Age | Commit message (Collapse) | Author | Files | Lines |
|
Both callers of rtw_action_public_decache pass a u8 value for the token
parameter. We can change token from s32 to u8 and remove the code for
token < 0.
Tested-by: Philipp Hortmann <[email protected]> # Edimax N150
Signed-off-by: Martin Kaiser <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The only caller of on_action_public_default does not check the return
value. We can make it a void function.
Tested-by: Philipp Hortmann <[email protected]> # Edimax N150
Signed-off-by: Martin Kaiser <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The only caller of on_action_public_vendor does not check the return
value. We can make it a void function.
Tested-by: Philipp Hortmann <[email protected]> # Edimax N150
Signed-off-by: Martin Kaiser <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Use the struct mgmt to read the action_code. This is much simpler than
parsing the message ourselves.
Add a comment about reading the action code. All members of the action
enum start with an action_code byte. It does not matter which member we
use.
Tested-by: Philipp Hortmann <[email protected]> # Edimax N150
Signed-off-by: Martin Kaiser <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Define a struct ieee80211_mgmt in OnAction_p2p and use it to check the
destination address. This replaces a call to the driver-specific
GetAddr1Ptr function.
Tested-by: Philipp Hortmann <[email protected]> # Edimax N150
Signed-off-by: Martin Kaiser <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
OnAction_p2p has a switch-case statement where only a single case is
handled. Use if instead, this makes the code shorter and easier to read.
Tested-by: Philipp Hortmann <[email protected]> # Edimax N150
Signed-off-by: Martin Kaiser <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The caller of OnAction_p2p has already checked the action category. We can
remove the check in OnAction_p2p.
Tested-by: Philipp Hortmann <[email protected]> # Edimax N150
Signed-off-by: Martin Kaiser <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
OnAction_p2p is called only by OnAction, its return value is not checked.
We can make it a static void function.
Tested-by: Philipp Hortmann <[email protected]> # Edimax N150
Signed-off-by: Martin Kaiser <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
OnAction_back is called only by OnAction, its return value is not checked.
We can make it a static void function.
Tested-by: Philipp Hortmann <[email protected]> # Edimax N150
Signed-off-by: Martin Kaiser <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The on_action_public function is called only by OnAction. This function
also lives in rtw_mlme_ext.c and does not check the return value from
on_action_public.
We can make on_action_public a static void function.
The ret variable is no longer needed if we don't return a value. It can
be removed.
Reported-by: kernel test robot <[email protected]>
Tested-by: Philipp Hortmann <[email protected]> # Edimax N150
Signed-off-by: Martin Kaiser <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The caller of on_action_public has already checked the action category. We
can remove the check in on_action_public.
Tested-by: Philipp Hortmann <[email protected]> # Edimax N150
Signed-off-by: Martin Kaiser <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Define a struct ieee80211_mgmt and use it to read the destination address.
This replaces one call to the driver-specific GetAddr1Ptr function, which
should eventually be removed.
Tested-by: Philipp Hortmann <[email protected]> # Edimax N150
Signed-off-by: Martin Kaiser <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
In r8712_init_drv_sw(), whenever any function call returns error, it is
returned immediately without properly cleaning up the other successfully
executed functions. This can cause memory leak.
Instead of return immediately, free all the allocated buffers first.
Tested-by: Philipp Hortmann <[email protected]>
Signed-off-by: Nam Cao <[email protected]>
Link: https://lore.kernel.org/r/0a3414b12031f6cdcba81a8725e91eb9567ff34f.1666688642.git.namcaov@gmail.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The return value of _r8712_init_xmit_priv() is never checked and the driver
always continue execution as if all is well. This will cause problems
if, for example, buffers cannot be allocated and the driver continue and
use those buffers.
Check for return value of _r8712_init_xmit_priv() and return error (if any)
during probing.
Tested-by: Philipp Hortmann <[email protected]>
Signed-off-by: Nam Cao <[email protected]>
Link: https://lore.kernel.org/r/b550803561acf26af71f2377215c28b94435a644.1666688642.git.namcaov@gmail.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The function _r8712_init_recv_priv() and also r8712_init_recv_priv()
just returns silently if they fail to allocate memory. Change their
return type to int and add necessary checks and handling if they return
-ENOMEM
Tested-by: Philipp Hortmann <[email protected]>
Signed-off-by: Nam Cao <[email protected]>
Link: https://lore.kernel.org/r/506ac35a667e511db568b06b86834fd0ceeba453.1666688642.git.namcaov@gmail.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This reverts commit 5d3da4a20a271e3cf5496a50cbb8118aa019374f.
This commit annotated false positive for kmemleak. The reasoning is that
the buffers are freed when the driver is unloaded. However, there is
actually potential memory leak when probe fails.
Tested-by: Philipp Hortmann <[email protected]>
Signed-off-by: Nam Cao <[email protected]>
Link: https://lore.kernel.org/r/26ce206b2c40c7db48c146aa6105789db9dfcc1a.1666688642.git.namcaov@gmail.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Replace the last get_da call with ieee80211_get_DA and remove the get_da
function.
Tested-by: Philipp Hortmann <[email protected]> # Edimax N150
Signed-off-by: Martin Kaiser <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Replace a call to the driver-specific get_da function with
ieee80211_get_DA from ieee80211.h.
Tested-by: Philipp Hortmann <[email protected]> # Edimax N150
Signed-off-by: Martin Kaiser <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Rewritten a comparison to NULL with a negation operator in
accordance with the Linux kernel coding-style regulations. The fix
was directly recommended by the checkpatch script.
Tested-by: Philipp Hortmann <[email protected]>
Signed-off-by: Aaron Lawrence <[email protected]>
Link: https://lore.kernel.org/r/ca33296630627020694f4b653580f689a8a3d1c7.1666787061.git.t4rmin@zohomail.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Split a multiple assignments statement to individual assignments
on different lines in accordance with the Linux kernel coding-style
regulations. Also repositioned comments on it and the statement
before for increased legibility. The multiple assignments issue
was found by the checkpatch script, with the comments legibility
issue were through direct observation.
Tested-by: Philipp Hortmann <[email protected]>
Signed-off-by: Aaron Lawrence <[email protected]>
Link: https://lore.kernel.org/r/a9ab257d0042afd3b3231eefe4f58c0c3ac7649f.1666787061.git.t4rmin@zohomail.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Added braces around needed arms of statements which needs them
in accordance with the Linux kernel coding-style regulations.
The issues were found with the help of the checkpatch script.
Tested-by: Philipp Hortmann <[email protected]>
Signed-off-by: Aaron Lawrence <[email protected]>
Link: https://lore.kernel.org/r/641d8360c5f86b54efc96d7f8ef70be1371db480.1666787061.git.t4rmin@zohomail.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Aligned multiple lines to be at the same indentation of open
parentheses before it in accordance with the Linux kernel
coding-style regulations. The issues were found by running the
checkpatch script on the file.
Tested-by: Philipp Hortmann <[email protected]>
Signed-off-by: Aaron Lawrence <[email protected]>
Link: https://lore.kernel.org/r/4253b94d6b7d94713afb02fa63d0a98686e77cc1.1666787061.git.t4rmin@zohomail.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Removed multiple blank lines that are not necessary before a closing
brace. The issues were found with the checkpatch script and were
dealt with in accordance with the Linux kernel coding-style guidelines.
Tested-by: Philipp Hortmann <[email protected]>
Signed-off-by: Aaron Lawrence <[email protected]>
Link: https://lore.kernel.org/r/1ba11754f1b1e39b1525a837b8493ba8434d5e3b.1666787061.git.t4rmin@zohomail.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Removed multiple unnecessary blank lines in accordance with the
Linux kernel coding-style regulations. The issues were reported by
the checkpatch script.
Tested-by: Philipp Hortmann <[email protected]>
Signed-off-by: Aaron Lawrence <[email protected]>
Link: https://lore.kernel.org/r/f2103758c23f37b61fcbe14f8ed0da8d6b31f5c6.1666787061.git.t4rmin@zohomail.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Rename variables
* rateIndex to rate_index
* rateBitmap to rate_bitmap
to avoid CamelCase which is not accepted by checkpatch.pl .
Signed-off-by: Yogesh Hegde <[email protected]>
Link: https://lore.kernel.org/r/20221030133204.GA416592@zephyrus
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This patch is intended to remove unnecessary parentheses in the
rtllib_module.c file following the Linux kernel coding-style
regulations. The modification is recommended by the checkpatch script.
Signed-off-by: Aaron Lawrence <[email protected]>
Link: https://lore.kernel.org/r/20221027135627.vzc3woeuhrivozqz@plymouth
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Make function rtw_sta_flush to void in order to
prevent cocci warning as follows:
Unneeded variable: "ret". Return "0" on line 1031
Tested-by: Philipp Hortmann <[email protected]> # Edimax N150
Signed-off-by: Kang Minchul <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Return 0 directly instead of storing it in a variable.
This can prevent cocci warning as follows:
Unneeded variable: "pull". Return "0" on line 298
Tested-by: Philipp Hortmann <[email protected]> # Edimax N150
Signed-off-by: Kang Minchul <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Return _SUCCESS directly instead of storing it in a variable.
This can prevent cocci warning as follows:
Unneeded variable: "ret". Return "_SUCCESS" on line 1516
Tested-by: Philipp Hortmann <[email protected]> # Edimax N150
Signed-off-by: Kang Minchul <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Returning value 0 directly instead of storing it in variable ret.
This commit can prevent cocci warning as follows:
Unneeded variable: "ret". Return "0" on line 3030
Tested-by: Philipp Hortmann <[email protected]> # Edimax N150
Signed-off-by: Kang Minchul <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Replace a ternary operator usage with the min() macro to improve
readability.
Tested-by: Philipp Hortmann <[email protected]> # Edimax N150
Signed-off-by: Michael Straube <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Ternary statements that pick the min of two values can be replaced by
the macro min_t(). This improves readability, since its quicker to
understand min_t(type, x, y) than x < y ? x : y. Issue found by
coccicheck.
Signed-off-by: Emily Peri <[email protected]>
Link: https://lore.kernel.org/r/Y1wh1zYMAbbKSrGB@marshmallow
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
There are some unused macros in wifi.h. Remove them.
Signed-off-by: Michael Straube <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Removal of multiple unnecessary blank lines in accordance with the
Linux kernel coding-style regulations. Said issues ware detected on
this file by the checkpatch script.
Signed-off-by: Aaron Lawrence <[email protected]>
Link: https://lore.kernel.org/r/20221025104402.xvbfobi7sdnwlqs2@plymouth
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Remove/add tabs in block statements in rtl8723bs/core to fix checkpatch
warnings for suspect code indent for conditionals.
Signed-off-by: Emily Peri <[email protected]>
Link: https://lore.kernel.org/r/Y1cH7br3mMcT4Dm5@marshmallow
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
brace
Removed a blank line before a closing brace as it is not necessary
as per the Linux coding-style regulations. The issue was flagged by
the checkpatch script.
Signed-off-by: Aaron Lawrence <[email protected]>
Tested-by: Philipp Hortmann <[email protected]>
Link: https://lore.kernel.org/r/234a3e8d21080ae2a1f75127a5c1a0ed131db924.1666612946.git.t4rmin@zohomail.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Fixed several lines that end with an open parenthesis to not end
with it anymore, as per the Linux kernel coding-style regulations.
The issues were flagged by the checkpatch script.
Signed-off-by: Aaron Lawrence <[email protected]>
Tested-by: Philipp Hortmann <[email protected]>
Link: https://lore.kernel.org/r/a8e67d281b4e9ab1254e0b58294f566994ac7d9d.1666612946.git.t4rmin@zohomail.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Added multiple spaces around operators which needs it as per the
Linux kernel coding-style regulations. The issues were flagged by
the checkpatch script.
Signed-off-by: Aaron Lawrence <[email protected]>
Tested-by: Philipp Hortmann <[email protected]>
Link: https://lore.kernel.org/r/b8bf422436ff4b2d9b530c61ebf814582ab8836a.1666612946.git.t4rmin@zohomail.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Aligned multiple statements to match the open parenthesis on the
line before it as per the Linux kernel coding-style regulations.
The issues were flagged by the checkpatch script.
Signed-off-by: Aaron Lawrence <[email protected]>
Tested-by: Philipp Hortmann <[email protected]>
Link: https://lore.kernel.org/r/b9a984cf481018a8ef61e4a579cb307eaf1bdc56.1666612946.git.t4rmin@zohomail.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Multiple blank lines are condensed into a single blank line as per
the Linux kernel coding-style regulations. The issues were flagged
by the checkpatch script.
Signed-off-by: Aaron Lawrence <[email protected]>
Tested-by: Philipp Hortmann <[email protected]>
Link: https://lore.kernel.org/r/a3e044ff9e5b198af15ebc8b91fd048743881340.1666612946.git.t4rmin@zohomail.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
bCardDisableWOHSM in struct adapter is only written but never read.
It can be removed.
Signed-off-by: Martin Kaiser <[email protected]>
Tested-by: Philipp Hortmann <[email protected]> # Edimax N150
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The only caller of _issue_probereq_p2p sets wait_ack = false. Remove the
wait_ack parameter and the code that would run only if wait_ack == true.
Signed-off-by: Martin Kaiser <[email protected]>
Tested-by: Philipp Hortmann <[email protected]> # Edimax N150
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
NetworkTypeInUse from struct wlan_bssid_ex is not used. Remove
NetworkTypeInUse itself, the code to set it and the enum for its
possible values.
Signed-off-by: Martin Kaiser <[email protected]>
Tested-by: Philipp Hortmann <[email protected]> # Edimax N150
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
pcmd_obj was allocated with kzalloc, its memory is filled with 0s.
There's no need to set rsp and rspsz to NULL or 0 again.
Signed-off-by: Martin Kaiser <[email protected]>
Tested-by: Philipp Hortmann <[email protected]> # Edimax N150
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Use is_multicast_ether_addr to check for a multicast address instead of
reimplementing this check in the driver.
Signed-off-by: Martin Kaiser <[email protected]>
Tested-by: Philipp Hortmann <[email protected]> # Edimax N150
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Remove the go2asoc variable in OnAuthClient and call start_clnt_assoc
directly. This makes the code a tiny bit shorter.
Signed-off-by: Martin Kaiser <[email protected]>
Tested-by: Philipp Hortmann <[email protected]> # Edimax N150
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
If we go into this else branch, go2asoc is 0. We can continue to the end
of the function. The final if condition will be false.
Signed-off-by: Martin Kaiser <[email protected]>
Tested-by: Philipp Hortmann <[email protected]> # Edimax N150
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Remove a return statement at the end of a function.
Signed-off-by: Martin Kaiser <[email protected]>
Tested-by: Philipp Hortmann <[email protected]> # Edimax N150
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Remove an else branch in OnAuthClient that is not needed.
If we go into the else branch, go2asoc is 0. We can simply continue and
the last if condition will be false.
Signed-off-by: Martin Kaiser <[email protected]>
Tested-by: Philipp Hortmann <[email protected]> # Edimax N150
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Remove a label on OnAuthClient that just calls return. We can return
directly instead of jumping to this label.
Signed-off-by: Martin Kaiser <[email protected]>
Tested-by: Philipp Hortmann <[email protected]> # Edimax N150
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|