aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-02-11IB/rdmavt: Reset all QPs when the device is shut downKaike Wan1-33/+51
When the hfi1 device is shut down during a system reboot, it is possible that some QPs might have not not freed by ULPs. More requests could be post sent and a lingering timer could be triggered to schedule more packet sends, leading to a crash: BUG: unable to handle kernel NULL pointer dereference at 0000000000000102 IP: [ffffffff810a65f2] __queue_work+0x32/0x3c0 PGD 0 Oops: 0000 1 SMP Modules linked in: nvmet_rdma(OE) nvmet(OE) nvme(OE) dm_round_robin nvme_rdma(OE) nvme_fabrics(OE) nvme_core(OE) pal_raw(POE) pal_pmt(POE) pal_cache(POE) pal_pile(POE) pal(POE) pal_compatible(OE) rpcrdma sunrpc ib_isert iscsi_target_mod target_core_mod ib_iser libiscsi scsi_transport_iscsi ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm mlx4_ib sb_edac edac_core intel_powerclamp coretemp intel_rapl iosf_mbi kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd iTCO_wdt iTCO_vendor_support mxm_wmi ipmi_ssif pcspkr ses enclosure joydev scsi_transport_sas i2c_i801 sg mei_me lpc_ich mei ioatdma shpchp ipmi_si ipmi_devintf ipmi_msghandler wmi acpi_power_meter acpi_pad dm_multipath hangcheck_timer ip_tables ext4 mbcache jbd2 mlx4_en sd_mod crc_t10dif crct10dif_generic mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm mlx4_core crct10dif_pclmul crct10dif_common hfi1(OE) igb crc32c_intel rdmavt(OE) ahci ib_core libahci libata ptp megaraid_sas pps_core dca i2c_algo_bit i2c_core devlink dm_mirror dm_region_hash dm_log dm_mod CPU: 23 PID: 0 Comm: swapper/23 Tainted: P OE ------------ 3.10.0-693.el7.x86_64 #1 Hardware name: Intel Corporation S2600CWR/S2600CWR, BIOS SE5C610.86B.01.01.0028.121720182203 12/17/2018 task: ffff8808f4ec4f10 ti: ffff8808f4ed8000 task.ti: ffff8808f4ed8000 RIP: 0010:[ffffffff810a65f2] [ffffffff810a65f2] __queue_work+0x32/0x3c0 RSP: 0018:ffff88105df43d48 EFLAGS: 00010046 RAX: 0000000000000086 RBX: 0000000000000086 RCX: 0000000000000000 RDX: ffff880f74e758b0 RSI: 0000000000000000 RDI: 000000000000001f RBP: ffff88105df43d80 R08: ffff8808f3c583c8 R09: ffff8808f3c58000 R10: 0000000000000002 R11: ffff88105df43da8 R12: ffff880f74e758b0 R13: 000000000000001f R14: 0000000000000000 R15: ffff88105a300000 FS: 0000000000000000(0000) GS:ffff88105df40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000102 CR3: 00000000019f2000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff88105b6dd708 0000001f00000286 0000000000000086 ffff88105a300000 ffff880f74e75800 0000000000000000 ffff88105a300000 ffff88105df43d98 ffffffff810a6b85 ffff88105a301e80 ffff88105df43dc8 ffffffffc0224cde Call Trace: IRQ [ffffffff810a6b85] queue_work_on+0x45/0x50 [ffffffffc0224cde] _hfi1_schedule_send+0x6e/0xc0 [hfi1] [ffffffffc0170570] ? get_map_page+0x60/0x60 [rdmavt] [ffffffffc0224d62] hfi1_schedule_send+0x32/0x70 [hfi1] [ffffffffc0170644] rvt_rc_timeout+0xd4/0x120 [rdmavt] [ffffffffc0170570] ? get_map_page+0x60/0x60 [rdmavt] [ffffffff81097316] call_timer_fn+0x36/0x110 [ffffffffc0170570] ? get_map_page+0x60/0x60 [rdmavt] [ffffffff8109982d] run_timer_softirq+0x22d/0x310 [ffffffff81090b3f] __do_softirq+0xef/0x280 [ffffffff816b6a5c] call_softirq+0x1c/0x30 [ffffffff8102d3c5] do_softirq+0x65/0xa0 [ffffffff81090ec5] irq_exit+0x105/0x110 [ffffffff816b76c2] smp_apic_timer_interrupt+0x42/0x50 [ffffffff816b5c1d] apic_timer_interrupt+0x6d/0x80 EOI [ffffffff81527a02] ? cpuidle_enter_state+0x52/0xc0 [ffffffff81527b48] cpuidle_idle_call+0xd8/0x210 [ffffffff81034fee] arch_cpu_idle+0xe/0x30 [ffffffff810e7bca] cpu_startup_entry+0x14a/0x1c0 [ffffffff81051af6] start_secondary+0x1b6/0x230 Code: 89 e5 41 57 41 56 49 89 f6 41 55 41 89 fd 41 54 49 89 d4 53 48 83 ec 10 89 7d d4 9c 58 0f 1f 44 00 00 f6 c4 02 0f 85 be 02 00 00 41 f6 86 02 01 00 00 01 0f 85 58 02 00 00 49 c7 c7 28 19 01 00 RIP [ffffffff810a65f2] __queue_work+0x32/0x3c0 RSP ffff88105df43d48 CR2: 0000000000000102 The solution is to reset the QPs before the device resources are freed. This reset will change the QP state to prevent post sends and delete timers to prevent callbacks. Fixes: 0acb0cc7ecc1 ("IB/rdmavt: Initialize and teardown of qpn table") Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mike Marciniszyn <[email protected]> Signed-off-by: Kaike Wan <[email protected]> Signed-off-by: Dennis Dalessandro <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-02-11IB/hfi1: Close window for pq and request colidingMike Marciniszyn4-29/+48
Cleaning up a pq can result in the following warning and panic: WARNING: CPU: 52 PID: 77418 at lib/list_debug.c:53 __list_del_entry+0x63/0xd0 list_del corruption, ffff88cb2c6ac068->next is LIST_POISON1 (dead000000000100) Modules linked in: mmfs26(OE) mmfslinux(OE) tracedev(OE) 8021q garp mrp ib_isert iscsi_target_mod target_core_mod crc_t10dif crct10dif_generic opa_vnic rpcrdma ib_iser libiscsi scsi_transport_iscsi ib_ipoib(OE) bridge stp llc iTCO_wdt iTCO_vendor_support intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crct10dif_pclmul crct10dif_common crc32_pclmul ghash_clmulni_intel ast aesni_intel ttm lrw gf128mul glue_helper ablk_helper drm_kms_helper cryptd syscopyarea sysfillrect sysimgblt fb_sys_fops drm pcspkr joydev lpc_ich mei_me drm_panel_orientation_quirks i2c_i801 mei wmi ipmi_si ipmi_devintf ipmi_msghandler nfit libnvdimm acpi_power_meter acpi_pad hfi1(OE) rdmavt(OE) rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ib_core binfmt_misc numatools(OE) xpmem(OE) ip_tables nfsv3 nfs_acl nfs lockd grace sunrpc fscache igb ahci i2c_algo_bit libahci dca ptp libata pps_core crc32c_intel [last unloaded: i2c_algo_bit] CPU: 52 PID: 77418 Comm: pvbatch Kdump: loaded Tainted: G OE ------------ 3.10.0-957.38.3.el7.x86_64 #1 Hardware name: HPE.COM HPE SGI 8600-XA730i Gen10/X11DPT-SB-SG007, BIOS SBED1229 01/22/2019 Call Trace: [<ffffffff90365ac0>] dump_stack+0x19/0x1b [<ffffffff8fc98b78>] __warn+0xd8/0x100 [<ffffffff8fc98bff>] warn_slowpath_fmt+0x5f/0x80 [<ffffffff8ff970c3>] __list_del_entry+0x63/0xd0 [<ffffffff8ff9713d>] list_del+0xd/0x30 [<ffffffff8fddda70>] kmem_cache_destroy+0x50/0x110 [<ffffffffc0328130>] hfi1_user_sdma_free_queues+0xf0/0x200 [hfi1] [<ffffffffc02e2350>] hfi1_file_close+0x70/0x1e0 [hfi1] [<ffffffff8fe4519c>] __fput+0xec/0x260 [<ffffffff8fe453fe>] ____fput+0xe/0x10 [<ffffffff8fcbfd1b>] task_work_run+0xbb/0xe0 [<ffffffff8fc2bc65>] do_notify_resume+0xa5/0xc0 [<ffffffff90379134>] int_signal+0x12/0x17 BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: [<ffffffff8fe1f93e>] kmem_cache_close+0x7e/0x300 PGD 2cdab19067 PUD 2f7bfdb067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: mmfs26(OE) mmfslinux(OE) tracedev(OE) 8021q garp mrp ib_isert iscsi_target_mod target_core_mod crc_t10dif crct10dif_generic opa_vnic rpcrdma ib_iser libiscsi scsi_transport_iscsi ib_ipoib(OE) bridge stp llc iTCO_wdt iTCO_vendor_support intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crct10dif_pclmul crct10dif_common crc32_pclmul ghash_clmulni_intel ast aesni_intel ttm lrw gf128mul glue_helper ablk_helper drm_kms_helper cryptd syscopyarea sysfillrect sysimgblt fb_sys_fops drm pcspkr joydev lpc_ich mei_me drm_panel_orientation_quirks i2c_i801 mei wmi ipmi_si ipmi_devintf ipmi_msghandler nfit libnvdimm acpi_power_meter acpi_pad hfi1(OE) rdmavt(OE) rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ib_core binfmt_misc numatools(OE) xpmem(OE) ip_tables nfsv3 nfs_acl nfs lockd grace sunrpc fscache igb ahci i2c_algo_bit libahci dca ptp libata pps_core crc32c_intel [last unloaded: i2c_algo_bit] CPU: 52 PID: 77418 Comm: pvbatch Kdump: loaded Tainted: G W OE ------------ 3.10.0-957.38.3.el7.x86_64 #1 Hardware name: HPE.COM HPE SGI 8600-XA730i Gen10/X11DPT-SB-SG007, BIOS SBED1229 01/22/2019 task: ffff88cc26db9040 ti: ffff88b5393a8000 task.ti: ffff88b5393a8000 RIP: 0010:[<ffffffff8fe1f93e>] [<ffffffff8fe1f93e>] kmem_cache_close+0x7e/0x300 RSP: 0018:ffff88b5393abd60 EFLAGS: 00010287 RAX: 0000000000000000 RBX: ffff88cb2c6ac000 RCX: 0000000000000003 RDX: 0000000000000400 RSI: 0000000000000400 RDI: ffffffff9095b800 RBP: ffff88b5393abdb0 R08: ffffffff9095b808 R09: ffffffff8ff77c19 R10: ffff88b73ce1f160 R11: ffffddecddde9800 R12: ffff88cb2c6ac000 R13: 000000000000000c R14: ffff88cf3fdca780 R15: 0000000000000000 FS: 00002aaaaab52500(0000) GS:ffff88b73ce00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 0000002d27664000 CR4: 00000000007607e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: [<ffffffff8fe20d44>] __kmem_cache_shutdown+0x14/0x80 [<ffffffff8fddda78>] kmem_cache_destroy+0x58/0x110 [<ffffffffc0328130>] hfi1_user_sdma_free_queues+0xf0/0x200 [hfi1] [<ffffffffc02e2350>] hfi1_file_close+0x70/0x1e0 [hfi1] [<ffffffff8fe4519c>] __fput+0xec/0x260 [<ffffffff8fe453fe>] ____fput+0xe/0x10 [<ffffffff8fcbfd1b>] task_work_run+0xbb/0xe0 [<ffffffff8fc2bc65>] do_notify_resume+0xa5/0xc0 [<ffffffff90379134>] int_signal+0x12/0x17 Code: 00 00 ba 00 04 00 00 0f 4f c2 3d 00 04 00 00 89 45 bc 0f 84 e7 01 00 00 48 63 45 bc 49 8d 04 c4 48 89 45 b0 48 8b 80 c8 00 00 00 <48> 8b 78 10 48 89 45 c0 48 83 c0 10 48 89 45 d0 48 8b 17 48 39 RIP [<ffffffff8fe1f93e>] kmem_cache_close+0x7e/0x300 RSP <ffff88b5393abd60> CR2: 0000000000000010 The panic is the result of slab entries being freed during the destruction of the pq slab. The code attempts to quiesce the pq, but looking for n_req == 0 doesn't account for new requests. Fix the issue by using SRCU to get a pq pointer and adjust the pq free logic to NULL the fd pq pointer prior to the quiesce. Fixes: e87473bc1b6c ("IB/hfi1: Only set fd pointer when base context is completely initialized") Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Kaike Wan <[email protected]> Signed-off-by: Mike Marciniszyn <[email protected]> Signed-off-by: Dennis Dalessandro <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-02-11IB/hfi1: Acquire lock to release TID entries when user file is closedKaike Wan1-0/+2
Each user context is allocated a certain number of RcvArray (TID) entries and these entries are managed through TID groups. These groups are put into one of three lists in each user context: tid_group_list, tid_used_list, and tid_full_list, depending on the number of used TID entries within each group. When TID packets are expected, one or more TID groups will be allocated. After the packets are received, the TID groups will be freed. Since multiple user threads may access the TID groups simultaneously, a mutex exp_mutex is used to synchronize the access. However, when the user file is closed, it tries to release all TID groups without acquiring the mutex first, which risks a race condition with another thread that may be releasing its TID groups, leading to data corruption. This patch addresses the issue by acquiring the mutex first before releasing the TID groups when the file is closed. Fixes: 3abb33ac6521 ("staging/hfi1: Add TID cache receive init and free funcs") Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mike Marciniszyn <[email protected]> Signed-off-by: Kaike Wan <[email protected]> Signed-off-by: Dennis Dalessandro <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-02-11RDMA/hfi1: Fix memory leak in _dev_comp_vect_mappings_createKamal Heib1-0/+2
Make sure to free the allocated cpumask_var_t's to avoid the following reported memory leak by kmemleak: $ cat /sys/kernel/debug/kmemleak unreferenced object 0xffff8897f812d6a8 (size 8): comm "kworker/1:1", pid 347, jiffies 4294751400 (age 101.703s) hex dump (first 8 bytes): 00 00 00 00 00 00 00 00 ........ backtrace: [<00000000bff49664>] alloc_cpumask_var_node+0x4c/0xb0 [<0000000075d3ca81>] hfi1_comp_vectors_set_up+0x20f/0x800 [hfi1] [<0000000098d420df>] hfi1_init_dd+0x3311/0x4960 [hfi1] [<0000000071be7e52>] init_one+0x25e/0xf10 [hfi1] [<000000005483d4c2>] local_pci_probe+0xd4/0x180 [<000000007c3cbc6e>] work_for_cpu_fn+0x51/0xa0 [<000000001d626905>] process_one_work+0x8f0/0x17b0 [<000000007e569e7e>] worker_thread+0x536/0xb50 [<00000000fd39a4a5>] kthread+0x30c/0x3d0 [<0000000056f2edb3>] ret_from_fork+0x3a/0x50 Fixes: 5d18ee67d4c1 ("IB/{hfi1, rdmavt, qib}: Implement CQ completion vector support") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Kamal Heib <[email protected]> Reviewed-by: Dennis Dalessandro <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-02-11perf/x86/intel: Fix inaccurate period in context switch for auto-reloadKan Liang1-0/+2
Perf doesn't take the left period into account when auto-reload is enabled with fixed period sampling mode in context switch. Here is the MSR trace of the perf command as below. (The MSR trace is simplified from a ftrace log.) #perf record -e cycles:p -c 2000000 -- ./triad_loop //The MSR trace of task schedule out //perf disable all counters, disable PEBS, disable GP counter 0, //read GP counter 0, and re-enable all counters. //The counter 0 stops at 0xfffffff82840 write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0 write_msr: MSR_IA32_PEBS_ENABLE(3f1), value 0 write_msr: MSR_P6_EVNTSEL0(186), value 40003003c rdpmc: 0, value fffffff82840 write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value f000000ff //The MSR trace of the same task schedule in again //perf disable all counters, enable and set GP counter 0, //enable PEBS, and re-enable all counters. //0xffffffe17b80 (-2000000) is written to GP counter 0. write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0 write_msr: MSR_IA32_PMC0(4c1), value ffffffe17b80 write_msr: MSR_P6_EVNTSEL0(186), value 40043003c write_msr: MSR_IA32_PEBS_ENABLE(3f1), value 1 write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value f000000ff When the same task schedule in again, the counter should starts from previous left. However, it starts from the fixed period -2000000 again. A special variant of intel_pmu_save_and_restart() is used for auto-reload, which doesn't update the hwc->period_left. When the monitored task schedules in again, perf doesn't know the left period. The fixed period is used, which is inaccurate. With auto-reload, the counter always has a negative counter value. So the left period is -value. Update the period_left in intel_pmu_save_and_restart_reload(). With the patch: //The MSR trace of task schedule out write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0 write_msr: MSR_IA32_PEBS_ENABLE(3f1), value 0 write_msr: MSR_P6_EVNTSEL0(186), value 40003003c rdpmc: 0, value ffffffe25cbc write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value f000000ff //The MSR trace of the same task schedule in again write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0 write_msr: MSR_IA32_PMC0(4c1), value ffffffe25cbc write_msr: MSR_P6_EVNTSEL0(186), value 40043003c write_msr: MSR_IA32_PEBS_ENABLE(3f1), value 1 write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value f000000ff Fixes: d31fc13fdcb2 ("perf/x86/intel: Fix event update for auto-reload") Signed-off-by: Kan Liang <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-02-11perf/x86/amd: Add missing L2 misses event spec to AMD Family 17h's event mapKim Phillips1-0/+1
Commit 3fe3331bb285 ("perf/x86/amd: Add event map for AMD Family 17h"), claimed L2 misses were unsupported, due to them not being found in its referenced documentation, whose link has now moved [1]. That old documentation listed PMCx064 unit mask bit 3 as: "LsRdBlkC: LS Read Block C S L X Change to X Miss." and bit 0 as: "IcFillMiss: IC Fill Miss" We now have new public documentation [2] with improved descriptions, that clearly indicate what events those unit mask bits represent: Bit 3 now clearly states: "LsRdBlkC: Data Cache Req Miss in L2 (all types)" and bit 0 is: "IcFillMiss: Instruction Cache Req Miss in L2." So we can now add support for L2 misses in perf's genericised events as PMCx064 with both the above unit masks. [1] The commit's original documentation reference, "Processor Programming Reference (PPR) for AMD Family 17h Model 01h, Revision B1 Processors", originally available here: https://www.amd.com/system/files/TechDocs/54945_PPR_Family_17h_Models_00h-0Fh.pdf is now available here: https://developer.amd.com/wordpress/media/2017/11/54945_PPR_Family_17h_Models_00h-0Fh.pdf [2] "Processor Programming Reference (PPR) for Family 17h Model 31h, Revision B0 Processors", available here: https://developer.amd.com/wp-content/resources/55803_0.54-PUB.pdf Fixes: 3fe3331bb285 ("perf/x86/amd: Add event map for AMD Family 17h") Reported-by: Babu Moger <[email protected]> Signed-off-by: Kim Phillips <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Tested-by: Babu Moger <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2020-02-11perf/x86/msr: Add Tremont supportKan Liang1-1/+2
Tremont is Intel's successor to Goldmont Plus. SMI_COUNT MSR is also supported. Signed-off-by: Kan Liang <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Reviewed-by: Andi Kleen <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-02-11perf/x86/cstate: Add Tremont supportKan Liang1-9/+13
Tremont is Intel's successor to Goldmont Plus. From the perspective of Intel cstate residency counters, there is nothing changed compared with Goldmont Plus and Goldmont. Share glm_cstates with Goldmont Plus and Goldmont. Update the comments for Tremont. Signed-off-by: Kan Liang <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Reviewed-by: Andi Kleen <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-02-11perf/x86/intel: Add Elkhart Lake supportKan Liang1-0/+1
Elkhart Lake also uses Tremont CPU. From the perspective of Intel PMU, there is nothing changed compared with Jacobsville. Share the perf code with Jacobsville. Signed-off-by: Kan Liang <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Reviewed-by: Andi Kleen <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-02-11sched/fair: Fix kernel-doc warning in attach_entity_load_avg()Randy Dunlap1-1/+0
Fix kernel-doc warning in kernel/sched/fair.c, caused by a recent function parameter removal: ../kernel/sched/fair.c:3526: warning: Excess function parameter 'flags' description in 'attach_entity_load_avg' Fixes: a4f9a0e51bbf ("sched/fair: Remove redundant call to cpufreq_update_util()") Signed-off-by: Randy Dunlap <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Reviewed-by: Vincent Guittot <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-02-11sched/core: Annotate curr pointer in rq with __rcuMadhuparna Bhowmik1-1/+1
This patch fixes the following sparse warnings in sched/core.c and sched/membarrier.c: kernel/sched/core.c:2372:27: error: incompatible types in comparison expression kernel/sched/core.c:4061:17: error: incompatible types in comparison expression kernel/sched/core.c:6067:9: error: incompatible types in comparison expression kernel/sched/membarrier.c:108:21: error: incompatible types in comparison expression kernel/sched/membarrier.c:177:21: error: incompatible types in comparison expression kernel/sched/membarrier.c:243:21: error: incompatible types in comparison expression Signed-off-by: Madhuparna Bhowmik <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-02-11sched/psi: Fix OOB write when writing 0 bytes to PSI filesSuren Baghdasaryan1-0/+3
Issuing write() with count parameter set to 0 on any file under /proc/pressure/ will cause an OOB write because of the access to buf[buf_size-1] when NUL-termination is performed. Fix this by checking for buf_size to be non-zero. Signed-off-by: Suren Baghdasaryan <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Acked-by: Johannes Weiner <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-02-11arm/patch: Fix !MMU compilePeter Zijlstra1-10/+9
Now that patch.o is unconditionally selected for ftrace, it can also get compiled for !MMU kernels. These (obviously) lack {set,clear}_fixmap() support. Also remove the superfluous __acquire/__release nonsense. Fixes: 42e51f187f86 ("arm/ftrace: Use __patch_text()") Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2020-02-11arm/ftrace: Fix BE text pokingPeter Zijlstra1-5/+2
The __patch_text() function already applies __opcode_to_mem_*(), so when __opcode_to_mem_*() is not the identity (BE*), it is applied twice, wrecking the instruction. Fixes: 42e51f187f86 ("arm/ftrace: Use __patch_text()") Reported-by: Dmitry Osipenko <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Tested-by: Dmitry Osipenko <[email protected]>
2020-02-11ALSA: usb-audio: Apply 48kHz fixed rate playback for Jabra Evolve 65 headsetTakashi Iwai1-11/+22
Jabra Evolve 65 headset appears as if supporting lower rates than 48kHz, but it actually doesn't work but with 48kHz for playback. This patch applies a workaround to enforce the 48kHz like LINE6 devices already did. The workaround is put in a unified helper function, set_fixed_rate(), to be called from both places now. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206149 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-02-11drm/i915: Check activity on i915_vma after confirming pin_count==0Chris Wilson1-2/+12
Only assert that the i915_vma is now idle if and only if no other pins are present. If another user has the i915_vma pinned, they may submit more work to the i915_vma skipping the vm->mutex used to serialise the unbind. We need to wait again, if we want to continue and unbind this vma. However, if we own the i915_vma (we hold the vm->mutex for the unbind and the pin_count is 0), we can assert that the vma remains idle as we unbind. Fixes: 2850748ef876 ("drm/i915: Pull i915_vma_pin under the vm->mutex") Closes: https://gitlab.freedesktop.org/drm/intel/issues/530 Signed-off-by: Chris Wilson <[email protected]> Cc: Tvrtko Ursulin <[email protected]> Reviewed-by: Tvrtko Ursulin <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 60e94557fff1f5514c7fc4da7ddc2c7a13ffff26) Signed-off-by: Jani Nikula <[email protected]>
2020-02-11drm/i915/gem: Detect overflow in calculating dumb buffer sizeChris Wilson1-1/+4
To multiply 2 u32 numbers to generate a u64 in C requires a bit of forewarning for the compiler. Signed-off-by: Chris Wilson <[email protected]> Cc: Ramalingam C <[email protected]> Cc: Joonas Lahtinen <[email protected]> Cc: [email protected] Reviewed-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 0f8f8a64300092852b9361cd835395ee71e6a7d6) Signed-off-by: Jani Nikula <[email protected]>
2020-02-11drm/i915: Don't show the blank process name for internal/simulated errorsChris Wilson1-1/+1
For a simulated preemption reset, we don't populate the request and so do not fill in the guilty context name. [ 79.991294] i915 0000:00:02.0: GPU HANG: ecode 9:1:e757fefe, in [0] Just don't mention the empty string in the logs! Fixes: 742379c0c400 ("drm/i915: Start chopping up the GPU error capture") Signed-off-by: Chris Wilson <[email protected]> Cc: Mika Kuoppala <[email protected]> Reviewed-by: Mika Kuoppala <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 29baf3ae8daa4c673de58106ff41c7236dff57f4) Signed-off-by: Jani Nikula <[email protected]>
2020-02-11drm/i915/gem: Store mmap_offsets in an rbtree rather than a plain listChris Wilson3-29/+85
Currently we create a new mmap_offset for every call to mmap_offset_ioctl. This exposes ourselves to an abusive client that may simply create new mmap_offsets ad infinitum, which will exhaust physical memory and the virtual address space. In addition to the exhaustion, a very long linear list of mmap_offsets causes other clients using the object to incur long list walks -- these long lists can also be generated by simply having many clients generate their own mmap_offset. However, we can simply use the drm_vma_node itself to manage the file association (allow/revoke) dropping our need to keep an mmo per-file. Then if we keep a small rbtree of per-type mmap_offsets, we can lookup duplicate requests quickly. Fixes: cc662126b413 ("drm/i915: Introduce DRM_I915_GEM_MMAP_OFFSET") Signed-off-by: Chris Wilson <[email protected]> Cc: Abdiel Janulgue <[email protected]> Reviewed-by: Abdiel Janulgue <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 7865559872074a9ab169c87915504661d630addf) Signed-off-by: Jani Nikula <[email protected]>
2020-02-11drm/i915/execlists: Leave resetting ring to intel_ringChris Wilson1-1/+0
We need to allow concurrent intel_context_unpin, which means avoiding doing destructive operations like intel_ring_reset(). This was already fixed for intel_ring_unpin() in commit 0725d9a31869 ("drm/i915/gt: Make intel_ring_unpin() safe for concurrent pint"), but I overlooked that execlists_context_unpin() also made the same mistake. Reported-by: Matthew Brost <[email protected]> Fixes: 841350223816 ("drm/i915/gt: Drop mutex serialisation between context pin/unpin") References: 0725d9a31869 ("drm/i915/gt: Make intel_ring_unpin() safe for concurrent pint") Signed-off-by: Chris Wilson <[email protected]> Cc: Matthew Brost <[email protected]> Cc: Matthew Auld <[email protected]> Cc: Tvrtko Ursulin <[email protected]> Reviewed-by: Mika Kuoppala <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit f3c0efc9fe7a4e61544034f525348a3aa86ac5aa) Signed-off-by: Jani Nikula <[email protected]>
2020-02-11arm64: Fix CONFIG_ARCH_RANDOM=n buildRobin Murphy1-0/+1
The entire asm/archrandom.h header is generically included via linux/archrandom.h only when CONFIG_ARCH_RANDOM is already set, so the stub definitions of __arm64_rndr() and __early_cpu_has_rndr() are only visible to KASLR if it explicitly includes the arch-internal header. Acked-by: Mark Brown <[email protected]> Signed-off-by: Robin Murphy <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2020-02-11ACPI: PM: s2idle: Avoid possible race related to the EC GPERafael J. Wysocki3-18/+37
It is theoretically possible for the ACPI EC GPE to be set after the s2idle_ops->wake() called from s2idle_loop() has returned and before the subsequent pm_wakeup_pending() check is carried out. If that happens, the resulting wakeup event will cause the system to resume even though it may be a spurious one. To avoid that race, first make the ->wake() callback in struct platform_s2idle_ops return a bool value indicating whether or not to let the system resume and rearrange s2idle_loop() to use that value instad of the direct pm_wakeup_pending() call if ->wake() is present. Next, rework acpi_s2idle_wake() to process EC events and check pm_wakeup_pending() before re-arming the SCI for system wakeup to prevent it from triggering prematurely and add comments to that function to explain the rationale for the new code flow. Fixes: 56b991849009 ("PM: sleep: Simplify suspend-to-idle control flow") Cc: 5.4+ <[email protected]> # 5.4+ Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-02-11ACPI: EC: Fix flushing of pending workRafael J. Wysocki1-18/+26
Commit 016b87ca5c8c ("ACPI: EC: Rework flushing of pending work") introduced a subtle bug into the flushing of pending EC work while suspended to idle, which may cause the EC driver to fail to re-enable the EC GPE after handling a non-wakeup event (like a battery status change event, for example). The problem is that the work item flushed by flush_scheduled_work() in __acpi_ec_flush_work() may disable the EC GPE and schedule another work item expected to re-enable it, but that new work item is not flushed, so __acpi_ec_flush_work() returns with the EC GPE disabled and the CPU running it goes into an idle state subsequently. If all of the other CPUs are in idle states at that point, the EC GPE won't be re-enabled until at least one CPU is woken up by another interrupt source, so system wakeup events that would normally come from the EC then don't work. This is reproducible on a Dell XPS13 9360 in my office which sometimes stops reacting to power button and lid events (triggered by the EC on that machine) after switching from AC power to battery power or vice versa while suspended to idle (each of those switches causes the EC GPE to trigger for several times in a row, but they are not system wakeup events). To avoid this problem, it is necessary to drain the workqueue entirely in __acpi_ec_flush_work(), but that cannot be done with respect to system_wq, because work items may be added to it from other places while __acpi_ec_flush_work() is running. For this reason, make the EC driver use a dedicated workqueue for EC events processing (let that workqueue be ordered so that EC events are processed sequentially) and use drain_workqueue() on it in __acpi_ec_flush_work(). Fixes: 016b87ca5c8c ("ACPI: EC: Rework flushing of pending work") Cc: 5.4+ <[email protected]> # 5.4+ Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-02-10tracing: Consolidate trace() functionsTom Zanussi2-135/+87
Move the checking, buffer reserve and buffer commit code in synth_event_trace_start/end() into inline functions __synth_event_trace_start/end() so they can also be used by synth_event_trace() and synth_event_trace_array(), and then have all those functions use them. Also, change synth_event_trace_state.enabled to disabled so it only needs to be set if the event is disabled, which is not normally the case. Link: http://lkml.kernel.org/r/b1f3108d0f450e58192955a300e31d0405ab4149.1581374549.git.zanussi@kernel.org Signed-off-by: Tom Zanussi <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-02-10tracing: Don't return -EINVAL when tracing soft disabled synth eventsTom Zanussi1-14/+6
There's no reason to return -EINVAL when tracing a synthetic event if it's soft disabled - treat it the same as if it were hard disabled and return normally. Have synth_event_trace() and synth_event_trace_array() just return normally, and have synth_event_trace_start set the trace state to disabled and return. Link: http://lkml.kernel.org/r/df5d02a1625aff97c9866506c5bada6a069982ba.1581374549.git.zanussi@kernel.org Fixes: 8dcc53ad956d2 ("tracing: Add synth_event_trace() and related functions") Signed-off-by: Tom Zanussi <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-02-10tracing: Add missing nest end to synth_event_trace_start() error caseTom Zanussi1-0/+1
If the ring_buffer reserve in synth_event_trace_start() fails, the matching ring_buffer_nest_end() should be called in the error code, since nothing else will ever call it in this case. Link: http://lkml.kernel.org/r/20abc444b3eeff76425f895815380abe7aa53ff8.1581374549.git.zanussi@kernel.org Fixes: 8dcc53ad956d2 ("tracing: Add synth_event_trace() and related functions") Signed-off-by: Tom Zanussi <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-02-10Merge branch 'for-5.6-fixes' of ↵Linus Torvalds1-5/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fix from Tejun Heo: "I made a mistake while removing cgroup task list lazy init optimization making the root cgroup.procs show entries for the init_tasks. The zero entries doesn't cause critical failures but does make systemd print out warning messages during boot. Fix it by omitting init_tasks as they should be" * 'for-5.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: init_tasks shouldn't be linked to the root cgroup
2020-02-10Merge tag 'selinux-pr-20200210' of ↵Linus Torvalds2-10/+4
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull SELinux fixes from Paul Moore: "Two small fixes: one fixes a locking problem in the recently merged label translation code, the other fixes an embarrassing 'binderfs' / 'binder' filesystem name check" * tag 'selinux-pr-20200210' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: fix sidtab string cache locking selinux: fix typo in filesystem name
2020-02-10tools/bootconfig: Suppress non-error messagesMasami Hiramatsu2-14/+23
Suppress non-error messages when applying new bootconfig to initrd image. To enable it, replace printf for error message with pr_err() macro. This also adds a testcase for this fix. Link: http://lkml.kernel.org/r/158125351377.16911.13283712972275131160.stgit@devnote2 Reported-by: Michael Ellerman <[email protected]> Tested-by: Michael Ellerman <[email protected]> Signed-off-by: Masami Hiramatsu <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-02-10bootconfig: Allocate xbc_nodes array dynamicallyMasami Hiramatsu2-3/+24
To reduce the large static array from kernel data, allocate xbc_nodes array dynamically only if the kernel loads a bootconfig. Note that this also add dummy memblock.h for user-spacae bootconfig tool. Link: http://lkml.kernel.org/r/158108569699.3187.6512834527603883707.stgit@devnote2 Signed-off-by: Masami Hiramatsu <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-02-11kbuild: fix mismatch between .version and include/generated/compile.hMasahiro Yamada1-1/+1
Since commit 56d589361572 ("kbuild: do not create orphan built-in.a or obj-y objects"), scripts/link-vmlinux.sh does nothing when descending into init/. Once the version number becomes out of sync between .version and include/generated/compile.h, it is not self-healing. [How to reproduce] $ echo 100 > .version $ make You will see the number in the .version is always bigger than that in compile.h by one. After this, every time you run 'make', the vmlinux is re-linked even when none of source files is updated. Fixes: 56d589361572 ("kbuild: do not create orphan built-in.a or obj-y objects") Signed-off-by: Masahiro Yamada <[email protected]>
2020-02-11scripts/kallsyms: fix memory corruption caused by write over-runMasahiro Yamada1-2/+2
memcpy() writes one more byte than allocated. Fixes: 8d60526999aa ("scripts/kallsyms: change table to store (strcut sym_entry *)") Reported-by: youling257 <[email protected]> Reported-by: Pavel Machek <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]> Tested-by: Pavel Machek <[email protected]>
2020-02-10perf symbols: Convert symbol__is_idle() to use strlistKim Phillips1-5/+9
Use the more optimized strlist implementation to do the idle function lookup. Signed-off-by: Kim Phillips <[email protected]> Acked-by: Song Liu <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Cong Wang <[email protected]> Cc: Davidlohr Bueso <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-02-10perf symbols: Update the list of kernel idle symbolsKim Phillips1-0/+3
The "acpi_idle_do_entry", "acpi_processor_ffh_cstate_enter", and "idle_cpu" symbols appear in 'perf top' output, at least on AMD systems. Add them to perf's idle_symbols list, so they don't dominate 'perf top' output. Signed-off-by: Kim Phillips <[email protected]> Acked-by: Jiri Olsa <[email protected]> Acked-by: Song Liu <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Cong Wang <[email protected]> Cc: Davidlohr Bueso <[email protected]> Cc: Jin Yao <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-02-10perf stat: Don't report a null stalled cycles per insn metricKim Phillips1-6/+0
For data collected on machines with front end stalled cycles supported, such as found on modern AMD CPU families, commit 146540fb545b ("perf stat: Always separate stalled cycles per insn") introduces a new line in CSV output with a leading comma that upsets some automated scripts. Scripts have to use "-e ex_ret_instr" to work around this issue, after upgrading to a version of perf with that commit. We could add "if (have_frontend_stalled && !config->csv_sep)" to the not (total && avg) else clause, to emphasize that CSV users are usually scripts, and are written to do only what is needed, i.e., they wouldn't typically invoke "perf stat" without specifying an explicit event list. But - let alone CSV output - why should users now tolerate a constant 0-reporting extra line in regular terminal output?: BEFORE: $ sudo perf stat --all-cpus -einstructions,cycles -- sleep 1 Performance counter stats for 'system wide': 181,110,981 instructions # 0.58 insn per cycle # 0.00 stalled cycles per insn 309,876,469 cycles 1.002202582 seconds time elapsed The user would not like to see the now permanent: "0.00 stalled cycles per insn" line fixture, as it gives no useful information. So this patch removes the printing of the zeroed stalled cycles line altogether, almost reverting the very original commit fb4605ba47e7 ("perf stat: Check for frontend stalled for metrics"), which seems like it was written to normalize --metric-only column output of common Intel machines at the time: modern Intel machines have ceased to support the genericised frontend stalled metrics AFAICT. AFTER: $ sudo perf stat --all-cpus -einstructions,cycles -- sleep 1 Performance counter stats for 'system wide': 244,071,432 instructions # 0.69 insn per cycle 355,353,490 cycles 1.001862516 seconds time elapsed Output behaviour when stalled cycles is indeed measured is not affected (BEFORE == AFTER): $ sudo perf stat --all-cpus -einstructions,cycles,stalled-cycles-frontend -- sleep 1 Performance counter stats for 'system wide': 247,227,799 instructions # 0.63 insn per cycle # 0.26 stalled cycles per insn 394,745,636 cycles 63,194,485 stalled-cycles-frontend # 16.01% frontend cycles idle 1.002079770 seconds time elapsed Fixes: 146540fb545b ("perf stat: Always separate stalled cycles per insn") Signed-off-by: Kim Phillips <[email protected]> Acked-by: Andi Kleen <[email protected]> Acked-by: Jiri Olsa <[email protected]> Acked-by: Song Liu <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Cong Wang <[email protected]> Cc: Davidlohr Bueso <[email protected]> Cc: Jin Yao <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-02-10perf/smmuv3: Use platform_get_irq_optional() for wired interruptJohn Garry1-1/+1
Even though a SMMUv3 PMCG implementation may use an MSI as the form of interrupt source, the kernel would still complain that it does not find the wired (GSIV) interrupt in this case: root@(none)$ dmesg | grep arm-smmu-v3-pmcg | grep "not found" [ 59.237219] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.8.auto: IRQ index 0 not found [ 59.322841] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.9.auto: IRQ index 0 not found [ 59.422155] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.10.auto: IRQ index 0 not found [ 59.539014] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.11.auto: IRQ index 0 not found [ 59.640329] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.12.auto: IRQ index 0 not found [ 59.743112] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.13.auto: IRQ index 0 not found [ 59.880577] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.14.auto: IRQ index 0 not found [ 60.017528] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.15.auto: IRQ index 0 not found Use platform_get_irq_optional() to silence the warning. If neither interrupt source is found, then the driver will still warn that IRQ setup errored and the probe will fail. Reviewed-by: Robin Murphy <[email protected]> Signed-off-by: John Garry <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2020-02-10Input: psmouse - switch to using i2c_new_scanned_device()Wolfram Sang1-3/+5
Move from the deprecated i2c_new_probed_device() to the new i2c_new_scanned_device(). Make use of the new ERRPTR if suitable. Signed-off-by: Wolfram Sang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2020-02-10Input: ili210x - add ili2120 supportLuca Weiss2-1/+34
This adds support for the Ilitek ili2120 touchscreen found in the Fairphone 2 smartphone. Signed-off-by: Luca Weiss <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2020-02-10Input: ili210x - fix return value of is_visible functionLuca Weiss1-1/+1
The is_visible function expects the permissions associated with an attribute of the sysfs group or 0 if an attribute is not visible. Change the code to return the attribute permissions when the attribute should be visible which resolves the warning: Attribute calibrate: Invalid permissions 01 Fixes: cc12ba1872c6 ("Input: ili210x - optionally show calibrate sysfs attribute") Signed-off-by: Luca Weiss <[email protected]> Reviewed-by: Sven Van Asbroeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2020-02-10bootconfig: Use parse_args() to find bootconfig and '--'Steven Rostedt (VMware)1-7/+30
The current implementation does a naive search of "bootconfig" on the kernel command line. But this could find "bootconfig" that is part of another option in quotes (although highly unlikely). But it also needs to find '--' on the kernel command line to know if it should append a '--' or not when a bootconfig in the initrd file has an "init" section. The check uses the naive strstr() to find to see if it exists. But this can return a false positive if it exists in an option and then the "init" section in the initrd will not be appended properly. Using parse_args() to find both of these will solve both of these problems. Link: https://lore.kernel.org/r/202002070954.C18E7F58B@keescook Fixes: 7495e0926fdf3 ("bootconfig: Only load bootconfig if "bootconfig" is on the kernel cmdline") Fixes: 1319916209ce8 ("bootconfig: init: Allow admin to use bootconfig for init command line") Reported-by: Kees Cook <[email protected]> Reviewed-by: Kees Cook <[email protected]> Acked-by: Masami Hiramatsu <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-02-10tracing/kprobe: Fix uninitialized variable bugGustavo A. R. Silva1-1/+1
There is a potential execution path in which variable *ret* is returned without being properly initialized, previously. Fix this by initializing variable *ret* to 0. Link: http://lkml.kernel.org/r/20200205223404.GA3379@embeddedor Addresses-Coverity-ID: 1491142 ("Uninitialized scalar variable") Fixes: 2a588dd1d5d6 ("tracing: Add kprobe event command generation functions") Reviewed-by: Tom Zanussi <[email protected]> Acked-by: Masami Hiramatsu <[email protected]> Signed-off-by: Gustavo A. R. Silva <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-02-10bootconfig: Remove unneeded CONFIG_LIBXBCMasami Hiramatsu3-5/+1
Since there is no user except CONFIG_BOOT_CONFIG and no plan to use it from other functions, CONFIG_LIBXBC can be removed and we can use CONFIG_BOOT_CONFIG directly. Link: http://lkml.kernel.org/r/158098769281.939.16293492056419481105.stgit@devnote2 Suggested-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Masami Hiramatsu <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-02-10tools/bootconfig: Fix wrong __VA_ARGS__ usageMasami Hiramatsu1-1/+1
Since printk() wrapper macro uses __VA_ARGS__ without "##" prefix, it causes a build error if there is no variable arguments (e.g. only fmt is specified.) To fix this error, use ##__VA_ARGS__ instead of __VAR_ARGS__. Link: http://lkml.kernel.org/r/158108370130.2758.10893830923800978011.stgit@devnote2 Fixes: 950313ebf79c ("tools: bootconfig: Add bootconfig command") Reported-by: Michael Ellerman <[email protected]> Tested-by: Michael Ellerman <[email protected]> Signed-off-by: Masami Hiramatsu <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-02-10NFSv4: Fix races between open and dentry revalidationTrond Myklebust2-3/+16
We want to make sure that we revalidate the dentry if and only if we've done an OPEN by filename. In order to avoid races with remote changes to the directory on the server, we want to save the verifier before calling OPEN. The exception is if the server returned a delegation with our OPEN, as we then know that the filename can't have changed on the server. Signed-off-by: Trond Myklebust <[email protected]> Reviewed-by: Benjamin Coddington <[email protected]> Tested-by: Benjamin Coddington <[email protected]> Signed-off-by: Anna Schumaker <[email protected]>
2020-02-10NFS: Fix up directory verifier racesTrond Myklebust1-7/+14
In order to avoid having our dentry revalidation race with an update of the directory on the server, we need to store the verifier before the RPC calls to LOOKUP and READDIR. Signed-off-by: Trond Myklebust <[email protected]> Reviewed-by: Benjamin Coddington <[email protected]> Tested-by: Benjamin Coddington <[email protected]> Signed-off-by: Anna Schumaker <[email protected]>
2020-02-10cifs: fix mount option display for sec=krb5iPetr Pavlu1-1/+5
Fix display for sec=krb5i which was wrongly interleaved by cruid, resulting in string "sec=krb5,cruid=<...>i" instead of "sec=krb5i,cruid=<...>". Fixes: 96281b9e46eb ("smb3: for kerberos mounts display the credential uid used") Signed-off-by: Petr Pavlu <[email protected]> Signed-off-by: Steve French <[email protected]>
2020-02-10qmi_wwan: unconditionally reject 2 ep interfacesBjørn Mork1-27/+15
We have been using the fact that the QMI and DIAG functions usually are the only ones with class/subclass/protocol being ff/ff/ff on Quectel modems. This has allowed us to match the QMI function without knowing the exact interface number, which can vary depending on firmware configuration. The ability to silently reject the DIAG function, which is usually handled by the option driver, is important for this method to work. This is done based on the knowledge that it has exactly 2 bulk endpoints. QMI function control interfaces will have either 3 or 1 endpoint. This rule is universal so the quirk condition can be removed. The fixed layouts known from the Gobi1k and Gobi2k modems have been gradually replaced by more dynamic layouts, and many vendors now use configurable layouts without changing device IDs. Renaming the class/subclass/protocol matching macro makes it more obvious that this is now not Quectel specific anymore. Cc: Kristian Evensen <[email protected]> Cc: Aleksander Morgado <[email protected]> Signed-off-by: Bjørn Mork <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-10net: dsa: mv88e6xxx: Prevent truncation of longer interrupt namesAndrew Lunn1-6/+6
When adding support for unique interrupt names, after testing on a few devices, it was assumed 32 characters would be sufficient. This assumption turned out to be incorrect, ZII RDU2 for example uses a device base name of mv88e6xxx-30be0000.ethernet-1:0, leaving no space for post fixes such as -g1-atu-prob and -watchdog. The names then become identical, defeating the point of the patch. Increase the length of the string to 64 charactoes. Reported-by: Chris Healy <[email protected]> Fixes: 3095383a8ab4 ("net: dsa: mv88e6xxx: Unique IRQ name") Signed-off-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-10qmi_wwan: re-add DW5821e pre-production variantBjørn Mork1-0/+1
Commit f25e1392fdb5 removed the support for the pre-production variant of the Dell DW5821e to avoid probing another USB interface unnecessarily. However, the pre-production samples are found in the wild, and this lack of support is causing problems for users of such samples. It is therefore necessary to support both variants. Matching on both interfaces 0 and 1 is not expected to cause any problem with either variant, as only the QMI function will be probed successfully on either. Interface 1 will be rejected based on the HID class for the production variant: T: Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 2 P: Vendor=413c ProdID=81d7 Rev=03.18 S: Manufacturer=DELL S: Product=DW5821e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option And interface 0 will be rejected based on too few endpoints for the pre-production variant: T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 2 P: Vendor=413c ProdID=81d7 Rev= 3.18 S: Manufacturer=DELL S: Product=DW5821e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver= I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option Fixes: f25e1392fdb5 ("qmi_wwan: fix interface number for DW5821e production firmware") Link: https://whrl.pl/Rf0vNk Reported-by: Lars Melin <[email protected]> Cc: Aleksander Morgado <[email protected]> Signed-off-by: Bjørn Mork <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-10gpio: sifive: fix static checker warningYash Shah1-3/+3
Typcasting "irq_state" leads to the below static checker warning: The fix is to declare "irq_state" as unsigned long instead of u32. drivers/gpio/gpio-sifive.c:97 sifive_gpio_irq_enable() warn: passing casted pointer '&chip->irq_state' to 'assign_bit()' 32 vs 64. Fixes: 96868dce644d ("gpio/sifive: Add GPIO driver for SiFive SoCs") Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Yash Shah <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Marc Zyngier <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.