aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-02-06pinctrl: qcom: sm8450-lpass-lpi: correct swr_rx_data groupKrzysztof Kozlowski1-1/+1
According to hardware programming guide, the swr_rx_data pin group has only two pins (GPIO5 and GPIO6). This is also visible in "struct sm8450_groups" in the driver - GPIO15 does not have swr_rx_data function. Fixes: ec1652fc4d56 ("pinctrl: qcom: Add sm8450 lpass lpi pinctrl driver") Cc: <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]>
2023-02-06powerpc/kexec_file: fix implicit decl errorRandy Dunlap1-0/+1
kexec (PPC64) code calls memory_hotplug_max(). Add the header declaration for it from <asm/mmzone.h>. Using <linux/mmzone.h> does not work since the #include for <asm/mmzone.h> depends on CONFIG_NUMA=y, which is not always set. Fixes this build error/warning: arch/powerpc/kexec/file_load_64.c: In function 'kexec_extra_fdt_size_ppc64': arch/powerpc/kexec/file_load_64.c:993:33: error: implicit declaration of function 'memory_hotplug_max' 993 | usm_entries = ((memory_hotplug_max() / drmem_lmb_size()) + | ^~~~~~~~~~~~~~~~~~ Fixes: fc546faa5595 ("powerpc/kexec_file: Count hot-pluggable memory in FDT estimate") Signed-off-by: Randy Dunlap <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-02-06RDMA/mana_ib: Prevent array underflow in mana_ib_create_qp_raw()Dan Carpenter1-1/+1
The "port" comes from the user and if it is zero then the: ndev = mc->ports[port - 1]; assignment does an out of bounds read. I have changed the if statement to fix this and to mirror how it is done in mana_ib_create_qp_rss(). Fixes: 0266a177631d ("RDMA/mana_ib: Add a driver for Microsoft Azure Network Adapter") Signed-off-by: Dan Carpenter <[email protected]> Link: https://lore.kernel.org/r/Y8/3Vn8qx00kE9Kk@kili Acked-by: Long Li <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]>
2023-02-06HID: amd_sfh: if no sensors are enabled, clean upMario Limonciello2-2/+12
It was reported that commit b300667b33b2 ("HID: amd_sfh: Disable the interrupt for all command") had caused increased resume time on HP Envy x360. Before this commit 3 sensors were reported, but they were not actually functional. After this commit the sensors are no longer reported, but also the resume time increased. To avoid this problem explicitly look for the number of disabled sensors. If all the sensors are disabled, clean everything up. Fixes: b300667b33b2 ("HID: amd_sfh: Disable the interrupt for all command") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2115 Reported-by: Xaver Hugl <[email protected]> Signed-off-by: Mario Limonciello <[email protected]> Acked-by: Basavaraj Natikar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Benjamin Tissoires <[email protected]>
2023-02-06net: USB: Fix wrong-direction WARNING in plusb.cAlan Stern1-3/+1
The syzbot fuzzer detected a bug in the plusb network driver: A zero-length control-OUT transfer was treated as a read instead of a write. In modern kernels this error provokes a WARNING: usb 1-1: BOGUS control dir, pipe 80000280 doesn't match bRequestType c0 WARNING: CPU: 0 PID: 4645 at drivers/usb/core/urb.c:411 usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411 Modules linked in: CPU: 1 PID: 4645 Comm: dhcpcd Not tainted 6.2.0-rc6-syzkaller-00050-g9f266ccaa2f5 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023 RIP: 0010:usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411 ... Call Trace: <TASK> usb_start_wait_urb+0x101/0x4b0 drivers/usb/core/message.c:58 usb_internal_control_msg drivers/usb/core/message.c:102 [inline] usb_control_msg+0x320/0x4a0 drivers/usb/core/message.c:153 __usbnet_read_cmd+0xb9/0x390 drivers/net/usb/usbnet.c:2010 usbnet_read_cmd+0x96/0xf0 drivers/net/usb/usbnet.c:2068 pl_vendor_req drivers/net/usb/plusb.c:60 [inline] pl_set_QuickLink_features drivers/net/usb/plusb.c:75 [inline] pl_reset+0x2f/0xf0 drivers/net/usb/plusb.c:85 usbnet_open+0xcc/0x5d0 drivers/net/usb/usbnet.c:889 __dev_open+0x297/0x4d0 net/core/dev.c:1417 __dev_change_flags+0x587/0x750 net/core/dev.c:8530 dev_change_flags+0x97/0x170 net/core/dev.c:8602 devinet_ioctl+0x15a2/0x1d70 net/ipv4/devinet.c:1147 inet_ioctl+0x33f/0x380 net/ipv4/af_inet.c:979 sock_do_ioctl+0xcc/0x230 net/socket.c:1169 sock_ioctl+0x1f8/0x680 net/socket.c:1286 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x197/0x210 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The fix is to call usbnet_write_cmd() instead of usbnet_read_cmd() and remove the USB_DIR_IN flag. Reported-and-tested-by: [email protected] Signed-off-by: Alan Stern <[email protected]> Fixes: 090ffa9d0e90 ("[PATCH] USB: usbnet (9/9) module for pl2301/2302 cables") CC: [email protected] Link: https://lore.kernel.org/r/[email protected]/ Signed-off-by: David S. Miller <[email protected]>
2023-02-06HID: logitech: Disable hi-res scrolling on USBBastien Nocera1-1/+2
On some Logitech mice, such as the G903, and possibly the G403, the HID events are generated on a different interface to the HID++ one. If we enable hi-res through the HID++ interface, the HID interface wouldn't know anything about it, and handle the events as if they were regular scroll events, making the mouse unusable. Disable hi-res scrolling on those devices until we implement scroll events through HID++. Signed-off-by: Bastien Nocera <[email protected]> Tested-by: Tobias Klausmann <[email protected]> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216885 Fixes: 908d325e1665 ("HID: logitech-hidpp: Detect hi-res scrolling support") Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Benjamin Tissoires <[email protected]>
2023-02-06HID: core: Fix deadloop in hid_apply_multiplier.Xin Zhao1-0/+3
The initial value of hid->collection[].parent_idx if 0. When Report descriptor doesn't contain "HID Collection", the value remains as 0. In the meanwhile, when the Report descriptor fullfill all following conditions, it will trigger hid_apply_multiplier function call. 1. Usage page is Generic Desktop Ctrls (0x01) 2. Usage is RESOLUTION_MULTIPLIER (0x48) 3. Contain any FEATURE items The while loop in hid_apply_multiplier will search the top-most collection by searching parent_idx == -1. Because all parent_idx is 0. The loop will run forever. There is a Report Descriptor triggerring the deadloop 0x05, 0x01, // Usage Page (Generic Desktop Ctrls) 0x09, 0x48, // Usage (0x48) 0x95, 0x01, // Report Count (1) 0x75, 0x08, // Report Size (8) 0xB1, 0x01, // Feature Signed-off-by: Xin Zhao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Benjamin Tissoires <[email protected]>
2023-02-06net: microchip: sparx5: fix PTP init/deinit not checking all portsCasper Andersson1-2/+2
Check all ports instead of just port_count ports. PTP init was only checking ports 0 to port_count. If the hardware ports are not mapped starting from 0 then they would be missed, e.g. if only ports 20-30 were mapped it would attempt to init ports 0-10, resulting in NULL pointers when attempting to timestamp. Now it will init all mapped ports. Fixes: 70dfe25cd866 ("net: sparx5: Update extraction/injection for timestamping") Signed-off-by: Casper Andersson <[email protected]> Reviewed-by: Horatiu Vultur <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-02-06uapi: add missing ip/ipv6 header dependencies for linux/stddef.hHerton R. Krzesinski2-0/+2
Since commit 58e0be1ef6118 ("net: use struct_group to copy ip/ipv6 header addresses"), ip and ipv6 headers started to use the __struct_group definition, which is defined at include/uapi/linux/stddef.h. However, linux/stddef.h isn't explicitly included in include/uapi/linux/{ip,ipv6}.h, which breaks build of xskxceiver bpf selftest if you install the uapi headers in the system: $ make V=1 xskxceiver -C tools/testing/selftests/bpf ... make: Entering directory '(...)/tools/testing/selftests/bpf' gcc -g -O0 -rdynamic -Wall -Werror (...) In file included from xskxceiver.c:79: /usr/include/linux/ip.h:103:9: error: expected specifier-qualifier-list before ‘__struct_group’ 103 | __struct_group(/* no tag */, addrs, /* no attrs */, | ^~~~~~~~~~~~~~ ... Include the missing <linux/stddef.h> dependency in ip.h and do the same for the ipv6.h header. Fixes: 58e0be1ef611 ("net: use struct_group to copy ip/ipv6 header addresses") Signed-off-by: Herton R. Krzesinski <[email protected]> Reviewed-by: Carlos O'Donell <[email protected]> Tested-by: Carlos O'Donell <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-02-06neigh: make sure used and confirmed times are validJulian Anastasov1-3/+15
Entries can linger in cache without timer for days, thanks to the gc_thresh1 limit. As result, without traffic, the confirmed time can be outdated and to appear to be in the future. Later, on traffic, NUD_STALE entries can switch to NUD_DELAY and start the timer which can see the invalid confirmed time and wrongly switch to NUD_REACHABLE state instead of NUD_PROBE. As result, timer is set many days in the future. This is more visible on 32-bit platforms, with higher HZ value. Why this is a problem? While we expect unused entries to expire, such entries stay in REACHABLE state for too long, locked in cache. They are not expired normally, only when cache is full. Problem and the wrong state change reported by Zhang Changzhong: 172.16.1.18 dev bond0 lladdr 0a:0e:0f:01:12:01 ref 1 used 350521/15994171/350520 probes 4 REACHABLE 350520 seconds have elapsed since this entry was last updated, but it is still in the REACHABLE state (base_reachable_time_ms is 30000), preventing lladdr from being updated through probe. Fix it by ensuring timer is started with valid used/confirmed times. Considering the valid time range is LONG_MAX jiffies, we try not to go too much in the past while we are in DELAY/PROBE state. There are also places that need used/updated times to be validated while timer is not running. Reported-by: Zhang Changzhong <[email protected]> Signed-off-by: Julian Anastasov <[email protected]> Tested-by: Zhang Changzhong <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-02-06ALSA: hda/realtek: Enable mute/micmute LEDs on HP Elitebook, 645 G9Elvis Angelaccio1-0/+1
The HP Elitebook 645 G9 laptop (with motherboard model 89D2) uses the ALC236 codec and requires the alc236_fixup_hp_mute_led_micmute_vref fixup in order to enable mute/micmute LEDs. Note: the alc236_fixup_hp_gpio_led fixup, which is used by the Elitebook 640 G9, does not work with the 645 G9. [ rearranged the entry in SSID order -- tiwai ] Signed-off-by: Elvis Angelaccio <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2023-02-06cpufreq: qcom-hw: Fix cpufreq_driver->get() for non-LMH systemsDouglas Anderson1-11/+13
On a sc7180-based Chromebook, when I go to /sys/devices/system/cpu/cpu0/cpufreq I can see: cpuinfo_cur_freq:2995200 cpuinfo_max_freq:1804800 scaling_available_frequencies:300000 576000 ... 1708800 1804800 scaling_cur_freq:1804800 scaling_max_freq:1804800 As you can see the `cpuinfo_cur_freq` is bogus. It turns out that this bogus info started showing up as of commit c72cf0cb1d77 ("cpufreq: qcom-hw: Fix the frequency returned by cpufreq_driver->get()"). That commit seems to assume that everyone is on the LMH bandwagon, but sc7180 isn't. Let's go back to the old code in the case where LMH isn't used. Fixes: c72cf0cb1d77 ("cpufreq: qcom-hw: Fix the frequency returned by cpufreq_driver->get()") Signed-off-by: Douglas Anderson <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Reviewed-by: Manivannan Sadhasivam <[email protected]> [ Viresh: Fixed the 'fixes' tag ] Signed-off-by: Viresh Kumar <[email protected]>
2023-02-05Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-24/+24
Pull ELF fix from Al Viro: "One of the many equivalent build warning fixes for !CONFIG_ELF_CORE configs. Geert's is the earliest one I've been able to find" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: coredump: Move dump_emit_page() to kill unused warning
2023-02-05Linux 6.2-rc7Linus Torvalds1-1/+1
2023-02-05Merge tag 'usb-6.2-rc7' of ↵Linus Torvalds21-19/+14
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes that resolve some reported problems. These include: - gadget driver fixes - dwc3 driver fix - typec driver fix - MAINTAINERS file update. All of these have been in linux-next with no reported problems" * tag 'usb-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: ucsi: Don't attempt to resume the ports before they exist usb: gadget: udc: do not clear gadget driver.bus usb: gadget: f_uac2: Fix incorrect increment of bNumEndpoints usb: gadget: f_fs: Fix unbalanced spinlock in __ffs_ep0_queue_wait usb: dwc3: qcom: enable vbus override when in OTG dr-mode MAINTAINERS: Add myself as UVC Gadget Maintainer
2023-02-05Merge tag 'tty-6.2-rc7' of ↵Linus Torvalds3-36/+27
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are some small serial and vt fixes. These include: - 8250 driver fixes relating to dma issues - stm32 serial driver fix for threaded irqs - vc_screen bugfix for reported problems. All have been in linux-next for a while with no reported problems" * tag 'tty-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF serial: 8250_dma: Fix DMA Rx rearm race serial: 8250_dma: Fix DMA Rx completion race serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
2023-02-05Merge tag 'char-misc-6.2-rc7' of ↵Linus Torvalds19-72/+207
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are a number of small char/misc/whatever driver fixes. They include: - IIO driver fixes for some reported problems - nvmem driver fixes - fpga driver fixes - debugfs memory leak fix in the hv_balloon and irqdomain code (irqdomain change was acked by the maintainer) All have been in linux-next with no reported problems" * tag 'char-misc-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (33 commits) kernel/irq/irqdomain.c: fix memory leak with using debugfs_lookup() HV: hv_balloon: fix memory leak with using debugfs_lookup() nvmem: qcom-spmi-sdam: fix module autoloading nvmem: core: fix return value nvmem: core: fix cell removal on error nvmem: core: fix device node refcounting nvmem: core: fix registration vs use race nvmem: core: fix cleanup after dev_set_name() nvmem: core: remove nvmem_config wp_gpio nvmem: core: initialise nvmem->id early nvmem: sunxi_sid: Always use 32-bit MMIO reads nvmem: brcm_nvram: Add check for kzalloc iio: imu: fxos8700: fix MAGN sensor scale and unit iio: imu: fxos8700: remove definition FXOS8700_CTRL_ODR_MIN iio: imu: fxos8700: fix failed initialization ODR mode assignment iio: imu: fxos8700: fix incorrect ODR mode readback iio: light: cm32181: Fix PM support on system with 2 I2C resources iio: hid: fix the retval in gyro_3d_capture_sample iio: hid: fix the retval in accel_3d_capture_sample iio: imu: st_lsm6dsx: fix build when CONFIG_IIO_TRIGGERED_BUFFER=m ...
2023-02-05Merge tag 'fbdev-for-6.2-rc7' of ↵Linus Torvalds14-75/+27
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev Pull fbdev fixes from Helge Deller: - fix fbcon to prevent fonts bigger than 32x32 pixels to avoid overflows reported by syzbot - switch omapfb to use kstrtobool() - switch some fbdev drivers to use the backlight helpers * tag 'fbdev-for-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: fbcon: Check font dimension limits fbdev: omapfb: Use kstrtobool() instead of strtobool() fbdev: fbmon: fix function name in kernel-doc fbdev: atmel_lcdfb: Rework backlight status updates fbdev: riva: Use backlight helper fbdev: omapfb: panel-dsi-cm: Use backlight helper fbdev: nvidia: Use backlight helper fbdev: mx3fb: Use backlight helper fbdev: radeon: Use backlight helper fbdev: atyfb: Use backlight helper fbdev: aty128fb: Use backlight helper
2023-02-05Merge tag 'x86_urgent_for_v6.2_rc7' of ↵Linus Torvalds1-2/+24
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Borislav Petkov: - Prevent the compiler from reordering accesses to debug regs which could cause a #VC exception in SEV-ES guests at the wrong place in the NMI handling path * tag 'x86_urgent_for_v6.2_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/debug: Fix stack recursion caused by wrongly ordered DR7 accesses
2023-02-05Merge tag 'perf_urgent_for_v6.2_rc7' of ↵Linus Torvalds3-22/+57
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fix from Borislav Petkov: - Lock the proper critical section when dealing with perf event context * tag 'perf_urgent_for_v6.2_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix perf_event_pmu_context serialization
2023-02-04Merge tag 'powerpc-6.2-4' of ↵Linus Torvalds10-31/+77
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "It's a bit of a big batch for rc6, but just because I didn't send any fixes the last week or two while I was on vacation, next week should be quieter: - Fix a few objtool warnings since we recently enabled objtool. - Fix a deadlock with the hash MMU vs perf record. - Fix perf profiling of asynchronous interrupt handlers. - Revert the IMC PMU nest_init_lock to being a mutex. - Two commits fixing problems with the kexec_file FDT size estimation. - Two commits fixing problems with strict RWX vs kernels running at non-zero. - Reconnect tlb_flush() to hash__tlb_flush() Thanks to Kajol Jain, Nicholas Piggin, Sachin Sant Sathvika Vasireddy, and Sourabh Jain" * tag 'powerpc-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Reconnect tlb_flush() to hash__tlb_flush() powerpc/kexec_file: Count hot-pluggable memory in FDT estimate powerpc/64s/radix: Fix RWX mapping with relocated kernel powerpc/64s/radix: Fix crash with unaligned relocated kernel powerpc/kexec_file: Fix division by zero in extra size estimation powerpc/imc-pmu: Revert nest_init_lock to being a mutex powerpc/64: Fix perf profiling asynchronous interrupt handlers powerpc/64s: Fix local irq disable when PMIs are disabled powerpc/kvm: Fix unannotated intra-function call warning powerpc/85xx: Fix unannotated intra-function call warning
2023-02-04Merge tag 'rtc-6.2-fixes' of ↵Linus Torvalds4-24/+33
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC fixes from Alexandre Belloni: "Here are a few fixes for 6.2. The EFI one is the most important as it allows some RTCs to actually work. The other two are warnings that are worth fixing. - efi: make WAKEUP services optional - sunplus: fix format string warning" * tag 'rtc-6.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: sunplus: fix format string for printing resource dt-bindings: rtc: qcom-pm8xxx: allow 'wakeup-source' property rtc: efi: Enable SET/GET WAKEUP services as optional
2023-02-04Merge tag 'kbuild-fixes-v6.2-4' of ↵Linus Torvalds2-3/+7
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix two bugs (for building and for signing) when MODULE_SIG_KEY contains a PKCS#11 URI * tag 'kbuild-fixes-v6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: modinst: Fix build error when CONFIG_MODULE_SIG_KEY is a PKCS#11 URI certs: Fix build error when PKCS#11 URI contains semicolon
2023-02-04Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds6-98/+132
Pull kvm fixes from Paolo Bonzini: "ARM64: - Yet another fix for non-CPU accesses to the memory backing the VGICv3 subsystem - A set of fixes for the setlftest checking for the S1PTW behaviour after the fix that went in ealier in the cycle" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: selftests: aarch64: Test read-only PT memory regions KVM: selftests: aarch64: Fix check of dirty log PT write KVM: selftests: aarch64: Do not default to dirty PTE pages on all S1PTWs KVM: selftests: aarch64: Relax userfaultfd read vs. write checks KVM: arm64: Allow no running vcpu on saving vgic3 pending table KVM: arm64: Allow no running vcpu on restoring vgic3 LPI pending status KVM: arm64: Add helper vgic_write_guest_lock()
2023-02-04Merge tag 'parisc-for-6.2-rc7' of ↵Linus Torvalds3-13/+22
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture fixes from Helge Deller: - Fix PTRACE_GETREGS/PTRACE_SETREGS for 32-bit userspace on a 64-bit kernel - pdc_iodc_print() dropped chars for newline in strings - Drop constants in favour of PRIV_USER - use safer strscpy() function in pdc_stable driver * tag 'parisc-for-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Wire up PTRACE_GETREGS/PTRACE_SETREGS for compat case parisc: Replace hardcoded value with PRIV_USER constant in ptrace.c parisc: Fix return code of pdc_iodc_print() parisc: pdc_stable: use strscpy() to instead of strncpy()
2023-02-04Merge tag 'for-linus' of https://github.com/openrisc/linuxLinus Torvalds1-1/+1
Pull OpenRISC mailing list update from Stafford Horne: "The old mailing list for OpenRISC died due to some infrastructure issues and the people in charge decided not to keep it running. We have migrated this and the users over to kernel.org infrastructure. Sending this out now to avoid kernel developers getting lots of bounced mails for using the old list" * tag 'for-linus' of https://github.com/openrisc/linux: MAINTAINERS: Update OpenRISC mailing list
2023-02-04Merge tag 'kvmarm-fixes-6.2-3' of ↵Paolo Bonzini6-98/+132
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.2, take #3 - Yet another fix for non-CPU accesses to the memory backing the VGICv3 subsystem - A set of fixes for the setlftest checking for the S1PTW behaviour after the fix that went in ealier in the cycle
2023-02-04fbcon: Check font dimension limitsSamuel Thibault1-2/+5
blit_x and blit_y are u32, so fbcon currently cannot support fonts larger than 32x32. The 32x32 case also needs shifting an unsigned int, to properly set bit 31, otherwise we get "UBSAN: shift-out-of-bounds in fbcon_set_font", as reported on: http://lore.kernel.org/all/IA1PR07MB98308653E259A6F2CE94A4AFABCE9@IA1PR07MB9830.namprd07.prod.outlook.com Kernel Branch: 6.2.0-rc5-next-20230124 Kernel config: https://drive.google.com/file/d/1F-LszDAizEEH0ZX0HcSR06v5q8FPl2Uv/view?usp=sharing Reproducer: https://drive.google.com/file/d/1mP1jcLBY7vWCNM60OMf-ogw-urQRjNrm/view?usp=sharing Reported-by: Sanan Hasanov <[email protected]> Signed-off-by: Samuel Thibault <[email protected]> Fixes: 2d2699d98492 ("fbcon: font setting should check limitation of driver") Cc: [email protected] Tested-by: Miko Larsson <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Helge Deller <[email protected]>
2023-02-03Merge branch 'ionic-code-maintenance'Jakub Kicinski6-12/+195
Shannon Nelson says: ==================== ionic: code maintenance These are a few fixes for a hardware bug, a couple of sw bugs, and a little code cleanup. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-02-03ionic: missed doorbell workaroundAllen Hubbe6-4/+176
In one version of the HW there is a remote possibility that it will miss the doorbell ring. This adds a bit of protection to be sure we don't stall a queue from a missed doorbell. Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling") Signed-off-by: Allen Hubbe <[email protected]> Signed-off-by: Shannon Nelson <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-02-03ionic: clear up notifyq alloc commentaryShannon Nelson1-5/+7
Make sure the q+cq alloc for NotifyQ is clearly documented and don't bother with unnecessary local variables. Signed-off-by: Shannon Nelson <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-02-03ionic: clean interrupt before enabling queue to avoid credit raceNeel Patel1-3/+12
Clear the interrupt credits before enabling the queue rather than after to be sure that the enabled queue starts at 0 and that we don't wipe away possible credits after enabling the queue. Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling") Signed-off-by: Neel Patel <[email protected]> Signed-off-by: Shannon Nelson <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-02-03net: phy: meson-gxl: use MMD access dummy stubs for GXL, internal PHYHeiner Kallweit1-0/+2
Jerome provided the information that also the GXL internal PHY doesn't support MMD register access and EEE. MMD reads return 0xffff, what results in e.g. completely wrong ethtool --show-eee output. Therefore use the MMD dummy stubs. Fixes: d853d145ea3e ("net: phy: add an option to disable EEE advertisement") Suggested-by: Jerome Brunet <[email protected]> Signed-off-by: Heiner Kallweit <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-02-03net: macb: Perform zynqmp dynamic configuration only for SGMII interfaceRadhey Shyam Pandey1-15/+16
In zynqmp platforms where firmware supports dynamic SGMII configuration but has other non-SGMII ethernet devices, it fails them with no packets received at the RX interface. To fix this behaviour perform SGMII dynamic configuration only for the SGMII phy interface. Fixes: 32cee7818111 ("net: macb: Add zynqmp SGMII dynamic configuration support") Signed-off-by: Radhey Shyam Pandey <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Reported-by: Michal Simek <[email protected]> Tested-by: Michal Simek <[email protected]> Reviewed-by: Claudiu Beznea <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-02-03bonding: fix error checking in bond_debug_reregister()Qi Zheng1-1/+1
Since commit ff9fb72bc077 ("debugfs: return error values, not NULL") changed return value of debugfs_rename() in error cases from %NULL to %ERR_PTR(-ERROR), we should also check error values instead of NULL. Fixes: ff9fb72bc077 ("debugfs: return error values, not NULL") Signed-off-by: Qi Zheng <[email protected]> Acked-by: Jay Vosburgh <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-02-03Merge tag 'block-6.2-2023-02-03' of git://git.kernel.dk/linuxLinus Torvalds8-9/+31
Pull block fixes from Jens Axboe: "A bit bigger than I'd like at this point, but mostly a bunch of little fixes. In detail: - NVMe pull request via Christoph: - Fix a missing queue put in nvmet_fc_ls_create_association (Amit Engel) - Clear queue pointers on tag_set initialization failure (Maurizio Lombardi) - Use workqueue dedicated to authentication (Shin'ichiro Kawasaki) - Fix for an overflow in ublk (Liu) - Fix for leaking a queue reference in block cgroups (Ming) - Fix for a use-after-free in BFQ (Yu)" * tag 'block-6.2-2023-02-03' of git://git.kernel.dk/linux: blk-cgroup: don't update io stat for root cgroup nvme-auth: use workqueue dedicated to authentication nvme: clear the request_queue pointers on failure in nvme_alloc_io_tag_set nvme: clear the request_queue pointers on failure in nvme_alloc_admin_tag_set nvme-fc: fix a missing queue put in nvmet_fc_ls_create_association block: Fix the blk_mq_destroy_queue() documentation block: ublk: extending queue_size to fix overflow block, bfq: fix uaf for bfqq in bic_set_bfqq()
2023-02-03drm/amdgpu: fix memory leak in amdgpu_cs_sync_ringsBert Karwatzki1-1/+4
amdgpu_sync_get_fence deletes the returned fence from the syncobj, so the refcount of fence needs to lowered to avoid a memory leak. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2360 Reviewed-by: Alex Deucher <[email protected]> Tested-by: Mikhail Gavrilov <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Bert Karwatzki <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-02-03Merge tag 'ceph-for-6.2-rc7' of https://github.com/ceph/ceph-clientLinus Torvalds7-20/+103
Pull ceph fix from Ilya Dryomov: "A safeguard to prevent the kernel client from further damaging the filesystem after running into a case of an invalid snap trace. The root cause of this metadata corruption is still being investigated but it appears to be stemming from the MDS. As such, this is the best we can do for now" * tag 'ceph-for-6.2-rc7' of https://github.com/ceph/ceph-client: ceph: blocklist the kclient when receiving corrupted snap trace ceph: move mount state enum to super.h
2023-02-03Merge tag 'efi-fixes-for-v6.2-3' of ↵Linus Torvalds2-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI fixes from Ard Biesheuvel: - handle potential mremap() failure gracefully - don't reject EFI memory attributes table version 2 * tag 'efi-fixes-for-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi: fix potential NULL deref in efi_mem_reserve_persistent efi: Accept version 2 of memory attributes table
2023-02-03Merge tag 'riscv-for-linus-6.2-rc7' of ↵Linus Torvalds4-19/+33
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - A build fix to avoid static branches in cpu_relax(), which greatly inflates the jump tables and breaks at least CONFIG_CC_OPTIMIZE_FOR_SIZE=y. - A fix for a kernel panic when probing impossible instruction positions. - A fix to disable unwind tables, which are enabled by default for GCC-13 and result in unhandled relocations in modules. * tag 'riscv-for-linus-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: disable generation of unwind tables riscv: kprobe: Fixup kernel panic when probing an illegal position riscv: Fix build with CONFIG_CC_OPTIMIZE_FOR_SIZE=y
2023-02-03Merge tag 'drm-fixes-2023-02-03' of git://anongit.freedesktop.org/drm/drmLinus Torvalds36-122/+296
Pull drm fixes from Dave Airlie: "A few more fixes this week, a bit more spread out though. We have a bunch of nouveau regression and stabilisation fixes, along with usual amdgpu, and i915. Otherwise just some minor misc ones: dma-fence: - fix signaling bit for private fences panel: - boe-tv101wum-nl6 disable fix nouveau: - gm20b acr regression fix - tu102 scrub status fix - tu102 wait for firmware fix i915: - Fixes for potential use-after-free and double-free - GuC locking and refcount fixes - Display's reference clock value fix amdgpu: - GC11 fixes - DCN 3.1.4 fixes - NBIO 4.3 fix - DCN 3.2 fixes - Properly handle additional cases where DCN is not supported - SMU13 fixes vc4: - fix CEC adapter names ssd130x: - fix display init regression" * tag 'drm-fixes-2023-02-03' of git://anongit.freedesktop.org/drm/drm: (23 commits) drm/amd/display: Properly handle additional cases where DCN is not supported drm/amdgpu: Enable vclk dclk node for gc11.0.3 drm/amd: Fix initialization for nbio 4.3.0 drm/amdgpu: enable HDP SD for gfx 11.0.3 drm/amd/pm: drop unneeded dpm features disablement for SMU 13.0.4/11 drm/amd/display: Reset DMUB mailbox SW state after HW reset drm/amd/display: Unassign does_plane_fit_in_mall function from dcn3.2 drm/amd/display: Adjust downscaling limits for dcn314 drm/amd/display: Add missing brackets in calculation drm/amdgpu: update wave data type to 3 for gfx11 drm/panel: boe-tv101wum-nl6: Ensure DSI writes succeed during disable drm/nouveau/acr/gm20b: regression fixes drm/nouveau/fb/tu102-: fix register used to determine scrub status drm/nouveau/devinit/tu102-: wait for GFW_BOOT_PROGRESS == COMPLETED drm/i915/adlp: Fix typo for reference clock drm/i915: Fix potential bit_17 double-free drm/i915: Fix up locking around dumping requests lists drm/i915: Fix request ref counting during error capture & debugfs dump drm/i915/guc: Fix locking when searching for a hung request drm/i915: Avoid potential vm use-after-free ...
2023-02-03Merge tag 'mm-hotfixes-stable-2023-02-02-19-24-2' of ↵Linus Torvalds31-152/+430
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "25 hotfixes, mainly for MM. 13 are cc:stable" * tag 'mm-hotfixes-stable-2023-02-02-19-24-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (26 commits) mm: memcg: fix NULL pointer in mem_cgroup_track_foreign_dirty_slowpath() Kconfig.debug: fix the help description in SCHED_DEBUG mm/swapfile: add cond_resched() in get_swap_pages() mm: use stack_depot_early_init for kmemleak Squashfs: fix handling and sanity checking of xattr_ids count sh: define RUNTIME_DISCARD_EXIT highmem: round down the address passed to kunmap_flush_on_unmap() migrate: hugetlb: check for hugetlb shared PMD in node migration mm: hugetlb: proc: check for hugetlb shared PMD in /proc/PID/smaps mm/MADV_COLLAPSE: catch !none !huge !bad pmd lookups Revert "mm: kmemleak: alloc gray object for reserved region with direct map" freevxfs: Kconfig: fix spelling maple_tree: should get pivots boundary by type .mailmap: update e-mail address for Eugen Hristev mm, mremap: fix mremap() expanding for vma's with vm_ops->close() squashfs: harden sanity check in squashfs_read_xattr_id_table ia64: fix build error due to switch case label appearing next to declaration mm: multi-gen LRU: fix crash during cgroup migration Revert "mm: add nodes= arg to memory.reclaim" zsmalloc: fix a race with deferred_handles storing ...
2023-02-03efi: fix potential NULL deref in efi_mem_reserve_persistentAnton Gusev1-0/+2
When iterating on a linked list, a result of memremap is dereferenced without checking it for NULL. This patch adds a check that falls back on allocating a new page in case memremap doesn't succeed. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 18df7577adae ("efi/memreserve: deal with memreserve entries in unmapped memory") Signed-off-by: Anton Gusev <[email protected]> [ardb: return -ENOMEM instead of breaking out of the loop] Signed-off-by: Ard Biesheuvel <[email protected]>
2023-02-03ARM: dts: stihxxx-b2120: fix polarity of reset line of tsin0 portDmitry Torokhov1-1/+1
According to c8sectpfe driver code we first drive reset line low and then high to reset the port, therefore the reset line is supposed to be annotated as "active low". This will be important when we convert the driver to gpiod API. Reviewed-by: Patrice Chotard <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]> Signed-off-by: Patrice Chotard <[email protected]>
2023-02-03arm64: dts: mediatek: mt8195: Fix vdosys* compatible stringsChen-Yu Tsai1-2/+2
When vdosys1 was initially added, it was incorrectly assumed to be compatible with vdosys0, and thus both had the same mt8195-mmsys compatible attached. This has since been corrected in commit b237efd47df7 ("dt-bindings: arm: mediatek: mmsys: change compatible for MT8195") and commit 82219cfbef18 ("dt-bindings: arm: mediatek: mmsys: add vdosys1 compatible for MT8195"). The device tree needs to be fixed as well, otherwise the vdosys1 block fails to work, and causes its dependent power domain controller to not work either. Change the compatible string of vdosys1 to "mediatek,mt8195-vdosys1". While at it, also add the new "mediatek,mt8195-vdosys0" compatible to vdosys0. Fixes: 6aa5b46d1755 ("arm64: dts: mt8195: Add vdosys and vppsys clock nodes") Signed-off-by: Chen-Yu Tsai <[email protected]> Tested-by: AngeloGioacchino Del Regno <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Acked-by: Matthias Brugger <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2023-02-03Merge tag 'v6.2-rockchip-dtsfixes1' of ↵Arnd Bergmann8-9/+26
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes Fixes to adapt to correct binding behaviour and fixes for devices on some boards Most notably may be the adaption of lower thermal limits for the pinephone pro, where the original hiher ones could result in (possibly permanent) display issues. * tag 'v6.2-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: align rk3399 DMC OPP table with bindings arm64: dts: rockchip: set sdmmc0 speed to sd-uhs-sdr50 on rock-3a arm64: dts: rockchip: fix probe of analog sound card on rock-3a arm64: dts: rockchip: add missing #interrupt-cells to rk356x pcie2x1 arm64: dts: rockchip: fix input enable pinconf on rk3399 ARM: dts: rockchip: add power-domains property to dp node on rk3288 arm64: dts: rockchip: add io domain setting to rk3566-box-demo arm64: dts: rockchip: remove unsupported property from sdmmc2 for rock-3a arm64: dts: rockchip: drop unused LED mode property from rk3328-roc-cc arm64: dts: rockchip: reduce thermal limits on rk3399-pinephone-pro arm64: dts: rockchip: use correct reset names for rk3399 crypto nodes Link: https://lore.kernel.org/r/3514663.mvXUDI8C0e@phil Signed-off-by: Arnd Bergmann <[email protected]>
2023-02-03net: phylink: move phy_device_free() to correctly release phy deviceClément Léger1-3/+2
After calling fwnode_phy_find_device(), the phy device refcount is incremented. Then, when the phy device is attached to a netdev with phy_attach_direct(), the refcount is also incremented but only decremented in the caller if phy_attach_direct() fails. Move phy_device_free() before the "if" to always release it correctly. Indeed, either phy_attach_direct() failed and we don't want to keep a reference to the phydev or it succeeded and a reference has been taken internally. Fixes: 25396f680dd6 ("net: phylink: introduce phylink_fwnode_phy_connect()") Signed-off-by: Clément Léger <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-02-03kernel/irq/irqdomain.c: fix memory leak with using debugfs_lookup()Greg Kroah-Hartman1-1/+1
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. Cc: Thomas Gleixner <[email protected]> Cc: stable <[email protected]> Reviewed-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-02-03HV: hv_balloon: fix memory leak with using debugfs_lookup()Greg Kroah-Hartman1-1/+1
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. Cc: "K. Y. Srinivasan" <[email protected]> Cc: Haiyang Zhang <[email protected]> Cc: Wei Liu <[email protected]> Cc: Dexuan Cui <[email protected]> Fixes: d180e0a1be6c ("Drivers: hv: Create debugfs file with hyper-v balloon usage information") Cc: stable <[email protected]> Reviewed-by: Michael Kelley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-02-02riscv: stacktrace: Fix missing the first frameLiu Shixin1-1/+2
When running kfence_test, I found some testcases failed like this: # test_out_of_bounds_read: EXPECTATION FAILED at mm/kfence/kfence_test.c:346 Expected report_matches(&expect) to be true, but is false not ok 1 - test_out_of_bounds_read The corresponding call-trace is: BUG: KFENCE: out-of-bounds read in kunit_try_run_case+0x38/0x84 Out-of-bounds read at 0x(____ptrval____) (32B right of kfence-#10): kunit_try_run_case+0x38/0x84 kunit_generic_run_threadfn_adapter+0x12/0x1e kthread+0xc8/0xde ret_from_exception+0x0/0xc The kfence_test using the first frame of call trace to check whether the testcase is succeed or not. Commit 6a00ef449370 ("riscv: eliminate unreliable __builtin_frame_address(1)") skip first frame for all case, which results the kfence_test failed. Indeed, we only need to skip the first frame for case (task==NULL || task==current). With this patch, the call-trace will be: BUG: KFENCE: out-of-bounds read in test_out_of_bounds_read+0x88/0x19e Out-of-bounds read at 0x(____ptrval____) (1B left of kfence-#7): test_out_of_bounds_read+0x88/0x19e kunit_try_run_case+0x38/0x84 kunit_generic_run_threadfn_adapter+0x12/0x1e kthread+0xc8/0xde ret_from_exception+0x0/0xc Fixes: 6a00ef449370 ("riscv: eliminate unreliable __builtin_frame_address(1)") Signed-off-by: Liu Shixin <[email protected]> Tested-by: Samuel Holland <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Palmer Dabbelt <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.