aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-07-16ARM: dts: qcom: ipq8064: fix and add some missing gsbi nodeChristian Marangi1-1/+53
Add some tag for gsbi to make them usable for ipq8064 SoC. Add missing gsbi7 i2c node and gsbi1 node. Signed-off-by: Christian Marangi <[email protected]> Tested-by: Jonathan McDowell <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-16ARM: dts: qcom: ipq8064: reduce pci IO size to 64KChristian Marangi1-3/+3
The current value for pci IO is problematic for ath10k wifi card commonly connected to ipq8064 SoC. The current value is probably a typo and is actually uncommon to find 1MB IO space even on a x86 arch. Also with recent changes to the pci driver, pci1 and pci2 now fails to function as any connected device fails any reg read/write. Reduce this to 64K as it should be more than enough and 3 * 64K of total IO space doesn't exceed the IO_SPACE_LIMIT hardcoded for the ARM arch. Signed-off-by: Christian Marangi <[email protected]> Tested-by: Jonathan McDowell <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-16ARM: dts: qcom: ipq8064: disable usb phy by defaultChristian Marangi1-0/+4
Disable usb phy by default. When the usb phy were pushed, half of them were flagged as disabled by mistake. Correctly disable all usb phy and enable them only if a device actually use them. Signed-off-by: Christian Marangi <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-16ARM: dts: qcom: ipq8064: add missing snps,dwmac compatible for gmacChristian Marangi1-4/+4
Add missing snps,dwmac compatible for gmac ipq8064 dtsi. Signed-off-by: Christian Marangi <[email protected]> Tested-by: Jonathan McDowell <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-16ARM: dts: qcom: ipq8064: add specific dtsi with smb208 rpm regulatorsChristian Marangi1-0/+37
Add specific ipq8064 dtsi with smb208 rpm regulators. Qcom advise to use this configuration but it's not mandatory and OEM can decide to implement their own regulators. smb208 regulators are used to scale CPU voltage, L2 cache voltage and Ubi32 cores. There regulators are controlled by rpm and to correctly works gsbi4-i2c require to be NEVER disabled or rpm will reject any regulator change request. Signed-off-by: Christian Marangi <[email protected]> Tested-by: Jonathan McDowell <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-16ARM: dts: qcom: ipq8064: add gsbi6 missing definitionChristian Marangi1-0/+43
Add gsbi6 missing definition for ipq8064. Signed-off-by: Christian Marangi <[email protected]> Tested-by: Jonathan McDowell <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-16ARM: dts: qcom: ipq8064: add multiple missing pin definitionChristian Marangi3-15/+32
Add missing definition for mdio0 pins used for gpio-bitbang driver,i2c4 pins and rgmii2 pins for ipq8064. Drop i2c4_pins node from ipq8064-ap148 dts as it's now moved to ipq8064 dtsi. Drop mdio0_pins node from ipq8064-rb3011 dts as it's now moved to ipq8064 dtsi. Signed-off-by: Christian Marangi <[email protected]> Tested-by: Jonathan McDowell <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-16ARM: dts: qcom: msm8974-hammerhead: Add notification LEDAndré Almeida1-0/+30
Nexus 5 has a RGB LED connected to the TRILED and hence channels 7, 6 and 5 of the LPG. Add a node describing this. Signed-off-by: Luca Weiss <[email protected]> Signed-off-by: André Almeida <[email protected]> Reported-by: kernel test robot <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-16ARM: dts: qcom: msm8974-FP2: Add notification LEDLuca Weiss1-0/+30
FP2 has a RGB LED connected to the TRILED and hence channels 7, 6 and 5 of the LPG. Add a node describing this. Signed-off-by: Luca Weiss <[email protected]> Reported-by: kernel test robot <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-16ARM: dts: qcom: msm8974-sony: Enable LPGBjorn Andersson2-0/+60
Both Castor and Honami has RGB LEDs driven by the PM8941 LPG, define these. Signed-off-by: Bjorn Andersson <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-16ARM: dts: qcom: Add LPG node to pm8941Bjorn Andersson1-0/+10
The PM8941 contains 8 LPG channels, as well as TRILED and LUT blocks. Add a node for these. Signed-off-by: Bjorn Andersson <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-16ARM: dts: qcom: sdx65: reorder USB interruptsJohan Hovold1-4/+6
Three SoCs did not follow the interrupt order specified by the USB controller binding. While keeping the non-SuperSpeed interrupts together seems natural, reorder the interrupts to match the binding. Acked-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Johan Hovold <[email protected]> [bjorn: Split out from arm64 patch] Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-13ARM: dts: qcom: apq8064: create tsens device nodeDmitry Baryshkov1-8/+17
Create separate device node for thermal sensors on apq8064 platform. Move related properties to the newly created device tree node. This harmonizes apq8064 and ipq8064 device trees and allows gcc device to be probed earlier by removing dependency on QFPROM nodes. Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-06ARM: dts: qcom: msm8974: rename GPU's OPP table nodeDmitry Baryshkov1-1/+1
Rename the GPU's opp table node to make it follow the display/msm/gpu.yaml schema. Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-06ARM: dts: qcom: apq8064: disable DSI and DSI PHY by defaultDmitry Baryshkov1-0/+3
Disable DSI and DSI PHY devices by default. The only actual user, Nexus 7, already contains `status = "okay"` property in the respective devices nodes. Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-06ARM: dts: qcom: apq8064: rename DSI PHY iface clockDmitry Baryshkov1-1/+1
Follow the usual scheme and use name 'iface' rather than 'iface_clk' for the interface clock. The DSI PHY driver can cope with both of them, so there is no breakage. Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-06ARM: dts: qcom: extend scm compatible to match dt-schemaDavid Heidelberg4-4/+4
First device specific compatible, then general one. Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: David Heidelberg <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02ARM: dts: qcom: Fix sdhci node names - use 'mmc@'Bhupesh Sharma6-11/+11
Since the Qualcomm sdhci-msm device-tree binding has been converted to yaml format, 'make dtbs_check' reports issues with inconsistent 'sdhci@' convention used for specifying the sdhci nodes. The generic mmc bindings expect 'mmc@' format instead. Fix the same. Cc: Bjorn Andersson <[email protected]> Cc: Rob Herring <[email protected]> Signed-off-by: Bhupesh Sharma <[email protected]> [bjorn: Extracted from combined arm64 patch] Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-30ARM: dts: qcom: apq8064: drop phy-names from HDMI device nodeDmitry Baryshkov1-1/+0
The HDMI driver doesn't use the phy-names to identify the PHY. Different Qualcomm platforms have used different names for the PHY. So, we are deprecating phy-names propertty of the HDMI device and dropping them from existing DTs. Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-30ARM: dts: qcom: apq8064-ifc6410: drop hdmi-mux-supplyDmitry Baryshkov1-1/+0
The HDMI circuitry on the IFC6410 is not powered by the 3v3. Drop the hdmi-mux-supply property. Reviewed-by: Stephen Boyd <[email protected]> Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-30ARM: dts: qcom: pm8841: add required thermal-sensor-cellsKrzysztof Kozlowski1-0/+1
The PM8841 temperature sensor has to define thermal-sensor-cells. Fixes: dab8134ca072 ("ARM: dts: qcom: Add PM8841 functions device nodes") Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-30ARM: dts: qcom: msm8974: add required ranges to OCMEMKrzysztof Kozlowski1-0/+1
The OCMEM bindings require ranges property. Fixes: a2cc991ed634 ("ARM: dts: qcom: msm8974: add ocmem node") Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Luca Weiss <[email protected]> Tested-by: Luca Weiss <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-30ARM: dts: qcom: sdx55: add dedicated IMEM and syscon compatiblesKrzysztof Kozlowski1-1/+1
Add proper compatibles to the IMEM device node: 1. syscon to allow accessing memory from other devices, 2. dedicated compatible as required for syscon and simple-mfd nodes. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-30ARM: dts: qcom: msm8974: add dedicated IMEM compatibleKrzysztof Kozlowski1-1/+1
syscon compatible must be preceded with a specific compatible, to accurately describe the device. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Luca Weiss <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-30ARM: dts: qcom: apq8064-asus-nexus7: add dedicated IMEM compatibleKrzysztof Kozlowski1-1/+1
syscon compatible must be preceded with a specific compatible, to accurately describe the device. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-30ARM: dts: qcom: use generic sram as name for imem and ocmem nodesKrzysztof Kozlowski3-4/+4
According to Devicetree specification, the device nodes should be generic, reflecting the function of the device. The typical name for memory regions is "sram". Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Luca Weiss <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-30ARM: dts: qcom: ipq8064: add function to LED nodesKrzysztof Kozlowski1-0/+3
Add common LED property - the function - to LED nodes. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-30ARM: dts: qcom: ipq8064-rb3011: add color to LED nodeKrzysztof Kozlowski1-0/+2
Add common LED property - the color - to LED node. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-30ARM: dts: qcom: ipq4018-ap120c-ac: add function and color to LED nodesKrzysztof Kozlowski2-0/+13
Add common LED properties - the function and color - to LED nodes. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-30ARM: dts: qcom: apq8060-ifc6410: add color to LED nodeKrzysztof Kozlowski1-0/+2
Add common LED property - the color - to LED node. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-30ARM: dts: qcom: apq8060-dragonboard: add function and color to LED nodesKrzysztof Kozlowski1-0/+5
Add common LED properties - the function and color - to LED nodes. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-30ARM: dts: qcom: sdx55: Fix the IRQ trigger type for UARTManivannan Sadhasivam1-1/+1
The trigger type should be LEVEL_HIGH. So fix it! Signed-off-by: Manivannan Sadhasivam <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-30ARM: dts: qcom-msm8974: fix irq type on blsp2_uart1Luca Weiss1-1/+1
IRQ_TYPE_NONE is invalid, so use the correct interrupt type. Signed-off-by: Luca Weiss <[email protected]> Fixes: b05f82b152c9 ("ARM: dts: qcom: msm8974: Add blsp2_uart7 for bluetooth on sirius") Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-30ARM: dts: qcom: msm8974: Add BAM DMUX Ethernet/IP deviceLuca Weiss1-0/+26
BAM DMUX is used as the network interface to the modem. Signed-off-by: Luca Weiss <[email protected]> Reviewed-by: Stephan Gerhold <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-29ARM: dts: qcom: align gpio-key node names with dtschemaKrzysztof Kozlowski10-28/+28
The node names should be generic and DT schema expects certain pattern (e.g. with key/button/switch). Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-29ARM: dts: qcom: adjust whitespace around '='Krzysztof Kozlowski9-196/+196
Fix whitespace coding style: use single space instead of tabs or multiple spaces around '=' sign in property assignment. No functional changes (same DTB). Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-29ARM: dts: qcom: ipq4019: fix Micron SPI NOR compatibleKrzysztof Kozlowski2-2/+2
The proper compatible for Micron n25q128a11 SPI NOR flash should include vendor-prefix and use jedec,spi-nor fallback. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-29ARM: dts: qcom: apq8064: add unit addresses to QFPROM regionsKrzysztof Kozlowski1-2/+2
QFPROM children have 'reg' so they must have unit address. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-29ARM: dts: qcom: cleanup QFPROM nodesKrzysztof Kozlowski3-7/+7
Cleanup coding style of QFPROM nodes - put compatible as first property and drop tabs before '=' character. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-29ARM: dts: qcom: use dedicated QFPROM compatiblesKrzysztof Kozlowski4-4/+4
Use dedicated compatibles for QFPROM on APQ8064, IPQ8064 and MSM9874, which is expected by the bindings. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-29ARM: dts: qcom: replace gcc PXO with pxo_board fixed clockAnsuel Smith1-1/+1
Replace gcc PXO phandle to pxo_board fixed clock declared in the dts. gcc driver doesn't provide PXO_SRC as it's a fixed-clock. This cause a kernel panic if any driver actually try to use it. Fixes: 40cf5c884a96 ("ARM: dts: qcom: add L2CC and RPM for IPQ8064") Signed-off-by: Ansuel Smith <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-27ARM: dts: qcom: add missing gpio-ranges in PMIC GPIOsKrzysztof Kozlowski2-0/+2
The new Qualcomm PMIC GPIO bindings require gpio-ranges property: qcom-sdx55-telit-fn980-tlb.dtb: gpio@c000: 'gpio-ranges' is a required property Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-27ARM: dts: qcom: pmx65: add fallback compatible to PMIC GPIOKrzysztof Kozlowski1-1/+1
The bindings require all PMIC GPIO nodes to have two compatibles - specific followed by SPMI or SSBI fallback. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-27ARM: dts: qcom: mdm9615: add missing PMIC GPIO regKrzysztof Kozlowski1-0/+1
'reg' property is required in SSBI children: qcom-mdm9615-wp8548-mangoh-green.dtb: gpio@150: 'reg' is a required property Fixes: 2c5e596524e7 ("ARM: dts: Add MDM9615 dtsi") Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-27ARM: dts: qcom: align PMIC GPIO pin configuration with DT schemaKrzysztof Kozlowski11-37/+37
DT schema expects PMIC GPIO pin configuration nodes to be named with '-state' suffix. Optional children should be either 'pinconf' or followed with '-pins' suffix. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-27ARM: dts: qcom: sdx65: Add Watchdog supportRohit Agarwal1-0/+6
Enable Watchdog support for Application Processor Subsystem (APSS) block on SDX65 platform. Signed-off-by: Rohit Agarwal <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-27ARM: dts: qcom: sdx65: Add pshold supportRohit Agarwal1-0/+5
Add support for pshold block to drive pshold towards the PMIC, which is used to trigger a configurable event such as reboot or poweroff of the SDX65 platform. Signed-off-by: Rohit Agarwal <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-27ARM: dts: qcom: sdx65-mtp: Enable modemRohit Agarwal1-0/+5
Enable modem on SDX65 MTP board. Signed-off-by: Rohit Agarwal <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-27ARM: dts: qcom: sdx65: Add Modem remoteproc nodeRohit Agarwal1-0/+33
Add modem support to SDX65 using the PAS remoteproc driver. Signed-off-by: Rohit Agarwal <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-27ARM: dts: qcom: sdx65: Add SCM nodeRohit Agarwal1-0/+6
Add SCM node to enable SCM functionality on SDX65 platform. Signed-off-by: Rohit Agarwal <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.