diff options
Diffstat (limited to 'drivers/gpu/drm/msm/dp/dp_drm.c')
| -rw-r--r-- | drivers/gpu/drm/msm/dp/dp_drm.c | 173 |
1 files changed, 169 insertions, 4 deletions
diff --git a/drivers/gpu/drm/msm/dp/dp_drm.c b/drivers/gpu/drm/msm/dp/dp_drm.c index 275370f21115..785d76639497 100644 --- a/drivers/gpu/drm/msm/dp/dp_drm.c +++ b/drivers/gpu/drm/msm/dp/dp_drm.c @@ -94,9 +94,9 @@ static const struct drm_bridge_funcs dp_bridge_ops = { .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, .atomic_reset = drm_atomic_helper_bridge_reset, - .enable = dp_bridge_enable, - .disable = dp_bridge_disable, - .post_disable = dp_bridge_post_disable, + .atomic_enable = dp_bridge_atomic_enable, + .atomic_disable = dp_bridge_atomic_disable, + .atomic_post_disable = dp_bridge_atomic_post_disable, .mode_set = dp_bridge_mode_set, .mode_valid = dp_bridge_mode_valid, .get_modes = dp_bridge_get_modes, @@ -107,6 +107,171 @@ static const struct drm_bridge_funcs dp_bridge_ops = { .hpd_notify = dp_bridge_hpd_notify, }; +static int edp_bridge_atomic_check(struct drm_bridge *drm_bridge, + struct drm_bridge_state *bridge_state, + struct drm_crtc_state *crtc_state, + struct drm_connector_state *conn_state) +{ + struct msm_dp *dp = to_dp_bridge(drm_bridge)->dp_display; + + if (WARN_ON(!conn_state)) + return -ENODEV; + + conn_state->self_refresh_aware = dp->psr_supported; + + if (!conn_state->crtc || !crtc_state) + return 0; + + if (crtc_state->self_refresh_active && !dp->psr_supported) + return -EINVAL; + + return 0; +} + +static void edp_bridge_atomic_enable(struct drm_bridge *drm_bridge, + struct drm_bridge_state *old_bridge_state) +{ + struct drm_atomic_state *atomic_state = old_bridge_state->base.state; + struct drm_crtc *crtc; + struct drm_crtc_state *old_crtc_state; + struct msm_dp_bridge *dp_bridge = to_dp_bridge(drm_bridge); + struct msm_dp *dp = dp_bridge->dp_display; + + /* + * Check the old state of the crtc to determine if the panel + * was put into psr state previously by the edp_bridge_atomic_disable. + * If the panel is in psr, just exit psr state and skip the full + * bridge enable sequence. + */ + crtc = drm_atomic_get_new_crtc_for_encoder(atomic_state, + drm_bridge->encoder); + if (!crtc) + return; + + old_crtc_state = drm_atomic_get_old_crtc_state(atomic_state, crtc); + + if (old_crtc_state && old_crtc_state->self_refresh_active) { + dp_display_set_psr(dp, false); + return; + } + + dp_bridge_atomic_enable(drm_bridge, old_bridge_state); +} + +static void edp_bridge_atomic_disable(struct drm_bridge *drm_bridge, + struct drm_bridge_state *old_bridge_state) +{ + struct drm_atomic_state *atomic_state = old_bridge_state->base.state; + struct drm_crtc *crtc; + struct drm_crtc_state *new_crtc_state = NULL, *old_crtc_state = NULL; + struct msm_dp_bridge *dp_bridge = to_dp_bridge(drm_bridge); + struct msm_dp *dp = dp_bridge->dp_display; + + crtc = drm_atomic_get_old_crtc_for_encoder(atomic_state, + drm_bridge->encoder); + if (!crtc) + goto out; + + new_crtc_state = drm_atomic_get_new_crtc_state(atomic_state, crtc); + if (!new_crtc_state) + goto out; + + old_crtc_state = drm_atomic_get_old_crtc_state(atomic_state, crtc); + if (!old_crtc_state) + goto out; + + /* + * Set self refresh mode if current crtc state is active. + * + * If old crtc state is active, then this is a display disable + * call while the sink is in psr state. So, exit psr here. + * The eDP controller will be disabled in the + * edp_bridge_atomic_post_disable function. + * + * We observed sink is stuck in self refresh if psr exit is skipped + * when display disable occurs while the sink is in psr state. + */ + if (new_crtc_state->self_refresh_active) { + dp_display_set_psr(dp, true); + return; + } else if (old_crtc_state->self_refresh_active) { + dp_display_set_psr(dp, false); + return; + } + +out: + dp_bridge_atomic_disable(drm_bridge, old_bridge_state); +} + +static void edp_bridge_atomic_post_disable(struct drm_bridge *drm_bridge, + struct drm_bridge_state *old_bridge_state) +{ + struct drm_atomic_state *atomic_state = old_bridge_state->base.state; + struct drm_crtc *crtc; + struct drm_crtc_state *new_crtc_state = NULL; + + crtc = drm_atomic_get_old_crtc_for_encoder(atomic_state, + drm_bridge->encoder); + if (!crtc) + return; + + new_crtc_state = drm_atomic_get_new_crtc_state(atomic_state, crtc); + if (!new_crtc_state) + return; + + /* + * Self refresh mode is already set in edp_bridge_atomic_disable. + */ + if (new_crtc_state->self_refresh_active) + return; + + dp_bridge_atomic_post_disable(drm_bridge, old_bridge_state); +} + +/** + * edp_bridge_mode_valid - callback to determine if specified mode is valid + * @bridge: Pointer to drm bridge structure + * @info: display info + * @mode: Pointer to drm mode structure + * Returns: Validity status for specified mode + */ +static enum drm_mode_status edp_bridge_mode_valid(struct drm_bridge *bridge, + const struct drm_display_info *info, + const struct drm_display_mode *mode) +{ + struct msm_dp *dp; + int mode_pclk_khz = mode->clock; + + dp = to_dp_bridge(bridge)->dp_display; + + if (!dp || !mode_pclk_khz || !dp->connector) { + DRM_ERROR("invalid params\n"); + return -EINVAL; + } + + if (mode->clock > DP_MAX_PIXEL_CLK_KHZ) + return MODE_CLOCK_HIGH; + + /* + * The eDP controller currently does not have a reliable way of + * enabling panel power to read sink capabilities. So, we rely + * on the panel driver to populate only supported modes for now. + */ + return MODE_OK; +} + +static const struct drm_bridge_funcs edp_bridge_ops = { + .atomic_enable = edp_bridge_atomic_enable, + .atomic_disable = edp_bridge_atomic_disable, + .atomic_post_disable = edp_bridge_atomic_post_disable, + .mode_set = dp_bridge_mode_set, + .mode_valid = edp_bridge_mode_valid, + .atomic_reset = drm_atomic_helper_bridge_reset, + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, + .atomic_check = edp_bridge_atomic_check, +}; + struct drm_bridge *dp_bridge_init(struct msm_dp *dp_display, struct drm_device *dev, struct drm_encoder *encoder) { @@ -121,7 +286,7 @@ struct drm_bridge *dp_bridge_init(struct msm_dp *dp_display, struct drm_device * dp_bridge->dp_display = dp_display; bridge = &dp_bridge->bridge; - bridge->funcs = &dp_bridge_ops; + bridge->funcs = dp_display->is_edp ? &edp_bridge_ops : &dp_bridge_ops; bridge->type = dp_display->connector_type; /* |