aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-07-31net/mlx5e: Fix CT entry update leaks of modify header contextChris Mi1-0/+1
The cited commit allocates a new modify header to replace the old one when updating CT entry. But if failed to allocate a new one, eg. exceed the max number firmware can support, modify header will be an error pointer that will trigger a panic when deallocating it. And the old modify header point is copied to old attr. When the old attr is freed, the old modify header is lost. Fix it by restoring the old attr to attr when failed to allocate a new modify header context. So when the CT entry is freed, the right modify header context will be freed. And the panic of accessing error pointer is also fixed. Fixes: 94ceffb48eac ("net/mlx5e: Implement CT entry update") Signed-off-by: Chris Mi <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-31net/mlx5e: Require mlx5 tc classifier action support for IPsec prio capabilityRahul Rameshbabu1-3/+4
Require mlx5 classifier action support when creating IPSec chains in offload path. MLX5_IPSEC_CAP_PRIO should only be set if CONFIG_MLX5_CLS_ACT is enabled. If CONFIG_MLX5_CLS_ACT=n and MLX5_IPSEC_CAP_PRIO is set, configuring IPsec offload will fail due to the mlxx5 ipsec chain rules failing to be created due to lack of classifier action support. Fixes: fa5aa2f89073 ("net/mlx5e: Use chains for IPsec policy priority offload") Signed-off-by: Rahul Rameshbabu <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-31net/mlx5: Fix missing lock on sync reset reloadMoshe Shemesh1-1/+4
On sync reset reload work, when remote host updates devlink on reload actions performed on that host, it misses taking devlink lock before calling devlink_remote_reload_actions_performed() which results in triggering lock assert like the following: WARNING: CPU: 4 PID: 1164 at net/devlink/core.c:261 devl_assert_locked+0x3e/0x50 … CPU: 4 PID: 1164 Comm: kworker/u96:6 Tainted: G S W 6.10.0-rc2+ #116 Hardware name: Supermicro SYS-2028TP-DECTR/X10DRT-PT, BIOS 2.0 12/18/2015 Workqueue: mlx5_fw_reset_events mlx5_sync_reset_reload_work [mlx5_core] RIP: 0010:devl_assert_locked+0x3e/0x50 … Call Trace: <TASK> ? __warn+0xa4/0x210 ? devl_assert_locked+0x3e/0x50 ? report_bug+0x160/0x280 ? handle_bug+0x3f/0x80 ? exc_invalid_op+0x17/0x40 ? asm_exc_invalid_op+0x1a/0x20 ? devl_assert_locked+0x3e/0x50 devlink_notify+0x88/0x2b0 ? mlx5_attach_device+0x20c/0x230 [mlx5_core] ? __pfx_devlink_notify+0x10/0x10 ? process_one_work+0x4b6/0xbb0 process_one_work+0x4b6/0xbb0 […] Fixes: 84a433a40d0e ("net/mlx5: Lock mlx5 devlink reload callbacks") Signed-off-by: Moshe Shemesh <[email protected]> Reviewed-by: Maor Gottlieb <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-31net/mlx5: Lag, don't use the hardcoded value of the first portMark Bloch1-1/+1
The cited commit didn't change the body of the loop as it should. It shouldn't be using MLX5_LAG_P1. Fixes: 7e978e7714d6 ("net/mlx5: Lag, use actual number of lag ports") Signed-off-by: Mark Bloch <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-31net/mlx5: DR, Fix 'stack guard page was hit' error in dr_ruleYevgeny Kliteynik1-1/+1
This patch reduces the size of hw_ste_arr_optimized array that is allocated on stack from 640 bytes (5 match STEs + 5 action STES) to 448 bytes (2 match STEs + 5 action STES). This fixes the 'stack guard page was hit' issue, while still fitting majority of the usecases (up to 2 match STEs). Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-31net/mlx5: Fix error handling in irq_pool_request_irqShay Drory1-3/+7
In case mlx5_irq_alloc fails, the previously allocated index remains in the XArray, which could lead to inconsistencies. Fix it by adding error handling that erases the allocated index from the XArray if mlx5_irq_alloc returns an error. Fixes: c36326d38d93 ("net/mlx5: Round-Robin EQs over IRQs") Signed-off-by: Shay Drory <[email protected]> Reviewed-by: Maher Sanalla <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-31net/mlx5: Always drain health in shutdown callbackShay Drory2-1/+2
There is no point in recovery during device shutdown. if health work started need to wait for it to avoid races and NULL pointer access. Hence, drain health WQ on shutdown callback. Fixes: 1958fc2f0712 ("net/mlx5: SF, Add auxiliary device driver") Fixes: d2aa060d40fa ("net/mlx5: Cancel health poll before sending panic teardown command") Signed-off-by: Shay Drory <[email protected]> Reviewed-by: Moshe Shemesh <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-31net: Add skbuff.h to MAINTAINERSBreno Leitao1-0/+1
The network maintainers need to be copied if the skbuff.h is touched. This also helps git-send-email to figure out the proper maintainers when touching the file. Signed-off-by: Breno Leitao <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-31r8169: don't increment tx_dropped in case of NETDEV_TX_BUSYHeiner Kallweit1-6/+2
The skb isn't consumed in case of NETDEV_TX_BUSY, therefore don't increment the tx_dropped counter. Fixes: 188f4af04618 ("r8169: use NETDEV_TX_{BUSY/OK}") Cc: [email protected] Suggested-by: Jakub Kicinski <[email protected]> Signed-off-by: Heiner Kallweit <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-31Merge tag 'for-netdev' of ↵Jakub Kicinski2-2/+2
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2024-07-31 We've added 2 non-merge commits during the last 2 day(s) which contain a total of 2 files changed, 2 insertions(+), 2 deletions(-). The main changes are: 1) Fix BPF selftest build after tree sync with regards to a _GNU_SOURCE macro redefined compilation error, from Stanislav Fomichev. 2) Fix a wrong test in the ASSERT_OK() check in uprobe_syscall BPF selftest, from Jiri Olsa. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf/selftests: Fix ASSERT_OK condition check in uprobe_syscall test selftests/bpf: Filter out _GNU_SOURCE when compiling test_cpp ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-08-01nouveau: set placement to original placement on uvmm validate.Dave Airlie1-0/+1
When a buffer is evicted for memory pressure or TTM evict all, the placement is set to the eviction domain, this means the buffer never gets revalidated on the next exec to the correct domain. I think this should be fine to use the initial domain from the object creation, as least with VM_BIND this won't change after init so this should be the correct answer. Fixes: b88baab82871 ("drm/nouveau: implement new VM_BIND uAPI") Cc: Danilo Krummrich <[email protected]> Cc: <[email protected]> # v6.6 Signed-off-by: Dave Airlie <[email protected]> Signed-off-by: Danilo Krummrich <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-07-31netfilter: iptables: Fix potential null-ptr-deref in ip6table_nat_table_init().Kuniyuki Iwashima1-5/+9
ip6table_nat_table_init() accesses net->gen->ptr[ip6table_nat_net_ops.id], but the function is exposed to user space before the entry is allocated via register_pernet_subsys(). Let's call register_pernet_subsys() before xt_register_template(). Fixes: fdacd57c79b7 ("netfilter: x_tables: never register tables by default") Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2024-07-31netfilter: iptables: Fix null-ptr-deref in iptable_nat_table_init().Kuniyuki Iwashima1-8/+10
We had a report that iptables-restore sometimes triggered null-ptr-deref at boot time. [0] The problem is that iptable_nat_table_init() is exposed to user space before the kernel fully initialises netns. In the small race window, a user could call iptable_nat_table_init() that accesses net_generic(net, iptable_nat_net_id), which is available only after registering iptable_nat_net_ops. Let's call register_pernet_subsys() before xt_register_template(). [0]: bpfilter: Loaded bpfilter_umh pid 11702 Started bpfilter BUG: kernel NULL pointer dereference, address: 0000000000000013 PF: supervisor write access in kernel mode PF: error_code(0x0002) - not-present page PGD 0 P4D 0 PREEMPT SMP NOPTI CPU: 2 PID: 11879 Comm: iptables-restor Not tainted 6.1.92-99.174.amzn2023.x86_64 #1 Hardware name: Amazon EC2 c6i.4xlarge/, BIOS 1.0 10/16/2017 RIP: 0010:iptable_nat_table_init (net/ipv4/netfilter/iptable_nat.c:87 net/ipv4/netfilter/iptable_nat.c:121) iptable_nat Code: 10 4c 89 f6 48 89 ef e8 0b 19 bb ff 41 89 c4 85 c0 75 38 41 83 c7 01 49 83 c6 28 41 83 ff 04 75 dc 48 8b 44 24 08 48 8b 0c 24 <48> 89 08 4c 89 ef e8 a2 3b a2 cf 48 83 c4 10 44 89 e0 5b 5d 41 5c RSP: 0018:ffffbef902843cd0 EFLAGS: 00010246 RAX: 0000000000000013 RBX: ffff9f4b052caa20 RCX: ffff9f4b20988d80 RDX: 0000000000000000 RSI: 0000000000000064 RDI: ffffffffc04201c0 RBP: ffff9f4b29394000 R08: ffff9f4b07f77258 R09: ffff9f4b07f77240 R10: 0000000000000000 R11: ffff9f4b09635388 R12: 0000000000000000 R13: ffff9f4b1a3c6c00 R14: ffff9f4b20988e20 R15: 0000000000000004 FS: 00007f6284340000(0000) GS:ffff9f51fe280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000013 CR3: 00000001d10a6005 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? show_trace_log_lvl (arch/x86/kernel/dumpstack.c:259) ? show_trace_log_lvl (arch/x86/kernel/dumpstack.c:259) ? xt_find_table_lock (net/netfilter/x_tables.c:1259) ? __die_body.cold (arch/x86/kernel/dumpstack.c:478 arch/x86/kernel/dumpstack.c:420) ? page_fault_oops (arch/x86/mm/fault.c:727) ? exc_page_fault (./arch/x86/include/asm/irqflags.h:40 ./arch/x86/include/asm/irqflags.h:75 arch/x86/mm/fault.c:1470 arch/x86/mm/fault.c:1518) ? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:570) ? iptable_nat_table_init (net/ipv4/netfilter/iptable_nat.c:87 net/ipv4/netfilter/iptable_nat.c:121) iptable_nat xt_find_table_lock (net/netfilter/x_tables.c:1259) xt_request_find_table_lock (net/netfilter/x_tables.c:1287) get_info (net/ipv4/netfilter/ip_tables.c:965) ? security_capable (security/security.c:809 (discriminator 13)) ? ns_capable (kernel/capability.c:376 kernel/capability.c:397) ? do_ipt_get_ctl (net/ipv4/netfilter/ip_tables.c:1656) ? bpfilter_send_req (net/bpfilter/bpfilter_kern.c:52) bpfilter nf_getsockopt (net/netfilter/nf_sockopt.c:116) ip_getsockopt (net/ipv4/ip_sockglue.c:1827) __sys_getsockopt (net/socket.c:2327) __x64_sys_getsockopt (net/socket.c:2342 net/socket.c:2339 net/socket.c:2339) do_syscall_64 (arch/x86/entry/common.c:51 arch/x86/entry/common.c:81) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) RIP: 0033:0x7f62844685ee Code: 48 8b 0d 45 28 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 37 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 0a c3 66 0f 1f 84 00 00 00 00 00 48 8b 15 09 RSP: 002b:00007ffd1f83d638 EFLAGS: 00000246 ORIG_RAX: 0000000000000037 RAX: ffffffffffffffda RBX: 00007ffd1f83d680 RCX: 00007f62844685ee RDX: 0000000000000040 RSI: 0000000000000000 RDI: 0000000000000004 RBP: 0000000000000004 R08: 00007ffd1f83d670 R09: 0000558798ffa2a0 R10: 00007ffd1f83d680 R11: 0000000000000246 R12: 00007ffd1f83e3b2 R13: 00007f628455baa0 R14: 00007ffd1f83d7b0 R15: 00007f628457a008 </TASK> Modules linked in: iptable_nat(+) bpfilter rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache veth xt_state xt_connmark xt_nat xt_statistic xt_MASQUERADE xt_mark xt_addrtype ipt_REJECT nf_reject_ipv4 nft_chain_nat nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_comment nft_compat nf_tables nfnetlink overlay nls_ascii nls_cp437 vfat fat ghash_clmulni_intel aesni_intel ena crypto_simd ptp cryptd i8042 pps_core serio button sunrpc sch_fq_codel configfs loop dm_mod fuse dax dmi_sysfs crc32_pclmul crc32c_intel efivarfs CR2: 0000000000000013 Fixes: fdacd57c79b7 ("netfilter: x_tables: never register tables by default") Reported-by: Takahiro Kawahara <[email protected]> Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2024-07-31x86/setup: Parse the builtin command line before mergingBorislav Petkov (AMD)3-8/+23
Commit in Fixes was added as a catch-all for cases where the cmdline is parsed before being merged with the builtin one. And promptly one issue appeared, see Link below. The microcode loader really needs to parse it that early, but the merging happens later. Reshuffling the early boot nightmare^W code to handle that properly would be a painful exercise for another day so do the chicken thing and parse the builtin cmdline too before it has been merged. Fixes: 0c40b1c7a897 ("x86/setup: Warn when option parsing is done too early") Reported-by: Mike Lothian <[email protected]> Signed-off-by: Borislav Petkov (AMD) <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/all/20240730152108.GAZqkE5Dfi9AuKllRw@fat_crate.local Link: https://lore.kernel.org/r/20240722152330.GCZp55ck8E_FT4kPnC@fat_crate.local
2024-07-31drm/atomic: Allow userspace to use damage clips with async flipsAndré Almeida1-1/+2
Allow userspace to use damage clips with atomic async flips. Damage clips are useful for partial plane updates, which can be helpful for clients that want to do flips asynchronously. Fixes: 0e26cc72c71c ("drm: Refuse to async flip with atomic prop changes") Signed-off-by: André Almeida <[email protected]> Reviewed-by: Simon Ser <[email protected]> Signed-off-by: Simon Ser <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-07-31drm/atomic: Allow userspace to use explicit sync with atomic async flipsAndré Almeida1-1/+3
Allow userspace to use explicit synchronization with atomic async flips. That means that the flip will wait for some hardware fence, and then will flip as soon as possible (async) in regard of the vblank. Fixes: 0e26cc72c71c ("drm: Refuse to async flip with atomic prop changes") Signed-off-by: André Almeida <[email protected]> Reviewed-by: Simon Ser <[email protected]> Signed-off-by: Simon Ser <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-07-31ALSA: hda: Conditionally use snooping for AMD HDMITakashi Iwai2-2/+10
The recent regression report revealed that the use of WC pages for AMD HDMI device together with AMD IOMMU leads to unexpected truncation or noises. The issue seems triggered by the change in the kernel core memory allocation that enables IOMMU driver to use always S/G buffers. Meanwhile, the use of WC pages has been a workaround for the similar issue with standard pages in the past. So, now we need to apply the workaround conditionally, namely, only when IOMMU isn't in place. This patch modifies the workaround code to check the DMA ops at first and apply the snoop-off only when needed. Fixes: f5ff79fddf0e ("dma-mapping: remove CONFIG_DMA_REMAP") Link: https://bugzilla.kernel.org/show_bug.cgi?id=219087 Link: https://patch.msgid.link/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2024-07-31minmax: fix up min3() and max3() tooLinus Torvalds1-2/+10
David Laight pointed out that we should deal with the min3() and max3() mess too, which still does excessive expansion. And our current macros are actually rather broken. In particular, the macros did this: #define min3(x, y, z) min((typeof(x))min(x, y), z) #define max3(x, y, z) max((typeof(x))max(x, y), z) and that not only is a nested expansion of possibly very complex arguments with all that involves, the typing with that "typeof()" cast is completely wrong. For example, imagine what happens in max3() if 'x' happens to be a 'unsigned char', but 'y' and 'z' are 'unsigned long'. The types are compatible, and there's no warning - but the result is just random garbage. No, I don't think we've ever hit that issue in practice, but since we now have sane infrastructure for doing this right, let's just use it. It fixes any excessive expansion, and also avoids these kinds of broken type issues. Requested-by: David Laight <[email protected]> Acked-by: Arnd Bergmann <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2024-07-31riscv: cpufeature: Do not drop Linux-internal extensionsSamuel Holland1-8/+6
The Linux-internal Xlinuxenvcfg ISA extension is omitted from the riscv_isa_ext array because it has no DT binding and should not appear in /proc/cpuinfo. The logic added in commit 625034abd52a ("riscv: add ISA extensions validation callback") assumes all extensions are included in riscv_isa_ext, and so riscv_resolve_isa() wrongly drops Xlinuxenvcfg from the final ISA string. Instead, accept such Linux-internal ISA extensions as if they have no validation callback. Fixes: 625034abd52a ("riscv: add ISA extensions validation callback") Signed-off-by: Samuel Holland <[email protected]> Reviewed-by: Andrew Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Palmer Dabbelt <[email protected]>
2024-07-31drm/i915/dp_mst: Enable LT fallback between UHBR/non-UHBR link ratesImre Deak1-5/+0
Enable switching between UHBR and non-UHBR link rates on MST links when reducing the link parameters after an LT failure. Reviewed-by: Suraj Kandpal <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-07-31drm/i915/dp_mst: Ensure link parameters are up-to-date for a disabled linkImre Deak3-0/+35
As explained in the previous patch, the MST link BW reported by branch devices during topology probing/path resources enumeration depends on the link parameters programmed to DPCD to be up-to-date. After a sink is plugged this is not ensured, as those DPCD values start out zeroed. The target link parameters (for a subsequent modeset) are the maximum that is supported, so make sure these maximum values are programmed before the topology probing. Reviewed-by: Suraj Kandpal <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-07-31drm/i915/dp_mst: Reprobe the MST topology after a link parameter changeImre Deak3-1/+41
The MST link BW reported by branch devices via the ENUM_PATH_RESOURCES message depends on the channel coding and link rate/lane count parameters programmed to DPCD. This is the case at least for some branch devices, while for others the reported BW is independent of the link parameters. In any case the DP standard requires the branch device to adjust the returned value to both account for the different way the BW for FEC is accounted for (included in the returned value for non-UHBR and not included for UHBR rates) and to limit the returned value to the (trained) link BW between the source and first downstream branch device, see DP v2.0/v2.1 Figure 2-94, DP v2.1 5.9.7. Presumedly this is also the reason why the standard requires the DPCD link rate/lane count values being up-to-date before sending the ENUM_PATH_RESOURCES message, see DP v2.1 2.14.9.4. Based on the above reprobe the MST topology after the link is retrained with new link parameters to make sure that the MST link BW tracked in the MST topology state (via each topology port's full_pbn value) is up-to-date. The next patch will make sure that the MST link BW is also kept up-to-date if the link is disabled. Reviewed-by: Suraj Kandpal <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-07-31drm/i915/dp_mst: Queue modeset-retry after a failed payload BW allocationImre Deak1-4/+7
If the MST payload allocation failed, enabling the output also failed most probably, so send a uevent accordinly requesting the user to retry the modeset. While at it remove the driver specific debug message, there is already one printed by drm_dp_add_payload_part1(). Reviewed-by: Suraj Kandpal <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-07-31drm/i915/dp_mst: Configure MST after the link parameters are resetImre Deak1-2/+2
The MST topology probing depends on the maximum link parameters - programmed to DPCD if required by a follow-up patch - so make sure these parameters are up-to-date before configuring and probing the MST topology. Reviewed-by: Suraj Kandpal <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-07-31drm/i915/dp_mst: Reduce the link parameters in BW order after LT failuresImre Deak4-2/+159
On MST links - at least for some MST branch devices - the list of modes returned to users on an enabled link depends on the current link rate/lane count parameters (besides the DPRX link capabilities, any MST branch BW limit and the maximum link parameters reduced after LT failures). In particular the MST branch BW limit may depend on the link rate/lane count parameters programmed to DPCD. After an LT failure and limiting the maximum link parameters accordingly, users should see a mode list reflecting these new limits. However with the current fallback order this isn't ensured, as the new limit could allow for modes requiring a higher link BW, but these modes will be filtered out due to the enabled link's lower link BW. Ensure that the mode list changes in a consistent way after a link training failure and reducing the link parameters by changing the fallback order on MST links to happen in BW order. v2: - s/INTEL_DP_MAX_SUPPORTED_LANE_COUNTS/INTEL_DP_MAX_SUPPORTED_LANE_CONFIGS and s/num_common_lane_counts/num_common_lane_configs to make the difference wrt. max lane counts clearer. (Suraj) - Add a TODO comment to make the SST fallback logic work the same way as MST. (Arun) - Use sort_r()'s default swap function instead of a custom one. Cc: Suraj Kandpal <[email protected]> Cc: Arun R Murthy <[email protected]> Reviewed-by: Suraj Kandpal <[email protected]> Reviewed-by: Arun R Murthy <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-07-31drm/i915/dp: Add helpers to set link training mode, BW parametersImre Deak2-11/+29
Add helpers to set the link mode and BW parameters. These are required by a follow-up patch setting the parameters for a disabled link. Reviewed-by: Suraj Kandpal <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-07-31drm/i915/dp: Add a separate function to reduce the link parametersImre Deak1-8/+31
A follow-up patch will add an alternative way to reduce the link parameters in BW order on MST links, prepare for that here. Reviewed-by: Suraj Kandpal <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-07-31drm/i915/dp: Send only a single modeset-retry uevent for a commitImre Deak2-0/+7
There are multiple failure cases a modeset-retry uevent can be sent for a link (TBT tunnel BW allocation failure, unrecoverable link training failure), a follow-up patch adding the handling for a new case where the DP MST payload allocation fails. The uevent is the same in all cases, sent to all the connectors on the link, so in case of multiple failures there is no point in sending a separate uevent for each failure; prevent this, sending only a single modeset-retry uevent for a commit. Reviewed-by: Arun R Murthy <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-07-31drm/i915/dp: Initialize the link parameters during HW readoutImre Deak1-1/+4
Initialize the DP link parameters during HW readout. These need to be up-to-date at least for the MST topology probing, which depends on the link rate and lane count programmed in DPCD. A follow-up patch will program the DPCD values to reflect the maximum link parameters before the first MST topology probing, but should do so only if the link is disabled (link_trained==false). Reviewed-by: Suraj Kandpal <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-07-31drm/i915/ddi: For an active output call the DP encoder sync_state() only for DPImre Deak1-1/+2
If the DDI encoder output is enabled in HDMI mode there is no point in calling intel_dp_sync_state(), as in that case the DPCD initialization will fail - as expected - with AUX timeouts. Prevent calling the hook in this case. Reviewed-by: Suraj Kandpal <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-07-31drm/dp_mst: Simplify the condition when to enumerate path resourcesImre Deak1-11/+8
In the if (old_ddps != port->ddps || !created) if (port->ddps && !port->input) ret = drm_dp_send_enum_path_resources(); sequence the first if's condition is true if the port exists already (!created) or the port was created anew (hence old_ddps==0) and it was in the plugged state (port->ddps==1). The second if's condition is true for output ports in the plugged state. So the function is called for an output port in the plugged state, regardless if it already existed or not and regardless of the old plugged state. In all other cases port->full_pbn can be zeroed as the port is either an input for which full_pbn is never set, or an output in the unplugged state for which full_pbn was already zeroed previously or the port was just created (with port->full_pbn==0). Simplify the condition, making it clear that the path resources are always enumerated for an output port in the plugged state. Cc: Lyude Paul <[email protected]> Cc: [email protected] Reviewed-by: Lyude Paul <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-07-31drm/dp_mst: Add a helper to queue a topology probeImre Deak2-0/+29
A follow up i915 patch will need to reprobe the MST topology after the initial probing, add a helper for this. Cc: Lyude Paul <[email protected]> Cc: [email protected] Reviewed-by: Lyude Paul <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-07-31drm/dp_mst: Factor out function to queue a topology probe workImre Deak1-2/+7
Factor out a function to queue a work for probing the topology, also used by the next patch. Cc: Lyude Paul <[email protected]> Cc: [email protected] Reviewed-by: Lyude Paul <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-07-31s390: Keep inittext section writableHeiko Carstens2-10/+2
There is no added security by making the inittext section non-writable, however it does split part of the kernel mapping into 4K mappings instead of 1M mappings: ---[ Kernel Image Start ]--- 0x000003ffe0000000-0x000003ffe0e00000 14M PMD RO X 0x000003ffe0e00000-0x000003ffe0ec7000 796K PTE RO X 0x000003ffe0ec7000-0x000003ffe0f00000 228K PTE RO NX 0x000003ffe0f00000-0x000003ffe1300000 4M PMD RO NX 0x000003ffe1300000-0x000003ffe1353000 332K PTE RO NX 0x000003ffe1353000-0x000003ffe1400000 692K PTE RW NX 0x000003ffe1400000-0x000003ffe1500000 1M PMD RW NX 0x000003ffe1500000-0x000003ffe1700000 2M PTE RW NX <--- 0x000003ffe1700000-0x000003ffe1800000 1M PMD RW NX 0x000003ffe1800000-0x000003ffe187e000 504K PTE RW NX ---[ Kernel Image End ]--- Keep the inittext writable and enable instruction execution protection (aka noexec) later to prevent this. This also allows to use the generic free_initmem() implementation. ---[ Kernel Image Start ]--- 0x000003ffe0000000-0x000003ffe0e00000 14M PMD RO X 0x000003ffe0e00000-0x000003ffe0ec7000 796K PTE RO X 0x000003ffe0ec7000-0x000003ffe0f00000 228K PTE RO NX 0x000003ffe0f00000-0x000003ffe1300000 4M PMD RO NX 0x000003ffe1300000-0x000003ffe1353000 332K PTE RO NX 0x000003ffe1353000-0x000003ffe1400000 692K PTE RW NX 0x000003ffe1400000-0x000003ffe1800000 4M PMD RW NX <--- 0x000003ffe1800000-0x000003ffe187e000 504K PTE RW NX ---[ Kernel Image End ]--- Reviewed-by: Alexander Gordeev <[email protected]> Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2024-07-31s390/vmlinux.lds.S: Move ro_after_init section behind rodata sectionHeiko Carstens1-8/+9
The .data.rel.ro and .got section were added between the rodata and ro_after_init data section, which adds an RW mapping in between all RO mapping of the kernel image: ---[ Kernel Image Start ]--- 0x000003ffe0000000-0x000003ffe0e00000 14M PMD RO X 0x000003ffe0e00000-0x000003ffe0ec7000 796K PTE RO X 0x000003ffe0ec7000-0x000003ffe0f00000 228K PTE RO NX 0x000003ffe0f00000-0x000003ffe1300000 4M PMD RO NX 0x000003ffe1300000-0x000003ffe1331000 196K PTE RO NX 0x000003ffe1331000-0x000003ffe13b3000 520K PTE RW NX <--- 0x000003ffe13b3000-0x000003ffe13d5000 136K PTE RO NX 0x000003ffe13d5000-0x000003ffe1400000 172K PTE RW NX 0x000003ffe1400000-0x000003ffe1500000 1M PMD RW NX 0x000003ffe1500000-0x000003ffe1700000 2M PTE RW NX 0x000003ffe1700000-0x000003ffe1800000 1M PMD RW NX 0x000003ffe1800000-0x000003ffe187e000 504K PTE RW NX ---[ Kernel Image End ]--- Move the ro_after_init data section again right behind the rodata section to prevent interleaving RO and RW mappings: ---[ Kernel Image Start ]--- 0x000003ffe0000000-0x000003ffe0e00000 14M PMD RO X 0x000003ffe0e00000-0x000003ffe0ec7000 796K PTE RO X 0x000003ffe0ec7000-0x000003ffe0f00000 228K PTE RO NX 0x000003ffe0f00000-0x000003ffe1300000 4M PMD RO NX 0x000003ffe1300000-0x000003ffe1353000 332K PTE RO NX 0x000003ffe1353000-0x000003ffe1400000 692K PTE RW NX 0x000003ffe1400000-0x000003ffe1500000 1M PMD RW NX 0x000003ffe1500000-0x000003ffe1700000 2M PTE RW NX 0x000003ffe1700000-0x000003ffe1800000 1M PMD RW NX 0x000003ffe1800000-0x000003ffe187e000 504K PTE RW NX ---[ Kernel Image End ]--- Reviewed-by: Alexander Gordeev <[email protected]> Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2024-07-31s390/mm: Get rid of RELOC_HIDE()Heiko Carstens1-8/+2
Since __va(0) does not translate to NULL anymore remove RELOC_HIDE() which was only added to get rid of a compile warning with clang W=1: arch/s390/mm/vmem.c:666:36: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic] 666 | __set_memory_4k(__va(0), __va(0) + ident_map_size); | ~~~~~~~ ^ Reviewed-by: Alexander Gordeev <[email protected]> Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2024-07-31s390/mm/ptdump: Improve sorting of markersHeiko Carstens1-47/+53
Use the sort() from lib/sort.c to sort markers instead of the private implementation. The current implementation does not sort markers properly if they have to be moved downwards: ---[ Real Memory Copy Area Start ]--- 0x0000035b903ff000-0x0000035b90400000 4K PTE I ---[ vmalloc Area Start ]--- ---[ Real Memory Copy Area End ]--- Add a new member to each marker which indicates if a marker is start of an area. If addresses of areas are equal consider an address which defines the start of an area higher than the address which defines the end of an area. In result the output is sorted as intended: ---[ Real Memory Copy Area Start ]--- 0x0000019cedcff000-0x0000019cedd00000 4K PTE I ---[ Real Memory Copy Area End ]--- ---[ vmalloc Area Start ]--- Reviewed-by: Alexander Gordeev <[email protected]> Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2024-07-31s390/mm/ptdump: Add support for relocated lowcore mappingHeiko Carstens1-13/+22
The page table dumper contains a hard coded assumption that the first mapped area starts at address zero. With a relocated lowcore this is not true anymore. Subsequently the first entry (lowcore) is printed as if it would contain everything from address zero until the end of the location of the lowcore area. Fix this by adding a single "Kernel Virtual Address Space" entry, which always starts at address zero. It ends when the lowcore area starts which is either address zero, or its relocated address. Reviewed-by: Sven Schnelle <[email protected]> Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2024-07-31s390/mm/ptdump: Fix handling of identity mapping areaHeiko Carstens1-9/+12
Since virtual and real addresses are not the same anymore the assumption that the kernel image is contained within the identity mapping is also not true anymore. Fix this by adding two explicit areas and at the correct locations: one for the 8kb lowcore area, and one for the identity mapping. Fixes: c98d2ecae08f ("s390/mm: Uncouple physical vs virtual address spaces") Reviewed-by: Alexander Gordeev <[email protected]> Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2024-07-31s390/cio: Add missing MODULE_DESCRIPTION() macrosJeff Johnson2-0/+2
With ARCH=s390, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/s390/cio/ccwgroup.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/s390/cio/vfio_ccw.o Add the missing invocations of the MODULE_DESCRIPTION() macro. Reviewed-by: Eric Farman <[email protected]> Reviewed-by: Vineeth Vijayan <[email protected]> Signed-off-by: Jeff Johnson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vasily Gorbik <[email protected]>
2024-07-31s390/alternatives: Remove unused empty header fileHeiko Carstens1-0/+0
Remove the unused and empty arch/s390/kernel/alternative.h header file which was added by mistake. Fixes: 5ade5be4edf8 ("s390: Add infrastructure to patch lowcore accesses") Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2024-07-31s390/fpu: Re-add exception handling in load_fpu_state()Heiko Carstens1-1/+1
With the recent rewrite of the fpu code exception handling for the lfpc instruction within load_fpu_state() was erroneously removed. Add it again to prevent that loading invalid floating point register values cause an unhandled specification exception. Fixes: 8c09871a950a ("s390/fpu: limit save and restore to used registers") Cc: [email protected] Reported-by: Aristeu Rozanski <[email protected]> Tested-by: Aristeu Rozanski <[email protected]> Reviewed-by: Vasily Gorbik <[email protected]> Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2024-07-31ALSA: usb-audio: Correct surround channels in UAC1 channel mapTakashi Iwai1-2/+2
USB-audio driver puts SNDRV_CHMAP_SL and _SR as left and right surround channels for UAC1 channel map, respectively. But they should have been SNDRV_CHMAP_RL and _RR; the current value *_SL and _SR are rather "side" channels, not "surround". I guess I took those mistakenly when I read the spec mentioning "surround left". This patch corrects those entries to be the right channels. Suggested-by: Sylvain BERTRAND <[email protected]> Closes: https://lore.kernel.orgZ/qIyJD8lhd8hFhlC@freedom Fixes: 04324ccc75f9 ("ALSA: usb-audio: add channel map support") Cc: <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2024-07-31ALSA: seq: ump: Explicitly reset RPN with Null RPNTakashi Iwai1-5/+16
RPN with 127:127 is treated as a Null RPN, just to reset the parameters, and it's not translated to MIDI2. Although the current code can work as is in most cases, better to implement the RPN reset explicitly for Null message. Link: https://patch.msgid.link/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2024-07-31ALSA: seq: ump: Transmit RPN/NRPN message at each MSB/LSB data receptionTakashi Iwai1-30/+44
Just like the core UMP conversion helper, we need to deal with the partially-filled RPN/NRPN data in the sequencer UMP converter as well. Link: https://patch.msgid.link/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2024-07-31ALSA: seq: ump: Use the common RPN/bank conversion contextTakashi Iwai2-17/+7
The UMP core conversion helper API already defines the context needed to record the bank and RPN/NRPN values, and we can simply re-use the same struct instead of re-defining the same content as a different name. Link: https://patch.msgid.link/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2024-07-31ALSA: ump: Explicitly reset RPN with Null RPNTakashi Iwai1-5/+14
RPN with 127:127 is treated as a Null RPN, just to reset the parameters, and it's not translated to MIDI2. Although the current code can work as is in most cases, better to implement the RPN reset explicitly for Null message. Link: https://patch.msgid.link/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2024-07-31ALSA: ump: Transmit RPN/NRPN message at each MSB/LSB data receptionTakashi Iwai2-17/+33
The UMP 1.1 spec says that an RPN/NRPN should be sent when one of the following occurs: * a CC 38 is received * a subsequent CC 6 is received * a CC 98, 99, 100, and 101 is received, indicating the last RPN/NRPN message has ended and a new one has started That said, we should send a partial data even if it's not fully filled. Let's change the UMP conversion helper code to follow that rule. Link: https://patch.msgid.link/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2024-07-31drm/dp: Describe target_rr_divider in struct drm_dp_as_sdpMitul Golani1-0/+1
Describe newly added parameter target_rr_divider in struct drm_dp_as_sdp. -v2: Remove extra line from commit message.(Lucas) -v3: Rebase. Fixes: a20c6d954d75 ("drm/dp: Add refresh rate divider to struct representing AS SDP") Cc: Mitul Golani <[email protected]> Cc: Arun R Murthy <[email protected]> Cc: Suraj Kandpal <[email protected]> Cc: Ankit Nautiyal <[email protected]> Cc: Jani Nikula <[email protected]> Cc: Stephen Rothwell <[email protected]> Signed-off-by: Mitul Golani <[email protected]> Reviewed-by: Ankit Nautiyal <[email protected]> Acked-by: Maarten Lankhorst <[email protected]> Signed-off-by: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-07-31perf/x86: Fix smp_processor_id()-in-preemptible warningsLi Huafei1-10/+12
The following bug was triggered on a system built with CONFIG_DEBUG_PREEMPT=y: # echo p > /proc/sysrq-trigger BUG: using smp_processor_id() in preemptible [00000000] code: sh/117 caller is perf_event_print_debug+0x1a/0x4c0 CPU: 3 UID: 0 PID: 117 Comm: sh Not tainted 6.11.0-rc1 #109 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x4f/0x60 check_preemption_disabled+0xc8/0xd0 perf_event_print_debug+0x1a/0x4c0 __handle_sysrq+0x140/0x180 write_sysrq_trigger+0x61/0x70 proc_reg_write+0x4e/0x70 vfs_write+0xd0/0x430 ? handle_mm_fault+0xc8/0x240 ksys_write+0x9c/0xd0 do_syscall_64+0x96/0x190 entry_SYSCALL_64_after_hwframe+0x4b/0x53 This is because the commit d4b294bf84db ("perf/x86: Hybrid PMU support for counters") took smp_processor_id() outside the irq critical section. If a preemption occurs in perf_event_print_debug() and the task is migrated to another cpu, we may get incorrect pmu debug information. Move smp_processor_id() back inside the irq critical section to fix this issue. Fixes: d4b294bf84db ("perf/x86: Hybrid PMU support for counters") Signed-off-by: Li Huafei <[email protected]> Reviewed-and-tested-by: K Prateek Nayak <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Reviewed-by: Kan Liang <[email protected]> Link: https://lore.kernel.org/r/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.