diff options
Diffstat (limited to 'tools/perf/pmu-events/arch/x86/ivytown/frontend.json')
| -rw-r--r-- | tools/perf/pmu-events/arch/x86/ivytown/frontend.json | 60 |
1 files changed, 0 insertions, 60 deletions
diff --git a/tools/perf/pmu-events/arch/x86/ivytown/frontend.json b/tools/perf/pmu-events/arch/x86/ivytown/frontend.json index 0a295c4e093d..4ee100024ca9 100644 --- a/tools/perf/pmu-events/arch/x86/ivytown/frontend.json +++ b/tools/perf/pmu-events/arch/x86/ivytown/frontend.json @@ -1,8 +1,6 @@ [ { "BriefDescription": "Counts the total number when the front end is resteered, mainly when the BPU cannot provide a correct prediction and this is corrected by other branch handling mechanisms at the front end.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xE6", "EventName": "BACLEARS.ANY", "PublicDescription": "Number of front end re-steers due to BPU misprediction.", @@ -11,8 +9,6 @@ }, { "BriefDescription": "Decode Stream Buffer (DSB)-to-MITE switches", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xAB", "EventName": "DSB2MITE_SWITCHES.COUNT", "PublicDescription": "Number of DSB to MITE switches.", @@ -21,8 +17,6 @@ }, { "BriefDescription": "Decode Stream Buffer (DSB)-to-MITE switch true penalty cycles", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xAB", "EventName": "DSB2MITE_SWITCHES.PENALTY_CYCLES", "PublicDescription": "Cycles DSB to MITE switches caused delay.", @@ -31,8 +25,6 @@ }, { "BriefDescription": "Cycles when Decode Stream Buffer (DSB) fill encounter more than 3 Decode Stream Buffer (DSB) lines", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xAC", "EventName": "DSB_FILL.EXCEED_DSB_LINES", "PublicDescription": "DSB Fill encountered > 3 DSB lines.", @@ -41,8 +33,6 @@ }, { "BriefDescription": "Number of Instruction Cache, Streaming Buffer and Victim Cache Reads. both cacheable and noncacheable, including UC fetches", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x80", "EventName": "ICACHE.HIT", "PublicDescription": "Number of Instruction Cache, Streaming Buffer and Victim Cache Reads. both cacheable and noncacheable, including UC fetches.", @@ -51,8 +41,6 @@ }, { "BriefDescription": "Cycles where a code-fetch stalled due to L1 instruction-cache miss or an iTLB miss", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x80", "EventName": "ICACHE.IFETCH_STALL", "PublicDescription": "Cycles where a code-fetch stalled due to L1 instruction-cache miss or an iTLB miss.", @@ -61,8 +49,6 @@ }, { "BriefDescription": "Instruction cache, streaming buffer and victim cache misses", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x80", "EventName": "ICACHE.MISSES", "PublicDescription": "Number of Instruction Cache, Streaming Buffer and Victim Cache Misses. Includes UC accesses.", @@ -71,8 +57,6 @@ }, { "BriefDescription": "Cycles Decode Stream Buffer (DSB) is delivering 4 Uops", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "4", "EventCode": "0x79", "EventName": "IDQ.ALL_DSB_CYCLES_4_UOPS", @@ -82,8 +66,6 @@ }, { "BriefDescription": "Cycles Decode Stream Buffer (DSB) is delivering any Uop", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EventCode": "0x79", "EventName": "IDQ.ALL_DSB_CYCLES_ANY_UOPS", @@ -93,8 +75,6 @@ }, { "BriefDescription": "Cycles MITE is delivering 4 Uops", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "4", "EventCode": "0x79", "EventName": "IDQ.ALL_MITE_CYCLES_4_UOPS", @@ -104,8 +84,6 @@ }, { "BriefDescription": "Cycles MITE is delivering any Uop", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EventCode": "0x79", "EventName": "IDQ.ALL_MITE_CYCLES_ANY_UOPS", @@ -115,8 +93,6 @@ }, { "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) from Decode Stream Buffer (DSB) path", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EventCode": "0x79", "EventName": "IDQ.DSB_CYCLES", @@ -126,8 +102,6 @@ }, { "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x79", "EventName": "IDQ.DSB_UOPS", "PublicDescription": "Increment each cycle. # of uops delivered to IDQ from DSB path. Set Cmask = 1 to count cycles.", @@ -136,8 +110,6 @@ }, { "BriefDescription": "Instruction Decode Queue (IDQ) empty cycles", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0x79", "EventName": "IDQ.EMPTY", "PublicDescription": "Counts cycles the IDQ is empty.", @@ -146,8 +118,6 @@ }, { "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from MITE path", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x79", "EventName": "IDQ.MITE_ALL_UOPS", "PublicDescription": "Number of uops delivered to IDQ from any path.", @@ -156,8 +126,6 @@ }, { "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) from MITE path", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EventCode": "0x79", "EventName": "IDQ.MITE_CYCLES", @@ -167,8 +135,6 @@ }, { "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from MITE path", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x79", "EventName": "IDQ.MITE_UOPS", "PublicDescription": "Increment each cycle # of uops delivered to IDQ from MITE path. Set Cmask = 1 to count cycles.", @@ -177,8 +143,6 @@ }, { "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequencer (MS) is busy", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EventCode": "0x79", "EventName": "IDQ.MS_CYCLES", @@ -188,8 +152,6 @@ }, { "BriefDescription": "Cycles when uops initiated by Decode Stream Buffer (DSB) are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequencer (MS) is busy", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EventCode": "0x79", "EventName": "IDQ.MS_DSB_CYCLES", @@ -199,8 +161,6 @@ }, { "BriefDescription": "Deliveries to Instruction Decode Queue (IDQ) initiated by Decode Stream Buffer (DSB) while Microcode Sequencer (MS) is busy", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EdgeDetect": "1", "EventCode": "0x79", @@ -211,8 +171,6 @@ }, { "BriefDescription": "Uops initiated by Decode Stream Buffer (DSB) that are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequencer (MS) is busy", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x79", "EventName": "IDQ.MS_DSB_UOPS", "PublicDescription": "Increment each cycle # of uops delivered to IDQ when MS_busy by DSB. Set Cmask = 1 to count cycles. Add Edge=1 to count # of delivery.", @@ -221,8 +179,6 @@ }, { "BriefDescription": "Uops initiated by MITE and delivered to Instruction Decode Queue (IDQ) while Microcode Sequencer (MS) is busy", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x79", "EventName": "IDQ.MS_MITE_UOPS", "PublicDescription": "Increment each cycle # of uops delivered to IDQ when MS_busy by MITE. Set Cmask = 1 to count cycles.", @@ -231,8 +187,6 @@ }, { "BriefDescription": "Number of switches from DSB (Decode Stream Buffer) or MITE (legacy decode pipeline) to the Microcode Sequencer", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EdgeDetect": "1", "EventCode": "0x79", @@ -243,8 +197,6 @@ }, { "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) while Microcode Sequencer (MS) is busy", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x79", "EventName": "IDQ.MS_UOPS", "PublicDescription": "Increment each cycle # of uops delivered to IDQ from MS by either DSB or MITE. Set Cmask = 1 to count cycles.", @@ -253,8 +205,6 @@ }, { "BriefDescription": "Uops not delivered to Resource Allocation Table (RAT) per thread when backend of the machine is not stalled", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0x9C", "EventName": "IDQ_UOPS_NOT_DELIVERED.CORE", "PublicDescription": "Count issue pipeline slots where no uop was delivered from the front end to the back end when there is no back-end stall.", @@ -263,8 +213,6 @@ }, { "BriefDescription": "Cycles per thread when 4 or more uops are not delivered to Resource Allocation Table (RAT) when backend of the machine is not stalled.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "CounterMask": "4", "EventCode": "0x9C", "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE", @@ -273,8 +221,6 @@ }, { "BriefDescription": "Counts cycles FE delivered 4 uops or Resource Allocation Table (RAT) was stalling FE.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "CounterMask": "1", "EventCode": "0x9C", "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_FE_WAS_OK", @@ -284,8 +230,6 @@ }, { "BriefDescription": "Cycles per thread when 3 or more uops are not delivered to Resource Allocation Table (RAT) when backend of the machine is not stalled.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "CounterMask": "3", "EventCode": "0x9C", "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_LE_1_UOP_DELIV.CORE", @@ -294,8 +238,6 @@ }, { "BriefDescription": "Cycles with less than 2 uops delivered by the front end.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "CounterMask": "2", "EventCode": "0x9C", "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_LE_2_UOP_DELIV.CORE", @@ -304,8 +246,6 @@ }, { "BriefDescription": "Cycles with less than 3 uops delivered by the front end.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "CounterMask": "1", "EventCode": "0x9C", "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_LE_3_UOP_DELIV.CORE", |