aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-10-27Revert "ip: fix triggering of 'icmp redirect'"Nicolas Dichtel1-2/+2
This reverts commit eb55dc09b5dd040232d5de32812cc83001a23da6. The patch that introduces this bug is reverted right after this one. Signed-off-by: Nicolas Dichtel <[email protected]> Reviewed-by: Julian Anastasov <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-10-27io_uring: unlock if __io_run_local_work locked insideDylan Yudaken2-6/+15
It is possible for tw to lock the ring, and this was not propogated out to io_run_local_work. This can cause an unlock to be missed. Instead pass a pointer to locked into __io_run_local_work. Fixes: 8ac5d85a89b4 ("io_uring: add local task_work run helper that is entered locked") Signed-off-by: Dylan Yudaken <[email protected]> Link: https://lore.kernel.org/r/[email protected] [axboe: WARN_ON() -> WARN_ON_ONCE() and add a minor comment] Signed-off-by: Jens Axboe <[email protected]>
2022-10-27io_uring: use io_run_local_work_locked helperDylan Yudaken1-2/+1
prefer to use io_run_local_work_locked helper for consistency Signed-off-by: Dylan Yudaken <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2022-10-27genetlink: limit the use of validation workarounds to old opsJakub Kicinski1-0/+2
During review of previous change another thing came up - we should limit the use of validation workarounds to old commands. Don't list the workarounds one by one, as we're rejecting all existing ones. We can deal with the masking in the unlikely event that new flag is added. Link: https://lore.kernel.org/all/[email protected]/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-10-27net: bcmsysport: Indicate MAC is in charge of PHY PMFlorian Fainelli1-0/+3
Avoid the PHY library call unnecessarily into the suspend/resume functions by setting phydev->mac_managed_pm to true. The SYSTEMPORT driver essentially does exactly what mdio_bus_phy_resume() does by calling phy_resume(). Fixes: fba863b81604 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM") Signed-off-by: Florian Fainelli <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-10-27Merge tag 'nvme-6.1-2022-10-27' of git://git.infradead.org/nvme into block-6.1Jens Axboe2-2/+12
Pull NVMe fixes from Christoph: "nvme fixes for Linux 6.1 - make the multipath dma alignment to match the non-multipath one (Keith Busch) - fix a bogus use of sg_init_marker() (Nam Cao) - fix circulr locking in nvme-tcp (Sagi Grimberg)" * tag 'nvme-6.1-2022-10-27' of git://git.infradead.org/nvme: nvme-multipath: set queue dma alignment to 3 nvme-tcp: fix possible circular locking when deleting a controller under memory pressure nvme-tcp: replace sg_init_marker() with sg_init_table()
2022-10-27blk-mq: don't add non-pt request with ->end_io to batchMing Lei1-1/+2
dm-rq implements ->end_io callback for request issued to underlying queue, and it isn't passthrough request. Commit ab3e1d3bbab9 ("block: allow end_io based requests in the completion batch handling") doesn't clear rq->bio and rq->__data_len for request with ->end_io in blk_mq_end_request_batch(), and this way is actually dangerous, but so far it is only for nvme passthrough request. dm-rq needs to clean up remained bios in case of partial completion, and req->bio is required, then use-after-free is triggered, so the underlying clone request can't be completed in blk_mq_end_request_batch. Fix panic by not adding such request into batch list, and the issue can be triggered simply by exposing nvme pci to dm-mpath simply. Fixes: ab3e1d3bbab9 ("block: allow end_io based requests in the completion batch handling") Cc: [email protected] Cc: Mike Snitzer <[email protected]> Reported-by: Changhui Zhong <[email protected]> Signed-off-by: Ming Lei <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2022-10-27rbd: fix possible memory leak in rbd_sysfs_init()Yang Yingliang1-1/+3
If device_register() returns error in rbd_sysfs_init(), name of kobject which is allocated in dev_set_name() called in device_add() is leaked. As comment of device_add() says, it should call put_device() to drop the reference count that was set in device_initialize() when it fails, so the name can be freed in kobject_cleanup(). Fault injection test can trigger this problem: unreferenced object 0xffff88810173aa78 (size 8): comm "modprobe", pid 247, jiffies 4294714278 (age 31.789s) hex dump (first 8 bytes): 72 62 64 00 81 88 ff ff rbd..... backtrace: [<00000000f58fae56>] __kmalloc_node_track_caller+0x44/0x1b0 [<00000000bdd44fe7>] kstrdup+0x3a/0x70 [<00000000f7844d0b>] kstrdup_const+0x63/0x80 [<000000001b0a0eeb>] kvasprintf_const+0x10b/0x190 [<00000000a47bd894>] kobject_set_name_vargs+0x56/0x150 [<00000000d5edbf18>] dev_set_name+0xab/0xe0 [<00000000f5153e80>] device_add+0x106/0x1f20 Fixes: dfc5606dc513 ("rbd: replace the rbd sysfs interface") Signed-off-by: Yang Yingliang <[email protected]> Reviewed-by: Alex Elder <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2022-10-27can: j1939: transport: j1939_session_skb_drop_old(): ↵Yang Yingliang1-1/+3
spin_unlock_irqrestore() before kfree_skb() It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. The skb is unlinked from the queue, so it can be freed after spin_unlock_irqrestore(). Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Yang Yingliang <[email protected]> Acked-by: Oleksij Rempel <[email protected]> Link: https://lore.kernel.org/all/[email protected] Cc: [email protected] [mkl: adjust subject] Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-10-27net: ehea: fix possible memory leak in ehea_register_port()Yang Yingliang1-0/+1
If of_device_register() returns error, the of node and the name allocated in dev_set_name() is leaked, call put_device() to give up the reference that was set in device_initialize(), so that of node is put in logical_port_release() and the name is freed in kobject_cleanup(). Fixes: 1acf2318dd13 ("ehea: dynamic add / remove port") Signed-off-by: Yang Yingliang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-10-27Merge branch 'openvswitch-syzbot-splat-fix-and-introduce-selftest'Paolo Abeni6-1/+586
Aaron Conole says: ==================== openvswitch: syzbot splat fix and introduce selftest Syzbot recently caught a splat when dropping features from openvswitch datapaths that are in-use. The WARN() call is definitely too large a hammer for the situation, so change to pr_warn. Second patch in the series introduces a new selftest suite which can help show that an issue is fixed. This change might be more suited to net-next tree, so it has been separated out as an additional patch and can be either applied to either tree based on preference. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-10-27selftests: add openvswitch selftest suiteAaron Conole5-0/+584
Previous commit resolves a WARN splat that can be difficult to reproduce, but with the ovs-dpctl.py utility, it can be trivial. Introduce a test case which creates a DP, and then downgrades the feature set. This will include a utility 'ovs-dpctl.py' that can be extended to do additional tests and diagnostics. Signed-off-by: Aaron Conole <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2022-10-27openvswitch: switch from WARN to pr_warnAaron Conole1-1/+2
As noted by Paolo Abeni, pr_warn doesn't generate any splat and can still preserve the warning to the user that feature downgrade occurred. We likely cannot introduce other kinds of checks / enforcement here because syzbot can generate different genl versions to the datapath. Reported-by: [email protected] Fixes: 44da5ae5fbea ("openvswitch: Drop user features if old user space attempted to create datapath") Cc: Thomas Graf <[email protected]> Signed-off-by: Aaron Conole <[email protected]> Acked-by: Ilya Maximets <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2022-10-27perf/mem: Rename PERF_MEM_LVLNUM_EXTN_MEM to PERF_MEM_LVLNUM_CXLRavi Bangoria2-2/+2
PERF_MEM_LVLNUM_EXTN_MEM was introduced to cover CXL devices but it's bit ambiguous name and also not generic enough to cover cxl.cache and cxl.io devices. Rename it to PERF_MEM_LVLNUM_CXL to be more specific. Signed-off-by: Ravi Bangoria <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2022-10-27perf/x86/rapl: Add support for Intel Raptor LakeZhang Rui1-0/+3
Raptor Lake RAPL support is the same as previous Sky Lake. Add Raptor Lake model for RAPL. Signed-off-by: Zhang Rui <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Tested-by: Wang Wendy <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2022-10-27perf/x86/rapl: Add support for Intel AlderLake-NZhang Rui1-0/+1
AlderLake-N RAPL support is the same as previous Sky Lake. Add AlderLake-N model for RAPL. Signed-off-by: Zhang Rui <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Tested-by: Wang Wendy <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2022-10-27perf: Fix missing raw data on tracepoint eventsJames Clark1-0/+1
Since commit 838d9bb62d13 ("perf: Use sample_flags for raw_data") raw data is not being output on tracepoints due to the PERF_SAMPLE_RAW field not being set. Fix this by setting it for tracepoint events. This fixes the following test failure: perf test "sched_switch" -vvv 35: Track with sched_switch --- start --- test child forked, pid 1828 ... Using CPUID 0x00000000410fd400 sched_switch: cpu: 2 prev_tid -14687 next_tid 0 sched_switch: cpu: 2 prev_tid -14687 next_tid 0 Missing sched_switch events 4613 events recorded test child finished with -1 ---- end ---- Track with sched_switch: FAILED! Fixes: 838d9bb62d13 ("perf: Use sample_flags for raw_data") Signed-off-by: James Clark <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Acked-by: Namhyung Kim <[email protected]> Tested-by: SeongJae Park <[email protected]> Tested-by: Athira Rajeev <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-10-27Merge patch series "R-Car CAN-FD fixes"Marc Kleine-Budde1-13/+11
Biju Das <[email protected]> says: This patch series fixes the below issues in R-Car CAN-FD driver. 1) Race condition in CAN driver under heavy CAN load condition with both channels enabled results in IRQ storm on global FIFO receive IRQ line. 2) Add channel specific TX interrupts handling for RZ/G2L SoC as it has separate IRQ lines for each TX. changes since v1: https://lore.kernel.org/all/[email protected] * Added check for IRQ active and enabled before handling the IRQ on a particular channel. Link: https://lore.kernel.org/all/[email protected] [mkl: adjust message, add link, take only patches 1 + 2, upstream 3 via can-next] Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-10-27can: rcar_canfd: fix channel specific IRQ handling for RZ/G2LBiju Das1-11/+7
RZ/G2L has separate channel specific IRQs for transmit and error interrupts. But the IRQ handler processes both channels, even if there no interrupt occurred on one of the channels. This patch fixes the issue by passing a channel specific context parameter instead of global one for the IRQ register and the IRQ handler, it just handles the channel which is triggered the interrupt. Fixes: 76e9353a80e9 ("can: rcar_canfd: Add support for RZ/G2L family") Signed-off-by: Biju Das <[email protected]> Link: https://lore.kernel.org/all/[email protected] Cc: [email protected] [mkl: adjust commit message] Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-10-27can: rcar_canfd: rcar_canfd_handle_global_receive(): fix IRQ storm on global ↵Biju Das1-2/+4
FIFO receive We are seeing an IRQ storm on the global receive IRQ line under heavy CAN bus load conditions with both CAN channels enabled. Conditions: The global receive IRQ line is shared between can0 and can1, either of the channels can trigger interrupt while the other channel's IRQ line is disabled (RFIE). When global a receive IRQ interrupt occurs, we mask the interrupt in the IRQ handler. Clearing and unmasking of the interrupt is happening in rx_poll(). There is a race condition where rx_poll() unmasks the interrupt, but the next IRQ handler does not mask the IRQ due to NAPIF_STATE_MISSED flag (e.g.: can0 RX FIFO interrupt is disabled and can1 is triggering RX interrupt, the delay in rx_poll() processing results in setting NAPIF_STATE_MISSED flag) leading to an IRQ storm. This patch fixes the issue by checking IRQ active and enabled before handling the IRQ on a particular channel. Fixes: dd3bd23eb438 ("can: rcar_canfd: Add Renesas R-Car CAN FD driver") Suggested-by: Marc Kleine-Budde <[email protected]> Signed-off-by: Biju Das <[email protected]> Link: https://lore.kernel.org/all/[email protected] Cc: [email protected] [mkl: adjust commit message] Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-10-27fbdev/core: Avoid uninitialized read in aperture_remove_conflicting_pci_device()Michał Mirosław1-4/+1
Return on error directly from the BAR-iterating loop instead of break+return. This is actually a cosmetic fix, since it would be highly unusual to have this called for a PCI device without any memory BARs. Fixes: 9d69ef183815 ("fbdev/core: Remove remove_conflicting_pci_framebuffers()") Signed-off-by: Michał Mirosław <[email protected]> Signed-off-by: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/e75323732bedc46d613d72ecb40f97e3bc75eea8.1666829073.git.mirq-linux@rere.qmqm.pl
2022-10-27Merge tag 'amd-drm-fixes-6.1-2022-10-26-1' of ↵Dave Airlie18-119/+259
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.1-2022-10-26-1: amdgpu: - Stable pstate fix - SMU 13.x updates - SR-IOV fixes - PCI AER fix - GC 11.x fixes - Display fixes - Expose IMU firmware version for debugging - Plane modifier fix - S0i3 fix amdkfd: - Fix possible memory leak - Fix GC 10.x cache info reporting UAPI: - Expose IMU firmware version via existing INFO firmware query Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-10-27can: kvaser_usb: Fix possible completions during init_completionAnssi Hannula2-4/+4
kvaser_usb uses completions to signal when a response event is received for outgoing commands. However, it uses init_completion() to reinitialize the start_comp and stop_comp completions before sending the start/stop commands. In case the device sends the corresponding response just before the actual command is sent, complete() may be called concurrently with init_completion() which is not safe. This might be triggerable even with a properly functioning device by stopping the interface (CMD_STOP_CHIP) just after it goes bus-off (which also causes the driver to send CMD_STOP_CHIP when restart-ms is off), but that was not tested. Fix the issue by using reinit_completion() instead. Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by: Jimmy Assarsson <[email protected]> Signed-off-by: Anssi Hannula <[email protected]> Signed-off-by: Jimmy Assarsson <[email protected]> Link: https://lore.kernel.org/all/[email protected] Cc: [email protected] Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-10-27ALSA: aoa: Fix I2S device accountingTakashi Iwai1-1/+2
i2sbus_add_dev() is supposed to return the number of probed devices, i.e. either 1 or 0. However, i2sbus_add_dev() has one error handling that returns -ENODEV; this will screw up the accumulation number counted in the caller, i2sbus_probe(). Fix the return value to 0 and add the comment for better understanding for readers. Fixes: f3d9478b2ce4 ("[ALSA] snd-aoa: add snd-aoa") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-10-27ALSA: Use del_timer_sync() before freeing timerSteven Rostedt (Google)1-6/+1
The current code for freeing the emux timer is extremely dangerous: CPU0 CPU1 ---- ---- snd_emux_timer_callback() snd_emux_free() spin_lock(&emu->voice_lock) del_timer(&emu->tlist); <-- returns immediately spin_unlock(&emu->voice_lock); [..] kfree(emu); spin_lock(&emu->voice_lock); [BOOM!] Instead just use del_timer_sync() which will wait for the timer to finish before continuing. No need to check if the timer is active or not when doing so. This doesn't fix the race of a possible re-arming of the timer, but at least it won't use the data that has just been freed. [ Fixed unused variable warning by tiwai ] Cc: [email protected] Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Steven Rostedt (Google) <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-10-27ALSA: aoa: i2sbus: fix possible memory leak in i2sbus_add_dev()Yang Yingliang1-0/+4
dev_set_name() in soundbus_add_one() allocates memory for name, it need be freed when of_device_register() fails, call soundbus_dev_put() to give up the reference that hold in device_initialize(), so that it can be freed in kobject_cleanup() when the refcount hit to 0. And other resources are also freed in i2sbus_release_dev(), so it can return 0 directly. Fixes: f3d9478b2ce4 ("[ALSA] snd-aoa: add snd-aoa") Signed-off-by: Yang Yingliang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-10-27Merge tag 'asoc-fix-v6.1-rc2' of ↵Takashi Iwai31-69/+270
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.1 Quite a few fixes here, a lot driver specific, plus some new quirks. There was a bit of a mess with the runtime PM handling due to some confusion in the API there which resulted in a number of commits and reverts but that should all be stable now.
2022-10-27Merge tag 'drm-msm-fixes-2022-10-24' of ↵Dave Airlie17-31/+120
https://gitlab.freedesktop.org/drm/msm into drm-fixes msm-fixes for v6.1 - Fix shrinker deadlock - Fix crash during suspend after unbind - Fix IRQ lifetime issues - Fix potential memory corruption with too many bridges - Fix memory corruption on GPU state capture Signed-off-by: Dave Airlie <[email protected]> From: Rob Clark <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGveadezhqm=Sra7Jq4A3tFAp_eBmKKOoHLnapN03pVoLw@mail.gmail.com
2022-10-26net: ethernet: ave: Fix MAC to be in charge of PHY PMKunihiko Hayashi1-0/+6
The phylib callback is called after MAC driver's own resume callback is called. For AVE driver, after resuming immediately, PHY state machine is in PHY_NOLINK because there is a time lag from link-down to link-up due to autoneg. The result is WARN_ON() dump in mdio_bus_phy_resume(). Since ave_resume() itself calls phy_resume(), AVE driver should manage PHY PM. To indicate that MAC driver manages PHY PM, set phydev->mac_managed_pm to true to avoid the unnecessary phylib call and add missing phy_init_hw() to ave_resume(). Suggested-by: Heiner Kallweit <[email protected]> Fixes: fba863b81604 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM") Signed-off-by: Kunihiko Hayashi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-10-26net: fec: limit register access on i.MX6ULJuergen Borleis1-2/+44
Using 'ethtool -d […]' on an i.MX6UL leads to a kernel crash: Unhandled fault: external abort on non-linefetch (0x1008) at […] due to this SoC has less registers in its FEC implementation compared to other i.MX6 variants. Thus, a run-time decision is required to avoid access to non-existing registers. Fixes: a51d3ab50702 ("net: fec: use a more proper compatible string for i.MX6UL type device") Signed-off-by: Juergen Borleis <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-10-26Merge tag 'linux-can-fixes-for-6.1-20221025' of ↵Jakub Kicinski2-4/+9
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2022-10-25 The 1st patch adds a missing cleanup call in the error path of the probe function in mpc5xxx glue code for the mscan driver. The 2nd patch adds a missing cleanup call in the error path of the probe function of the mcp251x driver. * tag 'linux-can-fixes-for-6.1-20221025' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: mcp251x: mcp251x_can_probe(): add missing unregister_candev() in error path can: mscan: mpc5xxx: mpc5xxx_can_probe(): add missing put_clock() in error path ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-10-26Merge tag 'perf-tools-fixes-for-v6.1-2022-10-26' of ↵Linus Torvalds24-104/+181
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tool fixes from Arnaldo Carvalho de Melo: - Fix some aspects of building with an older (than the one in the kernel sources) libbpf present in a distro, when building with LIBBPF_DYNAMIC=1. - Fix errno setting races with event_fd and the signal handler in 'perf record'. - Fix Power10 hv-24x7 metric events when some events may have a zero count based on system configuration. - Do not fail Intel-PT misc test w/o libpython, just skip it. - Fix incorrect arm64 Hisi hip08 L3 metrics (IF_BP_MISP_BR_RET, IF_BP_MISP_BR_RET, IF_BP_MISP_BR_BL) due to mistakes in the documentation used to generate the JSON files for these metrics. - Fix auxtrace (Intel PT, ARM Coresight) address filter symbol name match for modules, we need to skip the module name. - Sync copies of files with the kernel sources, including ppc syscall tables and assorted headers, some resulting in tools being able to decode new network protocols (IPPROTO_L2TP) and statx masks (STATX_DIOALIGN). - Fix PMU name pai_crypto in the vendor events file (JSON) for s390. - Fix man page build wrt perf-arm-coresight.txt as the build process assumes files starting with 'perf-' are man pages, and this file isn't one. * tag 'perf-tools-fixes-for-v6.1-2022-10-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf vendor events arm64: Fix incorrect Hisi hip08 L3 metrics perf auxtrace: Fix address filter symbol name match for modules tools headers UAPI: Sync linux/perf_event.h with the kernel sources tools headers cpufeatures: Sync with the kernel sources tools headers uapi: Sync linux/stat.h with the kernel sources tools include UAPI: Sync sound/asound.h copy with the kernel sources tools headers uapi: Update linux/in.h copy tools headers: Update the copy of x86's memcpy_64.S used in 'perf bench' tools headers arm64: Sync arm64's cputype.h with the kernel sources perf test: Do not fail Intel-PT misc test w/o libpython perf list: Fix PMU name pai_crypto in perf list on s390 perf record: Fix event fd races perf bpf: Fix build with libbpf 0.7.0 by checking if bpf_program__set_insns() is available perf bpf: Fix build with libbpf 0.7.0 by adding prototype for bpf_load_program() perf vendor events power10: Fix hv-24x7 metric events perf docs: Fix man page build wrt perf-arm-coresight.txt tools headers UAPI: Sync powerpc syscall tables with the kernel sources
2022-10-26Merge tag 'spi-fix-v6.1-rc2' of ↵Linus Torvalds7-7/+14
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A collection of mostly unremarkable fixes for SPI that have built up since the merge window, all driver specific. The change to the qup adding support for GPIO chip selects is fixing a regression due to the removal of legacy GPIO handling, the driver had previously been silently relying on the legacy GPIO support in a slightly broken way which worked well enough on some systems. Fixing it is simply a case of setting a couple of bits of information in the driver description" * tag 'spi-fix-v6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: aspeed: Fix window offset of CE1 spi: qup: support using GPIO as chip select line spi: intel: Fix the offset to get the 64K erase opcode spi: aspeed: Fix typo in mode_bits field for AST2600 platform spi: mpc52xx: Replace NO_IRQ by 0 spi: spi-mem: Fix typo (of -> or) spi: spi-gxp: fix typo in SPDX identifier line spi: tegra210-quad: Fix combined sequence
2022-10-26drm/amdgpu: disallow gfxoff until GC IP blocks complete s2idle resumePrike Liang1-0/+16
In the S2idle suspend/resume phase the gfxoff is keeping functional so some IP blocks will be likely to reinitialize at gfxoff entry and that will result in failing to program GC registers.Therefore, let disallow gfxoff until AMDGPU IPs reinitialized completely. Signed-off-by: Prike Liang <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 5.15.x
2022-10-26Merge tag 'arc-6.1-fixes' of ↵Linus Torvalds25-51/+20
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: - fix for Page Table mem leak - defconfig updates - misc other fixes * tag 'arc-6.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: mm: fix leakage of memory allocated for PTE arc: update config files arc: iounmap() arg is volatile arc: dts: Harmonize EHCI/OHCI DT nodes name ARC: bitops: Change __fls to return unsigned long ARC: Fix comment typo ARC: Fix comment typo
2022-10-26usb: dwc3: gadget: Don't set IMI for no_interruptThinh Nguyen1-2/+2
The gadget driver may have a certain expectation of how the request completion flow should be from to its configuration. Make sure the controller driver respect that. That is, don't set IMI (Interrupt on Missed Isoc) when usb_request->no_interrupt is set. Also, the driver should only set IMI to the last TRB of a chain. Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver") Cc: [email protected] Signed-off-by: Thinh Nguyen <[email protected]> Reviewed-by: Jeff Vanhoof <[email protected]> Tested-by: Jeff Vanhoof <[email protected]> Link: https://lore.kernel.org/r/ced336c84434571340c07994e3667a0ee284fefe.1666735451.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-10-26usb: dwc3: gadget: Stop processing more requests on IMIThinh Nguyen1-0/+4
When servicing a transfer completion event, the dwc3 driver will reclaim TRBs of started requests up to the request associated with the interrupt event. Currently we don't check for interrupt due to missed isoc, and the driver may attempt to reclaim TRBs beyond the associated event. This causes invalid memory access when the hardware still owns the TRB. If there's a missed isoc TRB with IMI (interrupt on missed isoc), make sure to stop servicing further. Note that only the last TRB of chained TRBs has its status updated with missed isoc. Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver") Cc: [email protected] Reported-by: Jeff Vanhoof <[email protected]> Reported-by: Dan Vacura <[email protected]> Signed-off-by: Thinh Nguyen <[email protected]> Reviewed-by: Jeff Vanhoof <[email protected]> Tested-by: Jeff Vanhoof <[email protected]> Link: https://lore.kernel.org/r/b29acbeab531b666095dfdafd8cb5c7654fbb3e1.1666735451.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-10-26perf vendor events arm64: Fix incorrect Hisi hip08 L3 metricsShang XiaoJing1-3/+3
Commit 0cc177cfc95d565e ("perf vendor events arm64: Add Hisi hip08 L3 metrics") add L3 metrics of hip08, but some metrics (IF_BP_MISP_BR_RET, IF_BP_MISP_BR_RET, IF_BP_MISP_BR_BL) have incorrect event number due to the mistakes in document, which caused incorrect result. Fix the incorrect metrics. Before: 65,811,214,308 armv8_pmuv3_0/event=0x1014/ # 18.87 push_branch # -40.19 other_branch 3,564,316,780 BR_MIS_PRED # 0.51 indirect_branch # 21.81 pop_branch After: 6,537,146,245 BR_MIS_PRED # 0.48 indirect_branch # 0.47 pop_branch # 0.00 push_branch # 0.05 other_branch Fixes: 0cc177cfc95d565e ("perf vendor events arm64: Add Hisi hip08 L3 metrics") Reviewed-by: John Garry <[email protected]> Signed-off-by: Shang XiaoJing <[email protected]> Acked-by: James Clark <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Leo Yan <[email protected]> Cc: [email protected] Cc: Mark Rutland <[email protected]> Cc: Mike Leach <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Will Deacon <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-10-26perf auxtrace: Fix address filter symbol name match for modulesAdrian Hunter1-1/+9
For modules, names from kallsyms__parse() contain the module name which meant that module symbols did not match exactly by name. Fix by matching the name string up to the separating tab character. Fixes: 1b36c03e356936d6 ("perf record: Add support for using symbols in address filters") Signed-off-by: Adrian Hunter <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-10-26tools headers UAPI: Sync linux/perf_event.h with the kernel sourcesArnaldo Carvalho de Melo1-8/+19
To pick the changes in: cfef80bad4cf79cd ("perf/uapi: Define PERF_MEM_SNOOPX_PEER in kernel header file") ee3e88dfec23153d ("perf/mem: Introduce PERF_MEM_LVLNUM_{EXTN_MEM|IO}") b4e12b2d70fd9ecc ("perf: Kill __PERF_SAMPLE_CALLCHAIN_EARLY") There is a kernel patch pending that renames PERF_MEM_LVLNUM_EXTN_MEM to PERF_MEM_LVLNUM_CXL, tooling this time is ahead of the kernel :-) This thus partially addresses this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/perf_event.h' differs from latest version at 'include/uapi/linux/perf_event.h' diff -u tools/include/uapi/linux/perf_event.h include/uapi/linux/perf_event.h Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Link: https://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-10-27powerpc/64s/interrupt: Fix clear of PACA_IRQS_HARD_DIS when returning to ↵Nicholas Piggin1-2/+11
soft-masked context Commit a4cb3651a1743 ("powerpc/64s/interrupt: Fix lost interrupts when returning to soft-masked context") fixed the problem of pending irqs being cleared when clearing the HARD_DIS bit, but then it didn't clear the bit at all. This change clears HARD_DIS without affecting other bits in the mask. When an interrupt hits in a soft-masked section that has MSR[EE]=1, it can hard disable and set PACA_IRQS_HARD_DIS, which must be cleared when returning to the EE=1 caller (unless it was set due to a MUST_HARD_MASK interrupt becoming pending). Failure to clear this leaves the returned-to context running with MSR[EE]=1 and PACA_IRQS_HARD_DIS, which confuses irq assertions and could be dangerous for code that might test the flag. This was observed in a hash MMU kernel where a kernel hash fault hits in a local_irqs_disabled region that has EE=1. The hash fault also runs with EE=1, then as it returns, a decrementer hits in the restart section and the irq restart code hard-masks which sets the PACA_IRQ_HARD_DIS flag, which is not clear when the original context is returned to. Reported-by: Sachin Sant <[email protected]> Fixes: a4cb3651a1743 ("powerpc/64s/interrupt: Fix lost interrupts when returning to soft-masked context") Signed-off-by: Nicholas Piggin <[email protected]> Tested-by: Sachin Sant <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-10-26s390/vfio-ap: Fix memory allocation for mdev_types arrayJason J. Herne1-1/+1
The vfio-ap crypto driver fails to allocate memory for an array of pointers used to pass supported mdev types to mdev_register_parent(). Since we only support a single mdev type, the fix is to allocate a single entry in the ap_matrix_dev->mdev_types array. Link: https://lore.kernel.org/r/[email protected] Fixes: da44c340c4fe ("vfio/mdev: simplify mdev_type handling") Cc: [email protected] Cc: Tony Krowiak <[email protected]> Reported-by: Christian Borntraeger <[email protected]> Reviewed-by: Matthew Rosato <[email protected]> Signed-off-by: Jason J. Herne <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2022-10-26s390/cio: fix out-of-bounds access on cio_ignore freePeter Oberparleiter1-6/+2
The channel-subsystem-driver scans for newly available devices whenever device-IDs are removed from the cio_ignore list using a command such as: echo free >/proc/cio_ignore Since an I/O device scan might interfer with running I/Os, commit 172da89ed0ea ("s390/cio: avoid excessive path-verification requests") introduced an optimization to exclude online devices from the scan. The newly added check for online devices incorrectly assumes that an I/O-subchannel's drvdata points to a struct io_subchannel_private. For devices that are bound to a non-default I/O subchannel driver, such as the vfio_ccw driver, this results in an out-of-bounds read access during each scan. Fix this by changing the scan logic to rely on a driver-independent online indication. For this we can use struct subchannel->config.ena, which is the driver's requested subchannel-enabled state. Since I/Os can only be started on enabled subchannels, this matches the intent of the original optimization of not scanning devices where I/O might be running. Fixes: 172da89ed0ea ("s390/cio: avoid excessive path-verification requests") Fixes: 0c3812c347bf ("s390/cio: derive cdev information only for IO-subchannels") Cc: <[email protected]> # v5.15 Reported-by: Alexander Egorenkov <[email protected]> Reviewed-by: Vineeth Vijayan <[email protected]> Signed-off-by: Peter Oberparleiter <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2022-10-26s390/pai: fix raw data collection for PMU pai_extThomas Richter1-0/+1
Commit 838d9bb62d13 ("perf: Use sample_flags for raw_data") changed the way the raw data of an event is collected. Adjust the PMU pai_ext to the new scheme. Fixes: 838d9bb62d13 ("perf: Use sample_flags for raw_data") Signed-off-by: Thomas Richter <[email protected]> Acked-by: Sumanth Korikkar <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2022-10-26s390/boot: add secure boot trailerPeter Oberparleiter1-2/+11
This patch enhances the kernel image adding a trailer as required for secure boot by future firmware versions. Cc: <[email protected]> # 5.2+ Signed-off-by: Peter Oberparleiter <[email protected]> Reviewed-by: Sven Schnelle <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2022-10-26s390/pci: add missing EX_TABLE entries to ↵Heiko Carstens1-4/+4
__pcistg_mio_inuser()/__pcilg_mio_inuser() For some exception types the instruction address points behind the instruction that caused the exception. Take that into account and add the missing exception table entry. Cc: <[email protected]> Fixes: f058599e22d5 ("s390/pci: Fix s390_mmio_read/write with MIO") Reviewed-by: Niklas Schnelle <[email protected]> Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2022-10-26s390/futex: add missing EX_TABLE entry to __futex_atomic_op()Heiko Carstens1-1/+2
For some exception types the instruction address points behind the instruction that caused the exception. Take that into account and add the missing exception table entry. Cc: <[email protected]> Reviewed-by: Vasily Gorbik <[email protected]> Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2022-10-26s390/uaccess: add missing EX_TABLE entries to __clear_user()Heiko Carstens1-3/+3
For some exception types the instruction address points behind the instruction that caused the exception. Take that into account and add the missing exception table entries. Cc: <[email protected]> Reviewed-by: Vasily Gorbik <[email protected]> Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2022-10-26MAINTAINERS: remove outdated linux390 linkHeiko Carstens1-12/+0
Reported-by: Alexandra Winter <[email protected]> Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2022-10-26rhashtable: make test actually randomRolf Eike Beer1-36/+22
The "random rhlist add/delete operations" actually wasn't very random, as all cases tested the same bit. Since the later parts of this loop depend on the first case execute this unconditionally, and then test on different bits for the remaining tests. While at it only request as much random bits as are actually used. Signed-off-by: Rolf Eike Beer <[email protected]> Acked-by: Herbert Xu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.