Age | Commit message (Collapse) | Author | Files | Lines |
|
Fix smatch warning:
drivers/platform/mellanox/mlxreg-lc.c:866 mlxreg_lc_probe() warn: passing zero to 'PTR_ERR'
by removing 'err = PTR_ERR(regmap)'.
Fixes: b4b830a34d80 ("platform/mellanox: mlxreg-lc: Fix error flow and extend verbosity")
Reported-by: kernel test robot <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Vadim Pasternak <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
2 keymap fixes for the Acer Aspire One AOD270 and the same hardware
rebranded as Packard Bell Dot SC:
1. The F2 key is marked with a big '?' symbol on the Packard Bell Dot SC,
this sends WMID_HOTKEY_EVENTs with a scancode of 0x27 add a mapping
for this.
2. Scancode 0x61 is KEY_SWITCHVIDEOMODE. Usually this is a duplicate
input event with the "Video Bus" input device events. But on these devices
the "Video Bus" does not send events for this key. Map 0x61 to KEY_UNKNOWN
instead of using KE_IGNORE so that udev/hwdb can override it on these devs.
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The logic that conditionally allocates one additional page at each
swapper page table level if KASLR is enabled is also applied to the
initial ID map, now that we have started using the same set of macros
to allocate the space for it.
However, the placement of the kernel in physical memory might result in
additional pages being needed at any level, even if KASLR is disabled in
the build. So account for this in the computation.
Fixes: c3cee924bd85 ("arm64: head: cover entire kernel image in initial ID map")
Signed-off-by: Ard Biesheuvel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
The platform_get_irq() returns negative error codes. It can't actually
return zero.
Signed-off-by: Yu Zhe <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Even non-KASLR kernels can be built as relocatable, to work around
broken bootloaders that violate the rules regarding physical placement
of the kernel image - in this case, the physical offset modulo 2 MiB is
used as the KASLR offset, and all absolute symbol references are fixed
up in the usual way. This workaround is enabled by default.
CONFIG_RELOCATABLE can also be disabled entirely, in which case the
relocation code and the code that captures the offset are omitted from
the build. However, since commit aacd149b6238 ("arm64: head: avoid
relocating the kernel twice for KASLR"), this code got out of sync, and
we still add the offset to the kernel virtual address before populating
the page tables even though we never capture it. This means we add a
bogus value instead, breaking the boot entirely.
Fixes: aacd149b6238 ("arm64: head: avoid relocating the kernel twice for KASLR")
Signed-off-by: Ard Biesheuvel <[email protected]>
Tested-by: Mikulas Patocka <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Like crashk_res, Calling crash_exclude_mem_range function with
crashk_low_res area would need extra crash_mem range too.
Add one more extra cmem slot in case of crashk_low_res is used.
Signed-off-by: Levi Yun <[email protected]>
Fixes: 944a45abfabc ("arm64: kdump: Reimplement crashkernel=X")
Cc: <[email protected]> # 5.19.x
Acked-by: Baoquan He <[email protected]>
Reviewed-by: Catalin Marinas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
slab_mutex/cpu_hotplug_lock
A circular locking problem is reported by lockdep due to the following
circular locking dependency.
+--> cpu_hotplug_lock --> slab_mutex --> kn->active --+
| |
+-----------------------------------------------------+
The forward cpu_hotplug_lock ==> slab_mutex ==> kn->active dependency
happens in
kmem_cache_destroy(): cpus_read_lock(); mutex_lock(&slab_mutex);
==> sysfs_slab_unlink()
==> kobject_del()
==> kernfs_remove()
==> __kernfs_remove()
==> kernfs_drain(): rwsem_acquire(&kn->dep_map, ...);
The backward kn->active ==> cpu_hotplug_lock dependency happens in
kernfs_fop_write_iter(): kernfs_get_active();
==> slab_attr_store()
==> cpu_partial_store()
==> flush_all(): cpus_read_lock()
One way to break this circular locking chain is to avoid holding
cpu_hotplug_lock and slab_mutex while deleting the kobject in
sysfs_slab_unlink() which should be equivalent to doing a write_lock
and write_unlock pair of the kn->active virtual lock.
Since the kobject structures are not protected by slab_mutex or the
cpu_hotplug_lock, we can certainly release those locks before doing
the delete operation.
Move sysfs_slab_unlink() and sysfs_slab_release() to the newly
created kmem_cache_release() and call it outside the slab_mutex &
cpu_hotplug_lock critical sections. There will be a slight delay
in the deletion of sysfs files if kmem_cache_release() is called
indirectly from a work function.
Fixes: 5a836bf6b09f ("mm: slub: move flush_cpu_slab() invocations __free_slab() invocations out of IRQ context")
Signed-off-by: Waiman Long <[email protected]>
Reviewed-by: Hyeonggon Yoo <[email protected]>
Reviewed-by: Roman Gushchin <[email protected]>
Acked-by: David Rientjes <[email protected]>
Link: https://lore.kernel.org/all/YwOImVd+nRUsSAga@hyeyoo/
Signed-off-by: Vlastimil Babka <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
"USB-serial fixes for 6.0-rc4
Here are a couple of fixes for two long-standing issues with some older
ch341 devices and a number of new device ids.
All have been in linux-next with no reported issues."
* tag 'usb-serial-6.0-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: ch341: fix disabled rx timer on older devices
USB: serial: ch341: fix lost character on LCR updates
USB: serial: cp210x: add Decagon UCA device id
USB: serial: option: add support for Cinterion MV32-WA/WB RmNet mode
USB: serial: ftdi_sio: add Omron CS1W-CIF31 device id
USB: serial: option: add Quectel EM060K modem
USB: serial: option: add support for OPPO R11 diag port
|
|
This patch updates device status array range from 11 to 12 as we will
be reading status from device number 0 to device number 11 inclusive.
Without this patch we can potentially access status array out of range
during auto-enumeration.
Fixes: aa1262ca6695 ("soundwire: qcom: Check device status before reading devid")
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
For passive connections, the refcount increment has been done in
smc_clcsock_accept()-->smc_sock_alloc().
Fixes: 3b2dec2603d5 ("net/smc: restructure client and server code in af_smc")
Signed-off-by: Yacan Liu <[email protected]>
Reviewed-by: Tony Lu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- GVT fixes including fix for a CommetLake regression in mmio table
and misc doc and typo fixes
- Fix CCS handling (Matt)
- Fix for guc requests after reset (Daniele)
- Display DSI related fixes (Jani)
- Display backlight related fixes (Arun, Jouni)
Signed-off-by: Dave Airlie <[email protected]>
From: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This reverts commit 90fabae8a2c225c4e4936723c38857887edde5cc.
Patch was applied hastily, revert and let the v2 be reviewed.
Fixes: 90fabae8a2c2 ("sch_cake: Return __NET_XMIT_STOLEN when consuming enqueued skb")
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Eric Dumazet says:
====================
tcp: tcp challenge ack fixes
syzbot found a typical data-race addressed in the first patch.
While we are at it, second patch makes the global rate limit
per net-ns and disabled by default.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Because per host rate limiting has been proven problematic (side channel
attacks can be based on it), per host rate limiting of challenge acks ideally
should be per netns and turned off by default.
This is a long due followup of following commits:
083ae308280d ("tcp: enable per-socket rate limiting of all 'challenge acks'")
f2b2c582e824 ("tcp: mitigate ACK loops for connections as tcp_sock")
75ff39ccc1bd ("tcp: make challenge acks less predictable")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Jason Baron <[email protected]>
Acked-by: Neal Cardwell <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
challenge_timestamp can be read an written by concurrent threads.
This was expected, but we need to annotate the race to avoid potential issues.
Following patch moves challenge_timestamp and challenge_count
to per-netns storage to provide better isolation.
Fixes: 354e4aa391ed ("tcp: RFC 5961 5.2 Blind Data Injection Attack Mitigation")
Reported-by: syzbot <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Acked-by: Neal Cardwell <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
In case the source port cannot be decoded, print the warning only once. This
still brings attention to the user and does not spam the logs at the same time.
Signed-off-by: Kurt Kanzenbach <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
__mkroute_input() uses fib_validate_source() to trigger an icmp redirect.
My understanding is that fib_validate_source() is used to know if the src
address and the gateway address are on the same link. For that,
fib_validate_source() returns 1 (same link) or 0 (not the same network).
__mkroute_input() is the only user of these positive values, all other
callers only look if the returned value is negative.
Since the below patch, fib_validate_source() didn't return anymore 1 when
both addresses are on the same network, because the route lookup returns
RT_SCOPE_LINK instead of RT_SCOPE_HOST. But this is, in fact, right.
Let's adapat the test to return 1 again when both addresses are on the same
link.
CC: [email protected]
Fixes: 747c14307214 ("ip: fix dflt addr selection for connected nexthop")
Reported-by: kernel test robot <[email protected]>
Reported-by: Heng Qi <[email protected]>
Signed-off-by: Nicolas Dichtel <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
anon_vma->degree tracks the combined number of child anon_vmas and VMAs
that use the anon_vma as their ->anon_vma.
anon_vma_clone() then assumes that for any anon_vma attached to
src->anon_vma_chain other than src->anon_vma, it is impossible for it to
be a leaf node of the VMA tree, meaning that for such VMAs ->degree is
elevated by 1 because of a child anon_vma, meaning that if ->degree
equals 1 there are no VMAs that use the anon_vma as their ->anon_vma.
This assumption is wrong because the ->degree optimization leads to leaf
nodes being abandoned on anon_vma_clone() - an existing anon_vma is
reused and no new parent-child relationship is created. So it is
possible to reuse an anon_vma for one VMA while it is still tied to
another VMA.
This is an issue because is_mergeable_anon_vma() and its callers assume
that if two VMAs have the same ->anon_vma, the list of anon_vmas
attached to the VMAs is guaranteed to be the same. When this assumption
is violated, vma_merge() can merge pages into a VMA that is not attached
to the corresponding anon_vma, leading to dangling page->mapping
pointers that will be dereferenced during rmap walks.
Fix it by separately tracking the number of child anon_vmas and the
number of VMAs using the anon_vma as their ->anon_vma.
Fixes: 7a3ef208e662 ("mm: prevent endless growth of anon_vma hierarchy")
Cc: [email protected]
Acked-by: Michal Hocko <[email protected]>
Acked-by: Vlastimil Babka <[email protected]>
Signed-off-by: Jann Horn <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
When the GSO splitting feature of sch_cake is enabled, GSO superpackets
will be broken up and the resulting segments enqueued in place of the
original skb. In this case, CAKE calls consume_skb() on the original skb,
but still returns NET_XMIT_SUCCESS. This can confuse parent qdiscs into
assuming the original skb still exists, when it really has been freed. Fix
this by adding the __NET_XMIT_STOLEN flag to the return value in this case.
Fixes: 0c850344d388 ("sch_cake: Conditionally split GSO segments")
Signed-off-by: Toke Høiland-Jørgensen <[email protected]>
Reported-by: [email protected] # ZDI-CAN-18231
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Restrict the ucode loading check to avoid frontdoor loading error.
Signed-off-by: Chengming Gui <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This is the result of `sort tools/testing/selftests/net/.gitignore`, but
preserving the comment at the top.
Suggested-by: Jakub Kicinski <[email protected]>
Signed-off-by: Axel Rasmussen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Change occurrences of "it's" that are possessive to "its"
so that they don't read as "it is".
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Paolo Abeni <[email protected]>
Cc: Jiri Pirko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
strp_init() is called just a few lines above this csk->sk_user_data
check, it also initializes strp->work etc., therefore, it is
unnecessary to call strp_done() to cancel the freshly initialized
work.
And if sk_user_data is already used by KCM, psock->strp should not be
touched, particularly strp->work state, so we need to move strp_init()
after the csk->sk_user_data check.
This also makes a lockdep warning reported by syzbot go away.
Reported-and-tested-by: [email protected]
Reported-by: [email protected]
Fixes: e5571240236c ("kcm: Check if sk_user_data already set in kcm_attach")
Fixes: dff8baa26117 ("kcm: Call strp_stop before strp_done in kcm_attach")
Cc: Tom Herbert <[email protected]>
Signed-off-by: Cong Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This patch adds logic to compute the MDIO period based on
the i1clk, and thereafter write the MDIO period into the YU
MDIO config register. The i1clk resource from the ACPI table
is used to provide addressing to YU bootrecord PLL registers.
The values in these registers are used to compute MDIO period.
If the i1clk resource is not present in the ACPI table, then
the current default hardcorded value of 430Mhz is used.
The i1clk clock value of 430MHz is only accurate for boards
with BF2 mid bin and main bin SoCs. The BF2 high bin SoCs
have i1clk = 500MHz, but can support a slower MDIO period.
Fixes: f92e1869d74e ("Add Mellanox BlueField Gigabit Ethernet driver")
Reviewed-by: Asmaa Mnebhi <[email protected]>
Signed-off-by: David Thompson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This reverts commit 35b0fac808b95eea1212f8860baf6ad25b88b087. Alexander
reports that it causes boot failures on i.MX8M Plus based boards
(specifically imx8mp-tqma8mpql-mba8mpxl.dts).
Reported-by: Alexander Stein <[email protected]>
Cc: Chen-Yu Tsai <[email protected]>
Fixes: 35b0fac808b9 ("clk: core: Honor CLK_OPS_PARENT_ENABLE for clk gate ops")
Link: https://lore.kernel.org/r/12115951.O9o76ZdvQC@steina-w
Signed-off-by: Stephen Boyd <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull fscache/cachefiles fixes from David Howells:
- Fix kdoc on fscache_use/unuse_cookie().
- Fix the error returned by cachefiles_ondemand_copen() from an upcall
result.
- Fix the distribution of requests in on-demand mode in cachefiles to
be fairer by cycling through them rather than picking the one with
the lowest ID each time (IDs being reused).
* tag 'fscache-fixes-20220831' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
cachefiles: make on-demand request distribution fairer
cachefiles: fix error return code in cachefiles_ondemand_copen()
fscache: fix misdocumented parameter
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- NULL pointer dereference fix for Steam driver (Lee Jones)
- memory leak fix for hidraw (Karthik Alapati)
- regression fix for functionality of some UCLogic tables (Benjamin
Tissoires)
- a few new device IDs and device-specific quirks
* tag 'for-linus-2022083101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: nintendo: fix rumble worker null pointer deref
HID: intel-ish-hid: ipc: Add Meteor Lake PCI device ID
HID: input: fix uclogic tablets
HID: Add Apple Touchbar on T2 Macs in hid_have_special_driver list
HID: add Lenovo Yoga C630 battery quirk
HID: AMD_SFH: Add a DMI quirk entry for Chromebooks
HID: thrustmaster: Add sparco wheel and fix array length
hid: intel-ish-hid: ishtp: Fix ishtp client sending disordered message
HID: ishtp-hid-clientHID: ishtp-hid-client: Fix comment typo
HID: asus: ROG NKey: Ignore portion of 0x5a report
HID: hidraw: fix memory leak in hidraw_release()
HID: steam: Prevent NULL pointer dereference in steam_{recv,send}_report
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"Fix a boot performance regression due to an unnecessary dependency on
XOR_BLOCKS"
* tag 'v6.0-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: lib - remove unneeded selection of XOR_BLOCKS
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull LSM support for IORING_OP_URING_CMD from Paul Moore:
"Add SELinux and Smack controls to the io_uring IORING_OP_URING_CMD.
These are necessary as without them the IORING_OP_URING_CMD remains
outside the purview of the LSMs (Luis' LSM patch, Casey's Smack patch,
and my SELinux patch). They have been discussed at length with the
io_uring folks, and Jens has given his thumbs-up on the relevant
patches (see the commit descriptions).
There is one patch that is not strictly necessary, but it makes
testing much easier and is very trivial: the /dev/null
IORING_OP_URING_CMD patch."
* tag 'lsm-pr-20220829' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
Smack: Provide read control for io_uring_cmd
/dev/null: add IORING_OP_URING_CMD support
selinux: implement the security_uring_cmd() LSM hook
lsm,io_uring: add LSM hooks for the new uring_cmd file op
|
|
By using 16-bit I/O on the GPIO peripheral, which is apparently not safe
on MIPS, the IMR can end up containing garbage. This then results in
interrupt triggers for lines that don't have an interrupt handler
associated. The irq_desc lookup fails, and the ISR will not be cleared,
keeping the CPU busy until reboot, or until another IMR operation
restores the correct value. This situation appears to happen very
rarely, for < 0.5% of IMR writes.
Instead of using 8-bit or 16-bit I/O operations on the 32-bit memory
mapped peripheral registers, switch to using 32-bit I/O only, operating
on the entire bank for all single bit line settings. For 2-bit line
settings, with 16-bit port values, stick to manual (un)packing.
This issue has been seen on RTL8382M (HPE 1920-16G), RTL8391M (Netgear
GS728TP v2), and RTL8393M (D-Link DGS-1210-52 F3, Zyxel GS1900-48).
Reported-by: Luiz Angelo Daros de Luca <[email protected]> # DGS-1210-52
Reported-by: Birger Koblitz <[email protected]> # GS728TP
Reported-by: Jan Hoffmann <[email protected]> # 1920-16G
Fixes: 0d82fb1127fb ("gpio: Add Realtek Otto GPIO support")
Signed-off-by: Sander Vanheule <[email protected]>
Cc: Paul Cercueil <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
For now, enqueuing and dequeuing on-demand requests all start from
idx 0, this makes request distribution unfair. In the weighty
concurrent I/O scenario, the request stored in higher idx will starve.
Searching requests cyclically in cachefiles_ondemand_daemon_read,
makes distribution fairer.
Fixes: c8383054506c ("cachefiles: notify the user daemon when looking up cookie")
Reported-by: Yongqing Li <[email protected]>
Signed-off-by: Xin Yin <[email protected]>
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Jeffle Xu <[email protected]>
Reviewed-by: Gao Xiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]/ # v1
Link: https://lore.kernel.org/r/[email protected]/ # v2
|
|
The cache_size field of copen is specified by the user daemon.
If cache_size < 0, then the OPEN request is expected to fail,
while copen itself shall succeed. However, returning 0 is indeed
unexpected when cache_size is an invalid error code.
Fix this by returning error when cache_size is an invalid error code.
Changes
=======
v4: update the code suggested by Dan
v3: update the commit log suggested by Jingbo.
Fixes: c8383054506c ("cachefiles: notify the user daemon when looking up cookie")
Signed-off-by: Sun Ke <[email protected]>
Suggested-by: Jeffle Xu <[email protected]>
Suggested-by: Dan Carpenter <[email protected]>
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Gao Xiang <[email protected]>
Reviewed-by: Jingbo Xu <[email protected]>
Reviewed-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]/ # v2
Link: https://lore.kernel.org/r/[email protected]/ # v3
Link: https://lore.kernel.org/r/[email protected]/ # v4
|
|
This patch fixes two warnings generated by make docs. The functions
fscache_use_cookie and fscache_unuse_cookie, both have a parameter
named cookie. But they are documented with the name "object" with
unclear description. Which generates the warning when creating docs.
This commit will replace the currently misdocumented parameter names
with the correct ones while adding proper descriptions.
CC: Randy Dunlap <[email protected]>
Signed-off-by: Khalid Masum <[email protected]>
Signed-off-by: David Howells <[email protected]>
Link: https://lore.kernel.org/r/[email protected]/ # v1
Link: https://lore.kernel.org/r/[email protected]/ # v2
Link: https://lore.kernel.org/r/880d7d25753fb326ee17ac08005952112fcf9bdb.1657360984.git.mchehab@kernel.org/ # Mauro's version
|
|
At least one older CH341 appears to have the RX timer enable bit
inverted so that setting it disables the RX timer and prevents the FIFO
from emptying until it is full.
Only set the RX timer enable bit for devices with version newer than
0x27 (even though this probably affects all pre-0x30 devices).
Reported-by: Jonathan Woithe <[email protected]>
Tested-by: Jonathan Woithe <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Fixes: 4e46c410e050 ("USB: serial: ch341: reinitialize chip on reconfiguration")
Cc: [email protected] # 4.10
Signed-off-by: Johan Hovold <[email protected]>
|
|
Disable LCR updates for pre-0x30 devices which use a different (unknown)
protocol for line control and where the current register write causes
the next received character to be lost.
Note that updating LCR using the INIT command has no effect on these
devices either.
Reported-by: Jonathan Woithe <[email protected]>
Tested-by: Jonathan Woithe <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Fixes: 4e46c410e050 ("USB: serial: ch341: reinitialize chip on reconfiguration")
Fixes: 55fa15b5987d ("USB: serial: ch341: fix baud rate and line-control handling")
Cc: [email protected] # 4.10
Signed-off-by: Johan Hovold <[email protected]>
|
|
As reported by Zhouyi Zhou, WRITE_ONCE() is not atomic
as expected when KASAN or KCSAN are compiled in.
Fix it by re-implementing it using inline assembly.
Fixes: 077fc62b2b66 ("powerpc/irq: remove inline assembly in hard_irq_disable macro")
Reported-by: Zhouyi Zhou <[email protected]>
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/a8298991b3df049a54ee8e558838e34265812014.1661272586.git.christophe.leroy@csgroup.eu
|
|
The function neigh_timer_handler() is a timer handler that runs in an
atomic context. When used by rocker, neigh_timer_handler() calls
"kzalloc(.., GFP_KERNEL)" that may sleep. As a result, the sleep in
atomic context bug will happen. One of the processes is shown below:
ofdpa_fib4_add()
...
neigh_add_timer()
(wait a timer)
neigh_timer_handler()
neigh_release()
neigh_destroy()
rocker_port_neigh_destroy()
rocker_world_port_neigh_destroy()
ofdpa_port_neigh_destroy()
ofdpa_port_ipv4_neigh()
kzalloc(sizeof(.., GFP_KERNEL) //may sleep
This patch changes the gfp_t parameter of kzalloc() from GFP_KERNEL to
GFP_ATOMIC in order to mitigate the bug.
Fixes: 00fc0c51e35b ("rocker: Change world_ops API and implementation to be switchdev independant")
Signed-off-by: Duoming Zhou <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add the device id for Decagon Devices USB Cable Adapter.
Link: https://lore.kernel.org/r/trinity-819f9db2-d3e1-40e9-a669-9c245817c046-1661523546680@msvc-mesg-web108
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
|
|
The regcache sync will set the cache_bypass = true, at that
time, when there is regmap write operation, it will bypass
the regmap cache, then the regcache sync will write back the
value from cache to register, which is not as our expectation.
Though regmap already use its internal lock to avoid such issue,
but this driver force disable the regmap internal lock in its
regmap config: disable_locking = true
To avoid this issue, use the driver's own lock to do the protect
in system PM.
Fixes: b76574300504 ("gpio: pca953x: Restore registers after suspend/resume cycle")
Signed-off-by: Haibo Chen <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
This reverts commit 3d5f70949f1b1168fbb17d06eb5c57e984c56c58.
The quirk does not work properly, more work is needed to determine what
should be done here.
Reported-by: Oliver Neukum <[email protected]>
Cc: Jean-Francois Le Fillatre <[email protected]>
Cc: stable <[email protected]>
Fixes: 3d5f70949f1b ("usb: add quirks for Lenovo OneLink+ Dock")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Don't just print a warning. Clean up and return an error as well.
Fixes: c8349639324a ("net: lan966x: Add FDMA functionality")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Horatiu Vultur <[email protected]>
Link: https://lore.kernel.org/r/YwjgDm/SVd5c1tQU@kili
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When running `ethtool -p` with the old management firmware,
the management firmware resource is not correctly released,
which causes firmware related malfunction: all the access
to management firmware hangs.
It releases the management firmware resource when set id
mode operation is not supported.
Fixes: ccb9bc1dfa44 ("nfp: add 'ethtool --identify' support")
Signed-off-by: Gao Xiao <[email protected]>
Reviewed-by: Louis Peens <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
Reviewed-by: Jesse Brandeburg <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan
Stefan Schmidt says:
====================
ieee802154 for net 2022-08-29
- repeated word fix from Jilin Yuan.
- missed return code setting in the cc2520 driver by Li Qiong.
- fixing a potential race in by defering the workqueue destroy
in the adf7242 driver by Lin Ma.
- fixing a long standing problem in the mac802154 rx path to match
corretcly by Miquel Raynal.
* tag 'ieee802154-for-net-2022-08-29' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan:
ieee802154: cc2520: add rc code in cc2520_tx()
net: mac802154: Fix a condition in the receive path
net/ieee802154: fix repeated words in comments
ieee802154/adf7242: defer destroy_workqueue call
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The same GPIO line can be shared by multiple phys for the coma mode pin.
If that is the case then, all the other phys that share the same line
will failed to be probed because the access to the gpio line is not
non-exclusive.
Fix this by making access to the gpio line to be nonexclusive using flag
GPIOD_FLAGS_BIT_NONEXCLUSIVE. This allows all the other PHYs to be
probed.
Fixes: 738871b09250ee ("net: phy: micrel: add coma mode GPIO")
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Horatiu Vultur <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Fix wording in comments for the notifications coalescing feature.
Signed-off-by: Alvaro Karsz <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
TCP_FIN_WAIT2 and TCP_LAST_ACK were not handled, the connection is closing
so we can ignore them and avoid printing the "unhandled state"
warning message.
[ 1298.852386] nvmet_tcp: queue 2 unhandled state 5
[ 1298.879112] nvmet_tcp: queue 7 unhandled state 5
[ 1298.884253] nvmet_tcp: queue 8 unhandled state 5
[ 1298.889475] nvmet_tcp: queue 9 unhandled state 5
v2: Do not call nvmet_tcp_schedule_release_queue(), just ignore
the fin_wait2 and last_ack states.
Signed-off-by: Maurizio Lombardi <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
|
|
There's a goto missing in nvmet_setup_auth(), causing a kernel oops
when nvme_auth_extract_key() fails.
Reported-by: Tal Lossos <[email protected]>
Signed-off-by: Hannes Reinecke <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
|
|
Lexar NM610 reports bogus eui64 values that appear to be the same across
all drives. Quirk them out so they are not marked as "non globally unique"
duplicates.
Signed-off-by: Shyamin Ayesh <[email protected]>
[patch formatting]
Signed-off-by: Keith Busch <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
|
|
In some cases of failure (dialect mismatches) in SMB2_negotiate(), after
the request is sent, the checks would return -EIO when they should be
rather setting rc = -EIO and jumping to neg_exit to free the response
buffer from mempool.
Signed-off-by: Enzo Matsumiya <[email protected]>
Cc: [email protected]
Reviewed-by: Ronnie Sahlberg <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
When doing insert range and collapse range we should be
writing out the cached pages for the ranges affected but not
the whole file.
Fixes: c3a72bb21320 ("smb3: Move the flush out of smb2_copychunk_range() into its callers")
Cc: [email protected]
Reviewed-by: Paulo Alcantara (SUSE) <[email protected]>
Reviewed-by: David Howells <[email protected]>
Signed-off-by: Steve French <[email protected]>
|