diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/sge.c | 14 | ||||
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/t4_values.h | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c | 56 | ||||
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4vf/sge.c | 55 | ||||
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c | 55 |
6 files changed, 85 insertions, 97 deletions
diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c index b4eb4680a27c..deca4a2956cc 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c @@ -2226,7 +2226,7 @@ static int process_responses(struct sge_rspq *q, int budget) budget_left--; } - if (q->offset >= 0 && rxq->fl.size - rxq->fl.avail >= 16) + if (q->offset >= 0 && fl_cap(&rxq->fl) - rxq->fl.avail >= 16) __refill_fl(q->adap, &rxq->fl); return budget - budget_left; } @@ -2611,8 +2611,18 @@ int t4_sge_alloc_rxq(struct adapter *adap, struct sge_rspq *iq, bool fwevtq, htonl(FW_IQ_CMD_FL0CNGCHMAP_V(cong) | FW_IQ_CMD_FL0CONGCIF_F | FW_IQ_CMD_FL0CONGEN_F); + /* In T6, for egress queue type FL there is internal overhead + * of 16B for header going into FLM module. Hence the maximum + * allowed burst size is 448 bytes. For T4/T5, the hardware + * doesn't coalesce fetch requests if more than 64 bytes of + * Free List pointers are provided, so we use a 128-byte Fetch + * Burst Minimum there (T6 implements coalescing so we can use + * the smaller 64-byte value there). + */ c.fl0dcaen_to_fl0cidxfthresh = - htons(FW_IQ_CMD_FL0FBMIN_V(FETCHBURSTMIN_64B_X) | + htons(FW_IQ_CMD_FL0FBMIN_V(chip <= CHELSIO_T5 ? + FETCHBURSTMIN_128B_X : + FETCHBURSTMIN_64B_X) | FW_IQ_CMD_FL0FBMAX_V((chip <= CHELSIO_T5) ? FETCHBURSTMAX_512B_X : FETCHBURSTMAX_256B_X)); diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_values.h b/drivers/net/ethernet/chelsio/cxgb4/t4_values.h index a5231fa771db..36cf3073ca37 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_values.h +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_values.h @@ -65,6 +65,7 @@ #define TIMERREG_COUNTER0_X 0 #define FETCHBURSTMIN_64B_X 2 +#define FETCHBURSTMIN_128B_X 3 #define FETCHBURSTMAX_256B_X 2 #define FETCHBURSTMAX_512B_X 3 diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c index 8337514ababb..91857b81009e 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c @@ -862,52 +862,6 @@ static struct net_device_stats *cxgb4vf_get_stats(struct net_device *dev) return ns; } -/* - * Collect up to maxaddrs worth of a netdevice's unicast addresses, starting - * at a specified offset within the list, into an array of addrss pointers and - * return the number collected. - */ -static inline unsigned int collect_netdev_uc_list_addrs(const struct net_device *dev, - const u8 **addr, - unsigned int offset, - unsigned int maxaddrs) -{ - unsigned int index = 0; - unsigned int naddr = 0; - const struct netdev_hw_addr *ha; - - for_each_dev_addr(dev, ha) - if (index++ >= offset) { - addr[naddr++] = ha->addr; - if (naddr >= maxaddrs) - break; - } - return naddr; -} - -/* - * Collect up to maxaddrs worth of a netdevice's multicast addresses, starting - * at a specified offset within the list, into an array of addrss pointers and - * return the number collected. - */ -static inline unsigned int collect_netdev_mc_list_addrs(const struct net_device *dev, - const u8 **addr, - unsigned int offset, - unsigned int maxaddrs) -{ - unsigned int index = 0; - unsigned int naddr = 0; - const struct netdev_hw_addr *ha; - - netdev_for_each_mc_addr(ha, dev) - if (index++ >= offset) { - addr[naddr++] = ha->addr; - if (naddr >= maxaddrs) - break; - } - return naddr; -} - static inline int cxgb4vf_set_addr_hash(struct port_info *pi) { struct adapter *adapter = pi->adapter; @@ -2237,16 +2191,6 @@ static int adap_init0(struct adapter *adapter) u32 param, val = 0; /* - * Wait for the device to become ready before proceeding ... - */ - err = t4vf_wait_dev_ready(adapter); - if (err) { - dev_err(adapter->pdev_dev, "device didn't become ready:" - " err=%d\n", err); - return err; - } - - /* * Some environments do not properly handle PCIE FLRs -- e.g. in Linux * 2.6.31 and later we can't call pci_reset_function() in order to * issue an FLR because of a self- deadlock on the device semaphore. diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/sge.c b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c index 6528231d8a59..1ccd282949a5 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c @@ -1864,7 +1864,7 @@ static int process_responses(struct sge_rspq *rspq, int budget) * for new buffer pointers, refill the Free List. */ if (rspq->offset >= 0 && - rxq->fl.size - rxq->fl.avail >= 2*FL_PER_EQ_UNIT) + fl_cap(&rxq->fl) - rxq->fl.avail >= 2*FL_PER_EQ_UNIT) __refill_fl(rspq->adapter, &rxq->fl); return budget - budget_left; } @@ -2300,9 +2300,20 @@ int t4vf_sge_alloc_rxq(struct adapter *adapter, struct sge_rspq *rspq, FW_IQ_CMD_FL0HOSTFCMODE_V(SGE_HOSTFCMODE_NONE) | FW_IQ_CMD_FL0PACKEN_F | FW_IQ_CMD_FL0PADEN_F); + + /* In T6, for egress queue type FL there is internal overhead + * of 16B for header going into FLM module. Hence the maximum + * allowed burst size is 448 bytes. For T4/T5, the hardware + * doesn't coalesce fetch requests if more than 64 bytes of + * Free List pointers are provided, so we use a 128-byte Fetch + * Burst Minimum there (T6 implements coalescing so we can use + * the smaller 64-byte value there). + */ cmd.fl0dcaen_to_fl0cidxfthresh = cpu_to_be16( - FW_IQ_CMD_FL0FBMIN_V(SGE_FETCHBURSTMIN_64B) | + FW_IQ_CMD_FL0FBMIN_V(chip <= CHELSIO_T5 ? + FETCHBURSTMIN_128B_X : + FETCHBURSTMIN_64B_X) | FW_IQ_CMD_FL0FBMAX_V((chip <= CHELSIO_T5) ? FETCHBURSTMAX_512B_X : FETCHBURSTMAX_256B_X)); @@ -2607,7 +2618,6 @@ int t4vf_sge_init(struct adapter *adapter) u32 fl0 = sge_params->sge_fl_buffer_size[0]; u32 fl1 = sge_params->sge_fl_buffer_size[1]; struct sge *s = &adapter->sge; - unsigned int ingpadboundary, ingpackboundary, ingpad_shift; /* * Start by vetting the basic SGE parameters which have been set up by @@ -2619,7 +2629,8 @@ int t4vf_sge_init(struct adapter *adapter) fl0, fl1); return -EINVAL; } - if ((sge_params->sge_control & RXPKTCPLMODE_F) == 0) { + if ((sge_params->sge_control & RXPKTCPLMODE_F) != + RXPKTCPLMODE_V(RXPKTCPLMODE_SPLIT_X)) { dev_err(adapter->pdev_dev, "bad SGE CPL MODE\n"); return -EINVAL; } @@ -2632,41 +2643,7 @@ int t4vf_sge_init(struct adapter *adapter) s->stat_len = ((sge_params->sge_control & EGRSTATUSPAGESIZE_F) ? 128 : 64); s->pktshift = PKTSHIFT_G(sge_params->sge_control); - - /* T4 uses a single control field to specify both the PCIe Padding and - * Packing Boundary. T5 introduced the ability to specify these - * separately. The actual Ingress Packet Data alignment boundary - * within Packed Buffer Mode is the maximum of these two - * specifications. (Note that it makes no real practical sense to - * have the Pading Boudary be larger than the Packing Boundary but you - * could set the chip up that way and, in fact, legacy T4 code would - * end doing this because it would initialize the Padding Boundary and - * leave the Packing Boundary initialized to 0 (16 bytes).) - * Padding Boundary values in T6 starts from 8B, - * where as it is 32B for T4 and T5. - */ - if (CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5) - ingpad_shift = INGPADBOUNDARY_SHIFT_X; - else - ingpad_shift = T6_INGPADBOUNDARY_SHIFT_X; - - ingpadboundary = 1 << (INGPADBOUNDARY_G(sge_params->sge_control) + - ingpad_shift); - if (is_t4(adapter->params.chip)) { - s->fl_align = ingpadboundary; - } else { - /* T5 has a different interpretation of one of the PCIe Packing - * Boundary values. - */ - ingpackboundary = INGPACKBOUNDARY_G(sge_params->sge_control2); - if (ingpackboundary == INGPACKBOUNDARY_16B_X) - ingpackboundary = 16; - else - ingpackboundary = 1 << (ingpackboundary + - INGPACKBOUNDARY_SHIFT_X); - - s->fl_align = max(ingpadboundary, ingpackboundary); - } + s->fl_align = t4vf_fl_pkt_align(adapter); /* A FL with <= fl_starve_thres buffers is starving and a periodic * timer will attempt to refill it. This needs to be larger than the diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h index 6ce302fe1a61..9b40a85cc1e4 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h +++ b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h @@ -309,6 +309,7 @@ int t4vf_port_init(struct adapter *, int); int t4vf_fw_reset(struct adapter *); int t4vf_set_params(struct adapter *, unsigned int, const u32 *, const u32 *); +int t4vf_fl_pkt_align(struct adapter *adapter); enum t4_bar2_qtype { T4_BAR2_QTYPE_EGRESS, T4_BAR2_QTYPE_INGRESS }; int t4vf_bar2_sge_qregs(struct adapter *adapter, unsigned int qid, diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c index 54220117dcba..fed83d88fc4e 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c @@ -418,6 +418,61 @@ int t4vf_set_params(struct adapter *adapter, unsigned int nparams, } /** + * t4vf_fl_pkt_align - return the fl packet alignment + * @adapter: the adapter + * + * T4 has a single field to specify the packing and padding boundary. + * T5 onwards has separate fields for this and hence the alignment for + * next packet offset is maximum of these two. And T6 changes the + * Ingress Padding Boundary Shift, so it's all a mess and it's best + * if we put this in low-level Common Code ... + * + */ +int t4vf_fl_pkt_align(struct adapter *adapter) +{ + u32 sge_control, sge_control2; + unsigned int ingpadboundary, ingpackboundary, fl_align, ingpad_shift; + + sge_control = adapter->params.sge.sge_control; + + /* T4 uses a single control field to specify both the PCIe Padding and + * Packing Boundary. T5 introduced the ability to specify these + * separately. The actual Ingress Packet Data alignment boundary + * within Packed Buffer Mode is the maximum of these two + * specifications. (Note that it makes no real practical sense to + * have the Pading Boudary be larger than the Packing Boundary but you + * could set the chip up that way and, in fact, legacy T4 code would + * end doing this because it would initialize the Padding Boundary and + * leave the Packing Boundary initialized to 0 (16 bytes).) + * Padding Boundary values in T6 starts from 8B, + * where as it is 32B for T4 and T5. + */ + if (CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5) + ingpad_shift = INGPADBOUNDARY_SHIFT_X; + else + ingpad_shift = T6_INGPADBOUNDARY_SHIFT_X; + + ingpadboundary = 1 << (INGPADBOUNDARY_G(sge_control) + ingpad_shift); + + fl_align = ingpadboundary; + if (!is_t4(adapter->params.chip)) { + /* T5 has a different interpretation of one of the PCIe Packing + * Boundary values. + */ + sge_control2 = adapter->params.sge.sge_control2; + ingpackboundary = INGPACKBOUNDARY_G(sge_control2); + if (ingpackboundary == INGPACKBOUNDARY_16B_X) + ingpackboundary = 16; + else + ingpackboundary = 1 << (ingpackboundary + + INGPACKBOUNDARY_SHIFT_X); + + fl_align = max(ingpadboundary, ingpackboundary); + } + return fl_align; +} + +/** * t4vf_bar2_sge_qregs - return BAR2 SGE Queue register information * @adapter: the adapter * @qid: the Queue ID |