aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-11-29drm/i915: Call intel_pre_plane_updates() also for pipes getting enabledVille Syrjälä1-1/+2
We used to call intel_pre_plane_updates() for any pipe going through a modeset whether the pipe was previously enabled or not. This in fact needed to apply all the necessary clock gating workarounds/etc. Restore the correct behaviour. Fixes: 39919997322f ("drm/i915: Disable all planes before modesetting any pipes") Reviewed-by: Jani Nikula <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit e0d5ce11ed0a21bb2bf328ad82fd261783c7ad88) Signed-off-by: Jani Nikula <[email protected]>
2023-11-29drm/i915: Also check for VGA converter in eDP probeVille Syrjälä1-6/+22
Unfortunately even the HPD based detection added in commit cfe5bdfb27fa ("drm/i915: Check HPD live state during eDP probe") fails to detect that the VBT's eDP/DDI-A is a ghost on Asus B360M-A (CFL+CNP). On that board eDP/DDI-A has its HPD asserted despite nothing being actually connected there :( The straps/fuses also indicate that the eDP port is present. So if one boots with a VGA monitor connected the eDP probe will mistake the DP->VGA converter hooked to DDI-E for an eDP panel on DDI-A. As a last resort check what kind of DP device we've detected, and if it looks like a DP->VGA converter then conclude that the eDP port should be ignored. Cc: [email protected] Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9636 Fixes: cfe5bdfb27fa ("drm/i915: Check HPD live state during eDP probe") Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Jani Nikula <[email protected]> (cherry picked from commit fcd479a79120bf0cd507d85f898297a3b868dda6) Signed-off-by: Jani Nikula <[email protected]>
2023-11-29drm/i915/gsc: Mark internal GSC engine with reserved uabi classTvrtko Ursulin1-17/+22
The GSC CS is not exposed to the user, so we skipped assigning a uabi class number for it. However, the trace logs use the uabi class and instance to identify the engine, so leaving uabi class unset makes the GSC CS show up as the RCS in those logs. Given that the engine is not exposed to the user, we can't add a new case in the uabi enum, so we insted internally define a kernel internal class as -1. At the same time remove special handling for the name and complete the uabi_classes array so internal class is automatically correctly assigned. Engine will show as 65535:0 other0 in the logs/traces which should be unique enough. v2: * Fix uabi class u8 vs u16 type confusion. Signed-off-by: Tvrtko Ursulin <[email protected]> Fixes: 194babe26bdc ("drm/i915/mtl: don't expose GSC command streamer to the user") Cc: Daniele Ceraolo Spurio <[email protected]> Cc: Alan Previn <[email protected]> Cc: Matt Roper <[email protected]> Reviewed-by: Daniele Ceraolo Spurio <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit dfed6b58d54f3a5d7e6bc1fb060e2c936330eba2) Signed-off-by: Jani Nikula <[email protected]>
2023-11-28bcachefs: Extra kthread_should_stop() calls for copygcKent Overstreet2-4/+10
This fixes a bug where going read-only was taking longer than it should have due to copygc forgetting to check kthread_should_stop() Additionally: fix a missing is_kthread check in bch2_move_ratelimit(). Signed-off-by: Kent Overstreet <[email protected]>
2023-11-28bcachefs: Convert gc_alloc_start() to for_each_btree_key2()Kent Overstreet1-4/+5
This eliminates some SRCU warnings: for_each_btree_key2() runs every loop iteration in a distinct transaction context. Signed-off-by: Kent Overstreet <[email protected]>
2023-11-28bcachefs: Fix race between btree writes and metadata dropKent Overstreet1-0/+4
btree writes update the btree node key after every write, in order to update sectors_written, and they also might need to drop pointers if one of the writes failed in a replicated btree node. But the btree node might also have had a pointer dropped while the write was in flight, by bch2_dev_metadata_drop(), and thus there was a bug where the btree node write would ovewrite the btree node's key with what it had at the start of the write. Fix this by dropping pointers not currently in the btree node key. Signed-off-by: Kent Overstreet <[email protected]>
2023-11-28bcachefs: move journal seq assertionKent Overstreet2-3/+3
journal_cur_seq() can legitimately be used outside of the journal lock, where this assert can race Signed-off-by: Kent Overstreet <[email protected]>
2023-11-28bcachefs: -EROFS doesn't count as move_extent_start_failKent Overstreet1-0/+4
The automated tests check if we've hit too many slowpath/error path events and fail the test - if we're just shutting down, that naturally shouldn't count. Signed-off-by: Kent Overstreet <[email protected]>
2023-11-28ravb: Fix races between ravb_tx_timeout_work() and net related opsYoshihiro Shimoda1-1/+10
Fix races between ravb_tx_timeout_work() and functions of net_device_ops and ethtool_ops by using rtnl_trylock() and rtnl_unlock(). Note that since ravb_close() is under the rtnl lock and calls cancel_work_sync(), ravb_tx_timeout_work() should calls rtnl_trylock(). Otherwise, a deadlock may happen in ravb_tx_timeout_work() like below: CPU0 CPU1 ravb_tx_timeout() schedule_work() ... __dev_close_many() // Under rtnl lock ravb_close() cancel_work_sync() // Waiting ravb_tx_timeout_work() rtnl_lock() // This is possible to cause a deadlock If rtnl_trylock() fails, rescheduling the work with sleep for 1 msec. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Yoshihiro Shimoda <[email protected]> Reviewed-by: Sergey Shtylyov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-11-28smb: client: report correct st_size for SMB and NFS symlinksPaulo Alcantara1-0/+2
We can't rely on FILE_STANDARD_INFORMATION::EndOfFile for reparse points as they will be always zero. Set it to symlink target's length as specified by POSIX. This will make stat() family of syscalls return the correct st_size for such files. Cc: [email protected] Signed-off-by: Paulo Alcantara (SUSE) <[email protected]> Signed-off-by: Steve French <[email protected]>
2023-11-28smb: client: fix missing mode bits for SMB symlinksPaulo Alcantara1-1/+1
When instantiating inodes for SMB symlinks, add the mode bits from @cifs_sb->ctx->file_mode as we already do for the other special files. Cc: [email protected] Signed-off-by: Paulo Alcantara (SUSE) <[email protected]> Signed-off-by: Steve French <[email protected]>
2023-11-29nouveau/gsp: replace zero-length array with flex-array member and use ↵Gustavo A. R. Silva2-2/+2
__counted_by Fake flexible arrays (zero-length and one-element arrays) are deprecated, and should be replaced by flexible-array members. So, replace zero-length array with a flexible-array member in `struct PACKED_REGISTRY_TABLE`. Also annotate array `entries` with `__counted_by()` to prepare for the coming implementation by GCC and Clang of the `__counted_by` attribute. Flexible array members annotated with `__counted_by` can have their accesses bounds-checked at run-time via `CONFIG_UBSAN_BOUNDS` (for array indexing) and `CONFIG_FORTIFY_SOURCE` (for strcpy/memcpy-family functions). This fixes multiple -Warray-bounds warnings: drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c:1069:29: warning: array subscript 0 is outside array bounds of 'PACKED_REGISTRY_ENTRY[0]' [-Warray-bounds=] drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c:1070:29: warning: array subscript 0 is outside array bounds of 'PACKED_REGISTRY_ENTRY[0]' [-Warray-bounds=] drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c:1071:29: warning: array subscript 0 is outside array bounds of 'PACKED_REGISTRY_ENTRY[0]' [-Warray-bounds=] drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c:1072:29: warning: array subscript 0 is outside array bounds of 'PACKED_REGISTRY_ENTRY[0]' [-Warray-bounds=] While there, also make use of the struct_size() helper, and address checkpatch.pl warning: WARNING: please, no spaces at the start of a line This results in no differences in binary output. Signed-off-by: Gustavo A. R. Silva <[email protected]> Reviewed-by: Kees Cook <[email protected]> Signed-off-by: Danilo Krummrich <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/ZVZbX7C5suLMiBf+@work
2023-11-29nouveau/gsp/r535: remove a stray unlock in r535_gsp_rpc_send()Dan Carpenter1-3/+1
This unlock doesn't belong here and it leads to a double unlock in the caller, r535_gsp_rpc_push(). Fixes: 176fdcbddfd2 ("drm/nouveau/gsp/r535: add support for booting GSP-RM") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Timur Tabi <[email protected]> Signed-off-by: Danilo Krummrich <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-11-29nouveau: find the smallest page allocation to cover a buffer alloc.Dave Airlie1-2/+3
With the new uapi we don't have the comp flags on the allocation, so we shouldn't be using the first size that works, we should be iterating until we get the correct one. This reduces allocations from 2MB to 64k in lots of places. Fixes dEQP-VK.memory.allocation.basic.size_8KiB.forward.count_4000 on my ampere/gsp system. Cc: [email protected] # v6.6 Signed-off-by: Dave Airlie <[email protected]> Reviewed-by: Faith Ekstrand <[email protected]> Signed-off-by: Danilo Krummrich <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-11-28ARM: dts: bcm2711-rpi-400: Fix delete-node of led_actStefan Wahren1-3/+1
The LED ACT which is included from bcm2711-rpi-4-b doesn't exists on the Raspberry Pi 400. So the bcm2711-rpi-400.dts tries to use the delete-node directive in order to remove the complete node. Unfortunately the usage get broken in commit 1156e3a78bcc ("ARM: dts: bcm283x: Move ACT LED into separate dtsi") and now ACT and PWR LED using the same GPIO and this prevent probing of led-gpios on Raspberry Pi 400: leds-gpio: probe of leds failed with error -16 So fix the delete-node directive. Fixes: 1156e3a78bcc ("ARM: dts: bcm283x: Move ACT LED into separate dtsi") Signed-off-by: Stefan Wahren <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Florian Fainelli <[email protected]>
2023-11-28bcachefs: trace_move_extent_start_fail() now includes errcodeKent Overstreet3-17/+14
Renamed from trace_move_extent_alloc_mem_fail, because there are other reasons we colud fail (disk space allocation failure). Signed-off-by: Kent Overstreet <[email protected]>
2023-11-28bcachefs: Fix split_race livelockKent Overstreet1-1/+5
bch2_btree_update_start() calculates which nodes are going to have to be split/rewritten, so that we know how many nodes to reserve and how deep in the tree we have to take locks. But btree node merges require inserting two keys into the parent node, not just splits. Signed-off-by: Kent Overstreet <[email protected]>
2023-11-28bcachefs: Fix bucket data type for stripe bucketsKent Overstreet1-2/+6
Signed-off-by: Kent Overstreet <[email protected]>
2023-11-28bcachefs: Add missing validation for jset_entry_data_usageKent Overstreet4-31/+53
Validation was completely missing for replicas entries in the journal (not the superblock replicas section) - we can't have replicas entries pointing to invalid devices. Signed-off-by: Kent Overstreet <[email protected]>
2023-11-28bcachefs: Fix zstd compress workspace sizeKent Overstreet2-7/+11
zstd apparently lies about the size of the compression workspace it requires; if we double it compression succeeds. Signed-off-by: Kent Overstreet <[email protected]>
2023-11-28Merge tag 'for-6.7-rc3-tag' of ↵Linus Torvalds9-10/+62
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "A few fixes and message updates: - for simple quotas, handle the case when a snapshot is created and the target qgroup already exists - fix a warning when file descriptor given to send ioctl is not writable - fix off-by-one condition when checking chunk maps - free pages when page array allocation fails during compression read, other cases were handled - fix memory leak on error handling path in ref-verify debugging feature - copy missing struct member 'version' in 64/32bit compat send ioctl - tree-checker verifies inline backref ordering - print messages to syslog on first mount and last unmount - update error messages when reading chunk maps" * tag 'for-6.7-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: send: ensure send_fd is writable btrfs: free the allocated memory if btrfs_alloc_page_array() fails btrfs: fix 64bit compat send ioctl arguments not initializing version member btrfs: make error messages more clear when getting a chunk map btrfs: fix off-by-one when checking chunk map includes logical address btrfs: ref-verify: fix memory leaks in btrfs_ref_tree_mod() btrfs: add dmesg output for first mount and last unmount of a filesystem btrfs: do not abort transaction if there is already an existing qgroup btrfs: tree-checker: add type and sequence check for inline backrefs
2023-11-28block: warn once for each partition in bio_check_ro()Yu Kuai2-3/+12
Commit 1b0a151c10a6 ("blk-core: use pr_warn_ratelimited() in bio_check_ro()") fix message storm by limit the rate, however, there will still be lots of message in the long term. Fix it better by warn once for each partition. Signed-off-by: Yu Kuai <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2023-11-28block: move .bd_inode into 1st cacheline of block_deviceMing Lei1-1/+2
The .bd_inode field of block_device is used in IO fast path of blkdev_write_iter() and blkdev_llseek(), so it is more efficient to keep it into the 1st cacheline. .bd_openers is only touched in open()/close(), and .bd_size_lock is only for updating bdev capacity, which is in slow path too. So swap .bd_inode layout with .bd_openers & .bd_size_lock to move .bd_inode into the 1st cache line. Cc: Yu Kuai <[email protected]> Signed-off-by: Ming Lei <[email protected]> Signed-off-by: Yu Kuai <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2023-11-28io_uring: use fget/fput consistentlyJens Axboe2-23/+24
Normally within a syscall it's fine to use fdget/fdput for grabbing a file from the file table, and it's fine within io_uring as well. We do that via io_uring_enter(2), io_uring_register(2), and then also for cancel which is invoked from the latter. io_uring cannot close its own file descriptors as that is explicitly rejected, and for the cancel side of things, the file itself is just used as a lookup cookie. However, it is more prudent to ensure that full references are always grabbed. For anything threaded, either explicitly in the application itself or through use of the io-wq worker threads, this is what happens anyway. Generalize it and use fget/fput throughout. Also see the below link for more details. Link: https://lore.kernel.org/io-uring/CAG48ez1htVSO3TqmrF8QcX2WFuYTRM-VZ_N10i-VZgbtg=NNqw@mail.gmail.com/ Suggested-by: Jann Horn <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2023-11-28io_uring: free io_buffer_list entries via RCUJens Axboe3-15/+56
mmap_lock nests under uring_lock out of necessity, as we may be doing user copies with uring_lock held. However, for mmap of provided buffer rings, we attempt to grab uring_lock with mmap_lock already held from do_mmap(). This makes lockdep, rightfully, complain: WARNING: possible circular locking dependency detected 6.7.0-rc1-00009-gff3337ebaf94-dirty #4438 Not tainted ------------------------------------------------------ buf-ring.t/442 is trying to acquire lock: ffff00020e1480a8 (&ctx->uring_lock){+.+.}-{3:3}, at: io_uring_validate_mmap_request.isra.0+0x4c/0x140 but task is already holding lock: ffff0000dc226190 (&mm->mmap_lock){++++}-{3:3}, at: vm_mmap_pgoff+0x124/0x264 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&mm->mmap_lock){++++}-{3:3}: __might_fault+0x90/0xbc io_register_pbuf_ring+0x94/0x488 __arm64_sys_io_uring_register+0x8dc/0x1318 invoke_syscall+0x5c/0x17c el0_svc_common.constprop.0+0x108/0x130 do_el0_svc+0x2c/0x38 el0_svc+0x4c/0x94 el0t_64_sync_handler+0x118/0x124 el0t_64_sync+0x168/0x16c -> #0 (&ctx->uring_lock){+.+.}-{3:3}: __lock_acquire+0x19a0/0x2d14 lock_acquire+0x2e0/0x44c __mutex_lock+0x118/0x564 mutex_lock_nested+0x20/0x28 io_uring_validate_mmap_request.isra.0+0x4c/0x140 io_uring_mmu_get_unmapped_area+0x3c/0x98 get_unmapped_area+0xa4/0x158 do_mmap+0xec/0x5b4 vm_mmap_pgoff+0x158/0x264 ksys_mmap_pgoff+0x1d4/0x254 __arm64_sys_mmap+0x80/0x9c invoke_syscall+0x5c/0x17c el0_svc_common.constprop.0+0x108/0x130 do_el0_svc+0x2c/0x38 el0_svc+0x4c/0x94 el0t_64_sync_handler+0x118/0x124 el0t_64_sync+0x168/0x16c From that mmap(2) path, we really just need to ensure that the buffer list doesn't go away from underneath us. For the lower indexed entries, they never go away until the ring is freed and we can always sanely reference those as long as the caller has a file reference. For the higher indexed ones in our xarray, we just need to ensure that the buffer list remains valid while we return the address of it. Free the higher indexed io_buffer_list entries via RCU. With that we can avoid needing ->uring_lock inside mmap(2), and simply hold the RCU read lock around the buffer list lookup and address check. To ensure that the arrayed lookup either returns a valid fully formulated entry via RCU lookup, add an 'is_ready' flag that we access with store and release memory ordering. This isn't needed for the xarray lookups, but doesn't hurt either. Since this isn't a fast path, retain it across both types. Similarly, for the allocated array inside the ctx, ensure we use the proper load/acquire as setup could in theory be running in parallel with mmap. While in there, add a few lockdep checks for documentation purposes. Cc: [email protected] Fixes: c56e022c0a27 ("io_uring: add support for user mapped provided buffer ring") Signed-off-by: Jens Axboe <[email protected]>
2023-11-28io_uring/kbuf: prune deferred locked cache when tearing downJens Axboe1-0/+8
We used to just use our page list for final teardown, which would ensure that we got all the buffers, even the ones that were not on the normal cached list. But while moving to slab for the io_buffers, we know only prune this list, not the deferred locked list that we have. This can cause a leak of memory, if the workload ends up using the intermediate locked list. Fix this by always pruning both lists when tearing down. Fixes: b3a4dbc89d40 ("io_uring/kbuf: Use slab for struct io_buffer objects") Signed-off-by: Jens Axboe <[email protected]>
2023-11-28io_uring/kbuf: recycle freed mapped buffer ring entriesJens Axboe1-11/+66
Right now we stash any potentially mmap'ed provided ring buffer range for freeing at release time, regardless of when they get unregistered. Since we're keeping track of these ranges anyway, keep track of their registration state as well, and use that to recycle ranges when appropriate rather than always allocate new ones. The lookup is a basic scan of entries, checking for the best matching free entry. Fixes: c392cbecd8ec ("io_uring/kbuf: defer release of mapped buffer rings") Signed-off-by: Jens Axboe <[email protected]>
2023-11-28cgroup_freezer: cgroup_freezing: Check if not frozenTim Van Patten1-1/+7
__thaw_task() was recently updated to warn if the task being thawed was part of a freezer cgroup that is still currently freezing: void __thaw_task(struct task_struct *p) { ... if (WARN_ON_ONCE(freezing(p))) goto unlock; This has exposed a bug in cgroup1 freezing where when CGROUP_FROZEN is asserted, the CGROUP_FREEZING bits are not also cleared at the same time. Meaning, when a cgroup is marked FROZEN it continues to be marked FREEZING as well. This causes the WARNING to trigger, because cgroup_freezing() thinks the cgroup is still freezing. There are two ways to fix this: 1. Whenever FROZEN is set, clear FREEZING for the cgroup and all children cgroups. 2. Update cgroup_freezing() to also verify that FROZEN is not set. This patch implements option (2), since it's smaller and more straightforward. Signed-off-by: Tim Van Patten <[email protected]> Tested-by: Mark Hasemeyer <[email protected]> Fixes: f5d39b020809 ("freezer,sched: Rewrite core freezer logic") Cc: [email protected] # v6.1+ Signed-off-by: Tejun Heo <[email protected]>
2023-11-28io_uring/kbuf: defer release of mapped buffer ringsJens Axboe4-5/+46
If a provided buffer ring is setup with IOU_PBUF_RING_MMAP, then the kernel allocates the memory for it and the application is expected to mmap(2) this memory. However, io_uring uses remap_pfn_range() for this operation, so we cannot rely on normal munmap/release on freeing them for us. Stash an io_buf_free entry away for each of these, if any, and provide a helper to free them post ->release(). Cc: [email protected] Fixes: c56e022c0a27 ("io_uring: add support for user mapped provided buffer ring") Reported-by: Jann Horn <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2023-11-28powercap: DTPM: Fix unneeded conversions to micro-WattsLukasz Luba2-13/+4
The power values coming from the Energy Model are already in uW. The PowerCap and DTPM frameworks operate on uW, so all places should just use the values from the EM. Fix the code by removing all of the conversion to uW still present in it. Fixes: ae6ccaa65038 (PM: EM: convert power field to micro-Watts precision and align drivers) Cc: 5.19+ <[email protected]> # v5.19+ Signed-off-by: Lukasz Luba <[email protected]> [ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki <[email protected]>
2023-11-28cpufreq/amd-pstate: Fix the return value of amd_pstate_fast_switch()Gautham R. Shenoy1-1/+3
cpufreq_driver->fast_switch() callback expects a frequency as a return value. amd_pstate_fast_switch() was returning the return value of amd_pstate_update_freq(), which only indicates a success or failure. Fix this by making amd_pstate_fast_switch() return the target_freq when the call to amd_pstate_update_freq() is successful, and return the current frequency from policy->cur when the call to amd_pstate_update_freq() is unsuccessful. Fixes: 4badf2eb1e98 ("cpufreq: amd-pstate: Add ->fast_switch() callback") Acked-by: Huang Rui <[email protected]> Reviewed-by: Wyes Karny <[email protected]> Reviewed-by: Perry Yuan <[email protected]> Cc: 6.4+ <[email protected]> # v6.4+ Signed-off-by: Gautham R. Shenoy <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2023-11-28platform/x86: asus-wmi: disable USB0 hub on ROG Ally before suspendLuke D. Jones2-0/+53
ASUS have worked around an issue in XInput where it doesn't support USB selective suspend, which causes suspend issues in Windows. They worked around this by adjusting the MCU firmware to disable the USB0 hub when the screen is switched off during the Microsoft DSM suspend path in ACPI. The issue we have with this however is one of timing - the call the tells the MCU to this isn't able to complete before suspend is done so we call this in a prepare() and add a small msleep() to ensure it is done. This must be done before the screen is switched off to prevent a variety of possible races. Further to this the MCU powersave option must also be disabled as it can cause a number of issues such as: - unreliable resume connection of N-Key - complete loss of N-Key if the power is plugged in while suspended Disabling the powersave option prevents this. Without this the MCU is unable to initialise itself correctly on resume. Signed-off-by: "Luke D. Jones" <[email protected]> Tested-by: Philip Mueller <[email protected]> Reviewed-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ilpo Järvinen <[email protected]>
2023-11-28powerpc: Don't clobber f0/vs0 during fp|altivec register saveTimothy Pearson2-0/+15
During floating point and vector save to thread data f0/vs0 are clobbered by the FPSCR/VSCR store routine. This has been obvserved to lead to userspace register corruption and application data corruption with io-uring. Fix it by restoring f0/vs0 after FPSCR/VSCR store has completed for all the FP, altivec, VMX register save paths. Tested under QEMU in kvm mode, running on a Talos II workstation with dual POWER9 DD2.2 CPUs. Additional detail (mpe): Typically save_fpu() is called from __giveup_fpu() which saves the FP regs and also *turns off FP* in the tasks MSR, meaning the kernel will reload the FP regs from the thread struct before letting the task use FP again. So in that case save_fpu() is free to clobber f0 because the FP regs no longer hold live values for the task. There is another case though, which is the path via: sys_clone() ... copy_process() dup_task_struct() arch_dup_task_struct() flush_all_to_thread() save_all() That path saves the FP regs but leaves them live. That's meant as an optimisation for a process that's using FP/VSX and then calls fork(), leaving the regs live means the parent process doesn't have to take a fault after the fork to get its FP regs back. The optimisation was added in commit 8792468da5e1 ("powerpc: Add the ability to save FPU without giving it up"). That path does clobber f0, but f0 is volatile across function calls, and typically programs reach copy_process() from userspace via a syscall wrapper function. So in normal usage f0 being clobbered across a syscall doesn't cause visible data corruption. But there is now a new path, because io-uring can call copy_process() via create_io_thread() from the signal handling path. That's OK if the signal is handled as part of syscall return, but it's not OK if the signal is handled due to some other interrupt. That path is: interrupt_return_srr_user() interrupt_exit_user_prepare() interrupt_exit_user_prepare_main() do_notify_resume() get_signal() task_work_run() create_worker_cb() create_io_worker() copy_process() dup_task_struct() arch_dup_task_struct() flush_all_to_thread() save_all() if (tsk->thread.regs->msr & MSR_FP) save_fpu() # f0 is clobbered and potentially live in userspace Note the above discussion applies equally to save_altivec(). Fixes: 8792468da5e1 ("powerpc: Add the ability to save FPU without giving it up") Cc: [email protected] # v4.6+ Closes: https://lore.kernel.org/all/480932026.45576726.1699374859845.JavaMail.zimbra@raptorengineeringinc.com/ Closes: https://lore.kernel.org/linuxppc-dev/480221078.47953493.1700206777956.JavaMail.zimbra@raptorengineeringinc.com/ Tested-by: Timothy Pearson <[email protected]> Tested-by: Jens Axboe <[email protected]> Signed-off-by: Timothy Pearson <[email protected]> [mpe: Reword change log to describe exact path of corruption & other minor tweaks] Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/1921539696.48534988.1700407082933.JavaMail.zimbra@raptorengineeringinc.com
2023-11-28r8169: prevent potential deadlock in rtl8169_closeHeiner Kallweit1-1/+3
ndo_stop() is RTNL-protected by net core, and the worker function takes RTNL as well. Therefore we will deadlock when trying to execute a pending work synchronously. To fix this execute any pending work asynchronously. This will do no harm because netif_running() is false in ndo_stop(), and therefore the work function is effectively a no-op. However we have to ensure that no task is running or pending after rtl_remove_one(), therefore add a call to cancel_work_sync(). Fixes: abe5fc42f9ce ("r8169: use RTNL to protect critical sections") Signed-off-by: Heiner Kallweit <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-11-28r8169: fix deadlock on RTL8125 in jumbo mtu modeHeiner Kallweit1-1/+4
The original change results in a deadlock if jumbo mtu mode is used. Reason is that the phydev lock is held when rtl_reset_work() is called here, and rtl_jumbo_config() calls phy_start_aneg() which also tries to acquire the phydev lock. Fix this by calling rtl_reset_work() asynchronously. Fixes: 621735f59064 ("r8169: fix rare issue with broken rx after link-down on RTL8125") Reported-by: Ian Chen <[email protected]> Tested-by: Ian Chen <[email protected]> Cc: [email protected] Signed-off-by: Heiner Kallweit <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-11-28efi/unaccepted: Fix off-by-one when checking for overlapping rangesMichael Roth1-1/+1
When a task needs to accept memory it will scan the accepting_list to see if any ranges already being processed by other tasks overlap with its range. Due to an off-by-one in the range comparisons, a task might falsely determine that an overlapping range is being accepted, leading to an unnecessary delay before it begins processing the range. Fix the off-by-one in the range comparison to prevent this and slightly improve performance. Fixes: 50e782a86c98 ("efi/unaccepted: Fix soft lockups caused by parallel memory acceptance") Link: https://lore.kernel.org/linux-mm/[email protected]/T/#me2eceb9906fcae5fe958b3fe88e41f920f8335b6 Reviewed-by: Kirill A. Shutemov <[email protected]> Signed-off-by: Michael Roth <[email protected]> Acked-by: Vlastimil Babka <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>
2023-11-28xen/events: fix error code in xen_bind_pirq_msi_to_irq()Dan Carpenter1-1/+3
Return -ENOMEM if xen_irq_init() fails. currently the code returns an uninitialized variable or zero. Fixes: 5dd9ad32d775 ("xen/events: drop xen_allocate_irqs_dynamic()") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Juergen Gross <[email protected]>
2023-11-28x86/xen: fix percpu vcpu_info allocationJuergen Gross2-2/+6
Today the percpu struct vcpu_info is allocated via DEFINE_PER_CPU(), meaning that it could cross a page boundary. In this case registering it with the hypervisor will fail, resulting in a panic(). This can easily be fixed by using DEFINE_PER_CPU_ALIGNED() instead, as struct vcpu_info is guaranteed to have a size of 64 bytes, matching the cache line size of x86 64-bit processors (Xen doesn't support 32-bit processors). Fixes: 5ead97c84fa7 ("xen: Core Xen implementation") Signed-off-by: Juergen Gross <[email protected]> Reviewed-by: Boris Ostrovsky <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Juergen Gross <[email protected]>
2023-11-28neighbour: Fix __randomize_layout crash in struct neighbourGustavo A. R. Silva1-1/+1
Previously, one-element and zero-length arrays were treated as true flexible arrays, even though they are actually "fake" flex arrays. The __randomize_layout would leave them untouched at the end of the struct, similarly to proper C99 flex-array members. However, this approach changed with commit 1ee60356c2dc ("gcc-plugins: randstruct: Only warn about true flexible arrays"). Now, only C99 flexible-array members will remain untouched at the end of the struct, while one-element and zero-length arrays will be subject to randomization. Fix a `__randomize_layout` crash in `struct neighbour` by transforming zero-length array `primary_key` into a proper C99 flexible-array member. Fixes: 1ee60356c2dc ("gcc-plugins: randstruct: Only warn about true flexible arrays") Closes: https://lore.kernel.org/linux-hardening/[email protected]/ Signed-off-by: Gustavo A. R. Silva <[email protected]> Reviewed-by: Kees Cook <[email protected]> Tested-by: Joey Gouly <[email protected]> Link: https://lore.kernel.org/r/ZWJoRsJGnCPdJ3+2@work Signed-off-by: Paolo Abeni <[email protected]>
2023-11-28octeontx2-pf: Restore TC ingress police rules when interface is upSubbaraya Sundeep4-25/+102
TC ingress policer rules depends on interface receive queue contexts since the bandwidth profiles are attached to RQ contexts. When an interface is brought down all the queue contexts are freed. This in turn frees bandwidth profiles in hardware causing ingress police rules non-functional after the interface is brought up. Fix this by applying all the ingress police rules config to hardware in otx2_open. Also allow adding ingress rules only when interface is running since no contexts exist for the interface when it is down. Fixes: 68fbff68dbea ("octeontx2-pf: Add police action for TC flower") Signed-off-by: Subbaraya Sundeep <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-11-28octeontx2-pf: Fix adding mbox work queue entry when num_vfs > 64Geetha sowjanya1-2/+5
When more than 64 VFs are enabled for a PF then mbox communication between VF and PF is not working as mbox work queueing for few VFs are skipped due to wrong calculation of VF numbers. Fixes: d424b6c02415 ("octeontx2-pf: Enable SRIOV and added VF mbox handling") Signed-off-by: Geetha sowjanya <[email protected]> Signed-off-by: Subbaraya Sundeep <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-11-28net: stmmac: xgmac: Disable FPE MMC interruptsFurong Xu1-0/+4
Commit aeb18dd07692 ("net: stmmac: xgmac: Disable MMC interrupts by default") tries to disable MMC interrupts to avoid a storm of unhandled interrupts, but leaves the FPE(Frame Preemption) MMC interrupts enabled, FPE MMC interrupts can cause the same problem. Now we mask FPE TX and RX interrupts to disable all MMC interrupts. Fixes: aeb18dd07692 ("net: stmmac: xgmac: Disable MMC interrupts by default") Reviewed-by: Larysa Zaremba <[email protected]> Signed-off-by: Furong Xu <[email protected]> Reviewed-by: Serge Semin <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-11-28drm/gpuvm: Fix deprecated license identifierThomas Hellström2-2/+2
"GPL-2.0-only" in the license header was incorrectly changed to the now deprecated "GPL-2.0". Fix. Cc: Maxime Ripard <[email protected]> Cc: Danilo Krummrich <[email protected]> Reported-by: David Edelsohn <[email protected]> Closes: https://lore.kernel.org/dri-devel/5lfrhdpkwhpgzipgngojs3tyqfqbesifzu5nf4l5q3nhfdhcf2@25nmiq7tfrew/T/#m5c356d68815711eea30dd94cc6f7ea8cd4344fe3 Fixes: f7749a549b4f ("drm/gpuvm: Dual-licence the drm_gpuvm code GPL-2.0 OR MIT") Signed-off-by: Thomas Hellström <[email protected]> Acked-by: Maxime Ripard <[email protected]> Acked-by: Danilo Krummrich <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-11-28Revert "drm/bridge: panel: Add a device link between drm device and panel ↵Linus Walleij1-17/+0
device" This reverts commit 199cf07ebd2b0d41185ac79b895547d45610b681. This patch creates bugs on devices where the DRM device is the ancestor of the panel devices. Attempts to fix this have failed because it leads to using device core functionality which is questionable. Reported-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/lkml/CACRpkdaGzXD6HbiX7mVUNJAJtMEPG00Pp6+nJ1P0JrfJ-ArMvQ@mail.gmail.com/T/ Signed-off-by: Linus Walleij <[email protected]> Acked-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-11-28Revert "driver core: Export device_is_dependent() to modules"Linus Walleij1-1/+0
This reverts commit 1d5e8f4bf06da86b71cc9169110d1a0e1e7af337. Greg says: "why exactly is this needed? Nothing outside of the driver core should be needing this function, it shouldn't be public at all (I missed that before.) So please, revert it for now, let's figure out why DRM thinks this is needed for it's devices, and yet no other bus/subsystem does." Link: https://lore.kernel.org/dri-devel/2023112739-willing-sighing-6bdd@gregkh/ Signed-off-by: Linus Walleij <[email protected]> Acked-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-11-28Revert "drm/bridge: panel: Check device dependency before managing device link"Linus Walleij1-18/+9
This reverts commit 39d5b6a64ace77d0c11c398d272218df5f939abb. This patch was causing build errors by using an unexported function from the device core, which Greg questions the saneness in exporting. Link: https://lore.kernel.org/lkml/CACRpkdaGzXD6HbiX7mVUNJAJtMEPG00Pp6+nJ1P0JrfJ-ArMvQ@mail.gmail.com/T/ Signed-off-by: Linus Walleij <[email protected]> Acked-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-11-28ARM: dts: rockchip: Fix sdmmc_pwren's pinmux setting for RK3128Alex Bee1-1/+1
RK3128's reference design uses sdmmc_pwren pincontrol as GPIO - see [0]. Let's change it in the SoC DT as well. [0] https://github.com/rockchip-linux/kernel/commit/8c62deaf6025 Fixes: a0201bff6259 ("ARM: dts: rockchip: add rk3128 soc dtsi") Signed-off-by: Alex Bee <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
2023-11-28octeontx2-af: Fix possible buffer overflowElena Salomatkina1-2/+2
A loop in rvu_mbox_handler_nix_bandprof_free() contains a break if (idx == MAX_BANDPROF_PER_PFFUNC), but if idx may reach MAX_BANDPROF_PER_PFFUNC buffer '(*req->prof_idx)[layer]' overflow happens before that check. The patch moves the break to the beginning of the loop. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: e8e095b3b370 ("octeontx2-af: cn10k: Bandwidth profiles config support"). Signed-off-by: Elena Salomatkina <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Subbaraya Sundeep <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-11-28ALSA: hda/realtek: Headset Mic VREF to 100%Kailang Yang1-0/+9
This platform need to set Mic VREF to 100%. Signed-off-by: Kailang Yang <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2023-11-27io_uring: enable io_mem_alloc/free to be used in other partsJens Axboe2-2/+5
In preparation for using these helpers, make them non-static and add them to our internal header. Signed-off-by: Jens Axboe <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.