diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/i2c/busses/Kconfig | 61 |
1 files changed, 33 insertions, 28 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index b2840c5ebf24..e6777e7dfecc 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -367,7 +367,8 @@ comment "I2C system bus drivers (mostly embedded / system-on-chip)" config I2C_ALTERA tristate "Altera Soft IP I2C" - depends on (ARCH_SOCFPGA || NIOS2) && OF + depends on ARCH_SOCFPGA || NIOS2 || COMPILE_TEST + depends on OF help If you say yes to this option, support will be included for the Altera Soft IP I2C interfaces on SoCFPGA and Nios2 architectures. @@ -387,7 +388,7 @@ config I2C_ASPEED config I2C_AT91 tristate "Atmel AT91 I2C Two-Wire interface (TWI)" - depends on ARCH_AT91 + depends on ARCH_AT91 || COMPILE_TEST help This supports the use of the I2C interface on Atmel AT91 processors. @@ -440,7 +441,8 @@ config I2C_AXXIA config I2C_BCM2835 tristate "Broadcom BCM2835 I2C controller" - depends on ARCH_BCM2835 || ARCH_BRCMSTB + depends on ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST + depends on COMMON_CLK help If you say yes to this option, support will be included for the BCM2835 I2C controller. @@ -463,8 +465,8 @@ config I2C_BCM_IPROC config I2C_BCM_KONA tristate "BCM Kona I2C adapter" - depends on ARCH_BCM_MOBILE - default y + depends on ARCH_BCM_MOBILE || COMPILE_TEST + default y if ARCH_BCM_MOBILE help If you say yes to this option, support will be included for the I2C interface on the Broadcom Kona family of processors. @@ -511,7 +513,7 @@ config I2C_CPM config I2C_DAVINCI tristate "DaVinci I2C driver" - depends on ARCH_DAVINCI || ARCH_KEYSTONE + depends on ARCH_DAVINCI || ARCH_KEYSTONE || COMPILE_TEST help Support for TI DaVinci I2C controller driver. @@ -572,7 +574,7 @@ config I2C_DESIGNWARE_BAYTRAIL config I2C_DIGICOLOR tristate "Conexant Digicolor I2C driver" - depends on ARCH_DIGICOLOR + depends on ARCH_DIGICOLOR || COMPILE_TEST help Support for Conexant Digicolor SoCs (CX92755) I2C controller driver. @@ -611,8 +613,9 @@ config I2C_EMEV2 config I2C_EXYNOS5 tristate "Exynos5 high-speed I2C driver" - depends on ARCH_EXYNOS && OF - default y + depends on OF + depends on ARCH_EXYNOS || COMPILE_TEST + default y if ARCH_EXYNOS help High-speed I2C controller on Exynos5 based Samsung SoCs. @@ -634,7 +637,7 @@ config I2C_GPIO_FAULT_INJECTOR config I2C_HIGHLANDER tristate "Highlander FPGA SMBus interface" - depends on SH_HIGHLANDER + depends on SH_HIGHLANDER || COMPILE_TEST help If you say yes to this option, support will be included for the SMBus interface located in the FPGA on various Highlander @@ -686,7 +689,7 @@ config I2C_IMX_LPI2C config I2C_IOP3XX tristate "Intel IOPx3xx and IXP4xx on-chip I2C interface" - depends on ARCH_IOP32X || ARCH_IXP4XX + depends on ARCH_IOP32X || ARCH_IXP4XX || COMPILE_TEST help Say Y here if you want to use the IIC bus controller on the Intel IOPx3xx I/O Processors or IXP4xx Network Processors. @@ -726,6 +729,7 @@ config I2C_LPC2K config I2C_MESON tristate "Amlogic Meson I2C controller" depends on ARCH_MESON || COMPILE_TEST + depends on COMMON_CLK help If you say yes to this option, support will be included for the I2C interface on the Amlogic Meson family of SoCs. @@ -759,7 +763,7 @@ config I2C_MT7621 config I2C_MV64XXX tristate "Marvell mv64xxx I2C Controller" - depends on MV64X60 || PLAT_ORION || ARCH_SUNXI || ARCH_MVEBU + depends on MV64X60 || PLAT_ORION || ARCH_SUNXI || ARCH_MVEBU || COMPILE_TEST help If you say yes to this option, support will be included for the built-in I2C interface on the Marvell 64xxx line of host bridges. @@ -770,7 +774,7 @@ config I2C_MV64XXX config I2C_MXS tristate "Freescale i.MX28 I2C interface" - depends on SOC_IMX28 + depends on SOC_IMX28 || COMPILE_TEST select STMP_DEVICE help Say Y here if you want to use the I2C bus controller on @@ -799,7 +803,7 @@ config I2C_OCORES config I2C_OMAP tristate "OMAP I2C adapter" - depends on ARCH_OMAP || ARCH_K3 + depends on ARCH_OMAP || ARCH_K3 || COMPILE_TEST default y if MACH_OMAP_H3 || MACH_OMAP_OSK help If you say yes to this option, support will be included for the @@ -833,7 +837,7 @@ config I2C_PCA_PLATFORM config I2C_PMCMSP tristate "PMC MSP I2C TWI Controller" - depends on PMC_MSP + depends on PMC_MSP || COMPILE_TEST help This driver supports the PMC TWI controller on MSP devices. @@ -842,7 +846,7 @@ config I2C_PMCMSP config I2C_PNX tristate "I2C bus support for Philips PNX and NXP LPC targets" - depends on ARCH_LPC32XX + depends on ARCH_LPC32XX || COMPILE_TEST help This driver supports the Philips IP3204 I2C IP block master and/or slave controller @@ -863,7 +867,7 @@ config I2C_PUV3 config I2C_PXA tristate "Intel PXA2XX I2C adapter" - depends on ARCH_PXA || ARCH_MMP || ARCH_MVEBU || (X86_32 && PCI && OF) + depends on ARCH_PXA || ARCH_MMP || ARCH_MVEBU || (X86_32 && PCI && OF) || COMPILE_TEST help If you have devices in the PXA I2C bus, say yes to this option. This driver can also be built as a module. If so, the module @@ -933,7 +937,7 @@ config HAVE_S3C2410_I2C config I2C_S3C2410 tristate "S3C2410 I2C Driver" - depends on HAVE_S3C2410_I2C + depends on HAVE_S3C2410_I2C || COMPILE_TEST help Say Y here to include support for I2C controller in the Samsung SoCs. @@ -971,7 +975,7 @@ config I2C_SIMTEC config I2C_SIRF tristate "CSR SiRFprimaII I2C interface" - depends on ARCH_SIRF + depends on ARCH_SIRF || COMPILE_TEST help If you say yes to this option, support will be included for the CSR SiRFprimaII I2C interface. @@ -981,14 +985,14 @@ config I2C_SIRF config I2C_SPRD tristate "Spreadtrum I2C interface" - depends on I2C=y && ARCH_SPRD + depends on I2C=y && (ARCH_SPRD || COMPILE_TEST) help If you say yes to this option, support will be included for the Spreadtrum I2C interface. config I2C_ST tristate "STMicroelectronics SSC I2C support" - depends on ARCH_STI + depends on ARCH_STI || COMPILE_TEST help Enable this option to add support for STMicroelectronics SoCs hardware SSC (Synchronous Serial Controller) as an I2C controller. @@ -1019,7 +1023,7 @@ config I2C_STM32F7 config I2C_STU300 tristate "ST Microelectronics DDC I2C interface" - depends on MACH_U300 + depends on MACH_U300 || COMPILE_TEST default y if MACH_U300 help If you say yes to this option, support will be included for the @@ -1055,15 +1059,16 @@ config I2C_SYNQUACER config I2C_TEGRA tristate "NVIDIA Tegra internal I2C controller" - depends on ARCH_TEGRA + depends on ARCH_TEGRA || (COMPILE_TEST && (ARC || ARM || ARM64 || M68K || RISCV || SUPERH || SPARC)) + # COMPILE_TEST needs architectures with readsX()/writesX() primitives help If you say yes to this option, support will be included for the I2C controller embedded in NVIDIA Tegra SOCs config I2C_TEGRA_BPMP tristate "NVIDIA Tegra BPMP I2C controller" - depends on TEGRA_BPMP - default y + depends on TEGRA_BPMP || COMPILE_TEST + default y if TEGRA_BPMP help If you say yes to this option, support will be included for the I2C controller embedded in NVIDIA Tegra SoCs accessed via the BPMP. @@ -1101,7 +1106,7 @@ config I2C_VERSATILE config I2C_WMT tristate "Wondermedia WM8xxx SoC I2C bus support" - depends on ARCH_VT8500 + depends on ARCH_VT8500 || COMPILE_TEST help Say yes if you want to support the I2C bus on Wondermedia 8xxx-series SoCs. @@ -1142,7 +1147,7 @@ config I2C_XILINX config I2C_XLR tristate "Netlogic XLR and Sigma Designs I2C support" - depends on CPU_XLR || ARCH_TANGO + depends on CPU_XLR || ARCH_TANGO || COMPILE_TEST help This driver enables support for the on-chip I2C interface of the Netlogic XLR/XLS MIPS processors and Sigma Designs SOCs. @@ -1294,7 +1299,7 @@ config I2C_ICY config I2C_MLXCPLD tristate "Mellanox I2C driver" - depends on X86_64 + depends on X86_64 || COMPILE_TEST help This exposes the Mellanox platform I2C busses to the linux I2C layer for X86 based systems. |