diff options
Diffstat (limited to 'drivers/net/can/dev')
| -rw-r--r-- | drivers/net/can/dev/Makefile | 17 | ||||
| -rw-r--r-- | drivers/net/can/dev/bittiming.c | 197 | ||||
| -rw-r--r-- | drivers/net/can/dev/calc_bittiming.c | 202 | ||||
| -rw-r--r-- | drivers/net/can/dev/dev.c | 59 | ||||
| -rw-r--r-- | drivers/net/can/dev/netlink.c | 9 | ||||
| -rw-r--r-- | drivers/net/can/dev/skb.c | 78 |
6 files changed, 347 insertions, 215 deletions
diff --git a/drivers/net/can/dev/Makefile b/drivers/net/can/dev/Makefile index af2901db473c..633687d6b6c0 100644 --- a/drivers/net/can/dev/Makefile +++ b/drivers/net/can/dev/Makefile @@ -1,9 +1,12 @@ # SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_CAN_DEV) += can-dev.o -can-dev-y += bittiming.o -can-dev-y += dev.o -can-dev-y += length.o -can-dev-y += netlink.o -can-dev-y += rx-offload.o -can-dev-y += skb.o +obj-$(CONFIG_CAN_DEV) += can-dev.o + +can-dev-y += skb.o + +can-dev-$(CONFIG_CAN_CALC_BITTIMING) += calc_bittiming.o +can-dev-$(CONFIG_CAN_NETLINK) += bittiming.o +can-dev-$(CONFIG_CAN_NETLINK) += dev.o +can-dev-$(CONFIG_CAN_NETLINK) += length.o +can-dev-$(CONFIG_CAN_NETLINK) += netlink.o +can-dev-$(CONFIG_CAN_RX_OFFLOAD) += rx-offload.o diff --git a/drivers/net/can/dev/bittiming.c b/drivers/net/can/dev/bittiming.c index c1e76f0a5064..7ae80763c960 100644 --- a/drivers/net/can/dev/bittiming.c +++ b/drivers/net/can/dev/bittiming.c @@ -4,205 +4,8 @@ * Copyright (C) 2008-2009 Wolfgang Grandegger <wg@grandegger.com> */ -#include <linux/units.h> #include <linux/can/dev.h> -#ifdef CONFIG_CAN_CALC_BITTIMING -#define CAN_CALC_MAX_ERROR 50 /* in one-tenth of a percent */ - -/* Bit-timing calculation derived from: - * - * Code based on LinCAN sources and H8S2638 project - * Copyright 2004-2006 Pavel Pisa - DCE FELK CVUT cz - * Copyright 2005 Stanislav Marek - * email: pisa@cmp.felk.cvut.cz - * - * Calculates proper bit-timing parameters for a specified bit-rate - * and sample-point, which can then be used to set the bit-timing - * registers of the CAN controller. You can find more information - * in the header file linux/can/netlink.h. - */ -static int -can_update_sample_point(const struct can_bittiming_const *btc, - const unsigned int sample_point_nominal, const unsigned int tseg, - unsigned int *tseg1_ptr, unsigned int *tseg2_ptr, - unsigned int *sample_point_error_ptr) -{ - unsigned int sample_point_error, best_sample_point_error = UINT_MAX; - unsigned int sample_point, best_sample_point = 0; - unsigned int tseg1, tseg2; - int i; - - for (i = 0; i <= 1; i++) { - tseg2 = tseg + CAN_SYNC_SEG - - (sample_point_nominal * (tseg + CAN_SYNC_SEG)) / - 1000 - i; - tseg2 = clamp(tseg2, btc->tseg2_min, btc->tseg2_max); - tseg1 = tseg - tseg2; - if (tseg1 > btc->tseg1_max) { - tseg1 = btc->tseg1_max; - tseg2 = tseg - tseg1; - } - - sample_point = 1000 * (tseg + CAN_SYNC_SEG - tseg2) / - (tseg + CAN_SYNC_SEG); - sample_point_error = abs(sample_point_nominal - sample_point); - - if (sample_point <= sample_point_nominal && - sample_point_error < best_sample_point_error) { - best_sample_point = sample_point; - best_sample_point_error = sample_point_error; - *tseg1_ptr = tseg1; - *tseg2_ptr = tseg2; - } - } - - if (sample_point_error_ptr) - *sample_point_error_ptr = best_sample_point_error; - - return best_sample_point; -} - -int can_calc_bittiming(const struct net_device *dev, struct can_bittiming *bt, - const struct can_bittiming_const *btc) -{ - struct can_priv *priv = netdev_priv(dev); - unsigned int bitrate; /* current bitrate */ - unsigned int bitrate_error; /* difference between current and nominal value */ - unsigned int best_bitrate_error = UINT_MAX; - unsigned int sample_point_error; /* difference between current and nominal value */ - unsigned int best_sample_point_error = UINT_MAX; - unsigned int sample_point_nominal; /* nominal sample point */ - unsigned int best_tseg = 0; /* current best value for tseg */ - unsigned int best_brp = 0; /* current best value for brp */ - unsigned int brp, tsegall, tseg, tseg1 = 0, tseg2 = 0; - u64 v64; - - /* Use CiA recommended sample points */ - if (bt->sample_point) { - sample_point_nominal = bt->sample_point; - } else { - if (bt->bitrate > 800 * KILO /* BPS */) - sample_point_nominal = 750; - else if (bt->bitrate > 500 * KILO /* BPS */) - sample_point_nominal = 800; - else - sample_point_nominal = 875; - } - - /* tseg even = round down, odd = round up */ - for (tseg = (btc->tseg1_max + btc->tseg2_max) * 2 + 1; - tseg >= (btc->tseg1_min + btc->tseg2_min) * 2; tseg--) { - tsegall = CAN_SYNC_SEG + tseg / 2; - - /* Compute all possible tseg choices (tseg=tseg1+tseg2) */ - brp = priv->clock.freq / (tsegall * bt->bitrate) + tseg % 2; - - /* choose brp step which is possible in system */ - brp = (brp / btc->brp_inc) * btc->brp_inc; - if (brp < btc->brp_min || brp > btc->brp_max) - continue; - - bitrate = priv->clock.freq / (brp * tsegall); - bitrate_error = abs(bt->bitrate - bitrate); - - /* tseg brp biterror */ - if (bitrate_error > best_bitrate_error) - continue; - - /* reset sample point error if we have a better bitrate */ - if (bitrate_error < best_bitrate_error) - best_sample_point_error = UINT_MAX; - - can_update_sample_point(btc, sample_point_nominal, tseg / 2, - &tseg1, &tseg2, &sample_point_error); - if (sample_point_error >= best_sample_point_error) - continue; - - best_sample_point_error = sample_point_error; - best_bitrate_error = bitrate_error; - best_tseg = tseg / 2; - best_brp = brp; - - if (bitrate_error == 0 && sample_point_error == 0) - break; - } - - if (best_bitrate_error) { - /* Error in one-tenth of a percent */ - v64 = (u64)best_bitrate_error * 1000; - do_div(v64, bt->bitrate); - bitrate_error = (u32)v64; - if (bitrate_error > CAN_CALC_MAX_ERROR) { - netdev_err(dev, - "bitrate error %d.%d%% too high\n", - bitrate_error / 10, bitrate_error % 10); - return -EDOM; - } - netdev_warn(dev, "bitrate error %d.%d%%\n", - bitrate_error / 10, bitrate_error % 10); - } - - /* real sample point */ - bt->sample_point = can_update_sample_point(btc, sample_point_nominal, - best_tseg, &tseg1, &tseg2, - NULL); - - v64 = (u64)best_brp * 1000 * 1000 * 1000; - do_div(v64, priv->clock.freq); - bt->tq = (u32)v64; - bt->prop_seg = tseg1 / 2; - bt->phase_seg1 = tseg1 - bt->prop_seg; - bt->phase_seg2 = tseg2; - - /* check for sjw user settings */ - if (!bt->sjw || !btc->sjw_max) { - bt->sjw = 1; - } else { - /* bt->sjw is at least 1 -> sanitize upper bound to sjw_max */ - if (bt->sjw > btc->sjw_max) - bt->sjw = btc->sjw_max; - /* bt->sjw must not be higher than tseg2 */ - if (tseg2 < bt->sjw) - bt->sjw = tseg2; - } - - bt->brp = best_brp; - - /* real bitrate */ - bt->bitrate = priv->clock.freq / - (bt->brp * (CAN_SYNC_SEG + tseg1 + tseg2)); - - return 0; -} - -void can_calc_tdco(struct can_tdc *tdc, const struct can_tdc_const *tdc_const, - const struct can_bittiming *dbt, - u32 *ctrlmode, u32 ctrlmode_supported) - -{ - if (!tdc_const || !(ctrlmode_supported & CAN_CTRLMODE_TDC_AUTO)) - return; - - *ctrlmode &= ~CAN_CTRLMODE_TDC_MASK; - - /* As specified in ISO 11898-1 section 11.3.3 "Transmitter - * delay compensation" (TDC) is only applicable if data BRP is - * one or two. - */ - if (dbt->brp == 1 || dbt->brp == 2) { - /* Sample point in clock periods */ - u32 sample_point_in_tc = (CAN_SYNC_SEG + dbt->prop_seg + - dbt->phase_seg1) * dbt->brp; - - if (sample_point_in_tc < tdc_const->tdco_min) - return; - tdc->tdco = min(sample_point_in_tc, tdc_const->tdco_max); - *ctrlmode |= CAN_CTRLMODE_TDC_AUTO; - } -} -#endif /* CONFIG_CAN_CALC_BITTIMING */ - /* Checks the validity of the specified bit-timing parameters prop_seg, * phase_seg1, phase_seg2 and sjw and tries to determine the bitrate * prescaler value brp. You can find more information in the header diff --git a/drivers/net/can/dev/calc_bittiming.c b/drivers/net/can/dev/calc_bittiming.c new file mode 100644 index 000000000000..d3caa040614d --- /dev/null +++ b/drivers/net/can/dev/calc_bittiming.c @@ -0,0 +1,202 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Copyright (C) 2005 Marc Kleine-Budde, Pengutronix + * Copyright (C) 2006 Andrey Volkov, Varma Electronics + * Copyright (C) 2008-2009 Wolfgang Grandegger <wg@grandegger.com> + */ + +#include <linux/units.h> +#include <linux/can/dev.h> + +#define CAN_CALC_MAX_ERROR 50 /* in one-tenth of a percent */ + +/* Bit-timing calculation derived from: + * + * Code based on LinCAN sources and H8S2638 project + * Copyright 2004-2006 Pavel Pisa - DCE FELK CVUT cz + * Copyright 2005 Stanislav Marek + * email: pisa@cmp.felk.cvut.cz + * + * Calculates proper bit-timing parameters for a specified bit-rate + * and sample-point, which can then be used to set the bit-timing + * registers of the CAN controller. You can find more information + * in the header file linux/can/netlink.h. + */ +static int +can_update_sample_point(const struct can_bittiming_const *btc, + const unsigned int sample_point_nominal, const unsigned int tseg, + unsigned int *tseg1_ptr, unsigned int *tseg2_ptr, + unsigned int *sample_point_error_ptr) +{ + unsigned int sample_point_error, best_sample_point_error = UINT_MAX; + unsigned int sample_point, best_sample_point = 0; + unsigned int tseg1, tseg2; + int i; + + for (i = 0; i <= 1; i++) { + tseg2 = tseg + CAN_SYNC_SEG - + (sample_point_nominal * (tseg + CAN_SYNC_SEG)) / + 1000 - i; + tseg2 = clamp(tseg2, btc->tseg2_min, btc->tseg2_max); + tseg1 = tseg - tseg2; + if (tseg1 > btc->tseg1_max) { + tseg1 = btc->tseg1_max; + tseg2 = tseg - tseg1; + } + + sample_point = 1000 * (tseg + CAN_SYNC_SEG - tseg2) / + (tseg + CAN_SYNC_SEG); + sample_point_error = abs(sample_point_nominal - sample_point); + + if (sample_point <= sample_point_nominal && + sample_point_error < best_sample_point_error) { + best_sample_point = sample_point; + best_sample_point_error = sample_point_error; + *tseg1_ptr = tseg1; + *tseg2_ptr = tseg2; + } + } + + if (sample_point_error_ptr) + *sample_point_error_ptr = best_sample_point_error; + + return best_sample_point; +} + +int can_calc_bittiming(const struct net_device *dev, struct can_bittiming *bt, + const struct can_bittiming_const *btc) +{ + struct can_priv *priv = netdev_priv(dev); + unsigned int bitrate; /* current bitrate */ + unsigned int bitrate_error; /* difference between current and nominal value */ + unsigned int best_bitrate_error = UINT_MAX; + unsigned int sample_point_error; /* difference between current and nominal value */ + unsigned int best_sample_point_error = UINT_MAX; + unsigned int sample_point_nominal; /* nominal sample point */ + unsigned int best_tseg = 0; /* current best value for tseg */ + unsigned int best_brp = 0; /* current best value for brp */ + unsigned int brp, tsegall, tseg, tseg1 = 0, tseg2 = 0; + u64 v64; + + /* Use CiA recommended sample points */ + if (bt->sample_point) { + sample_point_nominal = bt->sample_point; + } else { + if (bt->bitrate > 800 * KILO /* BPS */) + sample_point_nominal = 750; + else if (bt->bitrate > 500 * KILO /* BPS */) + sample_point_nominal = 800; + else + sample_point_nominal = 875; + } + + /* tseg even = round down, odd = round up */ + for (tseg = (btc->tseg1_max + btc->tseg2_max) * 2 + 1; + tseg >= (btc->tseg1_min + btc->tseg2_min) * 2; tseg--) { + tsegall = CAN_SYNC_SEG + tseg / 2; + + /* Compute all possible tseg choices (tseg=tseg1+tseg2) */ + brp = priv->clock.freq / (tsegall * bt->bitrate) + tseg % 2; + + /* choose brp step which is possible in system */ + brp = (brp / btc->brp_inc) * btc->brp_inc; + if (brp < btc->brp_min || brp > btc->brp_max) + continue; + + bitrate = priv->clock.freq / (brp * tsegall); + bitrate_error = abs(bt->bitrate - bitrate); + + /* tseg brp biterror */ + if (bitrate_error > best_bitrate_error) + continue; + + /* reset sample point error if we have a better bitrate */ + if (bitrate_error < best_bitrate_error) + best_sample_point_error = UINT_MAX; + + can_update_sample_point(btc, sample_point_nominal, tseg / 2, + &tseg1, &tseg2, &sample_point_error); + if (sample_point_error >= best_sample_point_error) + continue; + + best_sample_point_error = sample_point_error; + best_bitrate_error = bitrate_error; + best_tseg = tseg / 2; + best_brp = brp; + + if (bitrate_error == 0 && sample_point_error == 0) + break; + } + + if (best_bitrate_error) { + /* Error in one-tenth of a percent */ + v64 = (u64)best_bitrate_error * 1000; + do_div(v64, bt->bitrate); + bitrate_error = (u32)v64; + if (bitrate_error > CAN_CALC_MAX_ERROR) { + netdev_err(dev, + "bitrate error %d.%d%% too high\n", + bitrate_error / 10, bitrate_error % 10); + return -EDOM; + } + netdev_warn(dev, "bitrate error %d.%d%%\n", + bitrate_error / 10, bitrate_error % 10); + } + + /* real sample point */ + bt->sample_point = can_update_sample_point(btc, sample_point_nominal, + best_tseg, &tseg1, &tseg2, + NULL); + + v64 = (u64)best_brp * 1000 * 1000 * 1000; + do_div(v64, priv->clock.freq); + bt->tq = (u32)v64; + bt->prop_seg = tseg1 / 2; + bt->phase_seg1 = tseg1 - bt->prop_seg; + bt->phase_seg2 = tseg2; + + /* check for sjw user settings */ + if (!bt->sjw || !btc->sjw_max) { + bt->sjw = 1; + } else { + /* bt->sjw is at least 1 -> sanitize upper bound to sjw_max */ + if (bt->sjw > btc->sjw_max) + bt->sjw = btc->sjw_max; + /* bt->sjw must not be higher than tseg2 */ + if (tseg2 < bt->sjw) + bt->sjw = tseg2; + } + + bt->brp = best_brp; + + /* real bitrate */ + bt->bitrate = priv->clock.freq / + (bt->brp * (CAN_SYNC_SEG + tseg1 + tseg2)); + + return 0; +} + +void can_calc_tdco(struct can_tdc *tdc, const struct can_tdc_const *tdc_const, + const struct can_bittiming *dbt, + u32 *ctrlmode, u32 ctrlmode_supported) + +{ + if (!tdc_const || !(ctrlmode_supported & CAN_CTRLMODE_TDC_AUTO)) + return; + + *ctrlmode &= ~CAN_CTRLMODE_TDC_MASK; + + /* As specified in ISO 11898-1 section 11.3.3 "Transmitter + * delay compensation" (TDC) is only applicable if data BRP is + * one or two. + */ + if (dbt->brp == 1 || dbt->brp == 2) { + /* Sample point in clock periods */ + u32 sample_point_in_tc = (CAN_SYNC_SEG + dbt->prop_seg + + dbt->phase_seg1) * dbt->brp; + + if (sample_point_in_tc < tdc_const->tdco_min) + return; + tdc->tdco = min(sample_point_in_tc, tdc_const->tdco_max); + *ctrlmode |= CAN_CTRLMODE_TDC_AUTO; + } +} diff --git a/drivers/net/can/dev/dev.c b/drivers/net/can/dev/dev.c index 96c9d9db00cf..c1956b1e9faf 100644 --- a/drivers/net/can/dev/dev.c +++ b/drivers/net/can/dev/dev.c @@ -4,7 +4,6 @@ * Copyright (C) 2008-2009 Wolfgang Grandegger <wg@grandegger.com> */ -#include <linux/module.h> #include <linux/kernel.h> #include <linux/slab.h> #include <linux/netdevice.h> @@ -17,12 +16,6 @@ #include <linux/gpio/consumer.h> #include <linux/of.h> -#define MOD_DESC "CAN device driver interface" - -MODULE_DESCRIPTION(MOD_DESC); -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>"); - static void can_update_state_error_stats(struct net_device *dev, enum can_state new_state) { @@ -329,6 +322,56 @@ int can_change_mtu(struct net_device *dev, int new_mtu) } EXPORT_SYMBOL_GPL(can_change_mtu); +/* generic implementation of netdev_ops::ndo_eth_ioctl for CAN devices + * supporting hardware timestamps + */ +int can_eth_ioctl_hwts(struct net_device *netdev, struct ifreq *ifr, int cmd) +{ + struct hwtstamp_config hwts_cfg = { 0 }; + + switch (cmd) { + case SIOCSHWTSTAMP: /* set */ + if (copy_from_user(&hwts_cfg, ifr->ifr_data, sizeof(hwts_cfg))) + return -EFAULT; + if (hwts_cfg.tx_type == HWTSTAMP_TX_ON && + hwts_cfg.rx_filter == HWTSTAMP_FILTER_ALL) + return 0; + return -ERANGE; + + case SIOCGHWTSTAMP: /* get */ + hwts_cfg.tx_type = HWTSTAMP_TX_ON; + hwts_cfg.rx_filter = HWTSTAMP_FILTER_ALL; + if (copy_to_user(ifr->ifr_data, &hwts_cfg, sizeof(hwts_cfg))) + return -EFAULT; + return 0; + + default: + return -EOPNOTSUPP; + } +} +EXPORT_SYMBOL(can_eth_ioctl_hwts); + +/* generic implementation of ethtool_ops::get_ts_info for CAN devices + * supporting hardware timestamps + */ +int can_ethtool_op_get_ts_info_hwts(struct net_device *dev, + struct ethtool_ts_info *info) +{ + info->so_timestamping = + SOF_TIMESTAMPING_TX_SOFTWARE | + SOF_TIMESTAMPING_RX_SOFTWARE | + SOF_TIMESTAMPING_SOFTWARE | + SOF_TIMESTAMPING_TX_HARDWARE | + SOF_TIMESTAMPING_RX_HARDWARE | + SOF_TIMESTAMPING_RAW_HARDWARE; + info->phc_index = -1; + info->tx_types = BIT(HWTSTAMP_TX_ON); + info->rx_filters = BIT(HWTSTAMP_FILTER_ALL); + + return 0; +} +EXPORT_SYMBOL(can_ethtool_op_get_ts_info_hwts); + /* Common open function when the device gets opened. * * This function should be called in the open function of the device @@ -513,7 +556,7 @@ static __init int can_dev_init(void) err = can_netlink_register(); if (!err) - pr_info(MOD_DESC "\n"); + pr_info("CAN device driver interface\n"); return err; } diff --git a/drivers/net/can/dev/netlink.c b/drivers/net/can/dev/netlink.c index 7633d98e3912..8efa22d9f214 100644 --- a/drivers/net/can/dev/netlink.c +++ b/drivers/net/can/dev/netlink.c @@ -176,7 +176,8 @@ static int can_changelink(struct net_device *dev, struct nlattr *tb[], * directly via do_set_bitrate(). Bail out if neither * is given. */ - if (!priv->bittiming_const && !priv->do_set_bittiming) + if (!priv->bittiming_const && !priv->do_set_bittiming && + !priv->bitrate_const) return -EOPNOTSUPP; memcpy(&bt, nla_data(data[IFLA_CAN_BITTIMING]), sizeof(bt)); @@ -278,7 +279,8 @@ static int can_changelink(struct net_device *dev, struct nlattr *tb[], * directly via do_set_bitrate(). Bail out if neither * is given. */ - if (!priv->data_bittiming_const && !priv->do_set_data_bittiming) + if (!priv->data_bittiming_const && !priv->do_set_data_bittiming && + !priv->data_bitrate_const) return -EOPNOTSUPP; memcpy(&dbt, nla_data(data[IFLA_CAN_DATA_BITTIMING]), @@ -509,7 +511,8 @@ static int can_fill_info(struct sk_buff *skb, const struct net_device *dev) if (priv->do_get_state) priv->do_get_state(dev, &state); - if ((priv->bittiming.bitrate && + if ((priv->bittiming.bitrate != CAN_BITRATE_UNSET && + priv->bittiming.bitrate != CAN_BITRATE_UNKNOWN && nla_put(skb, IFLA_CAN_BITTIMING, sizeof(priv->bittiming), &priv->bittiming)) || diff --git a/drivers/net/can/dev/skb.c b/drivers/net/can/dev/skb.c index 61660248c69e..07e0feac8629 100644 --- a/drivers/net/can/dev/skb.c +++ b/drivers/net/can/dev/skb.c @@ -5,6 +5,14 @@ */ #include <linux/can/dev.h> +#include <linux/can/netlink.h> +#include <linux/module.h> + +#define MOD_DESC "CAN device driver interface" + +MODULE_DESCRIPTION(MOD_DESC); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>"); /* Local echo of CAN messages * @@ -64,6 +72,9 @@ int can_put_echo_skb(struct sk_buff *skb, struct net_device *dev, /* save frame_len to reuse it when transmission is completed */ can_skb_prv(skb)->frame_len = frame_len; + if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) + skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; + skb_tx_timestamp(skb); /* save this skb for tx interrupt echo handling */ @@ -99,6 +110,9 @@ __can_get_echo_skb(struct net_device *dev, unsigned int idx, u8 *len_ptr, struct can_skb_priv *can_skb_priv = can_skb_prv(skb); struct canfd_frame *cf = (struct canfd_frame *)skb->data; + if (skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS) + skb_tstamp_tx(skb, skb_hwtstamps(skb)); + /* get the real payload length for netdev statistics */ if (cf->can_id & CAN_RTR_FLAG) *len_ptr = 0; @@ -252,3 +266,67 @@ struct sk_buff *alloc_can_err_skb(struct net_device *dev, struct can_frame **cf) return skb; } EXPORT_SYMBOL_GPL(alloc_can_err_skb); + +/* Check for outgoing skbs that have not been created by the CAN subsystem */ +static bool can_skb_headroom_valid(struct net_device *dev, struct sk_buff *skb) +{ + /* af_packet creates a headroom of HH_DATA_MOD bytes which is fine */ + if (WARN_ON_ONCE(skb_headroom(skb) < sizeof(struct can_skb_priv))) + return false; + + /* af_packet does not apply CAN skb specific settings */ + if (skb->ip_summed == CHECKSUM_NONE) { + /* init headroom */ + can_skb_prv(skb)->ifindex = dev->ifindex; + can_skb_prv(skb)->skbcnt = 0; + + skb->ip_summed = CHECKSUM_UNNECESSARY; + + /* perform proper loopback on capable devices */ + if (dev->flags & IFF_ECHO) + skb->pkt_type = PACKET_LOOPBACK; + else + skb->pkt_type = PACKET_HOST; + + skb_reset_mac_header(skb); + skb_reset_network_header(skb); + skb_reset_transport_header(skb); + } + + return true; +} + +/* Drop a given socketbuffer if it does not contain a valid CAN frame. */ +bool can_dropped_invalid_skb(struct net_device *dev, struct sk_buff *skb) +{ + const struct canfd_frame *cfd = (struct canfd_frame *)skb->data; + struct can_priv *priv = netdev_priv(dev); + + if (skb->protocol == htons(ETH_P_CAN)) { + if (unlikely(skb->len != CAN_MTU || + cfd->len > CAN_MAX_DLEN)) + goto inval_skb; + } else if (skb->protocol == htons(ETH_P_CANFD)) { + if (unlikely(skb->len != CANFD_MTU || + cfd->len > CANFD_MAX_DLEN)) + goto inval_skb; + } else { + goto inval_skb; + } + + if (!can_skb_headroom_valid(dev, skb)) { + goto inval_skb; + } else if (priv->ctrlmode & CAN_CTRLMODE_LISTENONLY) { + netdev_info_once(dev, + "interface in listen only mode, dropping skb\n"); + goto inval_skb; + } + + return false; + +inval_skb: + kfree_skb(skb); + dev->stats.tx_dropped++; + return true; +} +EXPORT_SYMBOL_GPL(can_dropped_invalid_skb); |