aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-07-06arm64: dts: qcom: msm8996: Disable SS instance in Parkmode for USBKrishna Kurapati1-0/+1
For Gen-1 targets like MSM8996, it is seen that stressing out the controller in host mode results in HC died error: xhci-hcd.12.auto: xHCI host not responding to stop endpoint command xhci-hcd.12.auto: xHCI host controller not responding, assume dead xhci-hcd.12.auto: HC died; cleaning up And at this instant only restarting the host mode fixes it. Disable SuperSpeed instance in park mode for MSM8996 to mitigate this issue. Cc: [email protected] Fixes: 1e39255ed29d ("arm64: dts: msm8996: Add device node for qcom,dwc3") Signed-off-by: Krishna Kurapati <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-06arm64: dts: qcom: sm6350: Disable SS instance in Parkmode for USBKrishna Kurapati1-0/+1
For Gen-1 targets like SM6350, it is seen that stressing out the controller in host mode results in HC died error: xhci-hcd.12.auto: xHCI host not responding to stop endpoint command xhci-hcd.12.auto: xHCI host controller not responding, assume dead xhci-hcd.12.auto: HC died; cleaning up And at this instant only restarting the host mode fixes it. Disable SuperSpeed instance in park mode for SM6350 to mitigate this issue. Cc: [email protected] Fixes: 23737b9557fe ("arm64: dts: qcom: sm6350: Add USB1 nodes") Signed-off-by: Krishna Kurapati <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-06arm64: dts: qcom: sm6115: Disable SS instance in Parkmode for USBKrishna Kurapati1-0/+1
For Gen-1 targets like SM6115, it is seen that stressing out the controller in host mode results in HC died error: xhci-hcd.12.auto: xHCI host not responding to stop endpoint command xhci-hcd.12.auto: xHCI host controller not responding, assume dead xhci-hcd.12.auto: HC died; cleaning up And at this instant only restarting the host mode fixes it. Disable SuperSpeed instance in park mode for SM6115 to mitigate this issue. Cc: [email protected] Fixes: 97e563bf5ba1 ("arm64: dts: qcom: sm6115: Add basic soc dtsi") Signed-off-by: Krishna Kurapati <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-06arm64: dts: qcom: sdm630: Disable SS instance in Parkmode for USBKrishna Kurapati1-0/+1
For Gen-1 targets like SDM630, it is seen that stressing out the controller in host mode results in HC died error: xhci-hcd.12.auto: xHCI host not responding to stop endpoint command xhci-hcd.12.auto: xHCI host controller not responding, assume dead xhci-hcd.12.auto: HC died; cleaning up And at this instant only restarting the host mode fixes it. Disable SuperSpeed instance in park mode for SDM630 to mitigate this issue. Cc: [email protected] Fixes: c65a4ed2ea8b ("arm64: dts: qcom: sdm630: Add USB configuration") Signed-off-by: Krishna Kurapati <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-06arm64: dts: qcom: msm8998: Disable SS instance in Parkmode for USBKrishna Kurapati1-0/+1
For Gen-1 targets like MSM8998, it is seen that stressing out the controller in host mode results in HC died error: xhci-hcd.12.auto: xHCI host not responding to stop endpoint command xhci-hcd.12.auto: xHCI host controller not responding, assume dead xhci-hcd.12.auto: HC died; cleaning up And at this instant only restarting the host mode fixes it. Disable SuperSpeed instance in park mode for MSM8998 to mitigate this issue. Cc: [email protected] Fixes: 026dad8f5873 ("arm64: dts: qcom: msm8998: Add USB-related nodes") Signed-off-by: Krishna Kurapati <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-06arm64: dts: qcom: ipq8074: Disable SS instance in Parkmode for USBKrishna Kurapati1-0/+2
For Gen-1 targets like IPQ8074, it is seen that stressing out the controller in host mode results in HC died error: xhci-hcd.12.auto: xHCI host not responding to stop endpoint command xhci-hcd.12.auto: xHCI host controller not responding, assume dead xhci-hcd.12.auto: HC died; cleaning up And at this instant only restarting the host mode fixes it. Disable SuperSpeed instance in park mode for IPQ8074 to mitigate this issue. Cc: [email protected] Fixes: 5e09bc51d07b ("arm64: dts: ipq8074: enable USB support") Signed-off-by: Krishna Kurapati <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-06arm64: dts: qcom: ipq6018: Disable SS instance in Parkmode for USBKrishna Kurapati1-0/+1
For Gen-1 targets like IPQ6018, it is seen that stressing out the controller in host mode results in HC died error: xhci-hcd.12.auto: xHCI host not responding to stop endpoint command xhci-hcd.12.auto: xHCI host controller not responding, assume dead xhci-hcd.12.auto: HC died; cleaning up And at this instant only restarting the host mode fixes it. Disable SuperSpeed instance in park mode for IPQ6018 to mitigate this issue. Cc: [email protected] Fixes: 20bb9e3dd2e4 ("arm64: dts: qcom: ipq6018: add usb3 DT description") Signed-off-by: Krishna Kurapati <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-06arm64: dts: qcom: x1e80100: add Lenovo Thinkpad Yoga slim 7x devicetreeSrinivas Kandagatla2-0/+930
Add an initial devicetree for the Lenovo Yoga slim 7x with support for Display, usb, keyboard, touchpad, touchscreen, PMICs, speaker audio, gpu, NVMe and remoteprocs. Signed-off-by: Srinivas Kandagatla <[email protected]> Tested-by: Rob Clark <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-06dt-bindings: arm: qcom: Add Lenovo Yoga Slim 7xSrinivas Kandagatla1-0/+1
Document the x1e80100 based Lenovo Yoga Slim 7x laptop. Signed-off-by: Srinivas Kandagatla <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-02dt-bindings: arm: qcom: Document samsung,ms013gRaymond Hackley1-0/+1
Document samsung,ms013g for Galaxy Grand 2. Signed-off-by: Raymond Hackley <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-02arm64: dts: qcom: Add device tree for ASUS Vivobook S 15Xilin Wu2-0/+617
ASUS Vivobook S 15 is a laptop based on the Qualcomm Snapdragon X Elite SoC (X1E78100). Add the device tree for the laptop with support for the following features: - CPU frequency scaling up to 3.4GHz - NVMe storage on PCIe 6a (capable of Gen4x4, currently limited to Gen4x2) - Keyboard and touchpad - WCN7850 Wi-Fi - Two Type-C ports on the left side (USB3 only in one orientation) - internal eDP display - ADSP and CDSP remoteprocs Further details could be found in the cover letter. Signed-off-by: Xilin Wu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-02dt-bindings: arm: qcom: Add ASUS Vivobook S 15Xilin Wu1-0/+1
Add the compatible for this device. Signed-off-by: Xilin Wu <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-02arm64: dts: qcom: qrb4210-rb2: Correct max current draw for VBUSDang Huynh1-1/+1
According to downstream sources, maximum current for PMI632 VBUS is 1A. Taken from msm-4.19 (631561973a034e46ccacd0e53ef65d13a40d87a4) Line 685-687 in drivers/power/supply/qcom/qpnp-smb5.c Fixes: a06a2f12f9e2 ("arm64: dts: qcom: qrb4210-rb2: enable USB-C port handling") Reviewed-by: Luca Weiss <[email protected]> Signed-off-by: Dang Huynh <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-02arm64: dts: qcom: msm8998: add venus nodePierre-Hugues Husson1-0/+48
Now that the venus clocks are fixed, we can add the DT node. Signed-off-by: Pierre-Hugues Husson <[email protected]> Signed-off-by: Marc Gonzalez <[email protected]> Reviewed-by: Bryan O'Donoghue <[email protected]> Acked-by: Vikash Garodia <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-01arm64: dts: qcom: sa8775p-ride-r3: add new board fileBartosz Golaszewski2-0/+48
Revision 3 of the sa8775p-ride board uses a different PHY for the two ethernet ports and supports 2.5G speed. Create a new file for the board reflecting the changes. Signed-off-by: Bartosz Golaszewski <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-01arm64: dts: qcom: move common parts for sa8775p-ride variants into a .dtsiBartosz Golaszewski2-813/+835
In order to support multiple revisions of the sa8775p-ride board, create a .dtsi containing the common parts and split out the ethernet bits into the actual board file as they will change in revision 3. Signed-off-by: Bartosz Golaszewski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-01dt-bindings: arm: qcom: add sa8775p-ride Rev 3Bartosz Golaszewski1-0/+1
Document the compatible for revision 3 of the sa8775p-ride board. Signed-off-by: Bartosz Golaszewski <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-01arm64: dts: qcom: sm8550-qrd: add port mapping to speakersKrzysztof Kozlowski1-0/+2
Add appropriate mappings of Soundwire ports of WSA8845 speaker. This solves second (south) speaker sound distortions when playing audio. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-01arm64: dts: qcom: sm8550-mtp: add port mapping to speakersKrzysztof Kozlowski1-0/+2
Add appropriate mappings of Soundwire ports of WSA8845 speaker. This solves second (right) speaker sound distortions when playing audio. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-01arm64: dts: qcom: sm8550-hdk: add port mapping to speakersKrzysztof Kozlowski1-0/+2
Add appropriate mappings of Soundwire ports of WSA8845 speaker. This solves second (south) speaker sound distortions when playing audio. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-01arm64: dts: qcom: sm8650-qrd: add port mapping to speakersNeil Armstrong1-0/+20
Add appropriate mappings of Soundwire ports of WSA8845 speaker to correctly map the Speaker ports to the WSA macro ports. Signed-off-by: Neil Armstrong <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/20240627-topic-sm8650-upstream-was-port-mapping-v1-3-4700bcc2489a@linaro.org Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-01arm64: dts: qcom: sm8650-mtp: add port mapping to speakersNeil Armstrong1-0/+20
Add appropriate mappings of Soundwire ports of WSA8845 speaker to correctly map the Speaker ports to the WSA macro ports. Signed-off-by: Neil Armstrong <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/20240627-topic-sm8650-upstream-was-port-mapping-v1-2-4700bcc2489a@linaro.org Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-01arm64: dts: qcom: sm8650-hdk: add port mapping to speakersNeil Armstrong1-0/+20
Add appropriate mappings of Soundwire ports of WSA8845 speaker to correctly map the Speaker ports to the WSA macro ports. Signed-off-by: Neil Armstrong <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/20240627-topic-sm8650-upstream-was-port-mapping-v1-1-4700bcc2489a@linaro.org Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-01arm64: dts: qcom: sm7225-fairphone-fp4: Name the regulatorsLuca Weiss1-0/+34
Without explicitly specifying names for the regulators they are named based on the DeviceTree node name. This results in multiple regulators with the same name, making debug prints and regulator_summary impossible to reason about. Signed-off-by: Luca Weiss <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-01arm64: dts: qcom: pm8916: correct thermal zone nameDmitry Baryshkov1-1/+1
Correct the name for the thermal zone on PM8916 PMIC. I ended up with c&p mistake, which wasn't noticed until the patch got merged. Reported-by: Konrad Dybcio <[email protected]> Fixes: b7a28d8a7b80 ("arm64: dts: qcom: pm8916: add temp-alarm thermal zone") Signed-off-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-01arm64: dts: qcom: x1e80100: Add gpu supportAkhil P Oommen1-0/+195
Add the necessary dt nodes for gpu support in X1E80100. Signed-off-by: Akhil P Oommen <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-01arm64: dts: qcom: x1e80100: Fix USB HS PHY 0.8V supplyAbel Vesa2-6/+6
According to the power grid documentation, the 0.8v HS PHY shared regulator is actually LDO3 from PM8550ve id J. Fix both CRD and QCP boards. Fixes: d7e03cce0400 ("arm64: dts: qcom: x1e80100-crd: Enable more support") Signed-off-by: Abel Vesa <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/20240629-x1e80100-dts-fix-hsphy-0-8v-supplies-v1-1-de99ee030b27@linaro.org Signed-off-by: Bjorn Andersson <[email protected]>
2024-06-27arm64: dts: qcom: qcs6490-rb3gen2: enable hdmi bridgeVenkata Prahlad Valluru1-0/+94
Rb3Gen2 has a lt9611uxc DSI-to-HDMI bridge on i2c0, with reset gpio from pm7250b gpio2 and irq gpio from tlmm gpio24. Bridge supplies are Vdd connected to input supply directly and vcc to L11c. Enable HDMI output, bridge and corresponding DSI output. Signed-off-by: Venkata Prahlad Valluru <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-06-25arm64: dts: qcom: sm6115: add resets for sdhc_1Caleb Connolly1-0/+2
These are documented and supported everywhere, but not described in DT. Add them. Signed-off-by: Caleb Connolly <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-06-25arm64: dts: qcom: x1e80100: Add fastrpc nodesSibi Sankar1-0/+144
Add fastrpc nodes for ADSP and CDSP on X1E80100 SoC. Signed-off-by: Sibi Sankar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-06-25arm64: dts: qcom: x1e80100: Add BWMONsSibi Sankar1-0/+123
Add the CPU and LLCC BWMONs on X1E80100 SoCs. Tested-by: Konrad Dybcio <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Sibi Sankar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-06-25arm64: dts: qcom: ipq6018: add sdhci nodeChukun Pan1-0/+19
Add node to support mmc controller inside of IPQ6018. This controller supports both eMMC and SD cards. Tested with: eMMC (HS200) SD Card (SDR50/SDR104) Signed-off-by: Chukun Pan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-06-25arm64: dts: qcom: sc7280: Add clocks for QOS configurationOdelu Kukatla1-0/+3
Add clocks which need to be enbaled for configuring QoS on sc7280. Signed-off-by: Odelu Kukatla <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Acked-by: Georgi Djakov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-06-25arm64: dts: qcom: sm8650: Add video and camera clock controllersJagadeesh Kona1-0/+26
Add device nodes for video and camera clock controllers on Qualcomm SM8650 platform. Signed-off-by: Jagadeesh Kona <[email protected]> Reviewed-by: Vladimir Zapolskiy <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-06-25Merge branch '[email protected]' into arm64-for-6.11Bjorn Andersson8-8/+3979
Merge the SM8650 video and clock controller drivers to gain access to the constants from the DeviceTree binding.
2024-06-25clk: qcom: camcc-sm8650: Add SM8650 camera clock controller driverJagadeesh Kona3-0/+3600
Add support for the camera clock controller for camera clients to be able to request for camcc clocks on SM8650 platform. Signed-off-by: Jagadeesh Kona <[email protected]> Reviewed-by: Bryan O'Donoghue <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Vladimir Zapolskiy <[email protected]> Tested-by: Vladimir Zapolskiy <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-06-25dt-bindings: clock: qcom: Add SM8650 camera clock controllerJagadeesh Kona2-0/+198
Add device tree bindings for the camera clock controller on Qualcomm SM8650 platform. Signed-off-by: Jagadeesh Kona <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Acked-by: Vladimir Zapolskiy <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-06-25dt-bindings: clock: qcom: Update the order of SC8280XP camcc headerJagadeesh Kona1-2/+2
Update the order of SC8280XP camcc header file in SM8450 camcc bindings. Signed-off-by: Jagadeesh Kona <[email protected]> Reviewed-by: Bryan O'Donoghue <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-06-25clk: qcom: videocc-sm8550: Add SM8650 video clock controllerJagadeesh Kona1-4/+149
Add support to the SM8650 video clock controller by extending the SM8550 video clock controller, which is mostly identical but SM8650 has few additional clocks and minor differences. Signed-off-by: Jagadeesh Kona <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-06-25clk: qcom: videocc-sm8550: Add support for videocc XO clk aresJagadeesh Kona1-1/+2
Add support for videocc XO clk ares for consumer drivers to be able to request this reset. Fixes: f53153a37969 ("clk: qcom: videocc-sm8550: Add video clock controller driver for SM8550") Signed-off-by: Jagadeesh Kona <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-06-25dt-bindings: clock: qcom: Add SM8650 video clock controllerJagadeesh Kona2-1/+28
SM8650 video clock controller has most clocks same as SM8450, but it also has few additional clocks and resets. Add device tree bindings for the video clock controller on Qualcomm SM8650 platform by defining these additional clocks and resets on top of SM8450. Signed-off-by: Jagadeesh Kona <[email protected]> Reviewed-by: Bryan O'Donoghue <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Vladimir Zapolskiy <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-06-25dt-bindings: clock: qcom: Update SM8450 videocc header file nameJagadeesh Kona1-1/+1
Correct the videocc header file name in SM8450 videocc bindings. Fixes: 1e910b2ba0ed ("dt-bindings: clock: qcom: Add SM8450 video clock controller") Signed-off-by: Jagadeesh Kona <[email protected]> Reviewed-by: Bryan O'Donoghue <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-06-25arm64: dts: qcom: pm8916: add temp-alarm thermal zoneDmitry Baryshkov1-1/+30
Define the themal zones using the temperature values in stage1 for this platform so that the spmi-temp-alarm driver becomes active. Signed-off-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Bryan O'Donoghue <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-06-25arm64: dts: qcom: x1e80100-qcp: add audio supportSrinivas Kandagatla1-0/+155
Add audio support to QCP platform which includes 2 x Speakers Headset Mic and Headset support. Signed-off-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-06-23arm64: dts: qcom: sa8775p: add a dedicated memory carveout for TZBartosz Golaszewski1-0/+7
Add a 20MB reserved memory region for use by SCM calls. Signed-off-by: Bartosz Golaszewski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-06-23arm64: dts: qcom: msm8976: Use mboxes in smsm nodeLuca Weiss1-3/+1
With the smsm bindings and driver finally supporting mboxes, switch to that and stop using apcs as syscon. Signed-off-by: Luca Weiss <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-06-23arm64: dts: qcom: msm8953: Use mboxes in smsm nodeLuca Weiss1-2/+1
With the smsm bindings and driver finally supporting mboxes, switch to that and stop using apcs as syscon. Signed-off-by: Luca Weiss <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-06-23arm64: dts: qcom: msm8939: Use mboxes in smsm nodeLuca Weiss1-2/+1
With the smsm bindings and driver finally supporting mboxes, switch to that and stop using apcs as syscon. Signed-off-by: Luca Weiss <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-06-23arm64: dts: qcom: msm8916: Use mboxes in smsm nodeLuca Weiss1-2/+1
With the smsm bindings and driver finally supporting mboxes, switch to that and stop using apcs as syscon. Signed-off-by: Luca Weiss <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-06-23arm64: dts: qcom: x1e80100: Enable tsens and thermal zone nodesRajendra Nayak1-0/+1214
Add tsens and thermal zones nodes for x1e80100 SoC. Signed-off-by: Rajendra Nayak <[email protected]> Signed-off-by: Abel Vesa <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Tested-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.