| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Anatoly Pugachev reported sparc64 breakage on the patch:
https://lore.kernel.org/r/[email protected]
The sparc64 impl of pte_mkdirty() is definitely slightly special in that
it leverages a code patching mechanism for sun4u/sun4v on relevant pgtable
entry operations.
Before having a clue of why the sparc64 is special and caused the patch to
SIGSEGV the processes, revert the patch for now. The swap path of dirty
bit inheritage is kept because that's using the swap shared code so we
assume it'll not be affected.
Link: https://lkml.kernel.org/r/Y1Wbi4yyVvDtg4zN@x1n
Fixes: 0ccf7f168e17 ("mm/thp: carry over dirty bit when thp splits on pmd")
Signed-off-by: Peter Xu <[email protected]>
Reported-by: Anatoly Pugachev <[email protected]>
Tested-by: Anatoly Pugachev <[email protected]>
Cc: Alistair Popple <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: "Huang, Ying" <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: "Kirill A . Shutemov" <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Nadav Amit <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
A semaphore deadlock can occur if nilfs_get_block() detects metadata
corruption while locating data blocks and a superblock writeback occurs at
the same time:
task 1 task 2
------ ------
* A file operation *
nilfs_truncate()
nilfs_get_block()
down_read(rwsem A) <--
nilfs_bmap_lookup_contig()
... generic_shutdown_super()
nilfs_put_super()
* Prepare to write superblock *
down_write(rwsem B) <--
nilfs_cleanup_super()
* Detect b-tree corruption * nilfs_set_log_cursor()
nilfs_bmap_convert_error() nilfs_count_free_blocks()
__nilfs_error() down_read(rwsem A) <--
nilfs_set_error()
down_write(rwsem B) <--
*** DEADLOCK ***
Here, nilfs_get_block() readlocks rwsem A (= NILFS_MDT(dat_inode)->mi_sem)
and then calls nilfs_bmap_lookup_contig(), but if it fails due to metadata
corruption, __nilfs_error() is called from nilfs_bmap_convert_error()
inside the lock section.
Since __nilfs_error() calls nilfs_set_error() unless the filesystem is
read-only and nilfs_set_error() attempts to writelock rwsem B (=
nilfs->ns_sem) to write back superblock exclusively, hierarchical lock
acquisition occurs in the order rwsem A -> rwsem B.
Now, if another task starts updating the superblock, it may writelock
rwsem B during the lock sequence above, and can deadlock trying to
readlock rwsem A in nilfs_count_free_blocks().
However, there is actually no need to take rwsem A in
nilfs_count_free_blocks() because it, within the lock section, only reads
a single integer data on a shared struct with
nilfs_sufile_get_ncleansegs(). This has been the case after commit
aa474a220180 ("nilfs2: add local variable to cache the number of clean
segments"), that is, even before this bug was introduced.
So, this resolves the deadlock problem by just not taking the semaphore in
nilfs_count_free_blocks().
Link: https://lkml.kernel.org/r/[email protected]
Fixes: e828949e5b42 ("nilfs2: call nilfs_error inside bmap routines")
Signed-off-by: Ryusuke Konishi <[email protected]>
Reported-by: [email protected]
Tested-by: Ryusuke Konishi <[email protected]>
Cc: <[email protected]> [2.6.38+
Signed-off-by: Andrew Morton <[email protected]>
|
|
There is a memory leak reported by kmemleak:
unreferenced object 0xffff88817231ce40 (size 224):
comm "mount.cifs", pid 19308, jiffies 4295917571 (age 405.880s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
60 c0 b2 00 81 88 ff ff 98 83 01 42 81 88 ff ff `..........B....
backtrace:
[<ffffffff81936171>] __alloc_file+0x21/0x250
[<ffffffff81937051>] alloc_empty_file+0x41/0xf0
[<ffffffff81937159>] alloc_file+0x59/0x710
[<ffffffff81937964>] alloc_file_pseudo+0x154/0x210
[<ffffffff81741dbf>] __shmem_file_setup+0xff/0x2a0
[<ffffffff817502cd>] shmem_zero_setup+0x8d/0x160
[<ffffffff817cc1d5>] mmap_region+0x1075/0x19d0
[<ffffffff817cd257>] do_mmap+0x727/0x1110
[<ffffffff817518b2>] vm_mmap_pgoff+0x112/0x1e0
[<ffffffff83adf955>] do_syscall_64+0x35/0x80
[<ffffffff83c0006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
The root cause was traced to an error handing path in mmap_region() when
arch_validate_flags() or mas_preallocate() fails. In the shared anonymous
mapping sence, vma will be setuped and mapped with a new shared anonymous
file via shmem_zero_setup(). So in this case, the file resource needs to
be released.
Fix it by calling fput(vma->vm_file) and unmap_region() when
arch_validate_flags() or mas_preallocate() returns an error in the shared
anonymous mapping sence.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: d4af56c5c7c6 ("mm: start tracking VMAs with maple tree")
Fixes: c462ac288f2c ("mm: Introduce arch_validate_flags()")
Signed-off-by: Li Zetao <[email protected]>
Reviewed-by: Liam R. Howlett <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
This change is very similar to the change that was made for shmem [1], and
it solves the same problem but for HugeTLBFS instead.
Currently, when poison is found in a HugeTLB page, the page is removed
from the page cache. That means that attempting to map or read that
hugepage in the future will result in a new hugepage being allocated
instead of notifying the user that the page was poisoned. As [1] states,
this is effectively memory corruption.
The fix is to leave the page in the page cache. If the user attempts to
use a poisoned HugeTLB page with a syscall, the syscall will fail with
EIO, the same error code that shmem uses. For attempts to map the page,
the thread will get a BUS_MCEERR_AR SIGBUS.
[1]: commit a76054266661 ("mm: shmem: don't truncate page if memory failure happens")
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: James Houghton <[email protected]>
Reviewed-by: Mike Kravetz <[email protected]>
Reviewed-by: Naoya Horiguchi <[email protected]>
Tested-by: Naoya Horiguchi <[email protected]>
Reviewed-by: Yang Shi <[email protected]>
Cc: Axel Rasmussen <[email protected]>
Cc: James Houghton <[email protected]>
Cc: Miaohe Lin <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Along the development cycle, the testing code support for module/in-kernel
compiles was removed. Restore this functionality by moving any internal
API tests to the userspace side, as well as threading tests. Fix the
lockdep issues and add a way to reduce memory usage so the tests can
complete with KASAN + memleak detection. Make the tests work on 32 bit
hosts where possible and detect 32 bit hosts in the radix test suite.
[[email protected]: fix module export]
[[email protected]: fix it some more]
[[email protected]: fix compile warnings on 32bit build in check_find()]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Liam R. Howlett <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
clang-analyzer reported some Dead Stores in mas_anode_descend(). Upon
inspection, there were a few clean ups that would make the code cleaner:
The count variable was set from the mt_slots array and then updated but
never used again. Just use the array reference directly.
Also stop updating the type since it isn't used after the update.
Stop setting the gaps pointer to NULL at the start since it is always
set before the loop begins.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Liam R. Howlett <[email protected]>
Suggested-by: Lukas Bulwahn <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
There is a more direct and cleaner way of implementing the same functional
code. Remove the confusing and unnecessary use of pointers here.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Liam R. Howlett <[email protected]>
Suggested-by: Lukas Bulwahn <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
can 2022-11-07
The first patch is by Chen Zhongjin and adds a missing
dev_remove_pack() to the AF_CAN protocol.
Zhengchao Shao's patch fixes a potential NULL pointer deref in
AF_CAN's can_rx_register().
The next patch is by Oliver Hartkopp and targets the CAN ISO-TP
protocol, and fixes the state handling for echo TX processing.
Oliver Hartkopp's patch for the j1939 protocol adds a missing
initialization of the CAN headers inside outgoing skbs.
Another patch by Oliver Hartkopp fixes an out of bounds read in the
check for invalid CAN frames in the xmit callback of virtual CAN
devices. This touches all non virtual device drivers as we decided to
rename the function requiring that netdev_priv points to a struct
can_priv.
(Note: This patch will create a merge conflict with net-next where the
pch_can driver has removed.)
The last patch is by Geert Uytterhoeven and adds the missing ECC error
checks for the channels 2-7 in the rcar_canfd driver.
* tag 'linux-can-fixes-for-6.1-20221107' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: rcar_canfd: Add missing ECC error checks for channels 2-7
can: dev: fix skb drop check
can: j1939: j1939_send_one(): fix missing CAN header initialization
can: isotp: fix tx state handling for echo tx processing
can: af_can: fix NULL pointer dereference in can_rx_register()
can: af_can: can_exit(): add missing dev_remove_pack() of canxl_packet
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
syzbot reported a warning like below [1]:
WARNING: CPU: 3 PID: 9 at net/netfilter/nf_tables_api.c:10096 nf_tables_exit_net+0x71c/0x840
Modules linked in:
CPU: 2 PID: 9 Comm: kworker/u8:0 Tainted: G W 6.1.0-rc3-00072-g8e5423e991e8 #47
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
Workqueue: netns cleanup_net
RIP: 0010:nf_tables_exit_net+0x71c/0x840
...
Call Trace:
<TASK>
? __nft_release_table+0xfc0/0xfc0
ops_exit_list+0xb5/0x180
cleanup_net+0x506/0xb10
? unregister_pernet_device+0x80/0x80
process_one_work+0xa38/0x1730
? pwq_dec_nr_in_flight+0x2b0/0x2b0
? rwlock_bug.part.0+0x90/0x90
? _raw_spin_lock_irq+0x46/0x50
worker_thread+0x67e/0x10e0
? process_one_work+0x1730/0x1730
kthread+0x2e5/0x3a0
? kthread_complete_and_exit+0x40/0x40
ret_from_fork+0x1f/0x30
</TASK>
In nf_tables_exit_net(), there is a case where nft_net->commit_list is
empty but nft_net->module_list is not empty. Such a case occurs with
the following scenario:
1. nfnetlink_rcv_batch() is called
2. nf_tables_newset() returns -EAGAIN and NFNL_BATCH_FAILURE bit is
set to status
3. nf_tables_abort() is called with NFNL_ABORT_AUTOLOAD
(nft_net->commit_list is released, but nft_net->module_list is not
because of NFNL_ABORT_AUTOLOAD flag)
4. Jump to replay label
5. netlink_skb_clone() fails and returns from the function (this is
caused by fault injection in the reproducer of syzbot)
This patch fixes this issue by calling __nf_tables_abort() when
nft_net->module_list is not empty in nf_tables_exit_net().
Fixes: eb014de4fd41 ("netfilter: nf_tables: autoload modules from the abort path")
Link: https://syzkaller.appspot.com/bug?id=802aba2422de4218ad0c01b46c9525cc9d4e4aa3 [1]
Reported-by: [email protected]
Signed-off-by: Shigeru Yoshida <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
|
|
When type is NFNL_CB_MUTEX and -EAGAIN error occur in nfnetlink_rcv_msg(),
it does not execute nfnl_unlock(). That would trigger potential dead lock.
Fixes: 50f2db9e368f ("netfilter: nfnetlink: consolidate callback types")
Signed-off-by: Ziyang Xuan <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
|
|
Commit 3af1dfdd51e06697 ("perf build: Move perf_dlfilters.h in the
source tree") moved perf_dlfilters.h to the include/perf/ directory
while include/perf is ignored because it has 'perf' in the name. Newly
created files in the include/perf/ directory will be ignored.
Testing:
Before:
$ touch tools/perf/include/perf/junk
$ git status | grep junk
$ git check-ignore -v tools/perf/include/perf/junk
tools/perf/.gitignore:6:perf tools/perf/include/perf/junk
After:
$ git status | grep junk
tools/perf/include/perf/junk
$ git check-ignore -v tools/perf/include/perf/junk
Add !include/perf/ to perf's .gitignore file.
Fixes: 3af1dfdd51e06697 ("perf build: Move perf_dlfilters.h in the source tree")
Signed-off-by: Donglin Peng <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Commit f4a2aade6809c657 ("perf tests powerpc: Fix branch stack sampling
test to include sanity check for branch filter") added a skip if certain
branch options aren't available.
But the change added both -b (--branch-any) and --branch-filter options
at the same time, which will always result in a failure on any platform
because the arguments can't be used together.
Fix this by removing -b (--branch-any) and leaving --branch-filter which
already specifies 'any'. Also add warning messages to the test and perf
tool.
Output on x86 before this fix:
$ sudo ./perf test branch
108: Check branch stack sampling : Skip
After:
$ sudo ./perf test branch
108: Check branch stack sampling : Ok
Fixes: f4a2aade6809c657 ("perf tests powerpc: Fix branch stack sampling test to include sanity check for branch filter")
Signed-off-by: James Clark <[email protected]>
Tested-by: Athira Jajeev <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: [email protected]
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
'perf stat' with CSV output option prints an extra empty string as first
field in metrics output line. Sample output below:
# ./perf stat -x, --per-socket -a -C 1 ls
S0,1,1.78,msec,cpu-clock,1785146,100.00,0.973,CPUs utilized
S0,1,26,,context-switches,1781750,100.00,0.015,M/sec
S0,1,1,,cpu-migrations,1780526,100.00,0.561,K/sec
S0,1,1,,page-faults,1779060,100.00,0.561,K/sec
S0,1,875807,,cycles,1769826,100.00,0.491,GHz
S0,1,85281,,stalled-cycles-frontend,1767512,100.00,9.74,frontend cycles idle
S0,1,576839,,stalled-cycles-backend,1766260,100.00,65.86,backend cycles idle
S0,1,288430,,instructions,1762246,100.00,0.33,insn per cycle
====> ,S0,1,,,,,,,2.00,stalled cycles per insn
The above command line uses field separator as "," via "-x," option and
per-socket option displays socket value as first field. But here the
last line for "stalled cycles per insn" has "," in the beginning.
Sample output using interval mode:
# ./perf stat -I 1000 -x, --per-socket -a -C 1 ls
0.001813453,S0,1,1.87,msec,cpu-clock,1872052,100.00,0.002,CPUs utilized
0.001813453,S0,1,2,,context-switches,1868028,100.00,1.070,K/sec
------
0.001813453,S0,1,85379,,instructions,1856754,100.00,0.32,insn per cycle
====> 0.001813453,,S0,1,,,,,,,1.34,stalled cycles per insn
Above result also has an extra CSV separator after
the timestamp. Patch addresses extra field separator
in the beginning of the metric output line.
The counter stats are displayed by function
"perf_stat__print_shadow_stats" in code
"util/stat-shadow.c". While printing the stats info
for "stalled cycles per insn", function "new_line_csv"
is used as new_line callback.
The new_line_csv function has check for "os->prefix"
and if prefix is not null, it will be printed along
with cvs separator.
Snippet from "new_line_csv":
if (os->prefix)
fprintf(os->fh, "%s%s", os->prefix, config->csv_sep);
Here os->prefix gets printed followed by ","
which is the cvs separator. The os->prefix is
used in interval mode option ( -I ), to print
time stamp on every new line. But prefix is
already set to contain CSV separator when used
in interval mode for CSV option.
Reference: Function "static void print_interval"
Snippet:
sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, config->csv_sep);
Also if prefix is not assigned (if not used with
-I option), it gets set to empty string.
Reference: function printout() in util/stat-display.c
Snippet:
.prefix = prefix ? prefix : "",
Since prefix already set to contain cvs_sep in interval
option, patch removes printing config->csv_sep in
new_line_csv function to avoid printing extra field.
After the patch:
# ./perf stat -x, --per-socket -a -C 1 ls
S0,1,2.04,msec,cpu-clock,2045202,100.00,1.013,CPUs utilized
S0,1,2,,context-switches,2041444,100.00,979.289,/sec
S0,1,0,,cpu-migrations,2040820,100.00,0.000,/sec
S0,1,2,,page-faults,2040288,100.00,979.289,/sec
S0,1,254589,,cycles,2036066,100.00,0.125,GHz
S0,1,82481,,stalled-cycles-frontend,2032420,100.00,32.40,frontend cycles idle
S0,1,113170,,stalled-cycles-backend,2031722,100.00,44.45,backend cycles idle
S0,1,88766,,instructions,2030942,100.00,0.35,insn per cycle
S0,1,,,,,,,1.27,stalled cycles per insn
Fixes: 92a61f6412d3a09d ("perf stat: Implement CSV metrics output")
Reported-by: Disha Goel <[email protected]>
Reviewed-By: Kajol Jain <[email protected]>
Signed-off-by: Athira Jajeev <[email protected]>
Tested-by: Disha Goel <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: [email protected]
Cc: Madhavan Srinivasan <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Nageswara R Sastry <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The following command will get segfault due to missing aggr_header_csv
for AGGR_NODE:
$ sudo perf stat -a --per-node -x, --metric-only true
Committer testing:
Before this patch:
# perf stat -a --per-node -x, --metric-only true
Segmentation fault (core dumped)
#
After:
# gdb perf
-bash: gdb: command not found
# perf stat -a --per-node -x, --metric-only true
node,Ghz,frontend cycles idle,backend cycles idle,insn per cycle,branch-misses of all branches,
N0,32,0.335,2.10,0.65,0.69,0.03,1.92,
#
Fixes: 86895b480a2f10c7 ("perf stat: Add --per-node agregation support")
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit fix from Paul Moore:
"A small audit patch to fix an instance of undefined behavior in a
shift operator caused when shifting a signed value too far, the same
case as the lsm patch merged previously.
While the fix is trivial and I can't imagine it causing a problem in a
backport, I'm not explicitly marking it for stable on the off chance
that there is some system out there which is relying on some wonky
unexpected behavior which this patch could break; *if* it does break,
IMO it's better that to happen in a minor or -rcX release and not in a
stable backport"
* tag 'audit-pr-20221107' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: fix undefined behavior in bit shift for AUDIT_BIT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm fix from Paul Moore:
"A small capability patch to fix an instance of undefined behavior in a
shift operator caused when shifting a signed value too far.
While the fix is trivial and I can't imagine it causing a problem in a
backport, I'm not explicitly marking it for stable on the off chance
that there is some system out there which is relying on some wonky
unexpected behavior which this patch could break; *if* it does break,
IMO it's better that to happen in a minor or -rcX release and not in a
stable backport"
* tag 'lsm-pr-20221107' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
capabilities: fix undefined behavior in bit shift for CAP_TO_MASK
|
|
Nathan Chancellor reported several link errors on s390 with
CONFIG_RELOCATABLE disabled, after binutils commit 906f69cf65da ("IBM
zSystems: Issue error for *DBL relocs on misaligned symbols"). The binutils
commit reveals potential miscompiles that might have happened already
before with linker script defined symbols at odd addresses.
A similar bug was recently fixed in the kernel with commit c9305b6c1f52
("s390: fix nospec table alignments").
See https://github.com/ClangBuiltLinux/linux/issues/1747 for an analysis
from Ulich Weigand.
Therefore always build a relocatable kernel to avoid this problem. There is
hardly any use-case for non-relocatable kernels, so this shouldn't be
controversial.
Link: https://github.com/ClangBuiltLinux/linux/issues/1747
Signed-off-by: Heiko Carstens <[email protected]>
Reported-by: Nathan Chancellor <[email protected]>
Tested-by: Nathan Chancellor <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexander Gordeev <[email protected]>
|
|
Add kasan.config addon config file which allows to easily enable KASAN
into the current kernel config.
Reviewed-by: Alexander Gordeev <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Alexander Gordeev <[email protected]>
|
|
CONFIG_DEBUG_INFO_BTF significantly increases compile time for the
kernel. E.g. when changing a single C file compile time for a new bzImage
is increased by ~50% if BTF debug info is generated.
Therefore remove CONFIG_DEBUG_INFO_BTF from all defconfigs and introduce a
btf.config addon config file. Quickly enabling CONFIG_DEBUG_INFO_BTF into
the current kernel config can be done by simply invoking
make btf.config
Reviewed-by: Alexander Gordeev <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Alexander Gordeev <[email protected]>
|
|
Commit d4c639990036 ("vmlinux.lds.h: Avoid orphan section with !SMP")
fixed an orphan section warning by adding the '.data..decrypted' section
to the linker script under the PERCPU_DECRYPTED_SECTION define but that
placement introduced a panic with !SMP, as the percpu sections are not
instantiated with that configuration so attempting to access variables
defined with DEFINE_PER_CPU_DECRYPTED() will result in a page fault.
Move the '.data..decrypted' section to the DATA_MAIN define so that the
variables in it are properly instantiated at boot time with
CONFIG_SMP=n.
Cc: [email protected]
Fixes: d4c639990036 ("vmlinux.lds.h: Avoid orphan section with !SMP")
Link: https://lore.kernel.org/[email protected]/
Debugged-by: Ard Biesheuvel <[email protected]>
Reported-by: Zhao Wenhui <[email protected]>
Tested-by: xiafukun <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
io_cqring_wait (and it's wake function io_has_work) used cached_cq_tail in
order to calculate the number of CQEs. cached_cq_tail is set strictly
before the user visible rings->cq.tail
However as far as userspace is concerned, if io_uring_enter(2) is called
with a minimum number of events, they will verify by checking
rings->cq.tail.
It is therefore possible for io_uring_enter(2) to return early with fewer
events visible to the user.
Instead make the wait functions read from the user visible value, so there
will be no discrepency.
This is triggered eventually by the following reproducer:
struct io_uring_sqe *sqe;
struct io_uring_cqe *cqe;
unsigned int cqe_ready;
struct io_uring ring;
int ret, i;
ret = io_uring_queue_init(N, &ring, 0);
assert(!ret);
while(true) {
for (i = 0; i < N; i++) {
sqe = io_uring_get_sqe(&ring);
io_uring_prep_nop(sqe);
sqe->flags |= IOSQE_ASYNC;
}
ret = io_uring_submit(&ring);
assert(ret == N);
do {
ret = io_uring_wait_cqes(&ring, &cqe, N, NULL, NULL);
} while(ret == -EINTR);
cqe_ready = io_uring_cq_ready(&ring);
assert(!ret);
assert(cqe_ready == N);
io_uring_cq_advance(&ring, N);
}
Fixes: ad3eb2c89fb2 ("io_uring: split overflow state into SQ and CQ side")
Signed-off-by: Dylan Yudaken <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
nfsd_lookup_dentry returns an export reference in addition to the dentry
ref. Ensure that we put it too.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2138866
Fixes: 876c553cb410 ("NFSD: verify the opened dentry after setting a delegation")
Reported-by: Yongcheng Yang <[email protected]>
Signed-off-by: Jeff Layton <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>
|
|
Commit 2e8cff0a0eee87b2 ("arm64: fix rodata=full") addressed a couple of
issues with the rodata= kernel command line option, which is not a
simple boolean on arm64, and inadvertently got broken due to changes in
the generic bool handling.
Unfortunately, the resulting code never clears the rodata_full boolean
variable if it defaults to true and rodata=on or rodata=off is passed,
as the generic code is not aware of the existence of this variable.
Given the way this code is plumbed together, clearing rodata_full when
returning false from arch_parse_debug_rodata() may result in
inconsistencies if the generic code decides that it cannot parse the
right hand side, so the best way to deal with this is to only take
rodata_full in account if rodata_enabled is also true.
Fixes: 2e8cff0a0eee ("arm64: fix rodata=full")
Cc: <[email protected]> # 6.0.x
Signed-off-by: Ard Biesheuvel <[email protected]>
Acked-by: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
When failed to register irq in xgene_enet_open() for opening device,
napi isn't disabled. When open xgene device next time, it will reports
a invalid opcode issue. Fix it. Only be compiled, not be tested.
Fixes: aeb20b6b3f4e ("drivers: net: xgene: fix: ifconfig up/down crash")
Signed-off-by: Zhengchao Shao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
In accordance with [1] the DMA-able memory buffers must be
cacheline-aligned otherwise the cache writing-back and invalidation
performed during the mapping may cause the adjacent data being lost. It's
specifically required for the DMA-noncoherent platforms [2]. Seeing the
opal_dev.{cmd,resp} buffers are implicitly used for DMAs in the NVME and
SCSI/SD drivers in framework of the nvme_sec_submit() and sd_sec_submit()
methods respectively they must be cacheline-aligned to prevent the denoted
problem. One of the option to guarantee that is to kmalloc the buffers
[2]. Let's explicitly allocate them then instead of embedding into the
opal_dev structure instance.
Note this fix was inspired by the commit c94b7f9bab22 ("nvme-hwmon:
kmalloc the NVME SMART log buffer").
[1] Documentation/core-api/dma-api.rst
[2] Documentation/core-api/dma-api-howto.rst
Fixes: 455a7b238cd6 ("block: Add Sed-opal library")
Signed-off-by: Serge Semin <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Out test found a following problem in kernel 5.10, and the same problem
should exist in mainline:
BUG: kernel NULL pointer dereference, address: 0000000000000094
PGD 0 P4D 0
Oops: 0000 [#1] SMP
CPU: 7 PID: 155 Comm: kworker/7:1 Not tainted 5.10.0-01932-g19e0ace2ca1d-dirty 4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-b4
Workqueue: kthrotld blk_throtl_dispatch_work_fn
RIP: 0010:bfq_bio_bfqg+0x52/0xc0
Code: 94 00 00 00 00 75 2e 48 8b 40 30 48 83 05 35 06 c8 0b 01 48 85 c0 74 3d 4b
RSP: 0018:ffffc90001a1fba0 EFLAGS: 00010002
RAX: ffff888100d60400 RBX: ffff8881132e7000 RCX: 0000000000000000
RDX: 0000000000000017 RSI: ffff888103580a18 RDI: ffff888103580a18
RBP: ffff8881132e7000 R08: 0000000000000000 R09: ffffc90001a1fe10
R10: 0000000000000a20 R11: 0000000000034320 R12: 0000000000000000
R13: ffff888103580a18 R14: ffff888114447000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88881fdc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000094 CR3: 0000000100cdb000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
bfq_bic_update_cgroup+0x3c/0x350
? ioc_create_icq+0x42/0x270
bfq_init_rq+0xfd/0x1060
bfq_insert_requests+0x20f/0x1cc0
? ioc_create_icq+0x122/0x270
blk_mq_sched_insert_requests+0x86/0x1d0
blk_mq_flush_plug_list+0x193/0x2a0
blk_flush_plug_list+0x127/0x170
blk_finish_plug+0x31/0x50
blk_throtl_dispatch_work_fn+0x151/0x190
process_one_work+0x27c/0x5f0
worker_thread+0x28b/0x6b0
? rescuer_thread+0x590/0x590
kthread+0x153/0x1b0
? kthread_flush_work+0x170/0x170
ret_from_fork+0x1f/0x30
Modules linked in:
CR2: 0000000000000094
---[ end trace e2e59ac014314547 ]---
RIP: 0010:bfq_bio_bfqg+0x52/0xc0
Code: 94 00 00 00 00 75 2e 48 8b 40 30 48 83 05 35 06 c8 0b 01 48 85 c0 74 3d 4b
RSP: 0018:ffffc90001a1fba0 EFLAGS: 00010002
RAX: ffff888100d60400 RBX: ffff8881132e7000 RCX: 0000000000000000
RDX: 0000000000000017 RSI: ffff888103580a18 RDI: ffff888103580a18
RBP: ffff8881132e7000 R08: 0000000000000000 R09: ffffc90001a1fe10
R10: 0000000000000a20 R11: 0000000000034320 R12: 0000000000000000
R13: ffff888103580a18 R14: ffff888114447000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88881fdc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000094 CR3: 0000000100cdb000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Root cause is quite complex:
1) use bfq elevator for the test device.
2) create a cgroup CG
3) config blk throtl in CG
blkg_conf_prep
blkg_create
4) create a thread T1 and issue async io in CG:
bio_init
bio_associate_blkg
...
submit_bio
submit_bio_noacct
blk_throtl_bio -> io is throttled
// io submit is done
5) switch elevator:
bfq_exit_queue
blkcg_deactivate_policy
list_for_each_entry(blkg, &q->blkg_list, q_node)
blkg->pd[] = NULL
// bfq policy is removed
5) thread t1 exist, then remove the cgroup CG:
blkcg_unpin_online
blkcg_destroy_blkgs
blkg_destroy
list_del_init(&blkg->q_node)
// blkg is removed from queue list
6) switch elevator back to bfq
bfq_init_queue
bfq_create_group_hierarchy
blkcg_activate_policy
list_for_each_entry_reverse(blkg, &q->blkg_list)
// blkg is removed from list, hence bfq policy is still NULL
7) throttled io is dispatched to bfq:
bfq_insert_requests
bfq_init_rq
bfq_bic_update_cgroup
bfq_bio_bfqg
bfqg = blkg_to_bfqg(blkg)
// bfqg is NULL because bfq policy is NULL
The problem is only possible in bfq because only bfq can be deactivated and
activated while queue is online, while others can only be deactivated while
the device is removed.
Fix the problem in bfq by checking if blkg is online before calling
blkg_to_bfqg().
Signed-off-by: Yu Kuai <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
M-Audio Micro (0762:201a) defines the descriptor as vendor-specific,
while the content seems class-compliant. Just overriding the probe
makes the device working.
Reported-by: Ash Logan <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Because the value of man->size is changed during suspend/resume process,
use mgr->mm.size instead of man->size here for lpfn checking.
Signed-off-by: Ma Jun <[email protected]>
Suggested-by: Christian König <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Christian König <[email protected]>
|
|
Current way of checking available SQE count which is based on
HW updated SQB count could result in driver submitting an SQE
even before CQE for the previously transmitted SQE at the same
index is processed in NAPI resulting losing SKB pointers,
hence a leak. Fix this by checking a consumer index which
is updated once CQE is processed.
Fixes: 3ca6c4c882a7 ("octeontx2-pf: Add packet transmission support")
Signed-off-by: Ratheesh Kannoth <[email protected]>
Reviewed-by: Sunil Kovvuri Goutham <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
in mtk_star_enable()
When failed to connect to and start PHY in mtk_star_enable() for opening
device, napi isn't disabled. When open mtk star device next time, it will
reports a invalid opcode issue. Fix it. Only be compiled, not be tested.
Fixes: 8c7bd5a454ff ("net: ethernet: mtk-star-emac: new driver")
Signed-off-by: Zhengchao Shao <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
If lapb_register() failed when lapb device goes to up for the first time,
the NAPI is not disabled. As a result, the invalid opcode issue is
reported when the lapb device goes to up for the second time.
The stack info is as follows:
[ 1958.311422][T11356] kernel BUG at net/core/dev.c:6442!
[ 1958.312206][T11356] invalid opcode: 0000 [#1] PREEMPT SMP KASAN
[ 1958.315979][T11356] RIP: 0010:napi_enable+0x16a/0x1f0
[ 1958.332310][T11356] Call Trace:
[ 1958.332817][T11356] <TASK>
[ 1958.336135][T11356] lapbeth_open+0x18/0x90
[ 1958.337446][T11356] __dev_open+0x258/0x490
[ 1958.341672][T11356] __dev_change_flags+0x4d4/0x6a0
[ 1958.345325][T11356] dev_change_flags+0x93/0x160
[ 1958.346027][T11356] devinet_ioctl+0x1276/0x1bf0
[ 1958.346738][T11356] inet_ioctl+0x1c8/0x2d0
[ 1958.349638][T11356] sock_ioctl+0x5d1/0x750
[ 1958.356059][T11356] __x64_sys_ioctl+0x3ec/0x1790
[ 1958.365594][T11356] do_syscall_64+0x35/0x80
[ 1958.366239][T11356] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 1958.377381][T11356] </TASK>
Fixes: 514e1150da9c ("net: x25: Queue received packets in the drivers instead of per-CPU queues")
Signed-off-by: Zhengchao Shao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
We are able to power down the GPU and audio via the GPU driver
so flag these asics as supporting runtime pm.
Signed-off-by: Evan Quan <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Like the Acer Switch One 10 S1003, for which there already is a quirk,
the Acer Switch V 10 (SW5-017) has a 800x1280 portrait screen mounted
in the tablet part of a landscape oriented 2-in-1. Add a quirk for this.
Cc: Rudolf Polzer <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Acked-by: Simon Ser <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The Nanote UMPC-01 is a mini laptop with a 1200x1920 portrait screen
mounted in a landscape oriented clamshell case. Add a quirk for this.
Signed-off-by: Hans de Goede <[email protected]>
Acked-by: Simon Ser <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The recent fix for the delayed card registration made the current
workaround for QUIRK_AUTODETECT superfluous, since the card
registration itself is delayed until the last interface probe.
This patch drops the redundant workaround in
create_autodetect_quirks() for simplification.
Fixes: 39efc9c8a973 ("ALSA: usb-audio: Fix last interface check for registration")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1205111
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Although we tried to fix the regression for the recent changes with
the delayed card registration, it doesn't seem covering the all
cases; e.g. on Roland EDIROL M-100FX, where the generic quirk for
Roland devices is applied, it misses the card registration because the
detection of the last interface (apparently for MIDI) fails.
This patch is an attempt to recover from those failures by calling the
card register also at the error path for the secondary interfaces.
The card register condition is also extended to match with the old
check in the previous patch, too (i.e. the simple check of the
interface number) for catching the probe with errors.
Fixes: 39efc9c8a973 ("ALSA: usb-audio: Fix last interface check for registration")
Cc: <[email protected]>
Link: https://bugzilla.suse.com/show_bug.cgi?id=1205111
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
SAT SCSI/ATA Translation specification requires SCSI SYNCHRONIZE CACHE
(10) and (16) commands both shall be translated to ATA flush command.
Also, ZBC Zoned Block Commands specification mandates SYNCHRONIZE CACHE
(16) command support. However, libata translates only SYNCHRONIZE CACHE
(10). This results in SYNCHRONIZE CACHE (16) command failures on SATA
drives and then libata translation does not conform to ZBC. To avoid the
failure, add support for SYNCHRONIZE CACHE (16).
Signed-off-by: Shin'ichiro Kawasaki <[email protected]>
Cc: [email protected]
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Martin K. Petersen <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
|
|
dma_async_device_register() can fail, check the return code and display an
error.
Fixes: dc78baa2b90b ("dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller")
Signed-off-by: Tudor Ambarus <[email protected]>
Cc: [email protected]
Acked-by: Nicolas Ferre <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
The iterator can not be greater than ATC_MAX_DSCR_TRIALS, as the for loop
will stop when i == ATC_MAX_DSCR_TRIALS. While here, use the common "i"
name for the iterator.
Fixes: 93dce3a6434f ("dmaengine: at_hdmac: fix residue computation")
Signed-off-by: Tudor Ambarus <[email protected]>
Cc: [email protected]
Acked-by: Nicolas Ferre <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
at_hdmac uses __raw_writel for register writes. In the absence of a
barrier, the CPU may reorder the register operations.
Introduce a write memory barrier so that the CPU does not reorder the
channel enable, thus the start of the transfer, without making sure that
all the pre-required register fields are already written.
Fixes: dc78baa2b90b ("dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller")
Reported-by: Peter Rosin <[email protected]>
Signed-off-by: Tudor Ambarus <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/lkml/[email protected]/
Acked-by: Nicolas Ferre <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
In case the controller detected an error, the code took the chance to move
all the queued (submitted) descriptors to the active (issued) list. This
was wrong as if there were any descriptors in the submitted list they were
moved to the issued list without actually issuing them to the controller,
thus a completion could be raised without even fireing the descriptor.
Fixes: dc78baa2b90b ("dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller")
Reported-by: Peter Rosin <[email protected]>
Signed-off-by: Tudor Ambarus <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/lkml/[email protected]/
Acked-by: Nicolas Ferre <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
As it was before, the descriptor was issued to the hardware without adding
it to the active (issued) list. This could result in a completion of other
descriptor, or/and in the descriptor never being completed.
Fixes: dc78baa2b90b ("dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller")
Reported-by: Peter Rosin <[email protected]>
Signed-off-by: Tudor Ambarus <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/lkml/[email protected]/
Acked-by: Nicolas Ferre <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
The tasklet (atc_advance_work()) did not held the channel lock when
retrieving the first active descriptor, causing concurrency problems if
issue_pending() was called in between. If issue_pending() was called
exactly after the lock was released in the tasklet (atc_advance_work()),
atc_chain_complete() could complete a descriptor for which the controller
has not yet raised an interrupt.
Fixes: dc78baa2b90b ("dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller")
Reported-by: Peter Rosin <[email protected]>
Signed-off-by: Tudor Ambarus <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/lkml/[email protected]/
Acked-by: Nicolas Ferre <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
There's no need to hold the channel lock when freeing the memset buf, as
the operation has already completed. Free the memset buf without holding
the channel lock.
Fixes: 4d112426c344 ("dmaengine: hdmac: Add memset capabilities")
Signed-off-by: Tudor Ambarus <[email protected]>
Cc: [email protected]
Acked-by: Nicolas Ferre <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
The descriptor was added to the free_list before calling the callback,
which could result in reissuing of the same descriptor and calling of a
single callback for both. Move the decriptor to the free list after the
callback is invoked.
Fixes: dc78baa2b90b ("dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller")
Reported-by: Peter Rosin <[email protected]>
Signed-off-by: Tudor Ambarus <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/lkml/[email protected]/
Acked-by: Nicolas Ferre <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
atc_complete_all() had concurrency bugs, thus remove it:
1/ atc_complete_all() in its entirety was buggy, as when the atchan->queue
list (the one that contains descriptors that are not yet issued to the
hardware) contained descriptors, it fired just the first from the
atchan->queue, but moved all the desc from atchan->queue to
atchan->active_list and considered them all as fired. This could result in
calling the completion of a descriptor that was not yet issued to the
hardware.
2/ when in tasklet at atc_advance_work() time, atchan->active_list was
queried without holding the lock of the chan. This can result in
atchan->active_list concurrency problems between the tasklet and
issue_pending().
Fixes: dc78baa2b90b ("dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller")
Reported-by: Peter Rosin <[email protected]>
Signed-off-by: Tudor Ambarus <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/lkml/[email protected]/
Acked-by: Nicolas Ferre <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
Now that the complete callback call was removed from
device_terminate_all(), we can protect the atchan->status with the channel
lock. The atomic bitops on atchan->status do not substitute proper locking
on the status, as one could still modify the status after the lock was
dropped in atc_terminate_all() but before the atomic bitops were executed.
Fixes: 078a6506141a ("dmaengine: at_hdmac: Fix deadlocks")
Reported-by: Peter Rosin <[email protected]>
Signed-off-by: Tudor Ambarus <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/lkml/[email protected]/
Acked-by: Nicolas Ferre <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
The method was wrong because it violated the dmaengine API. For aborted
transfers the complete callback should not be called. Fix the behavior and
do not call the complete callback on device_terminate_all.
Fixes: 808347f6a317 ("dmaengine: at_hdmac: add DMA slave transfers")
Reported-by: Peter Rosin <[email protected]>
Signed-off-by: Tudor Ambarus <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/lkml/[email protected]/
Acked-by: Nicolas Ferre <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
Multiple calls to atc_issue_pending() could result in a premature
completion of a descriptor from the atchan->active list, as the method
always completed the first active descriptor from the list. Instead,
issue_pending() should just take the first transaction descriptor from the
pending queue, move it to active_list and start the transfer.
Fixes: dc78baa2b90b ("dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller")
Reported-by: Peter Rosin <[email protected]>
Signed-off-by: Tudor Ambarus <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/lkml/[email protected]/
Acked-by: Nicolas Ferre <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
Cyclic channels must too call issue_pending in order to start a transfer.
Start the transfer in issue_pending regardless of the type of channel.
This wrongly worked before, because in the past the transfer was started
at tx_submit level when only a desc in the transfer list.
Fixes: 53830cc75974 ("dmaengine: at_hdmac: add cyclic DMA operation support")
Reported-by: Peter Rosin <[email protected]>
Signed-off-by: Tudor Ambarus <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/lkml/[email protected]/
Acked-by: Nicolas Ferre <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|