diff options
Diffstat (limited to 'drivers/net/phy/dp83tg720.c')
| -rw-r--r-- | drivers/net/phy/dp83tg720.c | 24 |
1 files changed, 21 insertions, 3 deletions
diff --git a/drivers/net/phy/dp83tg720.c b/drivers/net/phy/dp83tg720.c index 1186dfc70fb3..c706429b225a 100644 --- a/drivers/net/phy/dp83tg720.c +++ b/drivers/net/phy/dp83tg720.c @@ -36,11 +36,20 @@ static int dp83tg720_config_aneg(struct phy_device *phydev) { + int ret; + /* Autoneg is not supported and this PHY supports only one speed. * We need to care only about master/slave configuration if it was * changed by user. */ - return genphy_c45_pma_baset1_setup_master_slave(phydev); + ret = genphy_c45_pma_baset1_setup_master_slave(phydev); + if (ret) + return ret; + + /* Re-read role configuration to make changes visible even if + * the link is in administrative down state. + */ + return genphy_c45_pma_baset1_read_master_slave(phydev); } static int dp83tg720_read_status(struct phy_device *phydev) @@ -69,6 +78,8 @@ static int dp83tg720_read_status(struct phy_device *phydev) return ret; /* After HW reset we need to restore master/slave configuration. + * genphy_c45_pma_baset1_read_master_slave() call will be done + * by the dp83tg720_config_aneg() function. */ ret = dp83tg720_config_aneg(phydev); if (ret) @@ -168,8 +179,15 @@ static int dp83tg720_config_init(struct phy_device *phydev) /* In case the PHY is bootstrapped in managed mode, we need to * wake it. */ - return phy_write_mmd(phydev, MDIO_MMD_VEND2, DP83TG720S_LPS_CFG3, - DP83TG720S_LPS_CFG3_PWR_MODE_0); + ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, DP83TG720S_LPS_CFG3, + DP83TG720S_LPS_CFG3_PWR_MODE_0); + if (ret) + return ret; + + /* Make role configuration visible for ethtool on init and after + * rest. + */ + return genphy_c45_pma_baset1_read_master_slave(phydev); } static struct phy_driver dp83tg720_driver[] = { |