Merge branch 'emaclite-improve-error-handling-and-minor-cleanup'

Radhey Shyam Pandey says:

====================
emaclite: improve error handling and minor cleanup

This patchset does error handling for of_address_to_resource() and also
removes "Don't advertise 1000BASE-T" and auto negotiation.

Changes for v3:
- Resolve git apply conflicts for 2/2 patch.

Changes for v2:
- Added Andrew's reviewed by tag in 1/2 patch.
- Move ret to down to align with reverse xmas tree style in 2/2 patch.
- Also add fixes tag in 2/2 patch.
- Specify tree name in subject prefix.
====================

Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>

1 files changed, 12 insertions, 18 deletions

diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
index 57a24f62e353..d770b3ac3f74 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -823,10 +823,10 @@ static int xemaclite_mdio_write(struct mii_bus *bus, int phy_id, int reg,
 static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev)
 {
 	struct mii_bus *bus;
-	int rc;
 	struct resource res;
 	struct device_node *np = of_get_parent(lp->phy_node);
 	struct device_node *npp;
+	int rc, ret;
 
 	/* Don't register the MDIO bus if the phy_node or its parent node
 	 * can't be found.
@@ -836,8 +836,14 @@ static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev)
 		return -ENODEV;
 	}
 	npp = of_get_parent(np);
-
-	of_address_to_resource(npp, 0, &res);
+	ret = of_address_to_resource(npp, 0, &res);
+	of_node_put(npp);
+	if (ret) {
+		dev_err(dev, "%s resource error!\n",
+			dev->of_node->full_name);
+		of_node_put(np);
+		return ret;
+	}
 	if (lp->ndev->mem_start != res.start) {
 		struct phy_device *phydev;
 		phydev = of_phy_find_device(lp->phy_node);
@@ -846,6 +852,7 @@ static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev)
 				 "MDIO of the phy is not registered yet\n");
 		else
 			put_device(&phydev->mdio.dev);
+		of_node_put(np);
 		return 0;
 	}
 
@@ -858,6 +865,7 @@ static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev)
 	bus = mdiobus_alloc();
 	if (!bus) {
 		dev_err(dev, "Failed to allocate mdiobus\n");
+		of_node_put(np);
 		return -ENOMEM;
 	}
 
@@ -870,6 +878,7 @@ static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev)
 	bus->parent = dev;
 
 	rc = of_mdiobus_register(bus, np);
+	of_node_put(np);
 	if (rc) {
 		dev_err(dev, "Failed to register mdio bus.\n");
 		goto err_register;
@@ -926,8 +935,6 @@ static int xemaclite_open(struct net_device *dev)
 	xemaclite_disable_interrupts(lp);
 
 	if (lp->phy_node) {
-		u32 bmcr;
-
 		lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node,
 					     xemaclite_adjust_link, 0,
 					     PHY_INTERFACE_MODE_MII);
@@ -938,19 +945,6 @@ static int xemaclite_open(struct net_device *dev)
 
 		/* EmacLite doesn't support giga-bit speeds */
 		phy_set_max_speed(lp->phy_dev, SPEED_100);
-
-		/* Don't advertise 1000BASE-T Full/Half duplex speeds */
-		phy_write(lp->phy_dev, MII_CTRL1000, 0);
-
-		/* Advertise only 10 and 100mbps full/half duplex speeds */
-		phy_write(lp->phy_dev, MII_ADVERTISE, ADVERTISE_ALL |
-			  ADVERTISE_CSMA);
-
-		/* Restart auto negotiation */
-		bmcr = phy_read(lp->phy_dev, MII_BMCR);
-		bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
-		phy_write(lp->phy_dev, MII_BMCR, bmcr);
-
 		phy_start(lp->phy_dev);
 	}