diff options
Diffstat (limited to 'sound')
-rw-r--r-- | sound/soc/codecs/wsa881x.c | 44 | ||||
-rw-r--r-- | sound/soc/qcom/Kconfig | 2 | ||||
-rw-r--r-- | sound/soc/qcom/sdm845.c | 67 |
3 files changed, 69 insertions, 44 deletions
diff --git a/sound/soc/codecs/wsa881x.c b/sound/soc/codecs/wsa881x.c index b59f1d0e7f84..3d525297eac9 100644 --- a/sound/soc/codecs/wsa881x.c +++ b/sound/soc/codecs/wsa881x.c @@ -676,7 +676,6 @@ struct wsa881x_priv { int active_ports; bool port_prepared[WSA881X_MAX_SWR_PORTS]; bool port_enable[WSA881X_MAX_SWR_PORTS]; - bool stream_prepared; }; static void wsa881x_init(struct wsa881x_priv *wsa881x) @@ -954,41 +953,6 @@ static const struct snd_soc_dapm_widget wsa881x_dapm_widgets[] = { SND_SOC_DAPM_OUTPUT("SPKR"), }; -static int wsa881x_prepare(struct snd_pcm_substream *substream, - struct snd_soc_dai *dai) -{ - struct wsa881x_priv *wsa881x = dev_get_drvdata(dai->dev); - int ret; - - if (wsa881x->stream_prepared) { - sdw_disable_stream(wsa881x->sruntime); - sdw_deprepare_stream(wsa881x->sruntime); - wsa881x->stream_prepared = false; - } - - - ret = sdw_prepare_stream(wsa881x->sruntime); - if (ret) - return ret; - - /** - * NOTE: there is a strict hw requirement about the ordering of port - * enables and actual PA enable. PA enable should only happen after - * soundwire ports are enabled if not DC on the line is accumulated - * resulting in Click/Pop Noise - * PA enable/mute are handled as part of DAPM and digital mute. - */ - - ret = sdw_enable_stream(wsa881x->sruntime); - if (ret) { - sdw_deprepare_stream(wsa881x->sruntime); - return ret; - } - wsa881x->stream_prepared = true; - - return ret; -} - static int wsa881x_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) @@ -1016,12 +980,7 @@ static int wsa881x_hw_free(struct snd_pcm_substream *substream, { struct wsa881x_priv *wsa881x = dev_get_drvdata(dai->dev); - if (wsa881x->stream_prepared) { - sdw_disable_stream(wsa881x->sruntime); - sdw_deprepare_stream(wsa881x->sruntime); - sdw_stream_remove_slave(wsa881x->slave, wsa881x->sruntime); - wsa881x->stream_prepared = false; - } + sdw_stream_remove_slave(wsa881x->slave, wsa881x->sruntime); return 0; } @@ -1052,7 +1011,6 @@ static int wsa881x_digital_mute(struct snd_soc_dai *dai, int mute, int stream) static struct snd_soc_dai_ops wsa881x_dai_ops = { .hw_params = wsa881x_hw_params, - .prepare = wsa881x_prepare, .hw_free = wsa881x_hw_free, .mute_stream = wsa881x_digital_mute, .set_sdw_stream = wsa881x_set_sdw_stream, diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig index 6530d2462a9e..f51b28d1b94d 100644 --- a/sound/soc/qcom/Kconfig +++ b/sound/soc/qcom/Kconfig @@ -99,7 +99,7 @@ config SND_SOC_MSM8996 config SND_SOC_SDM845 tristate "SoC Machine driver for SDM845 boards" - depends on QCOM_APR && CROS_EC && I2C + depends on QCOM_APR && CROS_EC && I2C && SOUNDWIRE select SND_SOC_QDSP6 select SND_SOC_QCOM_COMMON select SND_SOC_RT5663 diff --git a/sound/soc/qcom/sdm845.c b/sound/soc/qcom/sdm845.c index 3ac02204a706..67a55edf755f 100644 --- a/sound/soc/qcom/sdm845.c +++ b/sound/soc/qcom/sdm845.c @@ -11,6 +11,7 @@ #include <sound/pcm_params.h> #include <sound/jack.h> #include <sound/soc.h> +#include <linux/soundwire/sdw.h> #include <uapi/linux/input-event-codes.h> #include "common.h" #include "qdsp6/q6afe.h" @@ -31,10 +32,12 @@ struct sdm845_snd_data { struct snd_soc_jack jack; bool jack_setup; + bool stream_prepared[SLIM_MAX_RX_PORTS]; struct snd_soc_card *card; uint32_t pri_mi2s_clk_count; uint32_t sec_mi2s_clk_count; uint32_t quat_tdm_clk_count; + struct sdw_stream_runtime *sruntime[SLIM_MAX_RX_PORTS]; }; static unsigned int tdm_slot_offset[8] = {0, 4, 8, 12, 16, 20, 24, 28}; @@ -45,11 +48,18 @@ static int sdm845_slim_snd_hw_params(struct snd_pcm_substream *substream, struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_dai *cpu_dai = rtd->cpu_dai; struct snd_soc_dai *codec_dai; + struct sdm845_snd_data *pdata = snd_soc_card_get_drvdata(rtd->card); u32 rx_ch[SLIM_MAX_RX_PORTS], tx_ch[SLIM_MAX_TX_PORTS]; + struct sdw_stream_runtime *sruntime; u32 rx_ch_cnt = 0, tx_ch_cnt = 0; int ret = 0, i; for_each_rtd_codec_dais(rtd, i, codec_dai) { + sruntime = snd_soc_dai_get_sdw_stream(codec_dai, + substream->stream); + if (sruntime != ERR_PTR(-ENOTSUPP)) + pdata->sruntime[cpu_dai->id] = sruntime; + ret = snd_soc_dai_get_channel_map(codec_dai, &tx_ch_cnt, tx_ch, &rx_ch_cnt, rx_ch); @@ -425,8 +435,65 @@ static void sdm845_snd_shutdown(struct snd_pcm_substream *substream) } } +static int sdm845_snd_prepare(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct sdm845_snd_data *data = snd_soc_card_get_drvdata(rtd->card); + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id]; + int ret; + + if (!sruntime) + return 0; + + if (data->stream_prepared[cpu_dai->id]) { + sdw_disable_stream(sruntime); + sdw_deprepare_stream(sruntime); + data->stream_prepared[cpu_dai->id] = false; + } + + ret = sdw_prepare_stream(sruntime); + if (ret) + return ret; + + /** + * NOTE: there is a strict hw requirement about the ordering of port + * enables and actual WSA881x PA enable. PA enable should only happen + * after soundwire ports are enabled if not DC on the line is + * accumulated resulting in Click/Pop Noise + * PA enable/mute are handled as part of codec DAPM and digital mute. + */ + + ret = sdw_enable_stream(sruntime); + if (ret) { + sdw_deprepare_stream(sruntime); + return ret; + } + data->stream_prepared[cpu_dai->id] = true; + + return ret; +} + +static int sdm845_snd_hw_free(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct sdm845_snd_data *data = snd_soc_card_get_drvdata(rtd->card); + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id]; + + if (sruntime && data->stream_prepared[cpu_dai->id]) { + sdw_disable_stream(sruntime); + sdw_deprepare_stream(sruntime); + data->stream_prepared[cpu_dai->id] = false; + } + + return 0; +} + static const struct snd_soc_ops sdm845_be_ops = { .hw_params = sdm845_snd_hw_params, + .hw_free = sdm845_snd_hw_free, + .prepare = sdm845_snd_prepare, .startup = sdm845_snd_startup, .shutdown = sdm845_snd_shutdown, }; |