aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/phy
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/phy')
-rw-r--r--drivers/usb/phy/phy-ab8500-usb.c33
-rw-r--r--drivers/usb/phy/phy-fsl-usb.c12
-rw-r--r--drivers/usb/phy/phy-isp1301.c7
-rw-r--r--drivers/usb/phy/phy-msm-usb.c51
-rw-r--r--drivers/usb/phy/phy-omap-otg.c24
-rw-r--r--drivers/usb/phy/phy-qcom-8x16-usb.c13
-rw-r--r--drivers/usb/phy/phy-tahvo.c10
7 files changed, 33 insertions, 117 deletions
diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c
index a03caf4b1327..61bf2285d5b1 100644
--- a/drivers/usb/phy/phy-ab8500-usb.c
+++ b/drivers/usb/phy/phy-ab8500-usb.c
@@ -1023,38 +1023,6 @@ static void ab8500_usb_vbus_turn_on_event_work(struct work_struct *work)
ab->enabled_charging_detection = true;
}
-static unsigned ab8500_eyediagram_workaroud(struct ab8500_usb *ab, unsigned mA)
-{
- /*
- * AB8500 V2 has eye diagram issues when drawing more than 100mA from
- * VBUS. Set charging current to 100mA in case of standard host
- */
- if (is_ab8500_2p0_or_earlier(ab->ab8500))
- if (mA > 100)
- mA = 100;
-
- return mA;
-}
-
-static int ab8500_usb_set_power(struct usb_phy *phy, unsigned mA)
-{
- struct ab8500_usb *ab;
-
- if (!phy)
- return -ENODEV;
-
- ab = phy_to_ab(phy);
-
- mA = ab8500_eyediagram_workaroud(ab, mA);
-
- ab->vbus_draw = mA;
-
- atomic_notifier_call_chain(&ab->phy.notifier,
- UX500_MUSB_VBUS, &ab->vbus_draw);
-
- return 0;
-}
-
static int ab8500_usb_set_suspend(struct usb_phy *x, int suspend)
{
/* TODO */
@@ -1392,7 +1360,6 @@ static int ab8500_usb_probe(struct platform_device *pdev)
ab->phy.otg = otg;
ab->phy.label = "ab8500";
ab->phy.set_suspend = ab8500_usb_set_suspend;
- ab->phy.set_power = ab8500_usb_set_power;
ab->phy.otg->state = OTG_STATE_UNDEFINED;
otg->usb_phy = &ab->phy;
diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c
index 94eb2923afed..392ab422163c 100644
--- a/drivers/usb/phy/phy-fsl-usb.c
+++ b/drivers/usb/phy/phy-fsl-usb.c
@@ -642,17 +642,6 @@ static int fsl_otg_set_peripheral(struct usb_otg *otg,
return 0;
}
-/* Set OTG port power, only for B-device */
-static int fsl_otg_set_power(struct usb_phy *phy, unsigned mA)
-{
- if (!fsl_otg_dev)
- return -ENODEV;
- if (phy->otg->state == OTG_STATE_B_PERIPHERAL)
- pr_info("FSL OTG: Draw %d mA\n", mA);
-
- return 0;
-}
-
/*
* Delayed pin detect interrupt processing.
*
@@ -821,7 +810,6 @@ static int fsl_otg_conf(struct platform_device *pdev)
/* initialize the otg structure */
fsl_otg_tc->phy.label = DRIVER_DESC;
fsl_otg_tc->phy.dev = &pdev->dev;
- fsl_otg_tc->phy.set_power = fsl_otg_set_power;
fsl_otg_tc->phy.otg->usb_phy = &fsl_otg_tc->phy;
fsl_otg_tc->phy.otg->set_host = fsl_otg_set_host;
diff --git a/drivers/usb/phy/phy-isp1301.c b/drivers/usb/phy/phy-isp1301.c
index db68156568e6..b3b33cf7ddf6 100644
--- a/drivers/usb/phy/phy-isp1301.c
+++ b/drivers/usb/phy/phy-isp1301.c
@@ -33,6 +33,12 @@ static const struct i2c_device_id isp1301_id[] = {
};
MODULE_DEVICE_TABLE(i2c, isp1301_id);
+static const struct of_device_id isp1301_of_match[] = {
+ {.compatible = "nxp,isp1301" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, isp1301_of_match);
+
static struct i2c_client *isp1301_i2c_client;
static int __isp1301_write(struct isp1301 *isp, u8 reg, u8 value, u8 clear)
@@ -130,6 +136,7 @@ static int isp1301_remove(struct i2c_client *client)
static struct i2c_driver isp1301_driver = {
.driver = {
.name = DRV_NAME,
+ .of_match_table = of_match_ptr(isp1301_of_match),
},
.probe = isp1301_probe,
.remove = isp1301_remove,
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index 8a34759727bb..93d9aaad2994 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -842,23 +842,6 @@ static void msm_otg_notify_charger(struct msm_otg *motg, unsigned mA)
motg->cur_power = mA;
}
-static int msm_otg_set_power(struct usb_phy *phy, unsigned mA)
-{
- struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
-
- /*
- * Gadget driver uses set_power method to notify about the
- * available current based on suspend/configured states.
- *
- * IDEV_CHG can be drawn irrespective of suspend/un-configured
- * states when CDP/ACA is connected.
- */
- if (motg->chg_type == USB_SDP_CHARGER)
- msm_otg_notify_charger(motg, mA);
-
- return 0;
-}
-
static void msm_otg_start_host(struct usb_phy *phy, int on)
{
struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
@@ -1742,14 +1725,14 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg)
if (!IS_ERR(ext_vbus)) {
motg->vbus.extcon = ext_vbus;
motg->vbus.nb.notifier_call = msm_otg_vbus_notifier;
- ret = extcon_register_notifier(ext_vbus, EXTCON_USB,
- &motg->vbus.nb);
+ ret = devm_extcon_register_notifier(&pdev->dev, ext_vbus,
+ EXTCON_USB, &motg->vbus.nb);
if (ret < 0) {
dev_err(&pdev->dev, "register VBUS notifier failed\n");
return ret;
}
- ret = extcon_get_cable_state_(ext_vbus, EXTCON_USB);
+ ret = extcon_get_state(ext_vbus, EXTCON_USB);
if (ret)
set_bit(B_SESS_VLD, &motg->inputs);
else
@@ -1759,16 +1742,14 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg)
if (!IS_ERR(ext_id)) {
motg->id.extcon = ext_id;
motg->id.nb.notifier_call = msm_otg_id_notifier;
- ret = extcon_register_notifier(ext_id, EXTCON_USB_HOST,
- &motg->id.nb);
+ ret = devm_extcon_register_notifier(&pdev->dev, ext_id,
+ EXTCON_USB_HOST, &motg->id.nb);
if (ret < 0) {
dev_err(&pdev->dev, "register ID notifier failed\n");
- extcon_unregister_notifier(motg->vbus.extcon,
- EXTCON_USB, &motg->vbus.nb);
return ret;
}
- ret = extcon_get_cable_state_(ext_id, EXTCON_USB_HOST);
+ ret = extcon_get_state(ext_id, EXTCON_USB_HOST);
if (ret)
clear_bit(ID, &motg->inputs);
else
@@ -1883,10 +1864,9 @@ static int msm_otg_probe(struct platform_device *pdev)
*/
if (motg->phy_number) {
phy_select = devm_ioremap_nocache(&pdev->dev, USB2_PHY_SEL, 4);
- if (!phy_select) {
- ret = -ENOMEM;
- goto unregister_extcon;
- }
+ if (!phy_select)
+ return -ENOMEM;
+
/* Enable second PHY with the OTG port */
writel(0x1, phy_select);
}
@@ -1897,7 +1877,7 @@ static int msm_otg_probe(struct platform_device *pdev)
if (motg->irq < 0) {
dev_err(&pdev->dev, "platform_get_irq failed\n");
ret = motg->irq;
- goto unregister_extcon;
+ return motg->irq;
}
regs[0].supply = "vddcx";
@@ -1906,7 +1886,7 @@ static int msm_otg_probe(struct platform_device *pdev)
ret = devm_regulator_bulk_get(motg->phy.dev, ARRAY_SIZE(regs), regs);
if (ret)
- goto unregister_extcon;
+ return ret;
motg->vddcx = regs[0].consumer;
motg->v3p3 = regs[1].consumer;
@@ -1950,7 +1930,6 @@ static int msm_otg_probe(struct platform_device *pdev)
}
phy->init = msm_phy_init;
- phy->set_power = msm_otg_set_power;
phy->notify_disconnect = msm_phy_notify_disconnect;
phy->type = USB_PHY_TYPE_USB2;
@@ -2003,11 +1982,6 @@ disable_clks:
clk_disable_unprepare(motg->clk);
if (!IS_ERR(motg->core_clk))
clk_disable_unprepare(motg->core_clk);
-unregister_extcon:
- extcon_unregister_notifier(motg->id.extcon,
- EXTCON_USB_HOST, &motg->id.nb);
- extcon_unregister_notifier(motg->vbus.extcon,
- EXTCON_USB, &motg->vbus.nb);
return ret;
}
@@ -2029,9 +2003,6 @@ static int msm_otg_remove(struct platform_device *pdev)
*/
gpiod_set_value_cansleep(motg->switch_gpio, 0);
- extcon_unregister_notifier(motg->id.extcon, EXTCON_USB_HOST, &motg->id.nb);
- extcon_unregister_notifier(motg->vbus.extcon, EXTCON_USB, &motg->vbus.nb);
-
msm_otg_debugfs_cleanup();
cancel_delayed_work_sync(&motg->chg_work);
cancel_work_sync(&motg->sm_work);
diff --git a/drivers/usb/phy/phy-omap-otg.c b/drivers/usb/phy/phy-omap-otg.c
index 6523af4f8f93..800d1d90753d 100644
--- a/drivers/usb/phy/phy-omap-otg.c
+++ b/drivers/usb/phy/phy-omap-otg.c
@@ -118,19 +118,19 @@ static int omap_otg_probe(struct platform_device *pdev)
otg_dev->id_nb.notifier_call = omap_otg_id_notifier;
otg_dev->vbus_nb.notifier_call = omap_otg_vbus_notifier;
- ret = extcon_register_notifier(extcon, EXTCON_USB_HOST, &otg_dev->id_nb);
+ ret = devm_extcon_register_notifier(&pdev->dev, extcon,
+ EXTCON_USB_HOST, &otg_dev->id_nb);
if (ret)
return ret;
- ret = extcon_register_notifier(extcon, EXTCON_USB, &otg_dev->vbus_nb);
+ ret = devm_extcon_register_notifier(&pdev->dev, extcon,
+ EXTCON_USB, &otg_dev->vbus_nb);
if (ret) {
- extcon_unregister_notifier(extcon, EXTCON_USB_HOST,
- &otg_dev->id_nb);
return ret;
}
- otg_dev->id = extcon_get_cable_state_(extcon, EXTCON_USB_HOST);
- otg_dev->vbus = extcon_get_cable_state_(extcon, EXTCON_USB);
+ otg_dev->id = extcon_get_state(extcon, EXTCON_USB_HOST);
+ otg_dev->vbus = extcon_get_state(extcon, EXTCON_USB);
omap_otg_set_mode(otg_dev);
rev = readl(otg_dev->base);
@@ -145,20 +145,8 @@ static int omap_otg_probe(struct platform_device *pdev)
return 0;
}
-static int omap_otg_remove(struct platform_device *pdev)
-{
- struct otg_device *otg_dev = platform_get_drvdata(pdev);
- struct extcon_dev *edev = otg_dev->extcon;
-
- extcon_unregister_notifier(edev, EXTCON_USB_HOST, &otg_dev->id_nb);
- extcon_unregister_notifier(edev, EXTCON_USB, &otg_dev->vbus_nb);
-
- return 0;
-}
-
static struct platform_driver omap_otg_driver = {
.probe = omap_otg_probe,
- .remove = omap_otg_remove,
.driver = {
.name = "omap_otg",
},
diff --git a/drivers/usb/phy/phy-qcom-8x16-usb.c b/drivers/usb/phy/phy-qcom-8x16-usb.c
index d8593adb3621..fdf686398772 100644
--- a/drivers/usb/phy/phy-qcom-8x16-usb.c
+++ b/drivers/usb/phy/phy-qcom-8x16-usb.c
@@ -187,7 +187,7 @@ static int phy_8x16_init(struct usb_phy *phy)
val = ULPI_PWR_OTG_COMP_DISABLE;
usb_phy_io_write(phy, val, ULPI_SET(ULPI_PWR_CLK_MNG_REG));
- state = extcon_get_cable_state_(qphy->vbus_edev, EXTCON_USB);
+ state = extcon_get_state(qphy->vbus_edev, EXTCON_USB);
if (state)
phy_8x16_vbus_on(qphy);
else
@@ -316,23 +316,20 @@ static int phy_8x16_probe(struct platform_device *pdev)
goto off_clks;
qphy->vbus_notify.notifier_call = phy_8x16_vbus_notify;
- ret = extcon_register_notifier(qphy->vbus_edev, EXTCON_USB,
- &qphy->vbus_notify);
+ ret = devm_extcon_register_notifier(&pdev->dev, qphy->vbus_edev,
+ EXTCON_USB, &qphy->vbus_notify);
if (ret < 0)
goto off_power;
ret = usb_add_phy_dev(&qphy->phy);
if (ret)
- goto off_extcon;
+ goto off_power;
qphy->reboot_notify.notifier_call = phy_8x16_reboot_notify;
register_reboot_notifier(&qphy->reboot_notify);
return 0;
-off_extcon:
- extcon_unregister_notifier(qphy->vbus_edev, EXTCON_USB,
- &qphy->vbus_notify);
off_power:
regulator_bulk_disable(ARRAY_SIZE(qphy->regulator), qphy->regulator);
off_clks:
@@ -347,8 +344,6 @@ static int phy_8x16_remove(struct platform_device *pdev)
struct phy_8x16 *qphy = platform_get_drvdata(pdev);
unregister_reboot_notifier(&qphy->reboot_notify);
- extcon_unregister_notifier(qphy->vbus_edev, EXTCON_USB,
- &qphy->vbus_notify);
/*
* Ensure that D+/D- lines are routed to uB connector, so
diff --git a/drivers/usb/phy/phy-tahvo.c b/drivers/usb/phy/phy-tahvo.c
index ab5d364f6e8c..a31c8682e998 100644
--- a/drivers/usb/phy/phy-tahvo.c
+++ b/drivers/usb/phy/phy-tahvo.c
@@ -121,7 +121,7 @@ static void check_vbus_state(struct tahvo_usb *tu)
prev_state = tu->vbus_state;
tu->vbus_state = reg & TAHVO_STAT_VBUS;
if (prev_state != tu->vbus_state) {
- extcon_set_cable_state_(tu->extcon, EXTCON_USB, tu->vbus_state);
+ extcon_set_state_sync(tu->extcon, EXTCON_USB, tu->vbus_state);
sysfs_notify(&tu->pt_dev->dev.kobj, NULL, "vbus_state");
}
}
@@ -130,7 +130,7 @@ static void tahvo_usb_become_host(struct tahvo_usb *tu)
{
struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent);
- extcon_set_cable_state_(tu->extcon, EXTCON_USB_HOST, true);
+ extcon_set_state_sync(tu->extcon, EXTCON_USB_HOST, true);
/* Power up the transceiver in USB host mode */
retu_write(rdev, TAHVO_REG_USBR, USBR_REGOUT | USBR_NSUSPEND |
@@ -149,7 +149,7 @@ static void tahvo_usb_become_peripheral(struct tahvo_usb *tu)
{
struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent);
- extcon_set_cable_state_(tu->extcon, EXTCON_USB_HOST, false);
+ extcon_set_state_sync(tu->extcon, EXTCON_USB_HOST, false);
/* Power up transceiver and set it in USB peripheral mode */
retu_write(rdev, TAHVO_REG_USBR, USBR_SLAVE_CONTROL | USBR_REGOUT |
@@ -379,9 +379,9 @@ static int tahvo_usb_probe(struct platform_device *pdev)
}
/* Set the initial cable state. */
- extcon_set_cable_state_(tu->extcon, EXTCON_USB_HOST,
+ extcon_set_state_sync(tu->extcon, EXTCON_USB_HOST,
tu->tahvo_mode == TAHVO_MODE_HOST);
- extcon_set_cable_state_(tu->extcon, EXTCON_USB, tu->vbus_state);
+ extcon_set_state_sync(tu->extcon, EXTCON_USB, tu->vbus_state);
/* Create OTG interface */
tahvo_usb_power_off(tu);
Powered by cgit, Gruvboxed by Blaster4385.