aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-05-04secure_seq: use the 64 bits of the siphash for port offset calculationWilly Tarreau5-11/+13
SipHash replaced MD5 in secure_ipv{4,6}_port_ephemeral() via commit 7cd23e5300c1 ("secure_seq: use SipHash in place of MD5"), but the output remained truncated to 32-bit only. In order to exploit more bits from the hash, let's make the functions return the full 64-bit of siphash_3u32(). We also make sure the port offset calculation in __inet_hash_connect() remains done on 32-bit to avoid the need for div_u64_rem() and an extra cost on 32-bit systems. Cc: Jason A. Donenfeld <[email protected]> Cc: Moshe Kol <[email protected]> Cc: Yossi Gilad <[email protected]> Cc: Amit Klein <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Signed-off-by: Willy Tarreau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-04Merge branch 'wireguard-patches-for-5-18-rc6'Jakub Kicinski21-99/+228
Jason A. Donenfeld says: ==================== wireguard patches for 5.18-rc6 In working on some other problems, I wound up leaning on the WireGuard CI more than usual and uncovered a few small issues with reliability. These are fairly low key changes, since they don't impact kernel code itself. One change does stick out in particular, though, which is the "make routing loop test non-fatal" commit. I'm not thrilled about doing this, but currently [1] remains unsolved, and I'm still working on a real solution to that (hopefully for 5.19 or 5.20 if I can come up with a good idea...), so for now that test just prints a big red warning instead. [1] https://lore.kernel.org/netdev/[email protected]/ ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-04wireguard: selftests: set panic_on_warn=1 from cmdlineJason A. Donenfeld18-23/+17
Rather than setting this once init is running, set panic_on_warn from the kernel command line, so that it catches splats from WireGuard initialization code and the various crypto selftests. Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-04wireguard: selftests: bump package depsJason A. Donenfeld1-9/+9
Use newer, more reliable package dependencies. These should hopefully reduce flakes. However, we keep the old iputils package, as it accumulated bugs after resulting in flakes on slow machines. Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-04wireguard: selftests: restore support for ccacheJason A. Donenfeld2-1/+18
When moving to non-system toolchains, we inadvertantly killed the ability to use ccache. So instead, build ccache support into the test harness directly. Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-04wireguard: selftests: use newer toolchains to fill out architecturesJason A. Donenfeld9-63/+169
Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-04wireguard: selftests: limit parallelism to $(nproc) tests at onceJason A. Donenfeld1-10/+10
The parallel tests were added to catch queueing issues from multiple cores. But what happens in reality when testing tons of processes is that these separate threads wind up fighting with the scheduler, and we wind up with contention in places we don't care about that decrease the chances of hitting a bug. So just do a test with the number of CPU cores, rather than trying to scale up arbitrarily. Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-04wireguard: selftests: make routing loop test non-fatalJason A. Donenfeld1-1/+13
I hate to do this, but I still do not have a good solution to actually fix this bug across architectures. So just disable it for now, so that the CI can still deliver actionable results. This commit adds a large red warning, so that at least the failure isn't lost forever, and hopefully this can be revisited down the line. Link: https://lore.kernel.org/netdev/CAHmME9pv1x6C4TNdL6648HydD8r+txpV4hTUXOBVkrapBXH4QQ@mail.gmail.com/ Link: https://lore.kernel.org/netdev/[email protected]/ Link: https://lore.kernel.org/wireguard/CAHmME9rNnBiNvBstb7MPwK-7AmAN0sOfnhdR=eeLrowWcKxaaQ@mail.gmail.com/ Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-04Merge tag 'iomm-fixes-v5.18-rc5' of ↵Linus Torvalds6-10/+79
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: "IOMMU core: - Fix for a regression which could cause NULL-ptr dereferences Arm SMMU: - Fix off-by-one in SMMUv3 SVA TLB invalidation - Disable large mappings to workaround nvidia erratum Intel VT-d: - Handle PCI stop marker messages in IOMMU driver to meet the requirement of I/O page fault handling framework. - Calculate a feasible mask for non-aligned page-selective IOTLB invalidation. Apple DART IOMMU: - Fix potential NULL-ptr dereference - Set module owner" * tag 'iomm-fixes-v5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu: Make sysfs robust for non-API groups iommu/dart: Add missing module owner to ops structure iommu/dart: check return value after calling platform_get_resource() iommu/vt-d: Drop stop marker messages iommu/vt-d: Calculate mask for non-aligned flushes iommu: arm-smmu: disable large page mappings for Nvidia arm-smmu iommu/arm-smmu-v3: Fix size calculation in arm_smmu_mm_invalidate_range()
2022-05-04Merge tag 'for-linus-5.17-2' of https://github.com/cminyard/linux-ipmiLinus Torvalds2-5/+7
Pull IPMI fixes from Corey Minyard: "Fix some issues that were reported. This has been in for-next for a bit (longer than the times would indicate, I had to rebase to add some text to the headers) and these are fixes that need to go in" * tag 'for-linus-5.17-2' of https://github.com/cminyard/linux-ipmi: ipmi:ipmi_ipmb: Fix null-ptr-deref in ipmi_unregister_smi() ipmi: When handling send message responses, don't process the message
2022-05-04iommu: Make sysfs robust for non-API groupsRobin Murphy1-1/+8
Groups created by VFIO backends outside the core IOMMU API should never be passed directly into the API itself, however they still expose their standard sysfs attributes, so we can still stumble across them that way. Take care to consider those cases before jumping into our normal assumptions of a fully-initialised core API group. Fixes: 3f6634d997db ("iommu: Use right way to retrieve iommu_ops") Reported-by: Jan Stancek <[email protected]> Tested-by: Jan Stancek <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Signed-off-by: Robin Murphy <[email protected]> Link: https://lore.kernel.org/r/86ada41986988511a8424e84746dfe9ba7f87573.1651667683.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <[email protected]>
2022-05-04Merge tag 'mlx5-fixes-2022-05-03' of git://git.kernel.org/pub/scm/linux/kernel/gDavid S. Miller15-69/+173
it/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2022-05-03 This series provides bug fixes to mlx5 driver. Please pull and let me know if there is any problem. ==================== Signed-off-by: David S. Miller <[email protected]>
2022-05-04iommu/dart: Add missing module owner to ops structureHector Martin1-0/+1
This is required to make loading this as a module work. Signed-off-by: Hector Martin <[email protected]> Fixes: 46d1fb072e76 ("iommu/dart: Add DART iommu driver") Reviewed-by: Sven Peter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2022-05-04net/mlx5: Fix matching on inner TTCMark Bloch2-1/+3
The cited commits didn't use proper matching on inner TTC as a result distribution of encapsulated packets wasn't symmetric between the physical ports. Fixes: 4c71ce50d2fe ("net/mlx5: Support partial TTC rules") Fixes: 8e25a2bc6687 ("net/mlx5: Lag, add support to create TTC tables for LAG port selection") Signed-off-by: Mark Bloch <[email protected]> Reviewed-by: Maor Gottlieb <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-05-04net/mlx5: Avoid double clear or set of sync reset requestedMoshe Shemesh1-9/+19
Double clear of reset requested state can lead to NULL pointer as it will try to delete the timer twice. This can happen for example on a race between abort from FW and pci error or reset. Avoid such case using test_and_clear_bit() to verify only one time reset requested state clear flow. Similarly use test_and_set_bit() to verify only one time reset requested state set flow. Fixes: 7dd6df329d4c ("net/mlx5: Handle sync reset abort event") Signed-off-by: Moshe Shemesh <[email protected]> Reviewed-by: Maher Sanalla <[email protected]> Reviewed-by: Shay Drory <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-05-04net/mlx5: Fix deadlock in sync reset flowMoshe Shemesh1-17/+17
The sync reset flow can lead to the following deadlock when poll_sync_reset() is called by timer softirq and waiting on del_timer_sync() for the same timer. Fix that by moving the part of the flow that waits for the timer to reset_reload_work. It fixes the following kernel Trace: RIP: 0010:del_timer_sync+0x32/0x40 ... Call Trace: <IRQ> mlx5_sync_reset_clear_reset_requested+0x26/0x50 [mlx5_core] poll_sync_reset.cold+0x36/0x52 [mlx5_core] call_timer_fn+0x32/0x130 __run_timers.part.0+0x180/0x280 ? tick_sched_handle+0x33/0x60 ? tick_sched_timer+0x3d/0x80 ? ktime_get+0x3e/0xa0 run_timer_softirq+0x2a/0x50 __do_softirq+0xe1/0x2d6 ? hrtimer_interrupt+0x136/0x220 irq_exit+0xae/0xb0 smp_apic_timer_interrupt+0x7b/0x140 apic_timer_interrupt+0xf/0x20 </IRQ> Fixes: 3c5193a87b0f ("net/mlx5: Use del_timer_sync in fw reset flow of halting poll") Signed-off-by: Moshe Shemesh <[email protected]> Reviewed-by: Maher Sanalla <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-05-04net/mlx5e: Fix trust state reset in reloadMoshe Tal1-0/+10
Setting dscp2prio during the driver reload can cause dcb ieee app list to be not empty after the reload finish and as a result to a conflict between the priority trust state reported by the app and the state in the device register. Reset the dcb ieee app list on initialization in case this is conflicting with the register status. Fixes: 2a5e7a1344f4 ("net/mlx5e: Add dcbnl dscp to priority support") Signed-off-by: Moshe Tal <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-05-04net/mlx5e: Avoid checking offload capability in post_parse actionAriel Levkovich1-2/+1
During TC action parsing, the can_offload callback is called before calling the action's main parsing callback. Later on, the can_offload callback is called again before handling the action's post_parse callback if exists. Since the main parsing callback might have changed and set parsing params for the rule, following can_offload checks might fail because some parsing params were already set. Specifically, the ct action main parsing sets the ct param in the parsing status structure and when the second can_offload for ct action is called, before handling the ct post parsing, it will return an error since it checks this ct param to indicate multiple ct actions which are not supported. Therefore, the can_offload call is removed from the post parsing handling to prevent such cases. This is allowed since the first can_offload call will ensure that the action can be offloaded and the fact the code reached the post parsing handling already means that the action can be offloaded. Fixes: 8300f225268b ("net/mlx5e: Create new flow attr for multi table actions") Signed-off-by: Ariel Levkovich <[email protected]> Reviewed-by: Paul Blakey <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-05-04net/mlx5e: CT: Fix queued up restore put() executing after relevant ft releasePaul Blakey1-0/+4
__mlx5_tc_ct_entry_put() queues release of tuple related to some ct FT, if that is the last reference to that tuple, the actual deletion of the tuple can happen after the FT is already destroyed and freed. Flush the used workqueue before destroying the ct FT. Fixes: a2173131526d ("net/mlx5e: CT: manage the lifetime of the ct entry object") Reviewed-by: Oz Shlomo <[email protected]> Signed-off-by: Paul Blakey <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-05-04net/mlx5e: TC, fix decap fallback to uplink when int port not supportedAriel Levkovich1-1/+2
When resolving the decap route device for a tunnel decap rule, the result may be an OVS internal port device. Prior to adding the support for internal port offload, such case would result in using the uplink as the default decap route device which allowed devices that can't support internal port offload to offload this decap rule. This behavior got broken by adding the internal port offload which will fail in case the device can't support internal port offload. To restore the old behavior, use the uplink device as the decap route as before when internal port offload is not supported. Fixes: b16eb3c81fe2 ("net/mlx5: Support internal port as decap route device") Signed-off-by: Ariel Levkovich <[email protected]> Reviewed-by: Maor Dickman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-05-04net/mlx5e: TC, Fix ct_clear overwriting ct action metadataAriel Levkovich3-16/+49
ct_clear action is translated to clearing reg_c metadata which holds ct state and zone information using mod header actions. These actions are allocated during the actions parsing, as part of the flow attributes main mod header action list. If ct action exists in the rule, the flow's main mod header is used only in the post action table rule, after the ct tables which set the ct info in the reg_c as part of the ct actions. Therefore, if the original rule has a ct_clear action followed by a ct action, the ct action reg_c setting will be done first and will be followed by the ct_clear resetting reg_c and overwriting the ct info. Fix this by moving the ct_clear mod header actions allocation from the ct action parsing stage to the ct action post parsing stage where it is already known if ct_clear is followed by a ct action. In such case, we skip the mod header actions allocation for the ct clear since the ct action will write to reg_c anyway after clearing it. Fixes: 806401c20a0f ("net/mlx5e: CT, Fix multiple allocations and memleak of mod acts") Signed-off-by: Ariel Levkovich <[email protected]> Reviewed-by: Paul Blakey <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Reviewed-by: Maor Dickman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-05-04net/mlx5e: Lag, Don't skip fib events on current dstVlad Buslov2-8/+14
Referenced change added check to skip updating fib when new fib instance has same or lower priority. However, new fib instance can be an update on same dst address as existing one even though the structure is another instance that has different address. Ignoring events on such instances causes multipath LAG state to not be correctly updated. Track 'dst' and 'dst_len' fields of fib event fib_entry_notifier_info structure and don't skip events that have the same value of that fields. Fixes: ad11c4f1d8fd ("net/mlx5e: Lag, Only handle events from highest priority multipath entry") Signed-off-by: Vlad Buslov <[email protected]> Reviewed-by: Maor Dickman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-05-04net/mlx5e: Lag, Fix fib_info pointer assignmentVlad Buslov1-1/+1
Referenced change incorrectly sets single path fib_info even when LAG is not active. Fix it by moving call to mlx5_lag_fib_set() into conditional that verifies LAG state. Fixes: ad11c4f1d8fd ("net/mlx5e: Lag, Only handle events from highest priority multipath entry") Signed-off-by: Vlad Buslov <[email protected]> Reviewed-by: Maor Dickman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-05-04net/mlx5e: Lag, Fix use-after-free in fib event handlerVlad Buslov2-11/+20
Recent commit that modified fib route event handler to handle events according to their priority introduced use-after-free[0] in mp->mfi pointer usage. The pointer now is not just cached in order to be compared to following fib_info instances, but is also dereferenced to obtain fib_priority. However, since mlx5 lag code doesn't hold the reference to fin_info during whole mp->mfi lifetime, it could be used after fib_info instance has already been freed be kernel infrastructure code. Don't ever dereference mp->mfi pointer. Refactor it to be 'const void*' type and cache fib_info priority in dedicated integer. Group fib_info-related data into dedicated 'fib' structure that will be further extended by following patches in the series. [0]: [ 203.588029] ================================================================== [ 203.590161] BUG: KASAN: use-after-free in mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core] [ 203.592386] Read of size 4 at addr ffff888144df2050 by task kworker/u20:4/138 [ 203.594766] CPU: 3 PID: 138 Comm: kworker/u20:4 Tainted: G B 5.17.0-rc7+ #6 [ 203.596751] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 203.598813] Workqueue: mlx5_lag_mp mlx5_lag_fib_update [mlx5_core] [ 203.600053] Call Trace: [ 203.600608] <TASK> [ 203.601110] dump_stack_lvl+0x48/0x5e [ 203.601860] print_address_description.constprop.0+0x1f/0x160 [ 203.602950] ? mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core] [ 203.604073] ? mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core] [ 203.605177] kasan_report.cold+0x83/0xdf [ 203.605969] ? mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core] [ 203.607102] mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core] [ 203.608199] ? mlx5_lag_init_fib_work+0x1c0/0x1c0 [mlx5_core] [ 203.609382] ? read_word_at_a_time+0xe/0x20 [ 203.610463] ? strscpy+0xa0/0x2a0 [ 203.611463] process_one_work+0x722/0x1270 [ 203.612344] worker_thread+0x540/0x11e0 [ 203.613136] ? rescuer_thread+0xd50/0xd50 [ 203.613949] kthread+0x26e/0x300 [ 203.614627] ? kthread_complete_and_exit+0x20/0x20 [ 203.615542] ret_from_fork+0x1f/0x30 [ 203.616273] </TASK> [ 203.617174] Allocated by task 3746: [ 203.617874] kasan_save_stack+0x1e/0x40 [ 203.618644] __kasan_kmalloc+0x81/0xa0 [ 203.619394] fib_create_info+0xb41/0x3c50 [ 203.620213] fib_table_insert+0x190/0x1ff0 [ 203.621020] fib_magic.isra.0+0x246/0x2e0 [ 203.621803] fib_add_ifaddr+0x19f/0x670 [ 203.622563] fib_inetaddr_event+0x13f/0x270 [ 203.623377] blocking_notifier_call_chain+0xd4/0x130 [ 203.624355] __inet_insert_ifa+0x641/0xb20 [ 203.625185] inet_rtm_newaddr+0xc3d/0x16a0 [ 203.626009] rtnetlink_rcv_msg+0x309/0x880 [ 203.626826] netlink_rcv_skb+0x11d/0x340 [ 203.627626] netlink_unicast+0x4cc/0x790 [ 203.628430] netlink_sendmsg+0x762/0xc00 [ 203.629230] sock_sendmsg+0xb2/0xe0 [ 203.629955] ____sys_sendmsg+0x58a/0x770 [ 203.630756] ___sys_sendmsg+0xd8/0x160 [ 203.631523] __sys_sendmsg+0xb7/0x140 [ 203.632294] do_syscall_64+0x35/0x80 [ 203.633045] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 203.634427] Freed by task 0: [ 203.635063] kasan_save_stack+0x1e/0x40 [ 203.635844] kasan_set_track+0x21/0x30 [ 203.636618] kasan_set_free_info+0x20/0x30 [ 203.637450] __kasan_slab_free+0xfc/0x140 [ 203.638271] kfree+0x94/0x3b0 [ 203.638903] rcu_core+0x5e4/0x1990 [ 203.639640] __do_softirq+0x1ba/0x5d3 [ 203.640828] Last potentially related work creation: [ 203.641785] kasan_save_stack+0x1e/0x40 [ 203.642571] __kasan_record_aux_stack+0x9f/0xb0 [ 203.643478] call_rcu+0x88/0x9c0 [ 203.644178] fib_release_info+0x539/0x750 [ 203.644997] fib_table_delete+0x659/0xb80 [ 203.645809] fib_magic.isra.0+0x1a3/0x2e0 [ 203.646617] fib_del_ifaddr+0x93f/0x1300 [ 203.647415] fib_inetaddr_event+0x9f/0x270 [ 203.648251] blocking_notifier_call_chain+0xd4/0x130 [ 203.649225] __inet_del_ifa+0x474/0xc10 [ 203.650016] devinet_ioctl+0x781/0x17f0 [ 203.650788] inet_ioctl+0x1ad/0x290 [ 203.651533] sock_do_ioctl+0xce/0x1c0 [ 203.652315] sock_ioctl+0x27b/0x4f0 [ 203.653058] __x64_sys_ioctl+0x124/0x190 [ 203.653850] do_syscall_64+0x35/0x80 [ 203.654608] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 203.666952] The buggy address belongs to the object at ffff888144df2000 which belongs to the cache kmalloc-256 of size 256 [ 203.669250] The buggy address is located 80 bytes inside of 256-byte region [ffff888144df2000, ffff888144df2100) [ 203.671332] The buggy address belongs to the page: [ 203.672273] page:00000000bf6c9314 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x144df0 [ 203.674009] head:00000000bf6c9314 order:2 compound_mapcount:0 compound_pincount:0 [ 203.675422] flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff) [ 203.676819] raw: 002ffff800010200 0000000000000000 dead000000000122 ffff888100042b40 [ 203.678384] raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000 [ 203.679928] page dumped because: kasan: bad access detected [ 203.681455] Memory state around the buggy address: [ 203.682421] ffff888144df1f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 203.683863] ffff888144df1f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 203.685310] >ffff888144df2000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 203.686701] ^ [ 203.687820] ffff888144df2080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 203.689226] ffff888144df2100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 203.690620] ================================================================== Fixes: ad11c4f1d8fd ("net/mlx5e: Lag, Only handle events from highest priority multipath entry") Signed-off-by: Vlad Buslov <[email protected]> Reviewed-by: Maor Dickman <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-05-04net/mlx5e: Fix the calling of update_buffer_lossy() APIMark Zhang1-2/+2
The arguments of update_buffer_lossy() is in a wrong order. Fix it. Fixes: 88b3d5c90e96 ("net/mlx5e: Fix port buffers cell size value") Signed-off-by: Mark Zhang <[email protected]> Reviewed-by: Maor Gottlieb <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-05-04net/mlx5e: Don't match double-vlan packets if cvlan is not setVlad Buslov1-0/+11
Currently, match VLAN rule also matches packets that have multiple VLAN headers. This behavior is similar to buggy flower classifier behavior that has recently been fixed. Fix the issue by matching on outer_second_cvlan_tag with value 0 which will cause the HW to verify the packet doesn't contain second vlan header. Fixes: 699e96ddf47f ("net/mlx5e: Support offloading tc double vlan headers match") Signed-off-by: Vlad Buslov <[email protected]> Reviewed-by: Maor Dickman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-05-04net/mlx5: Fix slab-out-of-bounds while reading resource dump menuAya Levin1-6/+25
Resource dump menu may span over more than a single page, support it. Otherwise, menu read may result in a memory access violation: reading outside of the allocated page. Note that page format of the first menu page contains menu headers while the proceeding menu pages contain only records. The KASAN logs are as follows: BUG: KASAN: slab-out-of-bounds in strcmp+0x9b/0xb0 Read of size 1 at addr ffff88812b2e1fd0 by task systemd-udevd/496 CPU: 5 PID: 496 Comm: systemd-udevd Tainted: G B 5.16.0_for_upstream_debug_2022_01_10_23_12 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x57/0x7d print_address_description.constprop.0+0x1f/0x140 ? strcmp+0x9b/0xb0 ? strcmp+0x9b/0xb0 kasan_report.cold+0x83/0xdf ? strcmp+0x9b/0xb0 strcmp+0x9b/0xb0 mlx5_rsc_dump_init+0x4ab/0x780 [mlx5_core] ? mlx5_rsc_dump_destroy+0x80/0x80 [mlx5_core] ? lockdep_hardirqs_on_prepare+0x286/0x400 ? raw_spin_unlock_irqrestore+0x47/0x50 ? aomic_notifier_chain_register+0x32/0x40 mlx5_load+0x104/0x2e0 [mlx5_core] mlx5_init_one+0x41b/0x610 [mlx5_core] .... The buggy address belongs to the object at ffff88812b2e0000 which belongs to the cache kmalloc-4k of size 4096 The buggy address is located 4048 bytes to the right of 4096-byte region [ffff88812b2e0000, ffff88812b2e1000) The buggy address belongs to the page: page:000000009d69807a refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88812b2e6000 pfn:0x12b2e0 head:000000009d69807a order:3 compound_mapcount:0 compound_pincount:0 flags: 0x8000000000010200(slab|head|zone=2) raw: 8000000000010200 0000000000000000 dead000000000001 ffff888100043040 raw: ffff88812b2e6000 0000000080040000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88812b2e1e80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88812b2e1f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88812b2e1f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff88812b2e2000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88812b2e2080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Fixes: 12206b17235a ("net/mlx5: Add support for resource dump") Signed-off-by: Aya Levin <[email protected]> Reviewed-by: Moshe Shemesh <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-05-04net/mlx5e: Fix wrong source vport matching on tunnel ruleAriel Levkovich1-1/+1
When OVS internal port is the vtep device, the first decap rule is matching on the internal port's vport metadata value and then changes the metadata to be the uplink's value. Therefore, following rules on the tunnel, in chain > 0, should avoid matching on internal port metadata and use the uplink vport metadata instead. Select the uplink's metadata value for the source vport match in case the rule is in chain greater than zero, even if the tunnel route device is internal port. Fixes: 166f431ec6be ("net/mlx5e: Add indirect tc offload of ovs internal port") Signed-off-by: Ariel Levkovich <[email protected]> Reviewed-by: Maor Dickman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-05-03Merge branch 'bnxt_en-bug-fixes'Jakub Kicinski2-13/+15
Michael Chan says: ==================== bnxt_en: Bug fixes This patch series includes 3 fixes: - Fix an occasional VF open failure. - Fix a PTP spinlock usage before initialization - Fix unnecesary RX packet drops under high TX traffic load. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-03bnxt_en: Fix unnecessary dropping of RX packetsMichael Chan1-0/+4
In bnxt_poll_p5(), we first check cpr->has_more_work. If it is true, we are in NAPI polling mode and we will call __bnxt_poll_cqs() to continue polling. It is possible to exhanust the budget again when __bnxt_poll_cqs() returns. We then enter the main while loop to check for new entries in the NQ. If we had previously exhausted the NAPI budget, we may call __bnxt_poll_work() to process an RX entry with zero budget. This will cause packets to be dropped unnecessarily, thinking that we are in the netpoll path. Fix it by breaking out of the while loop if we need to process an RX NQ entry with no budget left. We will then exit NAPI and stay in polling mode. Fixes: 389a877a3b20 ("bnxt_en: Process the NQ under NAPI continuous polling.") Reviewed-by: Andy Gospodarek <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-03bnxt_en: Initiallize bp->ptp_lock first before using itMichael Chan1-8/+7
bnxt_ptp_init() calls bnxt_ptp_init_rtc() which will acquire the ptp_lock spinlock. The spinlock is not initialized until later. Move the bnxt_ptp_init_rtc() call after the spinlock is initialized. Fixes: 24ac1ecd5240 ("bnxt_en: Add driver support to use Real Time Counter for PTP") Reviewed-by: Pavan Chebbi <[email protected]> Reviewed-by: Saravanan Vajravel <[email protected]> Reviewed-by: Andy Gospodarek <[email protected]> Reviewed-by: Somnath Kotur <[email protected]> Reviewed-by: Damodharam Ammepalli <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-03bnxt_en: Fix possible bnxt_open() failure caused by wrong RFS flagSomnath Kotur1-5/+4
bnxt_open() can fail in this code path, especially on a VF when it fails to reserve default rings: bnxt_open() __bnxt_open_nic() bnxt_clear_int_mode() bnxt_init_dflt_ring_mode() RX rings would be set to 0 when we hit this error path. It is possible for a subsequent bnxt_open() call to potentially succeed with a code path like this: bnxt_open() bnxt_hwrm_if_change() bnxt_fw_init_one() bnxt_fw_init_one_p3() bnxt_set_dflt_rfs() bnxt_rfs_capable() bnxt_hwrm_reserve_rings() On older chips, RFS is capable if we can reserve the number of vnics that is equal to RX rings + 1. But since RX rings is still set to 0 in this code path, we may mistakenly think that RFS is supported for 0 RX rings. Later, when the default RX rings are reserved and we try to enable RFS, it would fail and cause bnxt_open() to fail unnecessarily. We fix this in 2 places. bnxt_rfs_capable() will always return false if RX rings is not yet set. bnxt_init_dflt_ring_mode() will call bnxt_set_dflt_rfs() which will always clear the RFS flags if RFS is not supported. Fixes: 20d7d1c5c9b1 ("bnxt_en: reliably allocate IRQ table on reset to avoid crash") Signed-off-by: Somnath Kotur <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-03smsc911x: allow using IRQ0Sergey Shtylyov1-1/+1
The AlphaProject AP-SH4A-3A/AP-SH4AD-0A SH boards use IRQ0 for their SMSC LAN911x Ethernet chip, so the networking on them must have been broken by commit 965b2aa78fbc ("net/smsc911x: fix irq resource allocation failure") which filtered out 0 as well as the negative error codes -- it was kinda correct at the time, as platform_get_irq() could return 0 on of_irq_get() failure and on the actual 0 in an IRQ resource. This issue was fixed by me (back in 2016!), so we should be able to fix this driver to allow IRQ0 usage again... When merging this to the stable kernels, make sure you also merge commit e330b9a6bb35 ("platform: don't return 0 from platform_get_irq[_byname]() on error") -- that's my fix to platform_get_irq() for the DT platforms... Fixes: 965b2aa78fbc ("net/smsc911x: fix irq resource allocation failure") Signed-off-by: Sergey Shtylyov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-03net: sfp: Add tx-fault workaround for Huawei MA5671A SFP ONTMatthew Hagan1-1/+11
As noted elsewhere, various GPON SFP modules exhibit non-standard TX-fault behaviour. In the tested case, the Huawei MA5671A, when used in combination with a Marvell mv88e6085 switch, was found to persistently assert TX-fault, resulting in the module being disabled. This patch adds a quirk to ignore the SFP_F_TX_FAULT state, allowing the module to function. Change from v1: removal of erroneous return statment (Andrew Lunn) Signed-off-by: Matthew Hagan <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-03Merge tag 'seccomp-v5.18-rc6' of ↵Linus Torvalds1-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp selftest fix from Kees Cook: - Avoid using stdin for read syscall testing (Jann Horn) * tag 'seccomp-v5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: selftests/seccomp: Don't call read() on TTY from background pgrp
2022-05-03Merge tag 'hwmon-for-v5.18-rc6' of ↵Linus Torvalds7-10/+29
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Work around a hardware problem in the delta-ahe50dc-fan driver - Explicitly disable PEC in PMBus core if not enabled - Fix negative temperature values in f71882fg driver - Fix warning on removal of adt7470 driver - Fix CROSSHAIR VI HERO name in asus_wmi_sensors driver - Fix build warning seen in xdpe12284 driver if CONFIG_SENSORS_XDPE122_REGULATOR is disabled - Fix type of 'ti,n-factor' in ti,tmp421 driver bindings * tag 'hwmon-for-v5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (pmbus) delta-ahe50dc-fan: work around hardware quirk hwmon: (pmbus) disable PEC if not enabled hwmon: (f71882fg) Fix negative temperature dt-bindings: hwmon: ti,tmp421: Fix type for 'ti,n-factor' hwmon: (adt7470) Fix warning on module removal hwmon: (asus_wmi_sensors) Fix CROSSHAIR VI HERO name hwmon: (xdpe12284) Fix build warning seen if CONFIG_SENSORS_XDPE122_REGULATOR is disabled
2022-05-03net: rds: acquire refcount on TCP socketsTetsuo Handa1-0/+8
syzbot is reporting use-after-free read in tcp_retransmit_timer() [1], for TCP socket used by RDS is accessing sock_net() without acquiring a refcount on net namespace. Since TCP's retransmission can happen after a process which created net namespace terminated, we need to explicitly acquire a refcount. Link: https://syzkaller.appspot.com/bug?extid=694120e1002c117747ed [1] Reported-by: syzbot <[email protected]> Fixes: 26abe14379f8e2fa ("net: Modify sk_alloc to not reference count the netns of kernel sockets.") Fixes: 8a68173691f03661 ("net: sk_clone_lock() should only do get_net() if the parent is not a kernel socket") Signed-off-by: Tetsuo Handa <[email protected]> Tested-by: syzbot <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-05-03selftests/net: so_txtime: usage(): fix documentation of default clockMarc Kleine-Budde1-1/+1
The program uses CLOCK_TAI as default clock since it was added to the Linux repo. In commit: | 040806343bb4 ("selftests/net: so_txtime multi-host support") a help text stating the wrong default clock was added. This patch fixes the help text. Fixes: 040806343bb4 ("selftests/net: so_txtime multi-host support") Cc: Carlos Llamas <[email protected]> Cc: Willem de Bruijn <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]> Acked-by: Willem de Bruijn <[email protected]> Reviewed-by: Carlos Llamas <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-05-03selftests/net: so_txtime: fix parsing of start time stamp on 32 bit systemsMarc Kleine-Budde1-1/+1
This patch fixes the parsing of the cmd line supplied start time on 32 bit systems. A "long" on 32 bit systems is only 32 bit wide and cannot hold a timestamp in nano second resolution. Fixes: 040806343bb4 ("selftests/net: so_txtime multi-host support") Cc: Carlos Llamas <[email protected]> Cc: Willem de Bruijn <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]> Acked-by: Willem de Bruijn <[email protected]> Reviewed-by: Carlos Llamas <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-05-03selftests: mirror_gre_bridge_1q: Avoid changing PVID while interface is ↵Ido Schimmel1-0/+3
operational In emulated environments, the bridge ports enslaved to br1 get a carrier before changing br1's PVID. This means that by the time the PVID is changed, br1 is already operational and configured with an IPv6 link-local address. When the test is run with netdevs registered by mlxsw, changing the PVID is vetoed, as changing the VID associated with an existing L3 interface is forbidden. This restriction is similar to the 8021q driver's restriction of changing the VID of an existing interface. Fix this by taking br1 down and bringing it back up when it is fully configured. With this fix, the test reliably passes on top of both the SW and HW data paths (emulated or not). Fixes: 239e754af854 ("selftests: forwarding: Test mirror-to-gretap w/ UL 802.1q") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-05-03Merge branch 'emaclite-improve-error-handling-and-minor-cleanup'Paolo Abeni1-18/+12
Radhey Shyam Pandey says: ==================== emaclite: improve error handling and minor cleanup This patchset does error handling for of_address_to_resource() and also removes "Don't advertise 1000BASE-T" and auto negotiation. Changes for v3: - Resolve git apply conflicts for 2/2 patch. Changes for v2: - Added Andrew's reviewed by tag in 1/2 patch. - Move ret to down to align with reverse xmas tree style in 2/2 patch. - Also add fixes tag in 2/2 patch. - Specify tree name in subject prefix. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-05-03net: emaclite: Add error handling for of_address_to_resource()Shravya Kumbham1-3/+12
check the return value of of_address_to_resource() and also add missing of_node_put() for np and npp nodes. Fixes: e0a3bc65448c ("net: emaclite: Support multiple phys connected to one MDIO bus") Addresses-Coverity: Event check_return value. Signed-off-by: Shravya Kumbham <[email protected]> Signed-off-by: Radhey Shyam Pandey <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2022-05-03net: emaclite: Don't advertise 1000BASE-T and do auto negotiationShravya Kumbham1-15/+0
In xemaclite_open() function we are setting the max speed of emaclite to 100Mb using phy_set_max_speed() function so, there is no need to write the advertising registers to stop giga-bit speed and the phy_start() function starts the auto-negotiation so, there is no need to handle it separately using advertising registers. Remove the phy_read and phy_write of advertising registers in xemaclite_open() function. Signed-off-by: Shravya Kumbham <[email protected]> Signed-off-by: Radhey Shyam Pandey <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2022-05-02Merge tag 'for-5.18-rc5-tag' of ↵Linus Torvalds6-23/+91
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "A few more fixes mostly around how some file attributes could be set. - fix handling of compression property: - don't allow setting it on anything else than regular file or directory - do not allow setting it on nodatacow files via properties - improved error handling when setting xattr - make sure symlinks are always properly logged" * tag 'for-5.18-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: skip compression property for anything other than files and dirs btrfs: do not BUG_ON() on failure to update inode when setting xattr btrfs: always log symlinks in full mode btrfs: do not allow compression on nodatacow files btrfs: export a helper for compression hard check
2022-05-01Linux 5.18-rc5Linus Torvalds1-1/+1
2022-05-01Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds18-62/+214
Pull kvm fixes from Paolo Bonzini: "ARM: - Take care of faults occuring between the PARange and IPA range by injecting an exception - Fix S2 faults taken from a host EL0 in protected mode - Work around Oops caused by a PMU access from a 32bit guest when PMU has been created. This is a temporary bodge until we fix it for good. x86: - Fix potential races when walking host page table - Fix shadow page table leak when KVM runs nested - Work around bug in userspace when KVM synthesizes leaf 0x80000021 on older (pre-EPYC) or Intel processors Generic (but affects only RISC-V): - Fix bad user ABI for KVM_EXIT_SYSTEM_EVENT" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: work around QEMU issue with synthetic CPUID leaves Revert "x86/mm: Introduce lookup_address_in_mm()" KVM: x86/mmu: fix potential races when walking host page table KVM: fix bad user ABI for KVM_EXIT_SYSTEM_EVENT KVM: x86/mmu: Do not create SPTEs for GFNs that exceed host.MAXPHYADDR KVM: arm64: Inject exception on out-of-IPA-range translation fault KVM/arm64: Don't emulate a PMU for 32-bit guests if feature not set KVM: arm64: Handle host stage-2 faults from 32-bit EL0
2022-05-01Merge tag 'x86_urgent_for_v5.18_rc5' of ↵Linus Torvalds21-29/+63
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - A fix to disable PCI/MSI[-X] masking for XEN_HVM guests as that is solely controlled by the hypervisor - A build fix to make the function prototype (__warn()) as visible as the definition itself - A bunch of objtool annotation fixes which have accumulated over time - An ORC unwinder fix to handle bad input gracefully - Well, we thought the microcode gets loaded in time in order to restore the microcode-emulated MSRs but we thought wrong. So there's a fix for that to have the ordering done properly - Add new Intel model numbers - A spelling fix * tag 'x86_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/pci/xen: Disable PCI/MSI[-X] masking for XEN_HVM guests bug: Have __warn() prototype defined unconditionally x86/Kconfig: fix the spelling of 'becoming' in X86_KERNEL_IBT config objtool: Use offstr() to print address of missing ENDBR objtool: Print data address for "!ENDBR" data warnings x86/xen: Add ANNOTATE_NOENDBR to startup_xen() x86/uaccess: Add ENDBR to __put_user_nocheck*() x86/retpoline: Add ANNOTATE_NOENDBR for retpolines x86/static_call: Add ANNOTATE_NOENDBR to static call trampoline objtool: Enable unreachable warnings for CLANG LTO x86,objtool: Explicitly mark idtentry_body()s tail REACHABLE x86,objtool: Mark cpu_startup_entry() __noreturn x86,xen,objtool: Add UNWIND hint lib/strn*,objtool: Enforce user_access_begin() rules MAINTAINERS: Add x86 unwinding entry x86/unwind/orc: Recheck address range after stack info was updated x86/cpu: Load microcode during restore_processor_state() x86/cpu: Add new Alderlake and Raptorlake CPU model numbers
2022-05-01net: dsa: b53: convert to phylink_pcsRussell King (Oracle)5-72/+75
Convert B53 to use phylink_pcs for the serdes rather than hooking it into the MAC-layer callbacks. Fixes: 81c1681cbb9f ("net: dsa: b53: mark as non-legacy") Reviewed-by: Florian Fainelli <[email protected]> Tested-by: Florian Fainelli <[email protected]> Signed-off-by: Russell King (Oracle) <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-05-01Merge tag 'objtool_urgent_for_v5.18_rc5' of ↵Linus Torvalds6-99/+265
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fixes from Borislav Petkov: "A bunch of objtool fixes to improve unwinding, sibling call detection, fallthrough detection and relocation handling of weak symbols when the toolchain strips section symbols" * tag 'objtool_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix code relocs vs weak symbols objtool: Fix type of reloc::addend objtool: Fix function fallthrough detection for vmlinux objtool: Fix sibling call detection in alternatives objtool: Don't set 'jump_dest' for sibling calls x86/uaccess: Don't jump between functions
2022-05-01Merge tag 'irq_urgent_for_v5.18_rc5' of ↵Linus Torvalds1-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Borislav Petkov: - Fix locking when accessing device MSI descriptors * tag 'irq_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: bus: fsl-mc-msi: Fix MSI descriptor mutex lock for msi_first_desc()
Powered by cgit, Gruvboxed by Blaster4385.