diff options
Diffstat (limited to 'drivers/pci/controller/dwc/pcie-qcom.c')
-rw-r--r-- | drivers/pci/controller/dwc/pcie-qcom.c | 72 |
1 files changed, 57 insertions, 15 deletions
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index a1d678fe7fa5..1923266acea8 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -45,6 +45,7 @@ #define PARF_PHY_REFCLK 0x4c #define PARF_CONFIG_BITS 0x50 #define PARF_DBI_BASE_ADDR 0x168 +#define PARF_SLV_ADDR_SPACE_SIZE 0x16c #define PARF_MHI_CLOCK_RESET_CTRL 0x174 #define PARF_AXI_MSTR_WR_ADDR_HALT 0x178 #define PARF_AXI_MSTR_WR_ADDR_HALT_V2 0x1a8 @@ -55,8 +56,13 @@ #define PARF_INT_ALL_MASK 0x22c #define PARF_SID_OFFSET 0x234 #define PARF_BDF_TRANSLATE_CFG 0x24c -#define PARF_SLV_ADDR_SPACE_SIZE 0x358 +#define PARF_DBI_BASE_ADDR_V2 0x350 +#define PARF_DBI_BASE_ADDR_V2_HI 0x354 +#define PARF_SLV_ADDR_SPACE_SIZE_V2 0x358 +#define PARF_SLV_ADDR_SPACE_SIZE_V2_HI 0x35c #define PARF_NO_SNOOP_OVERIDE 0x3d4 +#define PARF_ATU_BASE_ADDR 0x634 +#define PARF_ATU_BASE_ADDR_HI 0x638 #define PARF_DEVICE_TYPE 0x1000 #define PARF_BDF_TO_SID_TABLE_N 0x2000 #define PARF_BDF_TO_SID_CFG 0x2c00 @@ -111,7 +117,7 @@ #define PHY_RX0_EQ(x) FIELD_PREP(GENMASK(26, 24), x) /* PARF_SLV_ADDR_SPACE_SIZE register value */ -#define SLV_ADDR_SPACE_SZ 0x10000000 +#define SLV_ADDR_SPACE_SZ 0x80000000 /* PARF_MHI_CLOCK_RESET_CTRL register fields */ #define AHB_CLK_EN BIT(0) @@ -330,6 +336,50 @@ static void qcom_pcie_clear_hpc(struct dw_pcie *pci) dw_pcie_dbi_ro_wr_dis(pci); } +static void qcom_pcie_configure_dbi_base(struct qcom_pcie *pcie) +{ + struct dw_pcie *pci = pcie->pci; + + if (pci->dbi_phys_addr) { + /* + * PARF_DBI_BASE_ADDR register is in CPU domain and require to + * be programmed with CPU physical address. + */ + writel(lower_32_bits(pci->dbi_phys_addr), pcie->parf + + PARF_DBI_BASE_ADDR); + writel(SLV_ADDR_SPACE_SZ, pcie->parf + + PARF_SLV_ADDR_SPACE_SIZE); + } +} + +static void qcom_pcie_configure_dbi_atu_base(struct qcom_pcie *pcie) +{ + struct dw_pcie *pci = pcie->pci; + + if (pci->dbi_phys_addr) { + /* + * PARF_DBI_BASE_ADDR_V2 and PARF_ATU_BASE_ADDR registers are + * in CPU domain and require to be programmed with CPU + * physical addresses. + */ + writel(lower_32_bits(pci->dbi_phys_addr), pcie->parf + + PARF_DBI_BASE_ADDR_V2); + writel(upper_32_bits(pci->dbi_phys_addr), pcie->parf + + PARF_DBI_BASE_ADDR_V2_HI); + + if (pci->atu_phys_addr) { + writel(lower_32_bits(pci->atu_phys_addr), pcie->parf + + PARF_ATU_BASE_ADDR); + writel(upper_32_bits(pci->atu_phys_addr), pcie->parf + + PARF_ATU_BASE_ADDR_HI); + } + + writel(0x0, pcie->parf + PARF_SLV_ADDR_SPACE_SIZE_V2); + writel(SLV_ADDR_SPACE_SZ, pcie->parf + + PARF_SLV_ADDR_SPACE_SIZE_V2_HI); + } +} + static void qcom_pcie_2_1_0_ltssm_enable(struct qcom_pcie *pcie) { u32 val; @@ -546,8 +596,7 @@ err_assert_reset: static int qcom_pcie_post_init_1_0_0(struct qcom_pcie *pcie) { - /* change DBI base address */ - writel(0, pcie->parf + PARF_DBI_BASE_ADDR); + qcom_pcie_configure_dbi_base(pcie); if (IS_ENABLED(CONFIG_PCI_MSI)) { u32 val = readl(pcie->parf + PARF_AXI_MSTR_WR_ADDR_HALT); @@ -634,8 +683,7 @@ static int qcom_pcie_post_init_2_3_2(struct qcom_pcie *pcie) val &= ~PHY_TEST_PWR_DOWN; writel(val, pcie->parf + PARF_PHY_CTRL); - /* change DBI base address */ - writel(0, pcie->parf + PARF_DBI_BASE_ADDR); + qcom_pcie_configure_dbi_base(pcie); /* MAC PHY_POWERDOWN MUX DISABLE */ val = readl(pcie->parf + PARF_SYS_CTRL); @@ -817,13 +865,11 @@ static int qcom_pcie_post_init_2_3_3(struct qcom_pcie *pcie) u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); u32 val; - writel(SLV_ADDR_SPACE_SZ, pcie->parf + PARF_SLV_ADDR_SPACE_SIZE); - val = readl(pcie->parf + PARF_PHY_CTRL); val &= ~PHY_TEST_PWR_DOWN; writel(val, pcie->parf + PARF_PHY_CTRL); - writel(0, pcie->parf + PARF_DBI_BASE_ADDR); + qcom_pcie_configure_dbi_atu_base(pcie); writel(MST_WAKEUP_EN | SLV_WAKEUP_EN | MSTR_ACLK_CGC_DIS | SLV_ACLK_CGC_DIS | CORE_CLK_CGC_DIS | @@ -919,8 +965,7 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie) val &= ~PHY_TEST_PWR_DOWN; writel(val, pcie->parf + PARF_PHY_CTRL); - /* change DBI base address */ - writel(0, pcie->parf + PARF_DBI_BASE_ADDR); + qcom_pcie_configure_dbi_atu_base(pcie); /* MAC PHY_POWERDOWN MUX DISABLE */ val = readl(pcie->parf + PARF_SYS_CTRL); @@ -1129,14 +1174,11 @@ static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie) u32 val; int i; - writel(SLV_ADDR_SPACE_SZ, - pcie->parf + PARF_SLV_ADDR_SPACE_SIZE); - val = readl(pcie->parf + PARF_PHY_CTRL); val &= ~PHY_TEST_PWR_DOWN; writel(val, pcie->parf + PARF_PHY_CTRL); - writel(0, pcie->parf + PARF_DBI_BASE_ADDR); + qcom_pcie_configure_dbi_atu_base(pcie); writel(DEVICE_TYPE_RC, pcie->parf + PARF_DEVICE_TYPE); writel(BYPASS | MSTR_AXI_CLK_EN | AHB_CLK_EN, |