| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The kvm_hypercall() set for LoongArch is limited to a1-a5. So the
mention of a6 in the comment is undefined that needs to be rectified.
Reviewed-by: Bibo Mao <[email protected]>
Signed-off-by: Wentao Guan <[email protected]>
Signed-off-by: Dandan Zhang <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
1. "KVM_PRIVATE_MEM_SLOTS" is renamed as "KVM_INTERNAL_MEM_SLOTS".
2. "KVM_INTERNAL_MEM_SLOTS" defaults to zero, so it is not necessary to
define it in LoongArch's asm/kvm_host.h.
Link: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=bdd1c37a315bc50ab14066c4852bc8dcf070451e
Link: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=b075450868dbc0950f0942617f222eeb989cad10
Reviewed-by: Bibo Mao <[email protected]>
Signed-off-by: Wentao Guan <[email protected]>
Signed-off-by: Yuli Wang <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
As very well explained in commit 20a004e7b017cce282 ("arm64: mm: Use
READ_ONCE/WRITE_ONCE when accessing page tables"), an architecture whose
page table walker can modify the PTE in parallel must use READ_ONCE()/
WRITE_ONCE() macro to avoid any compiler transformation.
So apply that to LoongArch which is such an architecture, in order to
avoid potential problems.
Similar to commit edf955647269422e ("riscv: Use accessors to page table
entries instead of direct dereference").
Signed-off-by: Huacai Chen <[email protected]>
|
|
efi_shutdown_init() can register a general sys_off handler named
efi_power_off(). Enable this by providing efi_poweroff_required(),
like arm and x86. Since EFI poweroff is also supported on LoongArch,
and the enablement makes the poweroff function usable for hardwares
which lack ACPI S5.
We prefer ACPI poweroff rather than EFI poweroff (like x86), so we only
require EFI poweroff if acpi_gbl_reduced_hardware or acpi_no_s5 is true.
Cc: [email protected]
Acked-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Miao Wang <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
In commit a78a8da51b36 ("drm/ttm: replace busy placement with flags v6"),
__i915_ttm_get_pages was updated to use flags instead of the separate
'busy' placement list. However, the behaviour was subtly changed.
Originally, the function would attempt to use the preferred placement
without eviction, and give an opportunity to restart the operation
before falling back to allowing eviction.
This was unintentionally changed, as the preferred placement was not
given the TTM_PL_FLAG_DESIRED flag, and so eviction could be triggered
in that first pass. This caused thrashing, and a significant performance
regression on DG2 systems with small BAR. For example, Minecraft and
Team Fortress 2 would drop to single-digit framerates.
Restore the original behaviour by marking the initial placement as
desired on that first attempt. Also, rework this to use a separate
struct ttm_palcement, as the individual placements are marked 'const',
so hot-patching the flags is even more dodgy than before.
Thanks to Justin Brewer for bisecting this.
Fixes: a78a8da51b36 ("drm/ttm: replace busy placement with flags v6")
Link: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11255
Signed-off-by: David Gow <[email protected]>
Reviewed-by: Jonathan Cavitt <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 92653f2a572505adaf7f13f695c1907e71a1dc84)
Signed-off-by: Joonas Lahtinen <[email protected]>
|
|
In commit a78a8da51b36 ("drm/ttm: replace busy placement with flags v6"),
the old system of having a separate placement list (for placements
which should be used without eviction) and a 'busy' placement list (for
placements which should be attempted if eviction is required) was
replaced with a new one where placements could be marked 'FALLBACK' (to
be attempted if eviction is required) or 'DESIRED' (to be attempted
first, but not if eviction is required).
i915 had always included the requested placement in the list of
'busy' placements: i.e., the placement could be used either if eviction
is required or not. But when the new system was put in place, the
requested (first) placement was marked 'DESIRED', so would never be used
if eviction became necessary. While a bug in the original commit
prevented this flag from working, when this was fixed in
4a0e7b3c ("drm/i915: fix applying placement flag"), it caused long hangs
on DG2 systems with small BAR.
Don't mark the requested placement DESIRED (or FALLBACK), allowing it to
be used in both situations. This matches the old behaviour, and resolves
the hangs.
Thanks to Justin Brewer for bisecting the issue.
Fixes: a78a8da51b36 ("drm/ttm: replace busy placement with flags v6")
Fixes: 4a0e7b3c3753 ("drm/i915: fix applying placement flag")
Link: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11255
Signed-off-by: David Gow <[email protected]>
Reviewed-by: Jonathan Cavitt <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 54bf0af90844fbf18f5be3272eda69198dfdb622)
Signed-off-by: Joonas Lahtinen <[email protected]>
|
|
The Framework Laptop 13 (Intel Core Ultra) has an ALC285 that ships in a
similar configuration to the ALC295 in previous models. It requires the
same quirk for headset detection.
Signed-off-by: Dustin L. Howett <[email protected]>
Cc: <[email protected]>
Link: https://patch.msgid.link/20240806-alsa-hda-realtek-add-framework-laptop-13-intel-core-ultra-to-quirks-v1-1-42d6ce2dbf14@howett.net
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Add support for MeiG Smart SRM825L which is based on Qualcomm 315 chip.
T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=2dee ProdID=4d22 Rev= 4.14
S: Manufacturer=MEIG
S: Product=LTE-A Module
S: SerialNumber=6f345e48
C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=896mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=88(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
Signed-off-by: ZHANG Yuntian <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The wol variable in ksz_port_set_mac_address() is declared with random
data, but the code in ksz_get_wol call may not be executed so the
WAKE_MAGIC check may be invalid resulting in an error message when
setting a MAC address after starting the DSA driver.
Fixes: 3b454b6390c3 ("net: dsa: microchip: ksz9477: Add Wake on Magic Packet support")
Signed-off-by: Tristram Ha <[email protected]>
Reviewed-by: Oleksij Rempel <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add the missing geni_icc_disable() before return in
geni_i2c_runtime_resume().
Fixes: bf225ed357c6 ("i2c: i2c-qcom-geni: Add interconnect support")
Signed-off-by: Gaosheng Cui <[email protected]>
Reviewed-by: Vladimir Zapolskiy <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
|
|
Sets the `sysroot` field in rust-project.json which is now needed in
newer versions of rust-analyzer instead of the `sysroot_src` field.
Till [1] `rust-analyzer` used to guess the `sysroot` based on the
`sysroot_src` at [2]. Now `sysroot` is a required parameter for a
`rust-project.json` file. It is required because `rust-analyzer`
need it to find the proc-macro server [3].
In the current version of `rust-analyzer` the `sysroot_src` is only used
to include the inbuilt library crates (std, core, alloc, etc) [4]. Since
we already specify the core library to be included in the
`rust-project.json` we don't need to define the `sysroot_src`.
Code editors like VS Code try to use the latest version of rust-analyzer
(which is updated every week) instead of the version of rust-analyzer
that comes with the rustup toolchain (which is updated every six weeks
along with the rust version).
Without this change `rust-analyzer` is breaking for anyone using VS Code.
As they are getting the latest version of `rust-analyzer` with the
changes made in [1].
`rust-analyzer` will also start breaking for other developers as they
update their rust version (assuming that also updates the rust-analyzer
version on their system).
This patch should work with every setup as there is no more guess work
being done by `rust-analyzer`.
[ Lukas, who leads the rust-analyzer team, says:
`sysroot_src` is required now if you want to have the sysroot
source libraries be loaded. I think we used to infer it as
`{sysroot}/lib/rustlib/src/rust/library` before when only the
`sysroot` field was given but that was since changed to make it
possible in having a sysroot without the standard library sources
(that is only have the binaries available). So if you want the
library sources to be loaded by rust-analyzer you will have to set
that field as well now.
- Miguel ]
Link: https://github.com/rust-lang/rust-analyzer/pull/17287 [1]
Link: https://github.com/rust-lang/rust-analyzer/blob/f372a8a1176ff8dd5f45ab2ddd45f3530db0374f/crates/project-model/src/workspace.rs#L367-L374 [2]
Link: https://github.com/rust-lang/rust-analyzer/blob/eeb192b79aeac47b40add66347022af17a74fbaf/crates/project-model/src/sysroot.rs#L180-L192 [3]
Link: https://github.com/search?q=repo%3AVeykril%2Frust-analyzer%20src_root()&type=code [4]
Tested-by: Dirk Behme <[email protected]>
Signed-off-by: Sarthak Singh <[email protected]>
Link: https://rust-for-linux.zulipchat.com/#narrow/stream/291565-Help/topic/How.20to.20rust-analyzer.20correctly.20working
Link: https://lore.kernel.org/r/[email protected]
[ Formatted comment, fixed typo and removed spurious empty line. - Miguel ]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
The count increases only when a node is successfully added to
the linked list.
Cc: [email protected]
Fixes: fa1aa143ac4a ("selinux: extended permissions for ioctls")
Signed-off-by: Zhen Lei <[email protected]>
Acked-by: Stephen Smalley <[email protected]>
Signed-off-by: Paul Moore <[email protected]>
|
|
To pick up changes from:
f05c1ffc2745 ALSA: pcm: reinvent the stream synchronization ID API
This should be used to beautify sound syscall arguments and it addresses
these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/uapi/sound/asound.h include/uapi/sound/asound.h
Please see tools/include/uapi/README for details (it's in the first patch
of this series).
Cc: Jaroslav Kysela <[email protected]>
Cc: Takashi Iwai <[email protected]>
Cc: [email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|
|
To pick up changes from:
608f6976c309 perf/x86/intel: Support new data source for Lunar Lake
This should be used to beautify perf syscall arguments and it addresses
these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/perf_event.h include/uapi/linux/perf_event.h
Please see tools/include/uapi/README for details (it's in the first patch
of this series).
Cc: Peter Zijlstra <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: "Liang, Kan" <[email protected]>
Cc: [email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|
|
And other arch-specific UAPI headers to pick up changes from:
4b23e0c199b2 KVM: Ensure new code that references immediate_exit gets extra scrutiny
85542adb65ec KVM: x86: Add KVM_RUN_X86_GUEST_MODE kvm_run flag
6fef518594bc KVM: x86: Add a capability to configure bus frequency for APIC timer
34ff65901735 x86/sev: Use kernel provided SVSM Calling Areas
5dcc1e76144f Merge tag 'kvm-x86-misc-6.11' of https://github.com/kvm-x86/linux into HEAD
9a0d2f4995dd KVM: PPC: Book3S HV: Add one-reg interface for HASHPKEYR register
e9eb790b2557 KVM: PPC: Book3S HV: Add one-reg interface for HASHKEYR register
1a1e6865f516 KVM: PPC: Book3S HV: Add one-reg interface for DEXCR register
This should be used to beautify KVM syscall arguments and it addresses
these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
diff -u tools/arch/x86/include/uapi/asm/svm.h arch/x86/include/uapi/asm/svm.h
diff -u tools/arch/powerpc/include/uapi/asm/kvm.h arch/powerpc/include/uapi/asm/kvm.h
Please see tools/include/uapi/README for details (it's in the first patch
of this series).
Cc: Paolo Bonzini <[email protected]>
Cc: [email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|
|
To pick up changes from:
0f1bb41bf396 drm/i915: Support replaying GPU hangs with captured context image
This should be used to beautify DRM syscall arguments and it addresses
these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Please see tools/include/uapi/README for details (it's in the first patch
of this series).
Cc: Jani Nikula <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: [email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|
|
Write down the reason why we keep a copy of headers to the README file
instead of adding it to every commit messages.
Suggested-by: Jani Nikula <[email protected]>
Original-by: Arnaldo Carvalho de Melo <[email protected]>
Original-by: Ingo Molnar <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
|
|
linkwatch_event() grabs possibly very contended RTNL mutex.
system_wq is not suitable for such work.
Inspired by many noisy syzbot reports.
3 locks held by kworker/0:7/5266:
#0: ffff888015480948 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3206 [inline]
#0: ffff888015480948 ((wq_completion)events){+.+.}-{0:0}, at: process_scheduled_works+0x90a/0x1830 kernel/workqueue.c:3312
#1: ffffc90003f6fd00 ((linkwatch_work).work){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3207 [inline]
, at: process_scheduled_works+0x945/0x1830 kernel/workqueue.c:3312
#2: ffffffff8fa6f208 (rtnl_mutex){+.+.}-{3:3}, at: linkwatch_event+0xe/0x60 net/core/link_watch.c:276
Reported-by: syzbot <[email protected]>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <[email protected]>
Reviewed-by: Kuniyuki Iwashima <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
User-space is allowed to submit any property in an async flip as
long as the value doesn't change. However we missed one case:
as things stand, the kernel rejects no-op FB_ID changes on
non-primary planes. Fix this by changing the conditional and
skipping drm_atomic_check_prop_changes() only for FB_ID on the
primary plane (instead of skipping for FB_ID on any plane).
Fixes: 0e26cc72c71c ("drm: Refuse to async flip with atomic prop changes")
Signed-off-by: Simon Ser <[email protected]>
Reviewed-by: André Almeida <[email protected]>
Tested-by: Xaver Hugl <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: Christian König <[email protected]>
Cc: Michel Dänzer <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Pull virtio fix from Michael Tsirkin:
"Fix a single, long-standing issue with kick pass-through vdpa"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost-vdpa: switch to use vmf_insert_pfn() in the fault handler
|
|
The Samsung ATNA45DC02 panel is an AMOLED eDP panel, similar to the
existing ATNA45AF01 and ATNA33XC20 panel but with a higher resolution.
Signed-off-by: Rob Clark <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Currently the dma debugging code can end up indirectly calling printk
under the radix_lock. This happens when a radix tree node allocation
fails.
This is a problem because the printk code, when used together with
netconsole, can end up inside the dma debugging code while trying to
transmit a message over netcons.
This creates the possibility of either a circular deadlock on the same
CPU, with that CPU trying to grab the radix_lock twice, or an ABBA
deadlock between different CPUs, where one CPU grabs the console lock
first and then waits for the radix_lock, while the other CPU is holding
the radix_lock and is waiting for the console lock.
The trace captured by lockdep is of the ABBA variant.
-> #2 (&dma_entry_hash[i].lock){-.-.}-{2:2}:
_raw_spin_lock_irqsave+0x5a/0x90
debug_dma_map_page+0x79/0x180
dma_map_page_attrs+0x1d2/0x2f0
bnxt_start_xmit+0x8c6/0x1540
netpoll_start_xmit+0x13f/0x180
netpoll_send_skb+0x20d/0x320
netpoll_send_udp+0x453/0x4a0
write_ext_msg+0x1b9/0x460
console_flush_all+0x2ff/0x5a0
console_unlock+0x55/0x180
vprintk_emit+0x2e3/0x3c0
devkmsg_emit+0x5a/0x80
devkmsg_write+0xfd/0x180
do_iter_readv_writev+0x164/0x1b0
vfs_writev+0xf9/0x2b0
do_writev+0x6d/0x110
do_syscall_64+0x80/0x150
entry_SYSCALL_64_after_hwframe+0x4b/0x53
-> #0 (console_owner){-.-.}-{0:0}:
__lock_acquire+0x15d1/0x31a0
lock_acquire+0xe8/0x290
console_flush_all+0x2ea/0x5a0
console_unlock+0x55/0x180
vprintk_emit+0x2e3/0x3c0
_printk+0x59/0x80
warn_alloc+0x122/0x1b0
__alloc_pages_slowpath+0x1101/0x1120
__alloc_pages+0x1eb/0x2c0
alloc_slab_page+0x5f/0x150
new_slab+0x2dc/0x4e0
___slab_alloc+0xdcb/0x1390
kmem_cache_alloc+0x23d/0x360
radix_tree_node_alloc+0x3c/0xf0
radix_tree_insert+0xf5/0x230
add_dma_entry+0xe9/0x360
dma_map_page_attrs+0x1d2/0x2f0
__bnxt_alloc_rx_frag+0x147/0x180
bnxt_alloc_rx_data+0x79/0x160
bnxt_rx_skb+0x29/0xc0
bnxt_rx_pkt+0xe22/0x1570
__bnxt_poll_work+0x101/0x390
bnxt_poll+0x7e/0x320
__napi_poll+0x29/0x160
net_rx_action+0x1e0/0x3e0
handle_softirqs+0x190/0x510
run_ksoftirqd+0x4e/0x90
smpboot_thread_fn+0x1a8/0x270
kthread+0x102/0x120
ret_from_fork+0x2f/0x40
ret_from_fork_asm+0x11/0x20
This bug is more likely than it seems, because when one CPU has run out
of memory, chances are the other has too.
The good news is, this bug is hidden behind the CONFIG_DMA_API_DEBUG, so
not many users are likely to trigger it.
Signed-off-by: Rik van Riel <[email protected]>
Reported-by: Konstantin Ovsepian <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes:
- Fix ACPI notifier racing with itself (intel-vbtn)
- Initialize local variable to cover a timeout corner case
(intel/ifs)
- WMI docs spelling
New device IDs:
- amd/{pmc,pmf}: AMD 1Ah model 60h series.
- amd/pmf: SPS quirk support for ASUS ROG Ally X"
* tag 'platform-drivers-x86-v6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel/ifs: Initialize union ifs_status to zero
platform/x86: msi-wmi-platform: Fix spelling mistakes
platform/x86/amd/pmf: Add new ACPI ID AMDI0107
platform/x86/amd/pmc: Send OS_HINT command for new AMD platform
platform/x86/amd: pmf: Add quirk for ROG Ally X
platform/x86: intel-vbtn: Protect ACPI notify handler against recursion
|
|
commit edf2d546bfd6 ("riscv: patch: Flush the icache right after
patching to avoid illegal insns") mistakenly removed the global icache
flush in patch_text_nosync() and patch_text_set_nosync() functions, so
reintroduce them.
Fixes: edf2d546bfd6 ("riscv: patch: Flush the icache right after patching to avoid illegal insns")
Reported-by: Samuel Holland <[email protected]>
Closes: https://lore.kernel.org/linux-riscv/[email protected]/
Signed-off-by: Alexandre Ghiti <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
Reviewed-by: Charlie Jenkins <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Merge series from Simon Trimmer <[email protected]>:
This pair of patches extend wm_adsp to add a callback that can be used
to control whether ALSA controls are added and then tweak cs35l56 to use
it to suppress controls made from firmware coefficients.
|
|
Calculating the size of the mapped area as the lesser value
between the requested size and the actual size does not consider
the partial mapping offset. This can cause page fault access.
Fix the calculation of the starting and ending addresses, the
total size is now deduced from the difference between the end and
start addresses.
Additionally, the calculations have been rewritten in a clearer
and more understandable form.
Fixes: c58305af1835 ("drm/i915: Use remap_io_mapping() to prefault all PTE in a single pass")
Reported-by: Jann Horn <[email protected]>
Co-developed-by: Chris Wilson <[email protected]>
Signed-off-by: Chris Wilson <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Matthew Auld <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: <[email protected]> # v4.9+
Reviewed-by: Jann Horn <[email protected]>
Reviewed-by: Jonathan Cavitt <[email protected]>
[Joonas: Add Requires: tag]
Requires: 60a2066c5005 ("drm/i915/gem: Adjust vma offset for framebuffer mmap offset")
Signed-off-by: Joonas Lahtinen <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 97b6784753da06d9d40232328efc5c5367e53417)
Signed-off-by: Joonas Lahtinen <[email protected]>
|
|
When mapping a framebuffer object, the virtual memory area (VMA)
offset ('vm_pgoff') should be adjusted by the start of the
'vma_node' associated with the object. This ensures that the VMA
offset is correctly aligned with the corresponding offset within
the GGTT aperture.
Increment vm_pgoff by the start of the vma_node with the offset=
provided by the user.
Suggested-by: Chris Wilson <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
Reviewed-by: Jonathan Cavitt <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Cc: <[email protected]> # v4.9+
[Joonas: Add Cc: stable]
Signed-off-by: Joonas Lahtinen <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 60a2066c50058086510c91f404eb582029650970)
Signed-off-by: Joonas Lahtinen <[email protected]>
|
|
Correct the McASP nodes - mcasp3 and mcasp4 with the right
DMAs thread IDs as per TISCI documentation [1] for J784s4.
This fixes the related McASPs probe failure due to incorrect
DMA IDs.
Link: http://downloads.ti.com/tisci/esd/latest/5_soc_doc/j784s4/psil_cfg.html#psi-l-source-and-destination-thread-ids/ [1]
Fixes: 5095ec4aa1ea ("arm64: dts: ti: k3-j784s4-main: Add McASP nodes")
Signed-off-by: Parth Pancholi <[email protected]>
Reviewed-by: Jayesh Choudhary <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Nishanth Menon <[email protected]>
|
|
HP EliteDesk 800 G4 (PCI SSID 103c:83e2) is another Kabylake machine
where BIOS misses the HDMI pin initializations. Add the quirk entry.
Cc: <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
The conversion from the old unistd.h file to syscall.tbl dropped the
nfsservctl macro. This one was handled inconsistently across architectures
in the original introduction of the syscall.tbl format, and I went the
other way on this.
The syscall was already gone in linux-3.1 before the current users
of the generic table (other than openrisc) first appeared, so nobody
could actally use it, but putting the number back helps for consistency
since there are build scripts that check the presence of all these
macros.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2301919
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
In recent HP UEFI firmware (likely v2.15 and above, tested on 2.27),
these pins are incorrectly set for HDMI/DP audio. Tested on
HP MP9 G4 Retail System AMS. Tested audio with two monitors connected
via DisplayPort.
Link: https://forum.manjaro.org/t/intel-cannon-lake-pch-cavs-conexant-cx20632-no-sound-at-hdmi-or-displayport/133494
Link: https://bbs.archlinux.org/viewtopic.php?id=270523
Signed-off-by: Steven 'Steve' Kendall <[email protected]>
Cc: <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
We might run into a SIE validity if gisa has been disabled either via using
kernel parameter "kvm.use_gisa=0" or by setting the related sysfs
attribute to N (echo N >/sys/module/kvm/parameters/use_gisa).
The validity is caused by an invalid value in the SIE control block's
gisa designation. That happens because we pass the uninitialized gisa
origin to virt_to_phys() before writing it to the gisa designation.
To fix this we return 0 in kvm_s390_get_gisa_desc() if the origin is 0.
kvm_s390_get_gisa_desc() is used to determine which gisa designation to
set in the SIE control block. A value of 0 in the gisa designation disables
gisa usage.
The issue surfaces in the host kernel with the following kernel message as
soon a new kvm guest start is attemted.
kvm: unhandled validity intercept 0x1011
WARNING: CPU: 0 PID: 781237 at arch/s390/kvm/intercept.c:101 kvm_handle_sie_intercept+0x42e/0x4d0 [kvm]
Modules linked in: vhost_net tap tun xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT xt_tcpudp nft_compat x_tables nf_nat_tftp nf_conntrack_tftp vfio_pci_core irqbypass vhost_vsock vmw_vsock_virtio_transport_common vsock vhost vhost_iotlb kvm nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables sunrpc mlx5_ib ib_uverbs ib_core mlx5_core uvdevice s390_trng eadm_sch vfio_ccw zcrypt_cex4 mdev vfio_iommu_type1 vfio sch_fq_codel drm i2c_core loop drm_panel_orientation_quirks configfs nfnetlink lcs ctcm fsm dm_service_time ghash_s390 prng chacha_s390 libchacha aes_s390 des_s390 libdes sha3_512_s390 sha3_256_s390 sha512_s390 sha256_s390 sha1_s390 sha_common dm_mirror dm_region_hash dm_log zfcp scsi_transport_fc scsi_dh_rdac scsi_dh_emc scsi_dh_alua pkey zcrypt dm_multipath rng_core autofs4 [last unloaded: vfio_pci]
CPU: 0 PID: 781237 Comm: CPU 0/KVM Not tainted 6.10.0-08682-gcad9f11498ea #6
Hardware name: IBM 3931 A01 701 (LPAR)
Krnl PSW : 0704c00180000000 000003d93deb0122 (kvm_handle_sie_intercept+0x432/0x4d0 [kvm])
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
Krnl GPRS: 000003d900000027 000003d900000023 0000000000000028 000002cd00000000
000002d063a00900 00000359c6daf708 00000000000bebb5 0000000000001eff
000002cfd82e9000 000002cfd80bc000 0000000000001011 000003d93deda412
000003ff8962df98 000003d93de77ce0 000003d93deb011e 00000359c6daf960
Krnl Code: 000003d93deb0112: c020fffe7259 larl %r2,000003d93de7e5c4
000003d93deb0118: c0e53fa8beac brasl %r14,000003d9bd3c7e70
#000003d93deb011e: af000000 mc 0,0
>000003d93deb0122: a728ffea lhi %r2,-22
000003d93deb0126: a7f4fe24 brc 15,000003d93deafd6e
000003d93deb012a: 9101f0b0 tm 176(%r15),1
000003d93deb012e: a774fe48 brc 7,000003d93deafdbe
000003d93deb0132: 40a0f0ae sth %r10,174(%r15)
Call Trace:
[<000003d93deb0122>] kvm_handle_sie_intercept+0x432/0x4d0 [kvm]
([<000003d93deb011e>] kvm_handle_sie_intercept+0x42e/0x4d0 [kvm])
[<000003d93deacc10>] vcpu_post_run+0x1d0/0x3b0 [kvm]
[<000003d93deaceda>] __vcpu_run+0xea/0x2d0 [kvm]
[<000003d93dead9da>] kvm_arch_vcpu_ioctl_run+0x16a/0x430 [kvm]
[<000003d93de93ee0>] kvm_vcpu_ioctl+0x190/0x7c0 [kvm]
[<000003d9bd728b4e>] vfs_ioctl+0x2e/0x70
[<000003d9bd72a092>] __s390x_sys_ioctl+0xc2/0xd0
[<000003d9be0e9222>] __do_syscall+0x1f2/0x2e0
[<000003d9be0f9a90>] system_call+0x70/0x98
Last Breaking-Event-Address:
[<000003d9bd3c7f58>] __warn_printk+0xe8/0xf0
Cc: [email protected]
Reported-by: Christian Borntraeger <[email protected]>
Fixes: fe0ef0030463 ("KVM: s390: sort out physical vs virtual pointers usage")
Signed-off-by: Michael Mueller <[email protected]>
Tested-by: Christian Borntraeger <[email protected]>
Reviewed-by: Janosch Frank <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Message-ID: <[email protected]>
Signed-off-by: Janosch Frank <[email protected]>
|
|
I noticed that when we do discrete host router NVM upgrade and it gets
hot-removed from the PCIe side as a result of NVM firmware authentication,
if there is another host connected with enabled paths we hang in tearing
them down. This is due to fact that the Thunderbolt networking driver
also tries to cleanup the paths and ends up blocking in
tb_disconnect_xdomain_paths() waiting for the domain lock.
However, at this point we already cleaned the paths in tb_stop() so
there is really no need for tb_disconnect_xdomain_paths() to do that
anymore. Furthermore it already checks if the XDomain is unplugged and
bails out early so take advantage of that and mark the XDomain as
unplugged when we remove the parent router.
Cc: [email protected]
Signed-off-by: Mika Westerberg <[email protected]>
|
|
syzbot hit a use-after-free[1] which is caused because the bridge doesn't
make sure that all previous garbage has been collected when removing a
port. What happens is:
CPU 1 CPU 2
start gc cycle remove port
acquire gc lock first
wait for lock
call br_multicasg_gc() directly
acquire lock now but free port
the port can be freed
while grp timers still
running
Make sure all previous gc cycles have finished by using flush_work before
freeing the port.
[1]
BUG: KASAN: slab-use-after-free in br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861
Read of size 8 at addr ffff888071d6d000 by task syz.5.1232/9699
CPU: 1 PID: 9699 Comm: syz.5.1232 Not tainted 6.10.0-rc5-syzkaller-00021-g24ca36a562d6 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114
print_address_description mm/kasan/report.c:377 [inline]
print_report+0xc3/0x620 mm/kasan/report.c:488
kasan_report+0xd9/0x110 mm/kasan/report.c:601
br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861
call_timer_fn+0x1a3/0x610 kernel/time/timer.c:1792
expire_timers kernel/time/timer.c:1843 [inline]
__run_timers+0x74b/0xaf0 kernel/time/timer.c:2417
__run_timer_base kernel/time/timer.c:2428 [inline]
__run_timer_base kernel/time/timer.c:2421 [inline]
run_timer_base+0x111/0x190 kernel/time/timer.c:2437
Reported-by: [email protected]
Closes: https://syzkaller.appspot.com/bug?extid=263426984509be19c9a0
Fixes: e12cec65b554 ("net: bridge: mcast: destroy all entries via gc")
Signed-off-by: Nikolay Aleksandrov <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
copy_fd_bitmaps(new, old, count) is expected to copy the first
count/BITS_PER_LONG bits from old->full_fds_bits[] and fill
the rest with zeroes. What it does is copying enough words
(BITS_TO_LONGS(count/BITS_PER_LONG)), then memsets the rest.
That works fine, *if* all bits past the cutoff point are
clear. Otherwise we are risking garbage from the last word
we'd copied.
For most of the callers that is true - expand_fdtable() has
count equal to old->max_fds, so there's no open descriptors
past count, let alone fully occupied words in ->open_fds[],
which is what bits in ->full_fds_bits[] correspond to.
The other caller (dup_fd()) passes sane_fdtable_size(old_fdt, max_fds),
which is the smallest multiple of BITS_PER_LONG that covers all
opened descriptors below max_fds. In the common case (copying on
fork()) max_fds is ~0U, so all opened descriptors will be below
it and we are fine, by the same reasons why the call in expand_fdtable()
is safe.
Unfortunately, there is a case where max_fds is less than that
and where we might, indeed, end up with junk in ->full_fds_bits[] -
close_range(from, to, CLOSE_RANGE_UNSHARE) with
* descriptor table being currently shared
* 'to' being above the current capacity of descriptor table
* 'from' being just under some chunk of opened descriptors.
In that case we end up with observably wrong behaviour - e.g. spawn
a child with CLONE_FILES, get all descriptors in range 0..127 open,
then close_range(64, ~0U, CLOSE_RANGE_UNSHARE) and watch dup(0) ending
up with descriptor #128, despite #64 being observably not open.
The minimally invasive fix would be to deal with that in dup_fd().
If this proves to add measurable overhead, we can go that way, but
let's try to fix copy_fd_bitmaps() first.
* new helper: bitmap_copy_and_expand(to, from, bits_to_copy, size).
* make copy_fd_bitmaps() take the bitmap size in words, rather than
bits; it's 'count' argument is always a multiple of BITS_PER_LONG,
so we are not losing any information, and that way we can use the
same helper for all three bitmaps - compiler will see that count
is a multiple of BITS_PER_LONG for the large ones, so it'll generate
plain memcpy()+memset().
Reproducer added to tools/testing/selftests/core/close_range_test.c
Cc: [email protected]
Signed-off-by: Al Viro <[email protected]>
|
|
Since the kernel currently requires GCC 5.1 as a minimum, remove the
unnecessary GCC version >= 4.7 check.
Signed-off-by: Thorsten Blum <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
When a reference counter is at zero and refcount_sub_and_test() is invoked
to subtract zero, the function accepts this request without any warning and
returns true. This behavior does not seem ideal because the counter being
already at zero indicates a use-after-free. Furthermore, returning true by
refcount_sub_and_test() in this case potentially results in a double-free
done by its caller.
Modify the underlying function __refcount_sub_and_test() to warn about this
case as a use-after-free and have it return false to avoid the potential
double-free.
Signed-off-by: Petr Pavlu <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"A single fix to the conditional in ksft.py script which incorrectly
flags a test suite failed when there are skipped tests in the mix.
The logic is fixed to take skipped tests into account and report the
test as passed"
* tag 'linux_kselftest-fixes-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: ksft: Fix finished() helper exit code on skipped tests
|
|
The previous patch to fix the newfstatat() syscall entry ended up breaking
fstat() instead. Unfortunately these two are not handled the same way, so
I messed this one up the exact opposite way.
Fixes: 343416f0c11c ("syscalls: fix syscall macros for newfstat/newfstatat")
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Fixes the register ID of SPSR_FIQ.
SPSR_FIQ is a 64-bit register and the 64-bit register size mask is
0x0030000000000000ULL.
Fixes: fd3bc912d3d1 ("KVM: Documentation: Document arm64 core registers in detail")
Signed-off-by: Takahiro Itazuri <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Oliver Upton <[email protected]>
|
|
Commit 5e5c50964e2e ("arm64: dts: ti: k3-j722s: Add gpio-ranges
properties") introduced pinmux range definition for gpio-ranges, however
missed a hole within gpio-range for main_pmx0. As a result, automatic
mapping of GPIO to pin control for gpios within the main_pmx0 domain is
broken. Fix this by correcting the gpio-range.
Fixes: 5e5c50964e2e ("arm64: dts: ti: k3-j722s: Add gpio-ranges properties")
Signed-off-by: Jared McArthur <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Nishanth Menon <[email protected]>
|
|
Commit d72d73a44c3c ("arm64: dts: ti: k3-am62p: Add gpio-ranges
properties") introduced pinmux range definition for gpio-ranges, however
missed a hole within gpio-range for main_pmx0. As a result, automatic
mapping of GPIO to pin control for gpios within the main_pmx0 domain is
broken. Fix this by correcting the gpio-range.
Fixes: d72d73a44c3c ("arm64: dts: ti: k3-am62p: Add gpio-ranges properties")
Signed-off-by: Jared McArthur <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Nishanth Menon <[email protected]>
|
|
Commit d72d73a44c3c ("arm64: dts: ti: k3-am62p: Add gpio-ranges
properties") introduced pinmux range definition for gpio-ranges, however
missed introducing the range description for the mcu_gpio node. As a
result, automatic mapping of GPIO to pin control for mcu gpios is
broken. Fix this by introducing the proper ranges.
Fixes: d72d73a44c3c ("arm64: dts: ti: k3-am62p: Add gpio-ranges properties")
Signed-off-by: Jared McArthur <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Nishanth Menon <[email protected]>
|
|
Use the late-read buffer in the CS35L56 SoundWire interface to
read OTP memory.
The OTP memory has a longer access latency than chip registers
and cannot guarantee to return the data value in the SoundWire
control response if the bus clock is >4.8 MHz. The Cirrus
SoundWire peripheral IP exposes the bridge-to-bus read buffer
and status bits. For a read from OTP the bridge status bits are
polled to wait for the OTP data to be loaded into the read buffer
and the data is then read from there.
Signed-off-by: Richard Fitzgerald <[email protected]>
Fixes: e1830f66f6c6 ("ASoC: cs35l56: Add helper functions for amp calibration")
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Recent changes that started checking the codec version broke audio on
the Lenovo ThinkPad X13s:
wsa_macro 3240000.codec: Unsupported Codec version (0)
wsa_macro 3240000.codec: probe with driver wsa_macro failed with error -22
rx_macro 3200000.rxmacro: Unsupported Codec version (0)
rx_macro 3200000.rxmacro: probe with driver rx_macro failed with error -22
Add the missing codec version to the lookup table so that the codec
drivers probe successfully.
Note that I'm just assuming that this is a 2.0 codec based on the fact
that this device uses the older register layout.
Fixes: 378918d59181 ("ASoC: codecs: lpass-macro: add helpers to get codec version")
Fixes: dbacef05898d ("ASoC: codec: lpass-rx-macro: prepare driver to accomdate new codec versions")
Fixes: 727de4fbc546 ("ASoC: codecs: lpass-wsa-macro: Correct support for newer v2.5 version")
Signed-off-by: Johan Hovold <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add the missing clk_disable_unprepare() before return in
geni_i2c_runtime_resume().
Fixes: 14d02fbadb5d ("i2c: qcom-geni: add desc struct to prepare support for I2C Master Hub variant")
Signed-off-by: Gaosheng Cui <[email protected]>
Reviewed-by: Vladimir Zapolskiy <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fix from Vlastimil Babka:
"Since v6.8 we've had a subtle breakage in SLUB with KFENCE enabled,
that can cause a crash. It hasn't been found earlier due to quite
specific conditions necessary (OOM during kmem_cache_alloc_bulk())"
* tag 'slab-fixes-for-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm, slub: do not call do_slab_free for kfence object
|
|
The recent switch to drmm allocation in drm_bridge_connector_init() may
cause double free on bridge_connector in some of the error handling
paths.
Drop the explicit kfree() calls on bridge_connector.
Fixes: c12907be57b1 ("drm/bridge-connector: switch to using drmm allocations")
Signed-off-by: Cristian Ciocaltea <[email protected]>
Signed-off-by: default avatarRobert Foss <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240711-bridge-connector-fix-dbl-free-v1-1-d558b2d0eb93@collabora.com
|
|
The addition of the bases argument to clock_was_set() fixed up all call
sites correctly except for do_adjtimex(). This uses CLOCK_REALTIME
instead of CLOCK_SET_WALL as argument. CLOCK_REALTIME is 0.
As a result the effect of that clock_was_set() notification is incomplete
and might result in timers expiring late because the hrtimer code does
not re-evaluate the affected clock bases.
Use CLOCK_SET_WALL instead of CLOCK_REALTIME to tell the hrtimers code
which clock bases need to be re-evaluated.
Fixes: 17a1b8826b45 ("hrtimer: Add bases argument to clock_was_set()")
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/all/877ccx7igo.ffs@tglx
|
|
Using syzkaller with the recently reintroduced signed integer overflow
sanitizer produces this UBSAN report:
UBSAN: signed-integer-overflow in ../kernel/time/ntp.c:738:18
9223372036854775806 + 4 cannot be represented in type 'long'
Call Trace:
handle_overflow+0x171/0x1b0
__do_adjtimex+0x1236/0x1440
do_adjtimex+0x2be/0x740
The user supplied time_constant value is incremented by four and then
clamped to the operating range.
Before commit eea83d896e31 ("ntp: NTP4 user space bits update") the user
supplied value was sanity checked to be in the operating range. That change
removed the sanity check and relied on clamping after incrementing which
does not work correctly when the user supplied value is in the overflow
zone of the '+ 4' operation.
The operation requires CAP_SYS_TIME and the side effect of the overflow is
NTP getting out of sync.
Similar to the fixups for time_maxerror and time_esterror, clamp the user
space supplied value to the operating range.
[ tglx: Switch to clamping ]
Fixes: eea83d896e31 ("ntp: NTP4 user space bits update")
Signed-off-by: Justin Stitt <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Miroslav Lichvar <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/all/[email protected]
Closes: https://github.com/KSPP/linux/issues/352
|