aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-12-15btrfs: check WRITE_ERR when trying to read an extent bufferJosef Bacik1-0/+8
Filipe reported a hang when we have errors on btrfs. This turned out to be a side-effect of my fix c2e39305299f01 ("btrfs: clear extent buffer uptodate when we fail to write it") which made it so we clear EXTENT_BUFFER_UPTODATE on an eb when we fail to write it out. Below is a paste of Filipe's analysis he got from using drgn to debug the hang """ btree readahead code calls read_extent_buffer_pages(), sets ->io_pages to a value while writeback of all pages has not yet completed: --> writeback for the first 3 pages finishes, we clear EXTENT_BUFFER_UPTODATE from eb on the first page when we get an error. --> at this point eb->io_pages is 1 and we cleared Uptodate bit from the first 3 pages --> read_extent_buffer_pages() does not see EXTENT_BUFFER_UPTODATE() so it continues, it's able to lock the pages since we obviously don't hold the pages locked during writeback --> read_extent_buffer_pages() then computes 'num_reads' as 3, and sets eb->io_pages to 3, since only the first page does not have Uptodate bit set at this point --> writeback for the remaining page completes, we ended decrementing eb->io_pages by 1, resulting in eb->io_pages == 2, and therefore never calling end_extent_buffer_writeback(), so EXTENT_BUFFER_WRITEBACK remains in the eb's flags --> of course, when the read bio completes, it doesn't and shouldn't call end_extent_buffer_writeback() --> we should clear EXTENT_BUFFER_UPTODATE only after all pages of the eb finished writeback? or maybe make the read pages code wait for writeback of all pages of the eb to complete before checking which pages need to be read, touch ->io_pages, submit read bio, etc writeback bit never cleared means we can hang when aborting a transaction, at: btrfs_cleanup_one_transaction() btrfs_destroy_marked_extents() wait_on_extent_buffer_writeback() """ This is a problem because our writes are not synchronized with reads in any way. We clear the UPTODATE flag and then we can easily come in and try to read the EB while we're still waiting on other bio's to complete. We have two options here, we could lock all the pages, and then check to see if eb->io_pages != 0 to know if we've already got an outstanding write on the eb. Or we can simply check to see if we have WRITE_ERR set on this extent buffer. We set this bit _before_ we clear UPTODATE, so if the read gets triggered because we aren't UPTODATE because of a write error we're guaranteed to have WRITE_ERR set, and in this case we can simply return -EIO. This will fix the reported hang. Reported-by: Filipe Manana <[email protected]> Fixes: c2e39305299f01 ("btrfs: clear extent buffer uptodate when we fail to write it") CC: [email protected] # 5.4+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Signed-off-by: David Sterba <[email protected]>
2021-12-15Merge tag 'wireless-drivers-2021-12-15' of ↵David S. Miller8-19/+24
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.16 Second set of fixes for v5.16, hopefully also the last one. I changed my email in MAINTAINERS, one crash fix in iwlwifi and some build problems fixed. iwlwifi * fix crash caused by a warning * fix LED linking problem brcmsmac * rework LED dependencies for being consistent with other drivers mt76 * mt7921: fix build regression ==================== Signed-off-by: David S. Miller <[email protected]>
2021-12-15Merge branch '100GbE' of ↵David S. Miller2-8/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-12-14 This series contains updates to ice driver only. Karol corrects division that was causing incorrect calculations and adds a check to ensure stale timestamps are not being used. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-12-14bpf, selftests: Update test case for atomic cmpxchg on r0 with pointerDaniel Borkmann1-2/+65
Fix up unprivileged test case results for 'Dest pointer in r0' verifier tests given they now need to reject R0 containing a pointer value, and add a couple of new related ones with 32bit cmpxchg as well. root@foo:~/bpf/tools/testing/selftests/bpf# ./test_verifier #0/u invalid and of negative number OK #0/p invalid and of negative number OK [...] #1268/p XDP pkt read, pkt_meta' <= pkt_data, bad access 1 OK #1269/p XDP pkt read, pkt_meta' <= pkt_data, bad access 2 OK #1270/p XDP pkt read, pkt_data <= pkt_meta', good access OK #1271/p XDP pkt read, pkt_data <= pkt_meta', bad access 1 OK #1272/p XDP pkt read, pkt_data <= pkt_meta', bad access 2 OK Summary: 1900 PASSED, 0 SKIPPED, 0 FAILED Acked-by: Brendan Jackman <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2021-12-14bpf: Fix kernel address leakage in atomic cmpxchg's r0 aux regDaniel Borkmann1-1/+8
The implementation of BPF_CMPXCHG on a high level has the following parameters: .-[old-val] .-[new-val] BPF_R0 = cmpxchg{32,64}(DST_REG + insn->off, BPF_R0, SRC_REG) `-[mem-loc] `-[old-val] Given a BPF insn can only have two registers (dst, src), the R0 is fixed and used as an auxilliary register for input (old value) as well as output (returning old value from memory location). While the verifier performs a number of safety checks, it misses to reject unprivileged programs where R0 contains a pointer as old value. Through brute-forcing it takes about ~16sec on my machine to leak a kernel pointer with BPF_CMPXCHG. The PoC is basically probing for kernel addresses by storing the guessed address into the map slot as a scalar, and using the map value pointer as R0 while SRC_REG has a canary value to detect a matching address. Fix it by checking R0 for pointers, and reject if that's the case for unprivileged programs. Fixes: 5ffa25502b5a ("bpf: Add instructions for atomic_[cmp]xchg") Reported-by: Ryota Shiga (Flatt Security) Acked-by: Brendan Jackman <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2021-12-14bpf, selftests: Add test case for atomic fetch on spilled pointerDaniel Borkmann2-0/+117
Test whether unprivileged would be able to leak the spilled pointer either by exporting the returned value from the atomic{32,64} operation or by reading and exporting the value from the stack after the atomic operation took place. Note that for unprivileged, the below atomic cmpxchg test case named "Dest pointer in r0 - succeed" is failing. The reason is that in the dst memory location (r10 -8) there is the spilled register r10: 0: R1=ctx(id=0,off=0,imm=0) R10=fp0 0: (bf) r0 = r10 1: R0_w=fp0 R1=ctx(id=0,off=0,imm=0) R10=fp0 1: (7b) *(u64 *)(r10 -8) = r0 2: R0_w=fp0 R1=ctx(id=0,off=0,imm=0) R10=fp0 fp-8_w=fp 2: (b7) r1 = 0 3: R0_w=fp0 R1_w=invP0 R10=fp0 fp-8_w=fp 3: (db) r0 = atomic64_cmpxchg((u64 *)(r10 -8), r0, r1) 4: R0_w=fp0 R1_w=invP0 R10=fp0 fp-8_w=mmmmmmmm 4: (79) r1 = *(u64 *)(r0 -8) 5: R0_w=fp0 R1_w=invP(id=0) R10=fp0 fp-8_w=mmmmmmmm 5: (b7) r0 = 0 6: R0_w=invP0 R1_w=invP(id=0) R10=fp0 fp-8_w=mmmmmmmm 6: (95) exit However, allowing this case for unprivileged is a bit useless given an update with a new pointer will fail anyway: 0: R1=ctx(id=0,off=0,imm=0) R10=fp0 0: (bf) r0 = r10 1: R0_w=fp0 R1=ctx(id=0,off=0,imm=0) R10=fp0 1: (7b) *(u64 *)(r10 -8) = r0 2: R0_w=fp0 R1=ctx(id=0,off=0,imm=0) R10=fp0 fp-8_w=fp 2: (db) r0 = atomic64_cmpxchg((u64 *)(r10 -8), r0, r10) R10 leaks addr into mem Acked-by: Brendan Jackman <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2021-12-14bpf: Fix kernel address leakage in atomic fetchDaniel Borkmann1-3/+9
The change in commit 37086bfdc737 ("bpf: Propagate stack bounds to registers in atomics w/ BPF_FETCH") around check_mem_access() handling is buggy since this would allow for unprivileged users to leak kernel pointers. For example, an atomic fetch/and with -1 on a stack destination which holds a spilled pointer will migrate the spilled register type into a scalar, which can then be exported out of the program (since scalar != pointer) by dumping it into a map value. The original implementation of XADD was preventing this situation by using a double call to check_mem_access() one with BPF_READ and a subsequent one with BPF_WRITE, in both cases passing -1 as a placeholder value instead of register as per XADD semantics since it didn't contain a value fetch. The BPF_READ also included a check in check_stack_read_fixed_off() which rejects the program if the stack slot is of __is_pointer_value() if dst_regno < 0. The latter is to distinguish whether we're dealing with a regular stack spill/ fill or some arithmetical operation which is disallowed on non-scalars, see also 6e7e63cbb023 ("bpf: Forbid XADD on spilled pointers for unprivileged users") for more context on check_mem_access() and its handling of placeholder value -1. One minimally intrusive option to fix the leak is for the BPF_FETCH case to initially check the BPF_READ case via check_mem_access() with -1 as register, followed by the actual load case with non-negative load_reg to propagate stack bounds to registers. Fixes: 37086bfdc737 ("bpf: Propagate stack bounds to registers in atomics w/ BPF_FETCH") Reported-by: <[email protected]> Acked-by: Brendan Jackman <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2021-12-14bcache: fix NULL pointer reference in cached_dev_detach_finishLin Feng1-1/+2
Commit 0259d4498ba4 ("bcache: move calc_cached_dev_sectors to proper place on backing device detach") tries to fix calc_cached_dev_sectors when bcache device detaches, but now we have: cached_dev_detach_finish ... bcache_device_detach(&dc->disk); ... closure_put(&d->c->caching); d->c = NULL; [*explicitly set dc->disk.c to NULL*] list_move(&dc->list, &uncached_devices); calc_cached_dev_sectors(dc->disk.c); [*passing a NULL pointer*] ... Upper codeflows shows how bug happens, this patch fix the problem by caching dc->disk.c beforehand, and cache_set won't be freed under us because c->caching closure at least holds a reference count and closure callback __cache_set_unregister only being called by bch_cache_set_stop which using closure_queue(&c->caching), that means c->caching closure callback for destroying cache_set won't be trigger by previous closure_put(&d->c->caching). So at this stage(while cached_dev_detach_finish is calling) it's safe to access cache_set dc->disk.c. Fixes: 0259d4498ba4 ("bcache: move calc_cached_dev_sectors to proper place on backing device detach") Signed-off-by: Lin Feng <[email protected]> Signed-off-by: Coly Li <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2021-12-14block: reduce kblockd_mod_delayed_work_on() CPU consumptionJens Axboe1-0/+2
Dexuan reports that he's seeing spikes of very heavy CPU utilization when running 24 disks and using the 'none' scheduler. This happens off the sched restart path, because SCSI requires the queue to be restarted async, and hence we're hammering on mod_delayed_work_on() to ensure that the work item gets run appropriately. Avoid hammering on the timer and just use queue_work_on() if no delay has been specified. Reported-and-tested-by: Dexuan Cui <[email protected]> Link: https://lore.kernel.org/linux-block/BYAPR21MB1270C598ED214C0490F47400BF719@BYAPR21MB1270.namprd21.prod.outlook.com/ Reviewed-by: Ming Lei <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2021-12-14Merge branch 'mptcp-fixes-for-ulp-a-deadlock-and-netlink-docs'Jakub Kicinski3-11/+14
Mat Martineau says: ==================== mptcp: Fixes for ULP, a deadlock, and netlink docs Two of the MPTCP fixes in this set are related to the TCP_ULP socket option with MPTCP sockets operating in "fallback" mode (the connection has reverted to regular TCP). The other issues are an observed deadlock and missing parameter documentation in the MPTCP netlink API. Patch 1 marks TCP_ULP as unsupported earlier in MPTCP setsockopt code, so the fallback code path in the MPTCP layer does not pass the TCP_ULP option down to the subflow TCP socket. Patch 2 makes sure a TCP fallback socket returned to userspace by accept()ing on a MPTCP listening socket does not allow use of the "mptcp" TCP_ULP type. That ULP is intended only for use by in-kernel MPTCP subflows. Patch 3 fixes the possible deadlock when sending data and there are socket option changes to sync to the subflows. Patch 4 makes sure all MPTCP netlink event parameters are documented in the MPTCP uapi header. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-12-14mptcp: add missing documented NL paramsMatthieu Baerts1-8/+10
'loc_id' and 'rem_id' are set in all events linked to subflows but those were missing in the events description in the comments. Fixes: b911c97c7dc7 ("mptcp: add netlink event support") Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-12-14mptcp: fix deadlock in __mptcp_push_pending()Maxim Galaganov1-1/+1
__mptcp_push_pending() may call mptcp_flush_join_list() with subflow socket lock held. If such call hits mptcp_sockopt_sync_all() then subsequently __mptcp_sockopt_sync() could try to lock the subflow socket for itself, causing a deadlock. sysrq: Show Blocked State task:ss-server state:D stack: 0 pid: 938 ppid: 1 flags:0x00000000 Call Trace: <TASK> __schedule+0x2d6/0x10c0 ? __mod_memcg_state+0x4d/0x70 ? csum_partial+0xd/0x20 ? _raw_spin_lock_irqsave+0x26/0x50 schedule+0x4e/0xc0 __lock_sock+0x69/0x90 ? do_wait_intr_irq+0xa0/0xa0 __lock_sock_fast+0x35/0x50 mptcp_sockopt_sync_all+0x38/0xc0 __mptcp_push_pending+0x105/0x200 mptcp_sendmsg+0x466/0x490 sock_sendmsg+0x57/0x60 __sys_sendto+0xf0/0x160 ? do_wait_intr_irq+0xa0/0xa0 ? fpregs_restore_userregs+0x12/0xd0 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f9ba546c2d0 RSP: 002b:00007ffdc3b762d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f9ba56c8060 RCX: 00007f9ba546c2d0 RDX: 000000000000077a RSI: 0000000000e5e180 RDI: 0000000000000234 RBP: 0000000000cc57f0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f9ba56c8060 R13: 0000000000b6ba60 R14: 0000000000cc7840 R15: 41d8685b1d7901b8 </TASK> Fix the issue by using __mptcp_flush_join_list() instead of plain mptcp_flush_join_list() inside __mptcp_push_pending(), as suggested by Florian. The sockopt sync will be deferred to the workqueue. Fixes: 1b3e7ede1365 ("mptcp: setsockopt: handle SO_KEEPALIVE and SO_PRIORITY") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/244 Suggested-by: Florian Westphal <[email protected]> Reviewed-by: Florian Westphal <[email protected]> Signed-off-by: Maxim Galaganov <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-12-14mptcp: clear 'kern' flag from fallback socketsFlorian Westphal1-1/+3
The mptcp ULP extension relies on sk->sk_sock_kern being set correctly: It prevents setsockopt(fd, IPPROTO_TCP, TCP_ULP, "mptcp", 6); from working for plain tcp sockets (any userspace-exposed socket). But in case of fallback, accept() can return a plain tcp sk. In such case, sk is still tagged as 'kernel' and setsockopt will work. This will crash the kernel, The subflow extension has a NULL ctx->conn mptcp socket: BUG: KASAN: null-ptr-deref in subflow_data_ready+0x181/0x2b0 Call Trace: tcp_data_ready+0xf8/0x370 [..] Fixes: cf7da0d66cc1 ("mptcp: Create SUBFLOW socket for incoming connections") Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-12-14mptcp: remove tcp ulp setsockopt supportFlorian Westphal1-1/+0
TCP_ULP setsockopt cannot be used for mptcp because its already used internally to plumb subflow (tcp) sockets to the mptcp layer. syzbot managed to trigger a crash for mptcp connections that are in fallback mode: KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027] CPU: 1 PID: 1083 Comm: syz-executor.3 Not tainted 5.16.0-rc2-syzkaller #0 RIP: 0010:tls_build_proto net/tls/tls_main.c:776 [inline] [..] __tcp_set_ulp net/ipv4/tcp_ulp.c:139 [inline] tcp_set_ulp+0x428/0x4c0 net/ipv4/tcp_ulp.c:160 do_tcp_setsockopt+0x455/0x37c0 net/ipv4/tcp.c:3391 mptcp_setsockopt+0x1b47/0x2400 net/mptcp/sockopt.c:638 Remove support for TCP_ULP setsockopt. Fixes: d9e4c1291810 ("mptcp: only admit explicitly supported sockopt") Reported-by: [email protected] Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-12-14drm/amd/pm: fix a potential gpu_metrics_table memory leakLang Yu1-0/+3
Memory is allocated for gpu_metrics_table in renoir_init_smc_tables(), but not freed in int smu_v12_0_fini_smc_tables(). Free it! Fixes: 95868b85764a ("drm/amd/powerplay: add Renoir support for gpu metrics export") Signed-off-by: Lang Yu <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-14drm/amdgpu: correct the wrong cached state for GMC on PICASSOEvan Quan3-5/+18
Pair the operations did in GMC ->hw_init and ->hw_fini. That can help to maintain correct cached state for GMC and avoid unintention gate operation dropping due to wrong cached state. BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1828 Signed-off-by: Evan Quan <[email protected]> Acked-by: Guchun Chen <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-14drm/amd/display: Reset DMCUB before HW initNicholas Kazlauskas1-0/+5
[Why] If the firmware wasn't reset by PSP or HW and is currently running then the firmware will hang or perform underfined behavior when we modify its firmware state underneath it. [How] Reset DMCUB before setting up cache windows and performing HW init. Reviewed-by: Aurabindo Jayamohanan Pillai <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-14drm/amd/display: Set exit_optimized_pwr_state for DCN31Nicholas Kazlauskas1-0/+1
[Why] SMU now respects the PHY refclk disable request from driver. This causes a hang during hotplug when PHY refclk was disabled because it's not being re-enabled and the transmitter control starts on dc_link_detect. [How] We normally would re-enable the clk with exit_optimized_pwr_state but this is only set on DCN21 and DCN301. Set it for dcn31 as well. This fixes DMCUB timeouts in the PHY. Fixes: 64b1d0e8d500 ("drm/amd/display: Add DCN3.1 HWSEQ") Reviewed-by: Eric Yang <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-14drm/amd/pm: fix reading SMU FW version from amdgpu_firmware_info on YCMario Limonciello1-0/+3
This value does not get cached into adev->pm.fw_version during startup for smu13 like it does for other SMU like smu12. Signed-off-by: Mario Limonciello <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2021-12-14drm/amdgpu: don't override default ECO_BITs settingHawking Zhang8-9/+0
Leave this bit as hardware default setting Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2021-12-14drm/amdgpu: correct register access for RLC_JUMP_TABLE_RESTORELe Ma1-2/+2
should count on GC IP base address Signed-off-by: Le Ma <[email protected]> Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2021-12-14signal: Skip the altstack update when not neededChang S. Bae1-0/+9
== Background == Support for large, "dynamic" fpstates was recently merged. This included code to ensure that sigaltstacks are sufficiently sized for these large states. A new lock was added to remove races between enabling large features and setting up sigaltstacks. == Problem == The new lock (sigaltstack_lock()) is acquired in the sigreturn path before restoring the old sigaltstack. Unfortunately, contention on the new lock causes a measurable signal handling performance regression [1]. However, the common case is that no *changes* are made to the sigaltstack state at sigreturn. == Solution == do_sigaltstack() acquires sigaltstack_lock() and is used for both sys_sigaltstack() and restoring the sigaltstack in sys_sigreturn(). Check for changes to the sigaltstack before taking the lock. If no changes were made, return before acquiring the lock. This removes lock contention from the common-case sigreturn path. [1] https://lore.kernel.org/lkml/20211207012128.GA16074@xsang-OptiPlex-9020/ Fixes: 3aac3ebea08f ("x86/signal: Implement sigaltstack size validation") Reported-by: kernel test robot <[email protected]> Signed-off-by: Chang S. Bae <[email protected]> Signed-off-by: Dave Hansen <[email protected]> Reviewed-by: Thomas Gleixner <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2021-12-14ice: Don't put stale timestamps in the skbKarol Kolacinski2-7/+10
The driver has to check if it does not accidentally put the timestamp in the SKB before previous timestamp gets overwritten. Timestamp values in the PHY are read only and do not get cleared except at hardware reset or when a new timestamp value is captured. The cached_tstamp field is used to detect the case where a new timestamp has not yet been captured, ensuring that we avoid sending stale timestamp data to the stack. Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices") Signed-off-by: Karol Kolacinski <[email protected]> Tested-by: Gurucharan G <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-12-14ice: Use div64_u64 instead of div_u64 in adjfineKarol Kolacinski1-1/+1
Change the division in ice_ptp_adjfine from div_u64 to div64_u64. div_u64 is used when the divisor is 32 bit but in this case incval is 64 bit and it caused incorrect calculations and incval adjustments. Fixes: 06c16d89d2cb ("ice: register 1588 PTP clock device object for E810 devices") Signed-off-by: Karol Kolacinski <[email protected]> Tested-by: Gurucharan G <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-12-14btrfs: fix missing last dir item offset update when logging directoryFilipe Manana1-0/+1
When logging a directory, once we finish processing a leaf that is full of dir items, if we find the next leaf was not modified in the current transaction, we grab the first key of that next leaf and log it as to mark the end of a key range boundary. However we did not update the value of ctx->last_dir_item_offset, which tracks the offset of the last logged key. This can result in subsequent logging of the same directory in the current transaction to not realize that key was already logged, and then add it to the middle of a batch that starts with a lower key, resulting later in a leaf with one key that is duplicated and at non-consecutive slots. When that happens we get an error later when writing out the leaf, reporting that there is a pair of keys in wrong order. The report is something like the following: Dec 13 21:44:50 kernel: BTRFS critical (device dm-0): corrupt leaf: root=18446744073709551610 block=118444032 slot=21, bad key order, prev (704687 84 4146773349) current (704687 84 1063561078) Dec 13 21:44:50 kernel: BTRFS info (device dm-0): leaf 118444032 gen 91449 total ptrs 39 free space 546 owner 18446744073709551610 Dec 13 21:44:50 kernel: item 0 key (704687 1 0) itemoff 3835 itemsize 160 Dec 13 21:44:50 kernel: inode generation 35532 size 1026 mode 40755 Dec 13 21:44:50 kernel: item 1 key (704687 12 704685) itemoff 3822 itemsize 13 Dec 13 21:44:50 kernel: item 2 key (704687 24 3817753667) itemoff 3736 itemsize 86 Dec 13 21:44:50 kernel: item 3 key (704687 60 0) itemoff 3728 itemsize 8 Dec 13 21:44:50 kernel: item 4 key (704687 72 0) itemoff 3720 itemsize 8 Dec 13 21:44:50 kernel: item 5 key (704687 84 140445108) itemoff 3666 itemsize 54 Dec 13 21:44:50 kernel: dir oid 704793 type 1 Dec 13 21:44:50 kernel: item 6 key (704687 84 298800632) itemoff 3599 itemsize 67 Dec 13 21:44:50 kernel: dir oid 707849 type 2 Dec 13 21:44:50 kernel: item 7 key (704687 84 476147658) itemoff 3532 itemsize 67 Dec 13 21:44:50 kernel: dir oid 707901 type 2 Dec 13 21:44:50 kernel: item 8 key (704687 84 633818382) itemoff 3471 itemsize 61 Dec 13 21:44:50 kernel: dir oid 704694 type 2 Dec 13 21:44:50 kernel: item 9 key (704687 84 654256665) itemoff 3403 itemsize 68 Dec 13 21:44:50 kernel: dir oid 707841 type 1 Dec 13 21:44:50 kernel: item 10 key (704687 84 995843418) itemoff 3331 itemsize 72 Dec 13 21:44:50 kernel: dir oid 2167736 type 1 Dec 13 21:44:50 kernel: item 11 key (704687 84 1063561078) itemoff 3278 itemsize 53 Dec 13 21:44:50 kernel: dir oid 704799 type 2 Dec 13 21:44:50 kernel: item 12 key (704687 84 1101156010) itemoff 3225 itemsize 53 Dec 13 21:44:50 kernel: dir oid 704696 type 1 Dec 13 21:44:50 kernel: item 13 key (704687 84 2521936574) itemoff 3173 itemsize 52 Dec 13 21:44:50 kernel: dir oid 704704 type 2 Dec 13 21:44:50 kernel: item 14 key (704687 84 2618368432) itemoff 3112 itemsize 61 Dec 13 21:44:50 kernel: dir oid 704738 type 1 Dec 13 21:44:50 kernel: item 15 key (704687 84 2676316190) itemoff 3046 itemsize 66 Dec 13 21:44:50 kernel: dir oid 2167729 type 1 Dec 13 21:44:50 kernel: item 16 key (704687 84 3319104192) itemoff 2986 itemsize 60 Dec 13 21:44:50 kernel: dir oid 704745 type 2 Dec 13 21:44:50 kernel: item 17 key (704687 84 3908046265) itemoff 2929 itemsize 57 Dec 13 21:44:50 kernel: dir oid 2167734 type 1 Dec 13 21:44:50 kernel: item 18 key (704687 84 3945713089) itemoff 2857 itemsize 72 Dec 13 21:44:50 kernel: dir oid 2167730 type 1 Dec 13 21:44:50 kernel: item 19 key (704687 84 4077169308) itemoff 2795 itemsize 62 Dec 13 21:44:50 kernel: dir oid 704688 type 1 Dec 13 21:44:50 kernel: item 20 key (704687 84 4146773349) itemoff 2727 itemsize 68 Dec 13 21:44:50 kernel: dir oid 707892 type 1 Dec 13 21:44:50 kernel: item 21 key (704687 84 1063561078) itemoff 2674 itemsize 53 Dec 13 21:44:50 kernel: dir oid 704799 type 2 Dec 13 21:44:50 kernel: item 22 key (704687 96 2) itemoff 2612 itemsize 62 Dec 13 21:44:50 kernel: item 23 key (704687 96 6) itemoff 2551 itemsize 61 Dec 13 21:44:50 kernel: item 24 key (704687 96 7) itemoff 2498 itemsize 53 Dec 13 21:44:50 kernel: item 25 key (704687 96 12) itemoff 2446 itemsize 52 Dec 13 21:44:50 kernel: item 26 key (704687 96 14) itemoff 2385 itemsize 61 Dec 13 21:44:50 kernel: item 27 key (704687 96 18) itemoff 2325 itemsize 60 Dec 13 21:44:50 kernel: item 28 key (704687 96 24) itemoff 2271 itemsize 54 Dec 13 21:44:50 kernel: item 29 key (704687 96 28) itemoff 2218 itemsize 53 Dec 13 21:44:50 kernel: item 30 key (704687 96 62) itemoff 2150 itemsize 68 Dec 13 21:44:50 kernel: item 31 key (704687 96 66) itemoff 2083 itemsize 67 Dec 13 21:44:50 kernel: item 32 key (704687 96 75) itemoff 2015 itemsize 68 Dec 13 21:44:50 kernel: item 33 key (704687 96 79) itemoff 1948 itemsize 67 Dec 13 21:44:50 kernel: item 34 key (704687 96 82) itemoff 1882 itemsize 66 Dec 13 21:44:50 kernel: item 35 key (704687 96 83) itemoff 1810 itemsize 72 Dec 13 21:44:50 kernel: item 36 key (704687 96 85) itemoff 1753 itemsize 57 Dec 13 21:44:50 kernel: item 37 key (704687 96 87) itemoff 1681 itemsize 72 Dec 13 21:44:50 kernel: item 38 key (704694 1 0) itemoff 1521 itemsize 160 Dec 13 21:44:50 kernel: inode generation 35534 size 30 mode 40755 Dec 13 21:44:50 kernel: BTRFS error (device dm-0): block=118444032 write time tree block corruption detected So fix that by adding the missing update of ctx->last_dir_item_offset with the offset of the boundary key. Reported-by: Chris Murphy <[email protected]> Link: https://lore.kernel.org/linux-btrfs/CAJCQCtT+RSzpUjbMq+UfzNUMe1X5+1G+DnAGbHC=OZ=iRS24jg@mail.gmail.com/ Fixes: dc2872247ec0ca ("btrfs: keep track of the last logged keys when logging a directory") Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]>
2021-12-14btrfs: fix double free of anon_dev after failure to create subvolumeFilipe Manana1-0/+8
When creating a subvolume, at create_subvol(), we allocate an anonymous device and later call btrfs_get_new_fs_root(), which in turn just calls btrfs_get_root_ref(). There we call btrfs_init_fs_root() which assigns the anonymous device to the root, but if after that call there's an error, when we jump to 'fail' label, we call btrfs_put_root(), which frees the anonymous device and then returns an error that is propagated back to create_subvol(). Than create_subvol() frees the anonymous device again. When this happens, if the anonymous device was not reallocated after the first time it was freed with btrfs_put_root(), we get a kernel message like the following: (...) [13950.282466] BTRFS: error (device dm-0) in create_subvol:663: errno=-5 IO failure [13950.283027] ida_free called for id=65 which is not allocated. [13950.285974] BTRFS info (device dm-0): forced readonly (...) If the anonymous device gets reallocated by another btrfs filesystem or any other kernel subsystem, then bad things can happen. So fix this by setting the root's anonymous device to 0 at btrfs_get_root_ref(), before we call btrfs_put_root(), if an error happened. Fixes: 2dfb1e43f57dd3 ("btrfs: preallocate anon block device at first phase of snapshot creation") CC: [email protected] # 5.10+ Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2021-12-14btrfs: fix memory leak in __add_inode_ref()Jianglei Nie1-0/+1
Line 1169 (#3) allocates a memory chunk for victim_name by kmalloc(), but when the function returns in line 1184 (#4) victim_name allocated by line 1169 (#3) is not freed, which will lead to a memory leak. There is a similar snippet of code in this function as allocating a memory chunk for victim_name in line 1104 (#1) as well as releasing the memory in line 1116 (#2). We should kfree() victim_name when the return value of backref_in_log() is less than zero and before the function returns in line 1184 (#4). 1057 static inline int __add_inode_ref(struct btrfs_trans_handle *trans, 1058 struct btrfs_root *root, 1059 struct btrfs_path *path, 1060 struct btrfs_root *log_root, 1061 struct btrfs_inode *dir, 1062 struct btrfs_inode *inode, 1063 u64 inode_objectid, u64 parent_objectid, 1064 u64 ref_index, char *name, int namelen, 1065 int *search_done) 1066 { 1104 victim_name = kmalloc(victim_name_len, GFP_NOFS); // #1: kmalloc (victim_name-1) 1105 if (!victim_name) 1106 return -ENOMEM; 1112 ret = backref_in_log(log_root, &search_key, 1113 parent_objectid, victim_name, 1114 victim_name_len); 1115 if (ret < 0) { 1116 kfree(victim_name); // #2: kfree (victim_name-1) 1117 return ret; 1118 } else if (!ret) { 1169 victim_name = kmalloc(victim_name_len, GFP_NOFS); // #3: kmalloc (victim_name-2) 1170 if (!victim_name) 1171 return -ENOMEM; 1180 ret = backref_in_log(log_root, &search_key, 1181 parent_objectid, victim_name, 1182 victim_name_len); 1183 if (ret < 0) { 1184 return ret; // #4: missing kfree (victim_name-2) 1185 } else if (!ret) { 1241 return 0; 1242 } Fixes: d3316c8233bb ("btrfs: Properly handle backref_in_log retval") CC: [email protected] # 5.10+ Reviewed-by: Qu Wenruo <[email protected]> Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Jianglei Nie <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2021-12-14selftests/bpf: Fix OOB write in test_verifierKumar Kartikeya Dwivedi1-1/+1
The commit referenced below added fixup_map_timer support (to create a BPF map containing timers), but failed to increase the size of the map_fds array, leading to out of bounds write. Fix this by changing MAX_NR_MAPS to 22. Fixes: e60e6962c503 ("selftests/bpf: Add tests for restricted helpers") Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-12-14xsk: Do not sleep in poll() when need_wakeup setMagnus Karlsson1-2/+2
Do not sleep in poll() when the need_wakeup flag is set. When this flag is set, the application needs to explicitly wake up the driver with a syscall (poll, recvmsg, sendmsg, etc.) to guarantee that Rx and/or Tx processing will be processed promptly. But the current code in poll(), sleeps first then wakes up the driver. This means that no driver processing will occur (baring any interrupts) until the timeout has expired. Fix this by checking the need_wakeup flag first and if set, wake the driver and return to the application. Only if need_wakeup is not set should the process sleep if there is a timeout set in the poll() call. Fixes: 77cd0d7b3f25 ("xsk: add support for need_wakeup flag in AF_XDP rings") Reported-by: Keith Wiles <[email protected]> Signed-off-by: Magnus Karlsson <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Maciej Fijalkowski <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-12-14iocost: Fix divide-by-zero on donation from low hweight cgroupTejun Heo1-1/+8
The donation calculation logic assumes that the donor has non-zero after-donation hweight, so the lowest active hweight a donating cgroup can have is 2 so that it can donate 1 while keeping the other 1 for itself. Earlier, we only donated from cgroups with sizable surpluses so this condition was always true. However, with the precise donation algorithm implemented, f1de2439ec43 ("blk-iocost: revamp donation amount determination") made the donation amount calculation exact enabling even low hweight cgroups to donate. This means that in rare occasions, a cgroup with active hweight of 1 can enter donation calculation triggering the following warning and then a divide-by-zero oops. WARNING: CPU: 4 PID: 0 at block/blk-iocost.c:1928 transfer_surpluses.cold+0x0/0x53 [884/94867] ... RIP: 0010:transfer_surpluses.cold+0x0/0x53 Code: 92 ff 48 c7 c7 28 d1 ab b5 65 48 8b 34 25 00 ae 01 00 48 81 c6 90 06 00 00 e8 8b 3f fe ff 48 c7 c0 ea ff ff ff e9 95 ff 92 ff <0f> 0b 48 c7 c7 30 da ab b5 e8 71 3f fe ff 4c 89 e8 4d 85 ed 74 0 4 ... Call Trace: <IRQ> ioc_timer_fn+0x1043/0x1390 call_timer_fn+0xa1/0x2c0 __run_timers.part.0+0x1ec/0x2e0 run_timer_softirq+0x35/0x70 ... iocg: invalid donation weights in /a/b: active=1 donating=1 after=0 Fix it by excluding cgroups w/ active hweight < 2 from donating. Excluding these extreme low hweight donations shouldn't affect work conservation in any meaningful way. Signed-off-by: Tejun Heo <[email protected]> Fixes: f1de2439ec43 ("blk-iocost: revamp donation amount determination") Cc: [email protected] # v5.10+ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2021-12-14Merge branch 'mlxsw-fixes'David S. Miller2-1/+32
Ido Schimmel says: ==================== mlxsw: MAC profiles occupancy fix Patch #1 fixes a router interface (RIF) MAC profiles occupancy bug that was merged in the last cycle. Patch #2 adds a selftest that fails without the fix. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-12-14selftests: mlxsw: Add a test case for MAC profiles consolidationDanielle Ratson1-0/+30
Add a test case to cover the bug fixed by the previous patch. Edit the MAC address of one netdev so that it matches the MAC address of the second netdev. Verify that the two MAC profiles were consolidated by testing that the MAC profiles occupancy decreased by one. Signed-off-by: Danielle Ratson <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-14mlxsw: spectrum_router: Consolidate MAC profiles when possibleDanielle Ratson1-1/+2
Currently, when setting a router interface (RIF) MAC address while the MAC profile is not shared with other RIFs, the profile is edited so that the new MAC address is assigned to it. This does not take into account a situation in which the new MAC address already matches an existing MAC profile. In that situation, two MAC profiles will be occupied even though they hold MAC addresses from the same profile. In order to prevent that, add a check to ensure that editing a MAC profile takes place only when the new MAC address does not match an existing profile. Fixes: 605d25cd782a6 ("mlxsw: spectrum_router: Add RIF MAC profiles support") Reported-by: Maksym Yaremchuk <[email protected]> Tested-by: Maksym Yaremchuk <[email protected]> Signed-off-by: Danielle Ratson <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-14rds: memory leak in __rds_conn_create()Hangyu Hua1-0/+1
__rds_conn_create() did not release conn->c_path when loop_trans != 0 and trans->t_prefer_loopback != 0 and is_outgoing == 0. Fixes: aced3ce57cd3 ("RDS tcp loopback connection can hang") Signed-off-by: Hangyu Hua <[email protected]> Reviewed-by: Sharath Srinivasan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-14Merge tag 'mac80211-for-net-2021-12-14' of ↵David S. Miller10-36/+90
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A fairly large number of fixes this time: * fix a station info memory leak on insert collisions * a rate control fix for retransmissions * two aggregation setup fixes * reload current regdomain when reloading database * a locking fix in regulatory work * a probe request allocation size fix in mac80211 * apply TCP vs. aggregation (sk pacing) on mesh * fix ordering of channel context update vs. station state * set up skb->dev for mesh forwarding properly * track QoS data frames only for admission control to avoid out-of-bounds read (found by syzbot) * validate extended element ID vs. existing data to avoid out-of-bounds read (found by syzbot) * fix locking in mac80211 aggregation TX setup * fix traffic stall after HW restart when TXQs are used * fix ordering of reconfig/restart after HW restart * fix interface type for extended aggregation capability lookup ==================== Signed-off-by: David S. Miller <[email protected]>
2021-12-14Merge branch '40GbE' of ↵David S. Miller1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-12-13 This series contains updates to iavf driver only. Dan Carpenter fixes some missing mutex unlocking. Stefan Assmann restores stopping watchdog from overriding to reset state. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-12-14flow_offload: return EOPNOTSUPP for the unsupported mpls action typeBaowen Zheng1-0/+1
We need to return EOPNOTSUPP for the unsupported mpls action type when setup the flow action. In the original implement, we will return 0 for the unsupported mpls action type, actually we do not setup it and the following actions to the flow action entry. Fixes: 9838b20a7fb2 ("net: sched: take rtnl lock in tc_setup_flow_action()") Signed-off-by: Baowen Zheng <[email protected]> Signed-off-by: Simon Horman <[email protected]> Acked-by: Jamal Hadi Salim <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-14net: stmmac: fix tc flower deletion for VLAN priority Rx steeringOng Boon Leong2-13/+90
To replicate the issue:- 1) Add 1 flower filter for VLAN Priority based frame steering:- $ IFDEVNAME=eth0 $ tc qdisc add dev $IFDEVNAME ingress $ tc qdisc add dev $IFDEVNAME root mqprio num_tc 8 \ map 0 1 2 3 4 5 6 7 0 0 0 0 0 0 0 0 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0 $ tc filter add dev $IFDEVNAME parent ffff: protocol 802.1Q \ flower vlan_prio 0 hw_tc 0 2) Get the 'pref' id $ tc filter show dev $IFDEVNAME ingress 3) Delete a specific tc flower record (say pref 49151) $ tc filter del dev $IFDEVNAME parent ffff: pref 49151 From dmesg, we will observe kernel NULL pointer ooops [ 197.170464] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 197.171367] #PF: supervisor read access in kernel mode [ 197.171367] #PF: error_code(0x0000) - not-present page [ 197.171367] PGD 0 P4D 0 [ 197.171367] Oops: 0000 [#1] PREEMPT SMP NOPTI <snip> [ 197.171367] RIP: 0010:tc_setup_cls+0x20b/0x4a0 [stmmac] <snip> [ 197.171367] Call Trace: [ 197.171367] <TASK> [ 197.171367] ? __stmmac_disable_all_queues+0xa8/0xe0 [stmmac] [ 197.171367] stmmac_setup_tc_block_cb+0x70/0x110 [stmmac] [ 197.171367] tc_setup_cb_destroy+0xb3/0x180 [ 197.171367] fl_hw_destroy_filter+0x94/0xc0 [cls_flower] The above issue is due to previous incorrect implementation of tc_del_vlan_flow(), shown below, that uses flow_cls_offload_flow_rule() to get struct flow_rule *rule which is no longer valid for tc filter delete operation. struct flow_rule *rule = flow_cls_offload_flow_rule(cls); struct flow_dissector *dissector = rule->match.dissector; So, to ensure tc_del_vlan_flow() deletes the right VLAN cls record for earlier configured RX queue (configured by hw_tc) in tc_add_vlan_flow(), this patch introduces stmmac_rfs_entry as driver-side flow_cls_offload record for 'RX frame steering' tc flower, currently used for VLAN priority. The implementation has taken consideration for future extension to include other type RX frame steering such as EtherType based. v2: - Clean up overly extensive backtrace and rewrite git message to better explain the kernel NULL pointer issue. Fixes: 0e039f5cf86c ("net: stmmac: add RX frame steering based on VLAN priority in tc flower") Tested-by: Kurt Kanzenbach <[email protected]> Signed-off-by: Ong Boon Leong <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-14PCI/MSI: Clear PCI_MSIX_FLAGS_MASKALL on errorThomas Gleixner1-1/+1
PCI_MSIX_FLAGS_MASKALL is set in the MSI-X control register at MSI-X interrupt setup time. It's cleared on success, but the error handling path only clears the PCI_MSIX_FLAGS_ENABLE bit. That's incorrect as the reset state of the PCI_MSIX_FLAGS_MASKALL bit is zero. That can be observed via lspci: Capabilities: [b0] MSI-X: Enable- Count=67 Masked+ Clear the bit in the error path to restore the reset state. Fixes: 438553958ba1 ("PCI/MSI: Enable and mask MSI-X early") Reported-by: Stefan Roese <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Stefan Roese <[email protected]> Cc: [email protected] Cc: Bjorn Helgaas <[email protected]> Cc: Michal Simek <[email protected]> Cc: Marek Vasut <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/87tufevoqx.ffs@tglx
2021-12-14PCI/MSI: Mask MSI-X vectors only on successStefan Roese1-3/+10
Masking all unused MSI-X entries is done to ensure that a crash kernel starts from a clean slate, which correponds to the reset state of the device as defined in the PCI-E specificion 3.0 and later: Vector Control for MSI-X Table Entries -------------------------------------- "00: Mask bit: When this bit is set, the function is prohibited from sending a message using this MSI-X Table entry. ... This bit’s state after reset is 1 (entry is masked)." A Marvell NVME device fails to deliver MSI interrupts after trying to enable MSI-X interrupts due to that masking. It seems to take the MSI-X mask bits into account even when MSI-X is disabled. While not specification compliant, this can be cured by moving the masking into the success path, so that the MSI-X table entries stay in device reset state when the MSI-X setup fails. [ tglx: Move it into the success path, add comment and amend changelog ] Fixes: aa8092c1d1f1 ("PCI/MSI: Mask all unused MSI-X entries") Signed-off-by: Stefan Roese <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: Bjorn Helgaas <[email protected]> Cc: Michal Simek <[email protected]> Cc: Marek Vasut <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2021-12-14powerpc/module_64: Fix livepatching for RO modulesRussell Currey1-8/+34
Livepatching a loaded module involves applying relocations through apply_relocate_add(), which attempts to write to read-only memory when CONFIG_STRICT_MODULE_RWX=y. Work around this by performing these writes through the text poke area by using patch_instruction(). R_PPC_REL24 is the only relocation type generated by the kpatch-build userspace tool or klp-convert kernel tree that I observed applying a relocation to a post-init module. A more comprehensive solution is planned, but using patch_instruction() for R_PPC_REL24 on should serve as a sufficient fix. This does have a performance impact, I observed ~15% overhead in module_load() on POWER8 bare metal with checksum verification off. Fixes: c35717c71e98 ("powerpc: Set ARCH_HAS_STRICT_MODULE_RWX") Cc: [email protected] # v5.14+ Reported-by: Joe Lawrence <[email protected]> Signed-off-by: Russell Currey <[email protected]> Tested-by: Joe Lawrence <[email protected]> [mpe: Check return codes from patch_instruction()] Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-12-14mac80211: do drv_reconfig_complete() before restarting allJohannes Berg1-7/+7
When we reconfigure, the driver might do some things to complete the reconfiguration. It's strange and could be broken in some cases because we restart other works (e.g. remain-on-channel and TX) before this happens, yet only start queues later. Change this to do the reconfig complete when reconfiguration is actually complete, not when we've already started doing other things again. For iwlwifi, this should fix a race where the reconfig can race with TX, for ath10k and ath11k that also use this it won't make a difference because they just start queues there, and mac80211 also stopped the queues and will restart them later as before. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20211129152938.cab99f22fe19.Iefe494687f15fd85f77c1b989d1149c8efdfdc36@changeid Signed-off-by: Johannes Berg <[email protected]>
2021-12-14mac80211: mark TX-during-stop for TX in in_reconfigJohannes Berg1-1/+4
Mark TXQs as having seen transmit while they were stopped if we bail out of drv_wake_tx_queue() due to reconfig, so that the queue wake after this will make them catch up. This is particularly necessary for when TXQs are used for management packets since those TXQs won't see a lot of traffic that'd make them catch up later. Cc: [email protected] Fixes: 4856bfd23098 ("mac80211: do not call driver wake_tx_queue op during reconfig") Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20211129152938.4573a221c0e1.I0d1d5daea3089be3fc0dccc92991b0f8c5677f0c@changeid Signed-off-by: Johannes Berg <[email protected]>
2021-12-14mac80211: update channel context before station stateMordechay Goodstein1-6/+9
Currently channel context is updated only after station got an update about new assoc state, this results in station using the old channel context. Fix this by moving the update channel context before updating station, enabling the driver to immediately use the updated channel context in the new assoc state. Signed-off-by: Mordechay Goodstein <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20211129152938.1c80c17ffd8a.I94ae31378b363c1182cfdca46c4b7e7165cff984@changeid Signed-off-by: Johannes Berg <[email protected]>
2021-12-14mac80211: Fix the size used for building probe requestIlan Peer1-1/+1
Instead of using the hard-coded value of '100' use the correct scan IEs length as calculated during HW registration to mac80211. Signed-off-by: Ilan Peer <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20211129152938.0a82d6891719.I8ded1f2e0bccb9e71222c945666bcd86537f2e35@changeid Signed-off-by: Johannes Berg <[email protected]>
2021-12-14mac80211: fix lookup when adding AddBA extension elementJohannes Berg1-2/+3
We should be doing the HE capabilities lookup based on the full interface type so if P2P doesn't have HE but client has it doesn't get confused. Fix that. Fixes: 2ab45876756f ("mac80211: add support for the ADDBA extension element") Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20211129152938.010fc1d61137.If3a468145f29d670cb00a693bed559d8290ba693@changeid Signed-off-by: Johannes Berg <[email protected]>
2021-12-14mac80211: validate extended element ID is presentJohannes Berg1-1/+6
Before attempting to parse an extended element, verify that the extended element ID is present. Fixes: 41cbb0f5a295 ("mac80211: add support for HE") Reported-by: [email protected] Link: https://lore.kernel.org/r/20211211201023.f30a1b128c07.I5cacc176da94ba316877c6e10fe3ceec8b4dbd7d@changeid Cc: [email protected] Signed-off-by: Johannes Berg <[email protected]>
2021-12-14cfg80211: Acquire wiphy mutex on regulatory workIlan Peer1-1/+6
The function cfg80211_reg_can_beacon_relax() expects wiphy mutex to be held when it is being called. However, when reg_leave_invalid_chans() is called the mutex is not held. Fix it by acquiring the lock before calling the function. Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") Signed-off-by: Ilan Peer <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20211202152831.527686cda037.I40ad9372a47cbad53b4aae7b5a6ccc0dc3fddf8b@changeid Signed-off-by: Johannes Berg <[email protected]>
2021-12-14mac80211: agg-tx: don't schedule_and_wake_txq() under sta->lockJohannes Berg1-2/+8
When we call ieee80211_agg_start_txq(), that will in turn call schedule_and_wake_txq(). Called from ieee80211_stop_tx_ba_cb() this is done under sta->lock, which leads to certain circular lock dependencies, as reported by Chris Murphy: https://lore.kernel.org/r/CAJCQCtSXJ5qA4bqSPY=oLRMbv-irihVvP7A2uGutEbXQVkoNaw@mail.gmail.com In general, ieee80211_agg_start_txq() is usually not called with sta->lock held, only in this one place. But it's always called with sta->ampdu_mlme.mtx held, and that's therefore clearly sufficient. Change ieee80211_stop_tx_ba_cb() to also call it without the sta->lock held, by factoring it out of ieee80211_remove_tid_tx() (which is only called in this one place). This breaks the locking chain and makes it less likely that we'll have similar locking chain problems in the future. Fixes: ba8c3d6f16a1 ("mac80211: add an intermediate software queue implementation") Reported-by: Chris Murphy <[email protected]> Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20211202152554.f519884c8784.I555fef8e67d93fff3d9a304886c4a9f8b322e591@changeid Signed-off-by: Johannes Berg <[email protected]>
2021-12-14nl80211: remove reload flag from regulatory_requestFinn Behrens2-5/+2
This removes the previously unused reload flag, which was introduced in 1eda919126b4. The request is handled as NL80211_REGDOM_SET_BY_CORE, which is parsed unconditionally. Reported-by: kernel test robot <[email protected]> Reported-by: Nathan Chancellor <[email protected]> Fixes: 1eda919126b4 ("nl80211: reset regdom when reloading regdb") Link: https://lore.kernel.org/all/YaZuKYM5bfWe2Urn@archlinux-ax161/ Signed-off-by: Finn Behrens <[email protected]> Reviewed-by: Nathan Chancellor <[email protected]> Link: https://lore.kernel.org/r/YadvTolO8rQcNCd/@gimli.kloenk.dev Signed-off-by: Johannes Berg <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.