&ddc0 { + status = "okay"; +}; + +&ddc1 { + status = "okay"; +}; + &firmware { firmware_clocks: clocks { compatible = "raspberrypi,firmware-clocks"; @@ -163,6 +171,38 @@ "RGMII_TXD3"; }; +&hdmi0 { + clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>; + clock-names = "hdmi", "bvb", "audio", "cec"; + status = "okay"; +}; + +&hdmi1 { + clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>; + clock-names = "hdmi", "bvb", "audio", "cec"; + status = "okay"; +}; + +&hvs { + clocks = <&firmware_clocks 4>; +}; + +&pixelvalve0 { + status = "okay"; +}; + +&pixelvalve1 { + status = "okay"; +}; + +&pixelvalve2 { + status = "okay"; +}; + +&pixelvalve4 { + status = "okay"; +}; + &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>; @@ -231,3 +271,11 @@ &vchiq { interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; }; + +&vc4 { + status = "okay"; +}; + +&vec { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi index 00bcaed1be32..4847dd305317 100644 --- a/arch/arm/boot/dts/bcm2711.dtsi +++ b/arch/arm/boot/dts/bcm2711.dtsi @@ -12,6 +12,18 @@ interrupt-parent = <&gicv2>; + vc4: gpu { + compatible = "brcm,bcm2711-vc5"; + status = "disabled"; + }; + + clk_27MHz: clk-27M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <27000000>; + clock-output-names = "27MHz-clock"; + }; + clk_108MHz: clk-108M { #clock-cells = <0>; compatible = "fixed-clock"; @@ -238,6 +250,27 @@ status = "disabled"; }; + pixelvalve0: pixelvalve@7e206000 { + compatible = "brcm,bcm2711-pixelvalve0"; + reg = <0x7e206000 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + pixelvalve1: pixelvalve@7e207000 { + compatible = "brcm,bcm2711-pixelvalve1"; + reg = <0x7e207000 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + pixelvalve2: pixelvalve@7e20a000 { + compatible = "brcm,bcm2711-pixelvalve2"; + reg = <0x7e20a000 0x100>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + pwm1: pwm@7e20c800 { compatible = "brcm,bcm2835-pwm"; reg = <0x7e20c800 0x28>; @@ -248,10 +281,25 @@ status = "disabled"; }; - hvs@7e400000 { + pixelvalve4: pixelvalve@7e216000 { + compatible = "brcm,bcm2711-pixelvalve4"; + reg = <0x7e216000 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + hvs: hvs@7e400000 { + compatible = "brcm,bcm2711-hvs"; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; }; + pixelvalve3: pixelvalve@7ec12000 { + compatible = "brcm,bcm2711-pixelvalve3"; + reg = <0x7ec12000 0x100>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + dvp: clock@7ef00000 { compatible = "brcm,brcm2711-dvp"; reg = <0x7ef00000 0x10>; @@ -259,6 +307,78 @@ #clock-cells = <1>; #reset-cells = <1>; }; + + hdmi0: hdmi@7ef00700 { + compatible = "brcm,bcm2711-hdmi0"; + reg = <0x7ef00700 0x300>, + <0x7ef00300 0x200>, + <0x7ef00f00 0x80>, + <0x7ef00f80 0x80>, + <0x7ef01b00 0x200>, + <0x7ef01f00 0x400>, + <0x7ef00200 0x80>, + <0x7ef04300 0x100>, + <0x7ef20000 0x100>; + reg-names = "hdmi", + "dvp", + "phy", + "rm", + "packet", + "metadata", + "csc", + "cec", + "hd"; + clock-names = "hdmi", "bvb", "audio", "cec"; + resets = <&dvp 0>; + ddc = <&ddc0>; + dmas = <&dma 10>; + dma-names = "audio-rx"; + status = "disabled"; + }; + + ddc0: i2c@7ef04500 { + compatible = "brcm,bcm2711-hdmi-i2c"; + reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>; + reg-names = "bsc", "auto-i2c"; + clock-frequency = <97500>; + status = "disabled"; + }; + + hdmi1: hdmi@7ef05700 { + compatible = "brcm,bcm2711-hdmi1"; + reg = <0x7ef05700 0x300>, + <0x7ef05300 0x200>, + <0x7ef05f00 0x80>, + <0x7ef05f80 0x80>, + <0x7ef06b00 0x200>, + <0x7ef06f00 0x400>, + <0x7ef00280 0x80>, + <0x7ef09300 0x100>, + <0x7ef20000 0x100>; + reg-names = "hdmi", + "dvp", + "phy", + "rm", + "packet", + "metadata", + "csc", + "cec", + "hd"; + ddc = <&ddc1>; + clock-names = "hdmi", "bvb", "audio", "cec"; + resets = <&dvp 1>; + dmas = <&dma 17>; + dma-names = "audio-rx"; + status = "disabled"; + }; + + ddc1: i2c@7ef09500 { + compatible = "brcm,bcm2711-hdmi-i2c"; + reg = <0x7ef09500 0x100>, <0x7ef05b00 0x300>; + reg-names = "bsc", "auto-i2c"; + clock-frequency = <97500>; + status = "disabled"; + }; }; /* diff --git a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts new file mode 100644 index 000000000000..3b978dc8997a --- /dev/null +++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts @@ -0,0 +1,197 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Meraki MR32 / Codename: Espresso + * + * Copyright (C) 2018-2020 Christian Lamparter <[email protected]> + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" +#include <dt-bindings/leds/common.h> + +/ { + compatible = "meraki,mr32", "brcm,brcm53016", "brcm,bcm4708"; + model = "Meraki MR32"; + + chosen { + bootargs = " console=ttyS0,115200n8 earlycon"; + }; + + memory { + reg = <0x00000000 0x08000000>; + device_type = "memory"; + }; + + aliases { + serial1 = &uart2; + }; + + leds { + compatible = "gpio-leds"; + + sysled3 { + function = LED_FUNCTION_FAULT; + color = <LED_COLOR_ID_AMBER>; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; + panic-indicator; + }; + sysled2 { + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_WHITE>; + gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>; + }; + }; + + keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>; + }; + }; + + pwm-leds { + compatible = "pwm-leds"; + + red { + /* SYS-LED 1 - Tricolor */ + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_RED>; + pwms = <&pwm 0 50000 0>; + max-brightness = <255>; + }; + + green { + /* SYS-LED 1 - Tricolor */ + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_GREEN>; + pwms = <&pwm 1 50000 0>; + max-brightness = <255>; + }; + + blue { + /* SYS-LED 1 - Tricolor */ + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_BLUE>; + pwms = <&pwm 2 50000 0>; + max-brightness = <255>; + }; + }; + + i2c { + /* + * The platform provided I2C does not budge. + * This is a replacement until I can figure + * out what are the missing bits... + */ + + compatible = "i2c-gpio"; + sda-gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + scl-gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; + i2c-gpio,delay-us = <10>; /* close to 100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + + current_sense: ina219@45 { + compatible = "ti,ina219"; + reg = <0x45>; + shunt-resistor = <60000>; /* = 60 mOhms */ + }; + + eeprom: eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + read-only; + }; + }; +}; + +&uart0 { + clock-frequency = <62500000>; + /delete-property/ clocks; +}; + +&uart1 { + status = "disabled"; +}; + +&uart2 { + status = "okay"; + /* + * bluetooth-le { + * compatible = "brcm,bcm20732"; + * enable-gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>; + *}; + */ +}; + +&gmac1 { + status = "disabled"; +}; +&gmac2 { + status = "disabled"; +}; +&gmac3 { + status = "disabled"; +}; + +&pwm { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_pwm>; +}; + +&nandcs { + nand-ecc-algo = "hw"; + + partitions { + /* + * The partition autodetection does not work for this device. + * It will only detect the "nvram" partition with an incorrect size. + * [ 1.721667] 1 bcm47xxpart partitions found on MTD device brcmnand.0 + * [ 1.727962] Creating 1 MTD partitions on "brcmnand.0": + * [ 1.733117] 0x000000400000-0x000008000000 : "nvram" + */ + + compatible = "fixed-partitions"; + #address-cells = <0x1>; + #size-cells = <0x1>; + + partition0@0 { + label = "u-boot"; + reg = <0x0 0x100000>; + read-only; + }; + + partition1@100000 { + label = "bootkernel1"; + reg = <0x100000 0x300000>; + read-only; + }; + + partition2@400000 { + label = "nvram"; + reg = <0x400000 0x100000>; + read-only; + }; + + partition3@500000 { + label = "bootkernel2"; + reg = <0x500000 0x300000>; + read-only; + }; + + partition4@800000 { + label = "ubi"; + reg = <0x800000 0x7780000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 2d9b4dd05830..9d9e8fe3f6ae 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -252,6 +252,10 @@ reg = <0x00013000 0x1000>; }; + pcie2: pcie@14000 { + reg = <0x00014000 0x1000>; + }; + usb2: usb2@21000 { reg = <0x00021000 0x1000>; @@ -350,6 +354,14 @@ }; }; + pwm: pwm@18002000 { + compatible = "brcm,iproc-pwm"; + reg = <0x18002000 0x28>; + clocks = <&osc>; + #pwm-cells = <3>; + status = "disabled"; + }; + mdio: mdio@18003000 { compatible = "brcm,iproc-mdio"; reg = <0x18003000 0x8>; @@ -384,6 +396,15 @@ reg = <0x18105000 0x1000>; }; + uart2: serial@18008000 { + compatible = "ns16550a"; + reg = <0x18008000 0x20>; + clocks = <&iprocslow>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + status = "disabled"; + }; + i2c0: i2c@18009000 { compatible = "brcm,iproc-i2c"; reg = <0x18009000 0x50>; @@ -417,12 +438,12 @@ function = "spi"; }; - i2c { + pinmux_i2c: i2c { groups = "i2c_grp"; function = "i2c"; }; - pwm { + pinmux_pwm: pwm { groups = "pwm0_grp", "pwm1_grp", "pwm2_grp", "pwm3_grp"; function = "pwm"; diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts index 716da62f5788..21f922dc6019 100644 --- a/arch/arm/boot/dts/bcm958525xmc.dts +++ b/arch/arm/boot/dts/bcm958525xmc.dts @@ -196,7 +196,7 @@ }; &sdio { - status = "ok"; + status = "okay"; }; &uart0 { diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts index 7b84b54436ed..7782b61c51a1 100644 --- a/arch/arm/boot/dts/bcm958625k.dts +++ b/arch/arm/boot/dts/bcm958625k.dts @@ -208,7 +208,7 @@ &sdio { bus-width = <4>; no-1-8-v; - status = "ok"; + status = "okay"; }; &srab { |