diff options
Diffstat (limited to 'drivers/net/ethernet/intel/ixgb/ixgb_param.c')
| -rw-r--r-- | drivers/net/ethernet/intel/ixgb/ixgb_param.c | 442 |
1 files changed, 0 insertions, 442 deletions
diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_param.c b/drivers/net/ethernet/intel/ixgb/ixgb_param.c deleted file mode 100644 index d40f96250691..000000000000 --- a/drivers/net/ethernet/intel/ixgb/ixgb_param.c +++ /dev/null @@ -1,442 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* Copyright(c) 1999 - 2008 Intel Corporation. */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include "ixgb.h" - -/* This is the only thing that needs to be changed to adjust the - * maximum number of ports that the driver can manage. - */ - -#define IXGB_MAX_NIC 8 - -#define OPTION_UNSET -1 -#define OPTION_DISABLED 0 -#define OPTION_ENABLED 1 - -/* All parameters are treated the same, as an integer array of values. - * This macro just reduces the need to repeat the same declaration code - * over and over (plus this helps to avoid typo bugs). - */ - -#define IXGB_PARAM_INIT { [0 ... IXGB_MAX_NIC] = OPTION_UNSET } -#define IXGB_PARAM(X, desc) \ - static int X[IXGB_MAX_NIC+1] \ - = IXGB_PARAM_INIT; \ - static unsigned int num_##X = 0; \ - module_param_array_named(X, X, int, &num_##X, 0); \ - MODULE_PARM_DESC(X, desc); - -/* Transmit Descriptor Count - * - * Valid Range: 64-4096 - * - * Default Value: 256 - */ - -IXGB_PARAM(TxDescriptors, "Number of transmit descriptors"); - -/* Receive Descriptor Count - * - * Valid Range: 64-4096 - * - * Default Value: 1024 - */ - -IXGB_PARAM(RxDescriptors, "Number of receive descriptors"); - -/* User Specified Flow Control Override - * - * Valid Range: 0-3 - * - 0 - No Flow Control - * - 1 - Rx only, respond to PAUSE frames but do not generate them - * - 2 - Tx only, generate PAUSE frames but ignore them on receive - * - 3 - Full Flow Control Support - * - * Default Value: 2 - Tx only (silicon bug avoidance) - */ - -IXGB_PARAM(FlowControl, "Flow Control setting"); - -/* XsumRX - Receive Checksum Offload Enable/Disable - * - * Valid Range: 0, 1 - * - 0 - disables all checksum offload - * - 1 - enables receive IP/TCP/UDP checksum offload - * on 82597 based NICs - * - * Default Value: 1 - */ - -IXGB_PARAM(XsumRX, "Disable or enable Receive Checksum offload"); - -/* Transmit Interrupt Delay in units of 0.8192 microseconds - * - * Valid Range: 0-65535 - * - * Default Value: 32 - */ - -IXGB_PARAM(TxIntDelay, "Transmit Interrupt Delay"); - -/* Receive Interrupt Delay in units of 0.8192 microseconds - * - * Valid Range: 0-65535 - * - * Default Value: 72 - */ - -IXGB_PARAM(RxIntDelay, "Receive Interrupt Delay"); - -/* Receive Flow control high threshold (when we send a pause frame) - * (FCRTH) - * - * Valid Range: 1,536 - 262,136 (0x600 - 0x3FFF8, 8 byte granularity) - * - * Default Value: 196,608 (0x30000) - */ - -IXGB_PARAM(RxFCHighThresh, "Receive Flow Control High Threshold"); - -/* Receive Flow control low threshold (when we send a resume frame) - * (FCRTL) - * - * Valid Range: 64 - 262,136 (0x40 - 0x3FFF8, 8 byte granularity) - * must be less than high threshold by at least 8 bytes - * - * Default Value: 163,840 (0x28000) - */ - -IXGB_PARAM(RxFCLowThresh, "Receive Flow Control Low Threshold"); - -/* Flow control request timeout (how long to pause the link partner's tx) - * (PAP 15:0) - * - * Valid Range: 1 - 65535 - * - * Default Value: 65535 (0xffff) (we'll send an xon if we recover) - */ - -IXGB_PARAM(FCReqTimeout, "Flow Control Request Timeout"); - -/* Interrupt Delay Enable - * - * Valid Range: 0, 1 - * - * - 0 - disables transmit interrupt delay - * - 1 - enables transmmit interrupt delay - * - * Default Value: 1 - */ - -IXGB_PARAM(IntDelayEnable, "Transmit Interrupt Delay Enable"); - - -#define DEFAULT_TIDV 32 -#define MAX_TIDV 0xFFFF -#define MIN_TIDV 0 - -#define DEFAULT_RDTR 72 -#define MAX_RDTR 0xFFFF -#define MIN_RDTR 0 - -#define DEFAULT_FCRTL 0x28000 -#define DEFAULT_FCRTH 0x30000 -#define MIN_FCRTL 0 -#define MAX_FCRTL 0x3FFE8 -#define MIN_FCRTH 8 -#define MAX_FCRTH 0x3FFF0 - -#define MIN_FCPAUSE 1 -#define MAX_FCPAUSE 0xffff -#define DEFAULT_FCPAUSE 0xFFFF /* this may be too long */ - -struct ixgb_option { - enum { enable_option, range_option, list_option } type; - const char *name; - const char *err; - int def; - union { - struct { /* range_option info */ - int min; - int max; - } r; - struct { /* list_option info */ - int nr; - const struct ixgb_opt_list { - int i; - const char *str; - } *p; - } l; - } arg; -}; - -static int -ixgb_validate_option(unsigned int *value, const struct ixgb_option *opt) -{ - if (*value == OPTION_UNSET) { - *value = opt->def; - return 0; - } - - switch (opt->type) { - case enable_option: - switch (*value) { - case OPTION_ENABLED: - pr_info("%s Enabled\n", opt->name); - return 0; - case OPTION_DISABLED: - pr_info("%s Disabled\n", opt->name); - return 0; - } - break; - case range_option: - if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) { - pr_info("%s set to %i\n", opt->name, *value); - return 0; - } - break; - case list_option: { - int i; - const struct ixgb_opt_list *ent; - - for (i = 0; i < opt->arg.l.nr; i++) { - ent = &opt->arg.l.p[i]; - if (*value == ent->i) { - if (ent->str[0] != '\0') - pr_info("%s\n", ent->str); - return 0; - } - } - } - break; - default: - BUG(); - } - - pr_info("Invalid %s specified (%i) %s\n", opt->name, *value, opt->err); - *value = opt->def; - return -1; -} - -/** - * ixgb_check_options - Range Checking for Command Line Parameters - * @adapter: board private structure - * - * This routine checks all command line parameters for valid user - * input. If an invalid value is given, or if no user specified - * value exists, a default value is used. The final value is stored - * in a variable in the adapter structure. - **/ - -void -ixgb_check_options(struct ixgb_adapter *adapter) -{ - int bd = adapter->bd_number; - if (bd >= IXGB_MAX_NIC) { - pr_notice("Warning: no configuration for board #%i\n", bd); - pr_notice("Using defaults for all values\n"); - } - - { /* Transmit Descriptor Count */ - static const struct ixgb_option opt = { - .type = range_option, - .name = "Transmit Descriptors", - .err = "using default of " __MODULE_STRING(DEFAULT_TXD), - .def = DEFAULT_TXD, - .arg = { .r = { .min = MIN_TXD, - .max = MAX_TXD}} - }; - struct ixgb_desc_ring *tx_ring = &adapter->tx_ring; - - if (num_TxDescriptors > bd) { - tx_ring->count = TxDescriptors[bd]; - ixgb_validate_option(&tx_ring->count, &opt); - } else { - tx_ring->count = opt.def; - } - tx_ring->count = ALIGN(tx_ring->count, IXGB_REQ_TX_DESCRIPTOR_MULTIPLE); - } - { /* Receive Descriptor Count */ - static const struct ixgb_option opt = { - .type = range_option, - .name = "Receive Descriptors", - .err = "using default of " __MODULE_STRING(DEFAULT_RXD), - .def = DEFAULT_RXD, - .arg = { .r = { .min = MIN_RXD, - .max = MAX_RXD}} - }; - struct ixgb_desc_ring *rx_ring = &adapter->rx_ring; - - if (num_RxDescriptors > bd) { - rx_ring->count = RxDescriptors[bd]; - ixgb_validate_option(&rx_ring->count, &opt); - } else { - rx_ring->count = opt.def; - } - rx_ring->count = ALIGN(rx_ring->count, IXGB_REQ_RX_DESCRIPTOR_MULTIPLE); - } - { /* Receive Checksum Offload Enable */ - static const struct ixgb_option opt = { - .type = enable_option, - .name = "Receive Checksum Offload", - .err = "defaulting to Enabled", - .def = OPTION_ENABLED - }; - - if (num_XsumRX > bd) { - unsigned int rx_csum = XsumRX[bd]; - ixgb_validate_option(&rx_csum, &opt); - adapter->rx_csum = rx_csum; - } else { - adapter->rx_csum = opt.def; - } - } - { /* Flow Control */ - - static const struct ixgb_opt_list fc_list[] = { - { ixgb_fc_none, "Flow Control Disabled" }, - { ixgb_fc_rx_pause, "Flow Control Receive Only" }, - { ixgb_fc_tx_pause, "Flow Control Transmit Only" }, - { ixgb_fc_full, "Flow Control Enabled" }, - { ixgb_fc_default, "Flow Control Hardware Default" } - }; - - static const struct ixgb_option opt = { - .type = list_option, - .name = "Flow Control", - .err = "reading default settings from EEPROM", - .def = ixgb_fc_tx_pause, - .arg = { .l = { .nr = ARRAY_SIZE(fc_list), - .p = fc_list }} - }; - - if (num_FlowControl > bd) { - unsigned int fc = FlowControl[bd]; - ixgb_validate_option(&fc, &opt); - adapter->hw.fc.type = fc; - } else { - adapter->hw.fc.type = opt.def; - } - } - { /* Receive Flow Control High Threshold */ - static const struct ixgb_option opt = { - .type = range_option, - .name = "Rx Flow Control High Threshold", - .err = "using default of " __MODULE_STRING(DEFAULT_FCRTH), - .def = DEFAULT_FCRTH, - .arg = { .r = { .min = MIN_FCRTH, - .max = MAX_FCRTH}} - }; - - if (num_RxFCHighThresh > bd) { - adapter->hw.fc.high_water = RxFCHighThresh[bd]; - ixgb_validate_option(&adapter->hw.fc.high_water, &opt); - } else { - adapter->hw.fc.high_water = opt.def; - } - if (!(adapter->hw.fc.type & ixgb_fc_tx_pause) ) - pr_info("Ignoring RxFCHighThresh when no RxFC\n"); - } - { /* Receive Flow Control Low Threshold */ - static const struct ixgb_option opt = { - .type = range_option, - .name = "Rx Flow Control Low Threshold", - .err = "using default of " __MODULE_STRING(DEFAULT_FCRTL), - .def = DEFAULT_FCRTL, - .arg = { .r = { .min = MIN_FCRTL, - .max = MAX_FCRTL}} - }; - - if (num_RxFCLowThresh > bd) { - adapter->hw.fc.low_water = RxFCLowThresh[bd]; - ixgb_validate_option(&adapter->hw.fc.low_water, &opt); - } else { - adapter->hw.fc.low_water = opt.def; - } - if (!(adapter->hw.fc.type & ixgb_fc_tx_pause) ) - pr_info("Ignoring RxFCLowThresh when no RxFC\n"); - } - { /* Flow Control Pause Time Request*/ - static const struct ixgb_option opt = { - .type = range_option, - .name = "Flow Control Pause Time Request", - .err = "using default of "__MODULE_STRING(DEFAULT_FCPAUSE), - .def = DEFAULT_FCPAUSE, - .arg = { .r = { .min = MIN_FCPAUSE, - .max = MAX_FCPAUSE}} - }; - - if (num_FCReqTimeout > bd) { - unsigned int pause_time = FCReqTimeout[bd]; - ixgb_validate_option(&pause_time, &opt); - adapter->hw.fc.pause_time = pause_time; - } else { - adapter->hw.fc.pause_time = opt.def; - } - if (!(adapter->hw.fc.type & ixgb_fc_tx_pause) ) - pr_info("Ignoring FCReqTimeout when no RxFC\n"); - } - /* high low and spacing check for rx flow control thresholds */ - if (adapter->hw.fc.type & ixgb_fc_tx_pause) { - /* high must be greater than low */ - if (adapter->hw.fc.high_water < (adapter->hw.fc.low_water + 8)) { - /* set defaults */ - pr_info("RxFCHighThresh must be >= (RxFCLowThresh + 8), Using Defaults\n"); - adapter->hw.fc.high_water = DEFAULT_FCRTH; - adapter->hw.fc.low_water = DEFAULT_FCRTL; - } - } - { /* Receive Interrupt Delay */ - static const struct ixgb_option opt = { - .type = range_option, - .name = "Receive Interrupt Delay", - .err = "using default of " __MODULE_STRING(DEFAULT_RDTR), - .def = DEFAULT_RDTR, - .arg = { .r = { .min = MIN_RDTR, - .max = MAX_RDTR}} - }; - - if (num_RxIntDelay > bd) { - adapter->rx_int_delay = RxIntDelay[bd]; - ixgb_validate_option(&adapter->rx_int_delay, &opt); - } else { - adapter->rx_int_delay = opt.def; - } - } - { /* Transmit Interrupt Delay */ - static const struct ixgb_option opt = { - .type = range_option, - .name = "Transmit Interrupt Delay", - .err = "using default of " __MODULE_STRING(DEFAULT_TIDV), - .def = DEFAULT_TIDV, - .arg = { .r = { .min = MIN_TIDV, - .max = MAX_TIDV}} - }; - - if (num_TxIntDelay > bd) { - adapter->tx_int_delay = TxIntDelay[bd]; - ixgb_validate_option(&adapter->tx_int_delay, &opt); - } else { - adapter->tx_int_delay = opt.def; - } - } - - { /* Transmit Interrupt Delay Enable */ - static const struct ixgb_option opt = { - .type = enable_option, - .name = "Tx Interrupt Delay Enable", - .err = "defaulting to Enabled", - .def = OPTION_ENABLED - }; - - if (num_IntDelayEnable > bd) { - unsigned int ide = IntDelayEnable[bd]; - ixgb_validate_option(&ide, &opt); - adapter->tx_int_delay_enable = ide; - } else { - adapter->tx_int_delay_enable = opt.def; - } - } -} |