aboutsummaryrefslogtreecommitdiff
path: root/drivers/pci/controller/dwc/pcie-qcom.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci/controller/dwc/pcie-qcom.c')
-rw-r--r--drivers/pci/controller/dwc/pcie-qcom.c108
1 files changed, 82 insertions, 26 deletions
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 7a87a47eb7ed..14772edcf0d3 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -19,7 +19,7 @@
#include <linux/iopoll.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/of_device.h>
+#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/pci.h>
#include <linux/pm_runtime.h>
@@ -43,7 +43,6 @@
#define PARF_PHY_REFCLK 0x4c
#define PARF_CONFIG_BITS 0x50
#define PARF_DBI_BASE_ADDR 0x168
-#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3 0x16c /* Register offset specific to IP ver 2.3.3 */
#define PARF_MHI_CLOCK_RESET_CTRL 0x174
#define PARF_AXI_MSTR_WR_ADDR_HALT 0x178
#define PARF_AXI_MSTR_WR_ADDR_HALT_V2 0x1a8
@@ -54,6 +53,7 @@
#define PARF_SLV_ADDR_SPACE_SIZE 0x358
#define PARF_DEVICE_TYPE 0x1000
#define PARF_BDF_TO_SID_TABLE_N 0x2000
+#define PARF_BDF_TO_SID_CFG 0x2c00
/* ELBI registers */
#define ELBI_SYS_CTRL 0x04
@@ -121,6 +121,9 @@
/* PARF_DEVICE_TYPE register fields */
#define DEVICE_TYPE_RC 0x4
+/* PARF_BDF_TO_SID_CFG fields */
+#define BDF_TO_SID_BYPASS BIT(0)
+
/* ELBI_SYS_CTRL register fields */
#define ELBI_SYS_CTRL_LT_ENABLE BIT(0)
@@ -148,6 +151,9 @@
#define QCOM_PCIE_CRC8_POLYNOMIAL (BIT(2) | BIT(1) | BIT(0))
+#define QCOM_PCIE_LINK_SPEED_TO_BW(speed) \
+ Mbps_to_icc(PCIE_SPEED2MBS_ENC(pcie_link_speed[speed]))
+
#define QCOM_PCIE_1_0_0_MAX_CLOCKS 4
struct qcom_pcie_resources_1_0_0 {
struct clk_bulk_data clks[QCOM_PCIE_1_0_0_MAX_CLOCKS];
@@ -219,6 +225,7 @@ struct qcom_pcie_ops {
int (*get_resources)(struct qcom_pcie *pcie);
int (*init)(struct qcom_pcie *pcie);
int (*post_init)(struct qcom_pcie *pcie);
+ void (*host_post_init)(struct qcom_pcie *pcie);
void (*deinit)(struct qcom_pcie *pcie);
void (*ltssm_enable)(struct qcom_pcie *pcie);
int (*config_sid)(struct qcom_pcie *pcie);
@@ -226,6 +233,7 @@ struct qcom_pcie_ops {
struct qcom_pcie_cfg {
const struct qcom_pcie_ops *ops;
+ bool no_l0s;
};
struct qcom_pcie {
@@ -269,6 +277,26 @@ static int qcom_pcie_start_link(struct dw_pcie *pci)
return 0;
}
+static void qcom_pcie_clear_aspm_l0s(struct dw_pcie *pci)
+{
+ struct qcom_pcie *pcie = to_qcom_pcie(pci);
+ u16 offset;
+ u32 val;
+
+ if (!pcie->cfg->no_l0s)
+ return;
+
+ offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
+
+ dw_pcie_dbi_ro_wr_en(pci);
+
+ val = readl(pci->dbi_base + offset + PCI_EXP_LNKCAP);
+ val &= ~PCI_EXP_LNKCAP_ASPM_L0S;
+ writel(val, pci->dbi_base + offset + PCI_EXP_LNKCAP);
+
+ dw_pcie_dbi_ro_wr_dis(pci);
+}
+
static void qcom_pcie_clear_hpc(struct dw_pcie *pci)
{
u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
@@ -797,8 +825,7 @@ static int qcom_pcie_post_init_2_3_3(struct qcom_pcie *pcie)
u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
u32 val;
- writel(SLV_ADDR_SPACE_SZ,
- pcie->parf + PARF_SLV_ADDR_SPACE_SIZE_2_3_3);
+ writel(SLV_ADDR_SPACE_SZ, pcie->parf + PARF_SLV_ADDR_SPACE_SIZE);
val = readl(pcie->parf + PARF_PHY_CTRL);
val &= ~PHY_TEST_PWR_DOWN;
@@ -959,11 +986,31 @@ err_disable_regulators:
static int qcom_pcie_post_init_2_7_0(struct qcom_pcie *pcie)
{
+ qcom_pcie_clear_aspm_l0s(pcie->pci);
qcom_pcie_clear_hpc(pcie->pci);
return 0;
}
+static int qcom_pcie_enable_aspm(struct pci_dev *pdev, void *userdata)
+{
+ /*
+ * Downstream devices need to be in D0 state before enabling PCI PM
+ * substates.
+ */
+ pci_set_power_state_locked(pdev, PCI_D0);
+ pci_enable_link_state_locked(pdev, PCIE_LINK_STATE_ALL);
+
+ return 0;
+}
+
+static void qcom_pcie_host_post_init_2_7_0(struct qcom_pcie *pcie)
+{
+ struct dw_pcie_rp *pp = &pcie->pci->pp;
+
+ pci_walk_bus(pp->bridge->bus, qcom_pcie_enable_aspm, NULL);
+}
+
static void qcom_pcie_deinit_2_7_0(struct qcom_pcie *pcie)
{
struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
@@ -987,11 +1034,17 @@ static int qcom_pcie_config_sid_1_9_0(struct qcom_pcie *pcie)
u8 qcom_pcie_crc8_table[CRC8_TABLE_SIZE];
int i, nr_map, size = 0;
u32 smmu_sid_base;
+ u32 val;
of_get_property(dev->of_node, "iommu-map", &size);
if (!size)
return 0;
+ /* Enable BDF to SID translation by disabling bypass mode (default) */
+ val = readl(pcie->parf + PARF_BDF_TO_SID_CFG);
+ val &= ~BDF_TO_SID_BYPASS;
+ writel(val, pcie->parf + PARF_BDF_TO_SID_CFG);
+
map = kzalloc(size, GFP_KERNEL);
if (!map)
return -ENOMEM;
@@ -1216,9 +1269,19 @@ static void qcom_pcie_host_deinit(struct dw_pcie_rp *pp)
pcie->cfg->ops->deinit(pcie);
}
+static void qcom_pcie_host_post_init(struct dw_pcie_rp *pp)
+{
+ struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+ struct qcom_pcie *pcie = to_qcom_pcie(pci);
+
+ if (pcie->cfg->ops->host_post_init)
+ pcie->cfg->ops->host_post_init(pcie);
+}
+
static const struct dw_pcie_host_ops qcom_pcie_dw_ops = {
- .host_init = qcom_pcie_host_init,
- .host_deinit = qcom_pcie_host_deinit,
+ .init = qcom_pcie_host_init,
+ .deinit = qcom_pcie_host_deinit,
+ .post_init = qcom_pcie_host_post_init,
};
/* Qcom IP rev.: 2.1.0 Synopsys IP rev.: 4.01a */
@@ -1280,6 +1343,7 @@ static const struct qcom_pcie_ops ops_1_9_0 = {
.get_resources = qcom_pcie_get_resources_2_7_0,
.init = qcom_pcie_init_2_7_0,
.post_init = qcom_pcie_post_init_2_7_0,
+ .host_post_init = qcom_pcie_host_post_init_2_7_0,
.deinit = qcom_pcie_deinit_2_7_0,
.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
.config_sid = qcom_pcie_config_sid_1_9_0,
@@ -1326,6 +1390,11 @@ static const struct qcom_pcie_cfg cfg_2_9_0 = {
.ops = &ops_2_9_0,
};
+static const struct qcom_pcie_cfg cfg_sc8280xp = {
+ .ops = &ops_1_9_0,
+ .no_l0s = true,
+};
+
static const struct dw_pcie_ops dw_pcie_ops = {
.link_up = qcom_pcie_link_up,
.start_link = qcom_pcie_start_link,
@@ -1347,7 +1416,7 @@ static int qcom_pcie_icc_init(struct qcom_pcie *pcie)
* Set an initial peak bandwidth corresponding to single-lane Gen 1
* for the pcie-mem path.
*/
- ret = icc_set_bw(pcie->icc_mem, 0, MBps_to_icc(250));
+ ret = icc_set_bw(pcie->icc_mem, 0, QCOM_PCIE_LINK_SPEED_TO_BW(1));
if (ret) {
dev_err(pci->dev, "failed to set interconnect bandwidth: %d\n",
ret);
@@ -1360,7 +1429,7 @@ static int qcom_pcie_icc_init(struct qcom_pcie *pcie)
static void qcom_pcie_icc_update(struct qcom_pcie *pcie)
{
struct dw_pcie *pci = pcie->pci;
- u32 offset, status, bw;
+ u32 offset, status;
int speed, width;
int ret;
@@ -1377,22 +1446,7 @@ static void qcom_pcie_icc_update(struct qcom_pcie *pcie)
speed = FIELD_GET(PCI_EXP_LNKSTA_CLS, status);
width = FIELD_GET(PCI_EXP_LNKSTA_NLW, status);
- switch (speed) {
- case 1:
- bw = MBps_to_icc(250);
- break;
- case 2:
- bw = MBps_to_icc(500);
- break;
- default:
- WARN_ON_ONCE(1);
- fallthrough;
- case 3:
- bw = MBps_to_icc(985);
- break;
- }
-
- ret = icc_set_bw(pcie->icc_mem, 0, width * bw);
+ ret = icc_set_bw(pcie->icc_mem, 0, width * QCOM_PCIE_LINK_SPEED_TO_BW(speed));
if (ret) {
dev_err(pci->dev, "failed to set interconnect bandwidth: %d\n",
ret);
@@ -1612,10 +1666,11 @@ static const struct of_device_id qcom_pcie_match[] = {
{ .compatible = "qcom,pcie-ipq8074-gen3", .data = &cfg_2_9_0 },
{ .compatible = "qcom,pcie-msm8996", .data = &cfg_2_3_2 },
{ .compatible = "qcom,pcie-qcs404", .data = &cfg_2_4_0 },
- { .compatible = "qcom,pcie-sa8540p", .data = &cfg_1_9_0 },
+ { .compatible = "qcom,pcie-sa8540p", .data = &cfg_sc8280xp },
+ { .compatible = "qcom,pcie-sa8775p", .data = &cfg_1_9_0},
{ .compatible = "qcom,pcie-sc7280", .data = &cfg_1_9_0 },
{ .compatible = "qcom,pcie-sc8180x", .data = &cfg_1_9_0 },
- { .compatible = "qcom,pcie-sc8280xp", .data = &cfg_1_9_0 },
+ { .compatible = "qcom,pcie-sc8280xp", .data = &cfg_sc8280xp },
{ .compatible = "qcom,pcie-sdm845", .data = &cfg_2_7_0 },
{ .compatible = "qcom,pcie-sdx55", .data = &cfg_1_9_0 },
{ .compatible = "qcom,pcie-sm8150", .data = &cfg_1_9_0 },
@@ -1624,6 +1679,7 @@ static const struct of_device_id qcom_pcie_match[] = {
{ .compatible = "qcom,pcie-sm8450-pcie0", .data = &cfg_1_9_0 },
{ .compatible = "qcom,pcie-sm8450-pcie1", .data = &cfg_1_9_0 },
{ .compatible = "qcom,pcie-sm8550", .data = &cfg_1_9_0 },
+ { .compatible = "qcom,pcie-x1e80100", .data = &cfg_1_9_0 },
{ }
};