aboutsummaryrefslogtreecommitdiff
path: root/include/linux
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux')
-rw-r--r--include/linux/ethtool.h33
-rw-r--r--include/linux/mlx5/port.h12
-rw-r--r--include/linux/sfp.h10
3 files changed, 54 insertions, 1 deletions
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index 4290e2fa3117..9f6f323af59a 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -81,6 +81,7 @@ enum {
#define ETH_RSS_HASH_NO_CHANGE 0
struct net_device;
+struct netlink_ext_ack;
/* Some generic methods drivers may use in their ethtool_ops */
u32 ethtool_op_get_link(struct net_device *dev);
@@ -262,6 +263,31 @@ struct ethtool_pause_stats {
u64 rx_pause_frames;
};
+#define ETH_MODULE_EEPROM_PAGE_LEN 128
+#define ETH_MODULE_MAX_I2C_ADDRESS 0x7f
+
+/**
+ * struct ethtool_module_eeprom - EEPROM dump from specified page
+ * @offset: Offset within the specified EEPROM page to begin read, in bytes.
+ * @length: Number of bytes to read.
+ * @page: Page number to read from.
+ * @bank: Page bank number to read from, if applicable by EEPROM spec.
+ * @i2c_address: I2C address of a page. Value less than 0x7f expected. Most
+ * EEPROMs use 0x50 or 0x51.
+ * @data: Pointer to buffer with EEPROM data of @length size.
+ *
+ * This can be used to manage pages during EEPROM dump in ethtool and pass
+ * required information to the driver.
+ */
+struct ethtool_module_eeprom {
+ __u32 offset;
+ __u32 length;
+ __u8 page;
+ __u8 bank;
+ __u8 i2c_address;
+ __u8 *data;
+};
+
/**
* struct ethtool_ops - optional netdev operations
* @cap_link_lanes_supported: indicates if the driver supports lanes
@@ -414,6 +440,9 @@ struct ethtool_pause_stats {
* cannot use the standard PHY library helpers.
* @get_phy_tunable: Read the value of a PHY tunable.
* @set_phy_tunable: Set the value of a PHY tunable.
+ * @get_module_eeprom_by_page: Get a region of plug-in module EEPROM data from
+ * specified page. Returns a negative error code or the amount of bytes
+ * read.
*
* All operations are optional (i.e. the function pointer may be set
* to %NULL) and callers must take this into account. Callers must
@@ -519,6 +548,9 @@ struct ethtool_ops {
const struct ethtool_tunable *, void *);
int (*set_phy_tunable)(struct net_device *,
const struct ethtool_tunable *, const void *);
+ int (*get_module_eeprom_by_page)(struct net_device *dev,
+ const struct ethtool_module_eeprom *page,
+ struct netlink_ext_ack *extack);
};
int ethtool_check_ops(const struct ethtool_ops *ops);
@@ -542,7 +574,6 @@ int ethtool_virtdev_set_link_ksettings(struct net_device *dev,
const struct ethtool_link_ksettings *cmd,
u32 *dev_speed, u8 *dev_duplex);
-struct netlink_ext_ack;
struct phy_device;
struct phy_tdr_config;
diff --git a/include/linux/mlx5/port.h b/include/linux/mlx5/port.h
index 23edd2db4803..77ea4f9c5265 100644
--- a/include/linux/mlx5/port.h
+++ b/include/linux/mlx5/port.h
@@ -45,6 +45,7 @@ enum mlx5_module_id {
MLX5_MODULE_ID_QSFP = 0xC,
MLX5_MODULE_ID_QSFP_PLUS = 0xD,
MLX5_MODULE_ID_QSFP28 = 0x11,
+ MLX5_MODULE_ID_DSFP = 0x1B,
};
enum mlx5_an_status {
@@ -62,6 +63,15 @@ enum mlx5_an_status {
#define MLX5_EEPROM_PAGE_LENGTH 256
#define MLX5_EEPROM_HIGH_PAGE_LENGTH 128
+struct mlx5_module_eeprom_query_params {
+ u16 size;
+ u16 offset;
+ u16 i2c_address;
+ u32 page;
+ u32 bank;
+ u32 module_number;
+};
+
enum mlx5e_link_mode {
MLX5E_1000BASE_CX_SGMII = 0,
MLX5E_1000BASE_KX = 1,
@@ -200,6 +210,8 @@ void mlx5_query_port_fcs(struct mlx5_core_dev *mdev, bool *supported,
bool *enabled);
int mlx5_query_module_eeprom(struct mlx5_core_dev *dev,
u16 offset, u16 size, u8 *data);
+int mlx5_query_module_eeprom_by_page(struct mlx5_core_dev *dev,
+ struct mlx5_module_eeprom_query_params *params, u8 *data);
int mlx5_query_port_dcbx_param(struct mlx5_core_dev *mdev, u32 *out);
int mlx5_set_port_dcbx_param(struct mlx5_core_dev *mdev, u32 *in);
diff --git a/include/linux/sfp.h b/include/linux/sfp.h
index 38893e4dd0f0..302094b855fb 100644
--- a/include/linux/sfp.h
+++ b/include/linux/sfp.h
@@ -542,6 +542,9 @@ phy_interface_t sfp_select_interface(struct sfp_bus *bus,
int sfp_get_module_info(struct sfp_bus *bus, struct ethtool_modinfo *modinfo);
int sfp_get_module_eeprom(struct sfp_bus *bus, struct ethtool_eeprom *ee,
u8 *data);
+int sfp_get_module_eeprom_by_page(struct sfp_bus *bus,
+ const struct ethtool_module_eeprom *page,
+ struct netlink_ext_ack *extack);
void sfp_upstream_start(struct sfp_bus *bus);
void sfp_upstream_stop(struct sfp_bus *bus);
void sfp_bus_put(struct sfp_bus *bus);
@@ -587,6 +590,13 @@ static inline int sfp_get_module_eeprom(struct sfp_bus *bus,
return -EOPNOTSUPP;
}
+static inline int sfp_get_module_eeprom_by_page(struct sfp_bus *bus,
+ const struct ethtool_module_eeprom *page,
+ struct netlink_ext_ack *extack)
+{
+ return -EOPNOTSUPP;
+}
+
static inline void sfp_upstream_start(struct sfp_bus *bus)
{
}