diff options
Diffstat (limited to 'drivers/pci/controller/dwc/pcie-designware-ep.c')
| -rw-r--r-- | drivers/pci/controller/dwc/pcie-designware-ep.c | 103 |
1 files changed, 68 insertions, 35 deletions
diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c index 51571da24601..705533e789f3 100644 --- a/drivers/pci/controller/dwc/pcie-designware-ep.c +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c @@ -16,18 +16,6 @@ #include <linux/pci-epf.h> /** - * dw_pcie_ep_linkup - Notify EPF drivers about Link Up event - * @ep: DWC EP device - */ -void dw_pcie_ep_linkup(struct dw_pcie_ep *ep) -{ - struct pci_epc *epc = ep->epc; - - pci_epc_linkup(epc); -} -EXPORT_SYMBOL_GPL(dw_pcie_ep_linkup); - -/** * dw_pcie_ep_init_notify - Notify EPF drivers about EPC initialization complete * @ep: DWC EP device */ @@ -685,6 +673,34 @@ static unsigned int dw_pcie_ep_find_ext_capability(struct dw_pcie *pci, int cap) return 0; } +static void dw_pcie_ep_init_non_sticky_registers(struct dw_pcie *pci) +{ + unsigned int offset; + unsigned int nbars; + u32 reg, i; + + offset = dw_pcie_ep_find_ext_capability(pci, PCI_EXT_CAP_ID_REBAR); + + dw_pcie_dbi_ro_wr_en(pci); + + if (offset) { + reg = dw_pcie_readl_dbi(pci, offset + PCI_REBAR_CTRL); + nbars = (reg & PCI_REBAR_CTRL_NBAR_MASK) >> + PCI_REBAR_CTRL_NBAR_SHIFT; + + /* + * PCIe r6.0, sec 7.8.6.2 require us to support at least one + * size in the range from 1 MB to 512 GB. Advertise support + * for 1 MB BAR size only. + */ + for (i = 0; i < nbars; i++, offset += PCI_REBAR_CTRL) + dw_pcie_writel_dbi(pci, offset + PCI_REBAR_CAP, 0x0); + } + + dw_pcie_setup(pci); + dw_pcie_dbi_ro_wr_dis(pci); +} + /** * dw_pcie_ep_init_registers - Initialize DWC EP specific registers * @ep: DWC EP device @@ -699,13 +715,11 @@ int dw_pcie_ep_init_registers(struct dw_pcie_ep *ep) struct dw_pcie_ep_func *ep_func; struct device *dev = pci->dev; struct pci_epc *epc = ep->epc; - unsigned int offset, ptm_cap_base; - unsigned int nbars; + u32 ptm_cap_base, reg; u8 hdr_type; u8 func_no; - int i, ret; void *addr; - u32 reg; + int ret; hdr_type = dw_pcie_readb_dbi(pci, PCI_HEADER_TYPE) & PCI_HEADER_TYPE_MASK; @@ -768,25 +782,8 @@ int dw_pcie_ep_init_registers(struct dw_pcie_ep *ep) if (ep->ops->init) ep->ops->init(ep); - offset = dw_pcie_ep_find_ext_capability(pci, PCI_EXT_CAP_ID_REBAR); ptm_cap_base = dw_pcie_ep_find_ext_capability(pci, PCI_EXT_CAP_ID_PTM); - dw_pcie_dbi_ro_wr_en(pci); - - if (offset) { - reg = dw_pcie_readl_dbi(pci, offset + PCI_REBAR_CTRL); - nbars = (reg & PCI_REBAR_CTRL_NBAR_MASK) >> - PCI_REBAR_CTRL_NBAR_SHIFT; - - /* - * PCIe r6.0, sec 7.8.6.2 require us to support at least one - * size in the range from 1 MB to 512 GB. Advertise support - * for 1 MB BAR size only. - */ - for (i = 0; i < nbars; i++, offset += PCI_REBAR_CTRL) - dw_pcie_writel_dbi(pci, offset + PCI_REBAR_CAP, BIT(4)); - } - /* * PTM responder capability can be disabled only after disabling * PTM root capability. @@ -803,8 +800,7 @@ int dw_pcie_ep_init_registers(struct dw_pcie_ep *ep) dw_pcie_dbi_ro_wr_dis(pci); } - dw_pcie_setup(pci); - dw_pcie_dbi_ro_wr_dis(pci); + dw_pcie_ep_init_non_sticky_registers(pci); return 0; @@ -816,6 +812,43 @@ err_remove_edma: EXPORT_SYMBOL_GPL(dw_pcie_ep_init_registers); /** + * dw_pcie_ep_linkup - Notify EPF drivers about Link Up event + * @ep: DWC EP device + */ +void dw_pcie_ep_linkup(struct dw_pcie_ep *ep) +{ + struct pci_epc *epc = ep->epc; + + pci_epc_linkup(epc); +} +EXPORT_SYMBOL_GPL(dw_pcie_ep_linkup); + +/** + * dw_pcie_ep_linkdown - Notify EPF drivers about Link Down event + * @ep: DWC EP device + * + * Non-sticky registers are also initialized before sending the notification to + * the EPF drivers. This is needed since the registers need to be initialized + * before the link comes back again. + */ +void dw_pcie_ep_linkdown(struct dw_pcie_ep *ep) +{ + struct dw_pcie *pci = to_dw_pcie_from_ep(ep); + struct pci_epc *epc = ep->epc; + + /* + * Initialize the non-sticky DWC registers as they would've reset post + * Link Down. This is specifically needed for drivers not supporting + * PERST# as they have no way to reinitialize the registers before the + * link comes back again. + */ + dw_pcie_ep_init_non_sticky_registers(pci); + + pci_epc_linkdown(epc); +} +EXPORT_SYMBOL_GPL(dw_pcie_ep_linkdown); + +/** * dw_pcie_ep_init - Initialize the endpoint device * @ep: DWC EP device * |