| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This mm_struct pointer should never be dereferenced. If running in
a user thread, just use current->mm. If running in a kernel worker
use get_task_mm to get a safe reference to the mm_struct.
Reviewed-by: Oded Gabbay <[email protected]>
Acked-by: Christian König <[email protected]>
Signed-off-by: Felix Kuehling <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
i.MX fixes for 4.19, round 2:
- i.MX53 QSB board stops working when cpufreq driver is enabled,
because the default OPP table has the maximum CPU frequency at
1.2GHz, while the board is only capable of running 1GHz. Fix up
the OPP table for the board to get it work with cpufreq driver.
* tag 'imx-fixes-4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx53-qsb: disable 1.2GHz OPP
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
In amdgpu_dm_commit_tail(), wait until flip_done() is signaled before
we signal hw_done().
[Why]
This is to temporarily address a paging error that occurs when a
nonblocking commit contends with another commit, particularly in a
mirrored display configuration where at least 2 CRTCs are updated.
The error occurs in drm_atomic_helper_wait_for_flip_done(), when we
attempt to access the contents of new_crtc_state->commit.
Here's the sequence for a mirrored 2 display setup (irrelevant steps
left out for clarity):
**THREAD 1** | **THREAD 2**
|
Initialize atomic state for flip |
|
Queue worker |
...
| Do work for flip
|
| Signal hw_done() on CRTC 1
| Signal hw_done() on CRTC 2
|
| Wait for flip_done() on CRTC 1
<---- **PREEMPTED BY THREAD 1**
Initialize atomic state for cursor |
update (1) |
|
Do cursor update work on both CRTCs |
|
Clear atomic state (2) |
**DONE** |
...
|
| Wait for flip_done() on CRTC 2
| *ERROR*
|
The issue starts with (1). When the atomic state is initialized, the
current CRTC states are duplicated to be the new_crtc_states, and
referenced to be the old_crtc_states. (The new_crtc_states are to be
filled with update data.)
Some things to note:
* Due to the mirrored configuration, the cursor updates on both CRTCs.
* At this point, the pflip IRQ has already been handled, and flip_done
signaled on all CRTCs. The cursor commit can therefore continue.
* The old_crtc_states used by the cursor update are the **same states**
as the new_crtc_states used by the flip worker.
At (2), the old_crtc_state is freed (*), and the cursor commit
completes. We then context switch back to the flip worker, where we
attempt to access the new_crtc_state->commit object. This is
problematic, as this state has already been freed.
(*) Technically, 'state->crtcs[i].state' is freed, which was made to
reference old_crtc_state in drm_atomic_helper_swap_state()
[How]
By moving hw_done() after wait_for_flip_done(), we're guaranteed that
the new_crtc_state (from the flip worker's perspective) still exists.
This is because any other commit will be blocked, waiting for the
hw_done() signal.
Note that both the i915 and imx drivers have this sequence flipped
already, masking this problem.
Signed-off-by: Shirish S <[email protected]>
Signed-off-by: Leo Li <[email protected]>
Reviewed-by: Harry Wentland <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Commit b5861e5cf2fcf83031ea3e26b0a69d887adf7d21 introduced a check on
the interrupt-window and NMI-window CPU execution controls in order to
inject an external interrupt vmexit before the first guest instruction
executes. However, when APIC virtualization is enabled the host does not
need a vmexit in order to inject an interrupt at the next interrupt window;
instead, it just places the interrupt vector in RVI and the processor will
inject it as soon as possible. Therefore, on machines with APICv it is
not enough to check the CPU execution controls: the same scenario can also
happen if RVI>vPPR.
Fixes: b5861e5cf2fcf83031ea3e26b0a69d887adf7d21
Reviewed-by: Nikita Leshchenko <[email protected]>
Cc: Sean Christopherson <[email protected]>
Cc: Liran Alon <[email protected]>
Cc: Radim Krčmář <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Format has a typo: it was meant to be "%.*s", not "%*s". But at some point
callers grew nonprintable values as well, so use "%*pE" instead with a
maximized length.
Reported-by: Amir Goldstein <[email protected]>
Signed-off-by: Miklos Szeredi <[email protected]>
Fixes: 3a1e819b4e80 ("ovl: store file handle of lower inode on copy up")
Cc: <[email protected]> # v4.12
|
|
KASAN detected slab-out-of-bounds access in printk from overlayfs,
because string format used %*s instead of %.*s.
> BUG: KASAN: slab-out-of-bounds in string+0x298/0x2d0 lib/vsprintf.c:604
> Read of size 1 at addr ffff8801c36c66ba by task syz-executor2/27811
>
> CPU: 0 PID: 27811 Comm: syz-executor2 Not tainted 4.19.0-rc5+ #36
...
> printk+0xa7/0xcf kernel/printk/printk.c:1996
> ovl_lookup_index.cold.15+0xe8/0x1f8 fs/overlayfs/namei.c:689
Reported-by: [email protected]
Signed-off-by: Amir Goldstein <[email protected]>
Signed-off-by: Miklos Szeredi <[email protected]>
Fixes: 359f392ca53e ("ovl: lookup index entry for copy up origin")
Cc: <[email protected]> # v4.13
|
|
As of commit 8d860bbeedef ("kvm: vmx: Basic APIC virtualization controls
have three settings"), KVM will disable VIRTUALIZE_APIC_ACCESSES when
a nested guest writes APIC_BASE MSR and kvm-intel.flexpriority=0,
whereas previously KVM would allow a nested guest to enable
VIRTUALIZE_APIC_ACCESSES so long as it's supported in hardware. That is,
KVM now advertises VIRTUALIZE_APIC_ACCESSES to a guest but doesn't
(always) allow setting it when kvm-intel.flexpriority=0, and may even
initially allow the control and then clear it when the nested guest
writes APIC_BASE MSR, which is decidedly odd even if it doesn't cause
functional issues.
Hide the control completely when the module parameter is cleared.
reported-by: Sean Christopherson <[email protected]>
Fixes: 8d860bbeedef ("kvm: vmx: Basic APIC virtualization controls have three settings")
Cc: Jim Mattson <[email protected]>
Cc: [email protected]
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Return early from vmx_set_virtual_apic_mode() if the processor doesn't
support VIRTUALIZE_APIC_ACCESSES or VIRTUALIZE_X2APIC_MODE, both of
which reside in SECONDARY_VM_EXEC_CONTROL. This eliminates warnings
due to VMWRITEs to SECONDARY_VM_EXEC_CONTROL (VMCS field 401e) failing
on processors without secondary exec controls.
Remove the similar check for TPR shadowing as it is incorporated in the
flexpriority_enabled check and the APIC-related code in
vmx_update_msr_bitmap() is further gated by VIRTUALIZE_X2APIC_MODE.
Reported-by: Gerhard Wiesinger <[email protected]>
Fixes: 8d860bbeedef ("kvm: vmx: Basic APIC virtualization controls have three settings")
Cc: Jim Mattson <[email protected]>
Cc: [email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
When I added the missing memory outputs, I failed to update the
index of the first argument (ebx) on 32-bit builds, which broke the
fallbacks. Somehow I must have screwed up my testing or gotten
lucky.
Add another test to cover gettimeofday() as well.
Signed-off-by: Andy Lutomirski <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Fixes: 715bd9d12f84 ("x86/vdso: Fix asm constraints on vDSO syscall fallbacks")
Link: http://lkml.kernel.org/r/21bd45ab04b6d838278fa5bebfa9163eceffa13c.1538608971.git.luto@kernel.org
Signed-off-by: Ingo Molnar <[email protected]>
|
|
The issue is the same as commit dd9aa335c880 ("ALSA: hda/realtek - Can't
adjust speaker's volume on a Dell AIO"), the output requires to connect
to a node with Amp-out capability.
Applying the same fixup ALC298_FIXUP_SPK_VOLUME can fix the issue.
BugLink: https://bugs.launchpad.net/bugs/1775068
Signed-off-by: Kai-Heng Feng <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
|
|
net/core/flow.c does not exist anymore, so remove it
from the IPSEC NETWORKING section of the MAINTAINERS
file.
Signed-off-by: Steffen Klassert <[email protected]>
|
|
Commit 71d29f43b633 ("KVM: PPC: Book3S HV: Don't use compound_order to
determine host mapping size", 2018-09-11) added a call to
__find_linux_pte() and a dereference of the returned PTE pointer to the
radix page fault path in the common case where the page is normal
system memory. Previously, __find_linux_pte() was only called for
mappings to physical addresses which don't have a page struct (e.g.
memory-mapped I/O) or where the page struct is marked as reserved
memory.
This exposes us to the possibility that the returned PTE pointer
could be NULL, for example in the case of a concurrent THP collapse
operation. Dereferencing the returned NULL pointer causes a host
crash.
To fix this, we check for NULL, and if it is NULL, we retry the
operation by returning to the guest, with the expectation that it
will generate the same page fault again (unless of course it has
been fixed up by another CPU in the meantime).
Fixes: 71d29f43b633 ("KVM: PPC: Book3S HV: Don't use compound_order to determine host mapping size")
Signed-off-by: Paul Mackerras <[email protected]>
|
|
into drm-fixes
two tda9950 fixes.
Signed-off-by: Dave Airlie <[email protected]>
From: Russell King <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
There's one fix for our zlib incomlete Z_FINISH on our error state handling,
plus a compilation warning fix and a tiny code clean up.
Signed-off-by: Dave Airlie <[email protected]>
From: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
David writes:
"Networking fixes:
1) Prefix length validation in xfrm layer, from Steffen Klassert.
2) TX status reporting fix in mac80211, from Andrei Otcheretianski.
3) Fix hangs due to TX_DROP in mac80211, from Bob Copeland.
4) Fix DMA error regression in b43, from Larry Finger.
5) Add input validation to xenvif_set_hash_mapping(), from Jan Beulich.
6) SMMU unmapping fix in hns driver, from Yunsheng Lin.
7) Bluetooh crash in unpairing on SMP, from Matias Karhumaa.
8) WoL handling fixes in the phy layer, from Heiner Kallweit.
9) Fix deadlock in bonding, from Mahesh Bandewar.
10) Fill ttl inherit infor in vxlan driver, from Hangbin Liu.
11) Fix TX timeouts during netpoll, from Michael Chan.
12) RXRPC layer fixes from David Howells.
13) Another batch of ndo_poll_controller() removals to deal with
excessive resource consumption during load. From Eric Dumazet.
14) Fix a specific TIPC failure secnario, from LUU Duc Canh.
15) Really disable clocks in r8169 during suspend so that low
power states can actually be reached.
16) Fix SYN backlog lockdep issue in tcp and dccp, from Eric Dumazet.
17) Fix RCU locking in netpoll SKB send, which shows up in bonding,
from Dave Jones.
18) Fix TX stalls in r8169, from Heiner Kallweit.
19) Fix locksup in nfp due to control message storms, from Jakub
Kicinski.
20) Various rmnet bug fixes from Subash Abhinov Kasiviswanathan and
Sean Tranchetti.
21) Fix use after free in ip_cmsg_recv_dstaddr(), from Eric Dumazet."
* gitolite.kernel.org:/pub/scm/linux/kernel/git/davem/net: (122 commits)
ixgbe: check return value of napi_complete_done()
sctp: fix fall-through annotation
r8169: always autoneg on resume
ipv4: fix use-after-free in ip_cmsg_recv_dstaddr()
net: qualcomm: rmnet: Fix incorrect allocation flag in receive path
net: qualcomm: rmnet: Fix incorrect allocation flag in transmit
net: qualcomm: rmnet: Skip processing loopback packets
net: systemport: Fix wake-up interrupt race during resume
rtnl: limit IFLA_NUM_TX_QUEUES and IFLA_NUM_RX_QUEUES to 4096
bonding: fix warning message
inet: make sure to grab rcu_read_lock before using ireq->ireq_opt
nfp: avoid soft lockups under control message storm
declance: Fix continuation with the adapter identification message
net: fec: fix rare tx timeout
r8169: fix network stalls due to missing bit TXCFG_AUTO_FIFO
tun: napi flags belong to tfile
tun: initialize napi_mutex unconditionally
tun: remove unused parameters
bond: take rcu lock in netpoll_send_skb_on_dev
rtnetlink: Fail dump if target netnsid is invalid
...
|
|
The NIC driver should only enable interrupts when napi_complete_done()
returns true. This patch adds the check for ixgbe.
Cc: [email protected] # 4.10+
Suggested-by: Eric Dumazet <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Shuah writes:
"kselftest fixes for 4.19-rc7
This fixes update for 4.19-rc7 consists one fix to rseq test to
prevent it from seg-faulting when compiled with -fpie."
* tag 'linux-kselftest-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
rseq/selftests: fix parametrized test with -fpie
|
|
Replace "fallthru" with a proper "fall through" annotation.
This fix is part of the ongoing efforts to enabling
-Wimplicit-fallthrough
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The final call to zlib_deflate(Z_FINISH) may require more output
space to be allocated and so needs to re-invoked. Failure to do so in
the current code leads to incomplete zlib streams (albeit intact due to
the use of Z_SYNC_FLUSH) resulting in the occasional short object
capture.
v2: Check against overrunning our pre-allocated page array
v3: Drop Z_SYNC_FLUSH entirely
Testcase: igt/i915-error-capture.js
Fixes: 0a97015d45ee ("drm/i915: Compress GPU objects in error state")
Signed-off-by: Chris Wilson <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: <[email protected]> # v4.10+
Cc: Tvrtko Ursulin <[email protected]>
Reviewed-by: Tvrtko Ursulin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 83bc0f5b432f60394466deef16fc753e27371d0b)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Mauro writes:
"media fixes for v4.19-rc6"
* tag 'media/v4.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: v4l: event: Prevent freeing event subscriptions while accessed
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Jiri writes:
"HID fixes:
- hantick touchpad fix from Anisse Astier
- device ID addition for Ice Lake mobile from Srinivas Pandruvada
- touchscreen resume fix for certain i2c-hid driven devices from Hans
de Goede"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: intel-ish-hid: Enable Ice Lake mobile
HID: i2c-hid: Remove RESEND_REPORT_DESCR quirk and its handling
HID: i2c-hid: disable runtime PM operations on hantick touchpad
|
|
Al writes:
"xattrs regression fix from Andreas; sat in -next for quite a while."
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
sysfs: Do not return POSIX ACL xattrs via listxattr
|
|
The event subscriptions are added to the subscribed event list while
holding a spinlock, but that lock is subsequently released while still
accessing the subscription object. This makes it possible to unsubscribe
the event --- and freeing the subscription object's memory --- while
the subscription object is simultaneously accessed.
Prevent this by adding a mutex to serialise the event subscription and
unsubscription. This also gives a guarantee to the callback ops that the
add op has returned before the del op is called.
This change also results in making the elems field less special:
subscriptions are only added to the event list once they are fully
initialised.
Signed-off-by: Sakari Ailus <[email protected]>
Reviewed-by: Hans Verkuil <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Cc: [email protected] # for 4.14 and up
Fixes: c3b5b0241f62 ("V4L/DVB: V4L: Events: Add backend")
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
If CONFIG_WW_MUTEX_SELFTEST=y is enabled, booting an image
in an arm64 virtual machine results in the following
traceback if 8 CPUs are enabled:
DEBUG_LOCKS_WARN_ON(__owner_task(owner) != current)
WARNING: CPU: 2 PID: 537 at kernel/locking/mutex.c:1033 __mutex_unlock_slowpath+0x1a8/0x2e0
...
Call trace:
__mutex_unlock_slowpath()
ww_mutex_unlock()
test_cycle_work()
process_one_work()
worker_thread()
kthread()
ret_from_fork()
If requesting b_mutex fails with -EDEADLK, the error variable
is reassigned to the return value from calling ww_mutex_lock
on a_mutex again. If this call fails, a_mutex is not locked.
It is, however, unconditionally unlocked subsequently, causing
the reported warning. Fix the problem by using two error variables.
With this change, the selftest still fails as follows:
cyclic deadlock not resolved, ret[7/8] = -35
However, the traceback is gone.
Signed-off-by: Guenter Roeck <[email protected]>
Cc: Chris Wilson <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Will Deacon <[email protected]>
Fixes: d1b42b800e5d0 ("locking/ww_mutex: Add kselftests for resolving ww_mutex cyclic deadlocks")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
Use default iommu domain instead of fake one
- This patch makes it to reuse default IOMMU domain instead of
allocating a fake IOMMU domain, and allows some design changes
for enhancement of IOMMU framework[1] without breaking Exynos DRM.
[1] https://www.spinics.net/lists/arm-kernel/msg676098.html
Signed-off-by: Dave Airlie <[email protected]>
From: Inki Dae <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Clang warns when multiple pairs of parentheses are used for a single
conditional statement.
arch/x86/kernel/cpu/amd.c:925:14: warning: equality comparison with
extraneous parentheses [-Wparentheses-equality]
if ((c->x86 == 6)) {
~~~~~~~^~~~
arch/x86/kernel/cpu/amd.c:925:14: note: remove extraneous parentheses
around the comparison to silence this warning
if ((c->x86 == 6)) {
~ ^ ~
arch/x86/kernel/cpu/amd.c:925:14: note: use '=' to turn this equality
comparison into an assignment
if ((c->x86 == 6)) {
^~
=
1 warning generated.
Signed-off-by: Nathan Chancellor <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Link: https://github.com/ClangBuiltLinux/linux/issues/187
Signed-off-by: Ingo Molnar <[email protected]>
|
|
When I fixed the vDSO build to use inline retpolines, I messed up
the Makefile logic and made it unconditional. It should have
depended on CONFIG_RETPOLINE and on the availability of compiler
support. This broke the build on some older compilers.
Reported-by: [email protected]
Signed-off-by: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: David Woodhouse <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Matt Rickard <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Fixes: 2e549b2ee0e3 ("x86/vdso: Fix vDSO build if a retpoline is emitted")
Link: http://lkml.kernel.org/r/08a1f29f2c238dd1f493945e702a521f8a5aa3ae.1538540801.git.luto@kernel.org
Signed-off-by: Ingo Molnar <[email protected]>
|
|
This affects at least versions 25 and 33, so assume all cards are broken
and just renegotiate by default.
Fixes: 10bc6a6042c9 ("r8169: fix autoneg issue on resume with RTL8168E")
Signed-off-by: Alex Xu (Hello71) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Caching ip_hdr(skb) before a call to pskb_may_pull() is buggy,
do not do it.
Fixes: 2efd4fca703a ("ip: in cmsg IP(V6)_ORIGDSTADDR call pskb_may_pull")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Willem de Bruijn <[email protected]>
Reported-by: syzbot <[email protected]>
Acked-by: Willem de Bruijn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2018-10-01
This pull request includes some fixes to mlx5 driver,
Please pull and let me know if there's any problem.
For -stable v4.11:
"6e0a4a23c59a ('net/mlx5: E-Switch, Fix out of bound access when setting vport rate')"
For -stable v4.18:
"98d6627c372a ('net/mlx5e: Set vlan masks for all offloaded TC rules')"
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Subash Abhinov Kasiviswanathan says:
====================
net: qualcomm: rmnet: Updates 2018-10-02
This series is a set of small fixes for rmnet driver
Patch 1 is a fix for a scenario reported by syzkaller
Patch 2 & 3 are fixes for incorrect allocation flags
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
The incoming skb needs to be reallocated in case the headroom
is not sufficient to adjust the ethernet header. This allocation
needs to be atomic otherwise it results in this splat
[<600601bb>] ___might_sleep+0x185/0x1a3
[<603f6314>] ? _raw_spin_unlock_irqrestore+0x0/0x27
[<60069bb0>] ? __wake_up_common_lock+0x95/0xd1
[<600602b0>] __might_sleep+0xd7/0xe2
[<60065598>] ? enqueue_task_fair+0x112/0x209
[<600eea13>] __kmalloc_track_caller+0x5d/0x124
[<600ee9b6>] ? __kmalloc_track_caller+0x0/0x124
[<602696d5>] __kmalloc_reserve.isra.34+0x30/0x7e
[<603f629b>] ? _raw_spin_lock_irqsave+0x0/0x3d
[<6026b744>] pskb_expand_head+0xbf/0x310
[<6025ca6a>] rmnet_rx_handler+0x7e/0x16b
[<6025c9ec>] ? rmnet_rx_handler+0x0/0x16b
[<6027ad0c>] __netif_receive_skb_core+0x301/0x96f
[<60033c17>] ? set_signals+0x0/0x40
[<6027bbcb>] __netif_receive_skb+0x24/0x8e
Fixes: 74692caf1b0b ("net: qualcomm: rmnet: Process packets over ethernet")
Signed-off-by: Sean Tranchetti <[email protected]>
Signed-off-by: Subash Abhinov Kasiviswanathan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The incoming skb needs to be reallocated in case the headroom
is not sufficient to add the MAP header. This allocation needs to
be atomic otherwise it results in the following splat
[32805.801456] BUG: sleeping function called from invalid context
[32805.841141] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[32805.904773] task: ffffffd7c5f62280 task.stack: ffffff80464a8000
[32805.910851] pc : ___might_sleep+0x180/0x188
[32805.915143] lr : ___might_sleep+0x180/0x188
[32806.131520] Call trace:
[32806.134041] ___might_sleep+0x180/0x188
[32806.137980] __might_sleep+0x50/0x84
[32806.141653] __kmalloc_track_caller+0x80/0x3bc
[32806.146215] __kmalloc_reserve+0x3c/0x88
[32806.150241] pskb_expand_head+0x74/0x288
[32806.154269] rmnet_egress_handler+0xb0/0x1d8
[32806.162239] rmnet_vnd_start_xmit+0xc8/0x13c
[32806.166627] dev_hard_start_xmit+0x148/0x280
[32806.181181] sch_direct_xmit+0xa4/0x198
[32806.185125] __qdisc_run+0x1f8/0x310
[32806.188803] net_tx_action+0x23c/0x26c
[32806.192655] __do_softirq+0x220/0x408
[32806.196420] do_softirq+0x4c/0x70
Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Signed-off-by: Subash Abhinov Kasiviswanathan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
RMNET RX handler was processing invalid packets that were
originally sent on the real device and were looped back via
dev_loopback_xmit(). This was detected using syzkaller.
Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Signed-off-by: Sean Tranchetti <[email protected]>
Signed-off-by: Subash Abhinov Kasiviswanathan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The AON_PM_L2 is normally used to trigger and identify the source of a
wake-up event. Since the RX_SYS clock is no longer turned off, we also
have an interrupt being sent to the SYSTEMPORT INTRL_2_0 controller, and
that interrupt remains active up until the magic packet detector is
disabled which happens much later during the driver resumption.
The race happens if we have a CPU that is entering the SYSTEMPORT
INTRL2_0 handler during resume, and another CPU has managed to clear the
wake-up interrupt during bcm_sysport_resume_from_wol(). In that case, we
have the first CPU stuck in the interrupt handler with an interrupt
cause that has been cleared under its feet, and so we keep returning
IRQ_NONE and we never make any progress.
This was not a problem before because we would always turn off the
RX_SYS clock during WoL, so the SYSTEMPORT INTRL2_0 would also be turned
off as well, thus not latching the interrupt.
The fix is to make sure we do not enable either the MPD or
BRCM_TAG_MATCH interrupts since those are redundant with what the
AON_PM_L2 interrupt controller already processes and they would cause
such a race to occur.
Fixes: bb9051a2b230 ("net: systemport: Add support for WAKE_FILTER")
Fixes: 83e82f4c706b ("net: systemport: add Wake-on-LAN support")
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Fixes problem (discovered by Aurelien) introduced by recent commit:
commit b24df3e30cbf48255db866720fb71f14bf9d2f39
("cifs: update receive_encrypted_standard to handle compounded responses")
which broke the ability to respond to some lease breaks
(lease breaks being ignored is a problem since can block
server response for duration of the lease break timeout).
Signed-off-by: Steve French <[email protected]>
Reviewed-by: Ronnie Sahlberg <[email protected]>
Reviewed-by: Pavel Shilovsky <[email protected]>
|
|
For compounded PDUs we whould only wake the waiting thread for the
very last PDU of the compound.
We do this so that we are guaranteed that the demultiplex_thread will
not process or access any of those MIDs any more once the send/recv
thread starts processing.
Else there is a race where at the end of the send/recv processing we
will try to delete all the mids of the compound. If the multiplex
thread still has other mids to process at this point for this compound
this can lead to an oops.
Needed to fix recent commit:
commit 730928c8f4be88e9d6a027a16b1e8fa9c59fc077
("cifs: update smb2_queryfs() to use compounding")
Signed-off-by: Ronnie Sahlberg <[email protected]>
Signed-off-by: Steve French <[email protected]>
Reviewed-by: Pavel Shilovsky <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 4.19
First, and also hopefully the last, set of fixes for 4.19. All small
but still important fixes
mt76x0
* fix a bug when a virtual interface is removed multiple times
b43
* fix DMA error related regression with proprietary firmware
iwlwifi
* fix an oops which was a regression in v4.19-rc1
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
cifs_delete_mid() is called once we are finished handling a mid and we
expect no more work done on this mid.
Needed to fix recent commit:
commit 730928c8f4be88e9d6a027a16b1e8fa9c59fc077
("cifs: update smb2_queryfs() to use compounding")
Add a warning if someone tries to dequeue a mid that has already been
flagged to be deleted.
Also change list_del() to list_del_init() so that if we have similar bugs
resurface in the future we will not oops.
Signed-off-by: Ronnie Sahlberg <[email protected]>
Signed-off-by: Steve French <[email protected]>
Reviewed-by: Pavel Shilovsky <[email protected]>
|
|
When mounting a Windows share that is the root of a drive (eg. C$)
the server does not return . and .. directory entries. This results in
the smb2 code path erroneously skipping the 2 first entries.
Pseudo-code of the readdir() code path:
cifs_readdir(struct file, struct dir_context)
initiate_cifs_search <-- if no reponse cached yet
server->ops->query_dir_first
dir_emit_dots
dir_emit <-- adds "." and ".." if we're at pos=0
find_cifs_entry
initiate_cifs_search <-- if pos < start of current response
(restart search)
server->ops->query_dir_next <-- if pos > end of current response
(fetch next search res)
for(...) <-- loops over cur response entries
starting at pos
cifs_filldir <-- skip . and .., emit entry
cifs_fill_dirent
dir_emit
pos++
A) dir_emit_dots() always adds . & ..
and sets the current dir pos to 2 (0 and 1 are done).
Therefore we always want the index_to_find to be 2 regardless of if
the response has . and ..
B) smb1 code initializes index_of_last_entry with a +2 offset
in cifssmb.c CIFSFindFirst():
psrch_inf->index_of_last_entry = 2 /* skip . and .. */ +
psrch_inf->entries_in_buffer;
Later in find_cifs_entry() we want to find the next dir entry at pos=2
as a result of (A)
first_entry_in_buffer = cfile->srch_inf.index_of_last_entry -
cfile->srch_inf.entries_in_buffer;
This var is the dir pos that the first entry in the buffer will
have therefore it must be 2 in the first call.
If we don't offset index_of_last_entry by 2 (like in (B)),
first_entry_in_buffer=0 but we were instructed to get pos=2 so this
code in find_cifs_entry() skips the 2 first which is ok for non-root
shares, as it skips . and .. from the response but is not ok for root
shares where the 2 first are actual files
pos_in_buf = index_to_find - first_entry_in_buffer;
// pos_in_buf=2
// we skip 2 first response entries :(
for (i = 0; (i < (pos_in_buf)) && (cur_ent != NULL); i++) {
/* go entry by entry figuring out which is first */
cur_ent = nxt_dir_entry(cur_ent, end_of_smb,
cfile->srch_inf.info_level);
}
C) cifs_filldir() skips . and .. so we can safely ignore them for now.
Sample program:
int main(int argc, char **argv)
{
const char *path = argc >= 2 ? argv[1] : ".";
DIR *dh;
struct dirent *de;
printf("listing path <%s>\n", path);
dh = opendir(path);
if (!dh) {
printf("opendir error %d\n", errno);
return 1;
}
while (1) {
de = readdir(dh);
if (!de) {
if (errno) {
printf("readdir error %d\n", errno);
return 1;
}
printf("end of listing\n");
break;
}
printf("off=%lu <%s>\n", de->d_off, de->d_name);
}
return 0;
}
Before the fix with SMB1 on root shares:
<.> off=1
<..> off=2
<$Recycle.Bin> off=3
<bootmgr> off=4
and on non-root shares:
<.> off=1
<..> off=4 <-- after adding .., the offsets jumps to +2 because
<2536> off=5 we skipped . and .. from response buffer (C)
<411> off=6 but still incremented pos
<file> off=7
<fsx> off=8
Therefore the fix for smb2 is to mimic smb1 behaviour and offset the
index_of_last_entry by 2.
Test results comparing smb1 and smb2 before/after the fix on root
share, non-root shares and on large directories (ie. multi-response
dir listing):
PRE FIX
=======
pre-1-root VS pre-2-root:
ERR pre-2-root is missing [bootmgr, $Recycle.Bin]
pre-1-nonroot VS pre-2-nonroot:
OK~ same files, same order, different offsets
pre-1-nonroot-large VS pre-2-nonroot-large:
OK~ same files, same order, different offsets
POST FIX
========
post-1-root VS post-2-root:
OK same files, same order, same offsets
post-1-nonroot VS post-2-nonroot:
OK same files, same order, same offsets
post-1-nonroot-large VS post-2-nonroot-large:
OK same files, same order, same offsets
REGRESSION?
===========
pre-1-root VS post-1-root:
OK same files, same order, same offsets
pre-1-nonroot VS post-1-nonroot:
OK same files, same order, same offsets
BugLink: https://bugzilla.samba.org/show_bug.cgi?id=13107
Signed-off-by: Aurelien Aptel <[email protected]>
Signed-off-by: Paulo Alcantara <[email protected]>
Reviewed-by: Ronnie Sahlberg <[email protected]>
Signed-off-by: Steve French <[email protected]>
CC: Stable <[email protected]>
|
|
We have an impressive number of syzkaller bugs that are linked
to the fact that syzbot was able to create a networking device
with millions of TX (or RX) queues.
Let's limit the number of RX/TX queues to 4096, this really should
cover all known cases.
A separate patch will add various cond_resched() in the loops
handling sysfs entries at device creation and dismantle.
Tested:
lpaa6:~# ip link add gre-4097 numtxqueues 4097 numrxqueues 4097 type ip6gretap
RTNETLINK answers: Invalid argument
lpaa6:~# time ip link add gre-4096 numtxqueues 4096 numrxqueues 4096 type ip6gretap
real 0m0.180s
user 0m0.000s
sys 0m0.107s
Fixes: 76ff5cc91935 ("rtnl: allow to specify number of rx and tx queues on device creation")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
RX queue config for bonding master could be different from its slave
device(s). With the commit 6a9e461f6fe4 ("bonding: pass link-local
packets to bonding master also."), the packet is reinjected into stack
with skb->dev as bonding master. This potentially triggers the
message:
"bondX received packet on queue Y, but number of RX queues is Z"
whenever the queue that packet is received on is higher than the
numrxqueues on bonding master (Y > Z).
Fixes: 6a9e461f6fe4 ("bonding: pass link-local packets to bonding master also.")
Reported-by: John Sperbeck <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: Mahesh Bandewar <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Timer handlers do not imply rcu_read_lock(), so my recent fix
triggered a LOCKDEP warning when SYNACK is retransmit.
Lets add rcu_read_lock()/rcu_read_unlock() pairs around ireq->ireq_opt
usages instead of guessing what is done by callers, since it is
not worth the pain.
Get rid of ireq_opt_deref() helper since it hides the logic
without real benefit, since it is now a standard rcu_dereference().
Fixes: 1ad98e9d1bdf ("tcp/dccp: fix lockdep issue when SYN is backlogged")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: Willem de Bruijn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This reverts commit 2d4dd0da45401c7ae7332b4d1eb7bbb1348edde9.
This broke earlycon on all Renesas ARM platforms using a SCIF port for the
serial console (R-Car, RZ/A1, RZ/G1, RZ/G2 SoCs), due to an incorrect value
of port->regshift.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Acked-by: Chris Brandt <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This reverts commit 7acece71a517cad83a0842a94d94c13f271b680c.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Acked-by: Chris Brandt <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This reverts commit d76c74387e1c978b6c5524a146ab0f3f72206f98.
While commit d76c74387e1c ("serial: 8250_dw: Fix runtime PM handling")
fixes runtime PM handling when using kgdb, it introduces a traceback for
everyone else.
BUG: sleeping function called from invalid context at
/mnt/host/source/src/third_party/kernel/next/drivers/base/power/runtime.c:1034
in_atomic(): 1, irqs_disabled(): 1, pid: 1, name: swapper/0
7 locks held by swapper/0/1:
#0: 000000005ec5bc72 (&dev->mutex){....}, at: __driver_attach+0xb5/0x12b
#1: 000000005d5fa9e5 (&dev->mutex){....}, at: __device_attach+0x3e/0x15b
#2: 0000000047e93286 (serial_mutex){+.+.}, at: serial8250_register_8250_port+0x51/0x8bb
#3: 000000003b328f07 (port_mutex){+.+.}, at: uart_add_one_port+0xab/0x8b0
#4: 00000000fa313d4d (&port->mutex){+.+.}, at: uart_add_one_port+0xcc/0x8b0
#5: 00000000090983ca (console_lock){+.+.}, at: vprintk_emit+0xdb/0x217
#6: 00000000c743e583 (console_owner){-...}, at: console_unlock+0x211/0x60f
irq event stamp: 735222
__down_trylock_console_sem+0x4a/0x84
console_unlock+0x338/0x60f
__do_softirq+0x4a4/0x50d
irq_exit+0x64/0xe2
CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.19.0-rc5 #6
Hardware name: Google Caroline/Caroline, BIOS Google_Caroline.7820.286.0 03/15/2017
Call Trace:
dump_stack+0x7d/0xbd
___might_sleep+0x238/0x259
__pm_runtime_resume+0x4e/0xa4
? serial8250_rpm_get+0x2e/0x44
serial8250_console_write+0x44/0x301
? lock_acquire+0x1b8/0x1fa
console_unlock+0x577/0x60f
vprintk_emit+0x1f0/0x217
printk+0x52/0x6e
register_console+0x43b/0x524
uart_add_one_port+0x672/0x8b0
? set_io_from_upio+0x150/0x162
serial8250_register_8250_port+0x825/0x8bb
dw8250_probe+0x80c/0x8b0
? dw8250_serial_inq+0x8e/0x8e
? dw8250_check_lcr+0x108/0x108
? dw8250_runtime_resume+0x5b/0x5b
? dw8250_serial_outq+0xa1/0xa1
? dw8250_remove+0x115/0x115
platform_drv_probe+0x76/0xc5
really_probe+0x1f1/0x3ee
? driver_allows_async_probing+0x5d/0x5d
driver_probe_device+0xd6/0x112
? driver_allows_async_probing+0x5d/0x5d
bus_for_each_drv+0xbe/0xe5
__device_attach+0xdd/0x15b
bus_probe_device+0x5a/0x10b
device_add+0x501/0x894
? _raw_write_unlock+0x27/0x3a
platform_device_add+0x224/0x2b7
mfd_add_device+0x718/0x75b
? __kmalloc+0x144/0x16a
? mfd_add_devices+0x38/0xdb
mfd_add_devices+0x9b/0xdb
intel_lpss_probe+0x7d4/0x8ee
intel_lpss_pci_probe+0xac/0xd4
pci_device_probe+0x101/0x18e
...
Revert the offending patch until a more comprehensive solution
is available.
Cc: Tony Lindgren <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Phil Edworthy <[email protected]>
Fixes: d76c74387e1c ("serial: 8250_dw: Fix runtime PM handling")
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Use memblock_end_of_DRAM which provides correct last low memory
PFN. Without that, DMA32 region becomes empty resulting in zero
pages being allocated for DMA32.
This patch is based on earlier patch from palmer which never
merged into 4.19. I just edited the commit text to make more
sense.
Signed-off-by: Atish Patra <[email protected]>
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
The recent rework of the TSC calibration code introduced a regression on UV
systems as it added a call to tsc_early_init() which initializes the TSC
ADJUST values before acpi_boot_table_init(). In the case of UV systems,
that is a necessary step that calls uv_system_init(). This informs
tsc_sanitize_first_cpu() that the kernel runs on a platform with async TSC
resets as documented in commit 341102c3ef29 ("x86/tsc: Add option that TSC
on Socket 0 being non-zero is valid")
Fix it by skipping the early tsc initialization on UV systems and let TSC
init tests take place later in tsc_init().
Fixes: cf7a63ef4e02 ("x86/tsc: Calibrate tsc only once")
Suggested-by: Hedi Berriche <[email protected]>
Signed-off-by: Mike Travis <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Russ Anderson <[email protected]>
Reviewed-by: Dimitri Sivanich <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Russ Anderson <[email protected]>
Cc: Dimitri Sivanich <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Kate Stewart <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Philippe Ombredanne <[email protected]>
Cc: Pavel Tatashin <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Len Brown <[email protected]>
Cc: Dou Liyang <[email protected]>
Cc: Xiaoming Gao <[email protected]>
Cc: Rajvi Jingar <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Introduce is_early_uv_system() which uses efi.uv_systab to decide early
in the boot process whether the kernel runs on a UV system.
This is needed to skip other early setup/init code that might break
the UV platform if done too early such as before necessary ACPI tables
parsing takes place.
Suggested-by: Hedi Berriche <[email protected]>
Signed-off-by: Mike Travis <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Russ Anderson <[email protected]>
Reviewed-by: Dimitri Sivanich <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Russ Anderson <[email protected]>
Cc: Dimitri Sivanich <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Kate Stewart <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Philippe Ombredanne <[email protected]>
Cc: Pavel Tatashin <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Len Brown <[email protected]>
Cc: Dou Liyang <[email protected]>
Cc: Xiaoming Gao <[email protected]>
Cc: Rajvi Jingar <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
When FW floods the driver with control messages try to exit the cmsg
processing loop every now and then to avoid soft lockups. Cmsg
processing is generally very lightweight so 512 seems like a reasonable
budget, which should not be exceeded under normal conditions.
Fixes: 77ece8d5f196 ("nfp: add control vNIC datapath")
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Tested-by: Pieter Jansen van Vuuren <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|