diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_dp.c')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_dp.c | 59 |
1 files changed, 48 insertions, 11 deletions
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index b5ec48913b47..c06a62a405b6 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -746,6 +746,22 @@ intel_dp_connector_unregister(struct intel_connector *intel_connector) } static void +hsw_dp_set_ddi_pll_sel(struct intel_crtc_config *pipe_config, int link_bw) +{ + switch (link_bw) { + case DP_LINK_BW_1_62: + pipe_config->ddi_pll_sel = PORT_CLK_SEL_LCPLL_810; + break; + case DP_LINK_BW_2_7: + pipe_config->ddi_pll_sel = PORT_CLK_SEL_LCPLL_1350; + break; + case DP_LINK_BW_5_4: + pipe_config->ddi_pll_sel = PORT_CLK_SEL_LCPLL_2700; + break; + } +} + +static void intel_dp_set_clock(struct intel_encoder *encoder, struct intel_crtc_config *pipe_config, int link_bw) { @@ -756,8 +772,6 @@ intel_dp_set_clock(struct intel_encoder *encoder, if (IS_G4X(dev)) { divisor = gen4_dpll; count = ARRAY_SIZE(gen4_dpll); - } else if (IS_HASWELL(dev)) { - /* Haswell has special-purpose DP DDI clocks. */ } else if (HAS_PCH_SPLIT(dev)) { divisor = pch_dpll; count = ARRAY_SIZE(pch_dpll); @@ -928,7 +942,10 @@ found: &pipe_config->dp_m2_n2); } - intel_dp_set_clock(encoder, pipe_config, intel_dp->link_bw); + if (HAS_DDI(dev)) + hsw_dp_set_ddi_pll_sel(pipe_config, intel_dp->link_bw); + else + intel_dp_set_clock(encoder, pipe_config, intel_dp->link_bw); return true; } @@ -1316,8 +1333,6 @@ void intel_edp_panel_off(struct intel_dp *intel_dp) DRM_DEBUG_KMS("Turn eDP power off\n"); - edp_wait_backlight_off(intel_dp); - WARN(!intel_dp->want_panel_vdd, "Need VDD to turn off panel\n"); pp = ironlake_get_pp_control(intel_dp); @@ -1353,6 +1368,9 @@ void intel_edp_backlight_on(struct intel_dp *intel_dp) return; DRM_DEBUG_KMS("\n"); + + intel_panel_enable_backlight(intel_dp->attached_connector); + /* * If we enable the backlight right away following a panel power * on, we may see slight flicker as the panel syncs with the eDP @@ -1367,8 +1385,6 @@ void intel_edp_backlight_on(struct intel_dp *intel_dp) I915_WRITE(pp_ctrl_reg, pp); POSTING_READ(pp_ctrl_reg); - - intel_panel_enable_backlight(intel_dp->attached_connector); } void intel_edp_backlight_off(struct intel_dp *intel_dp) @@ -1381,8 +1397,6 @@ void intel_edp_backlight_off(struct intel_dp *intel_dp) if (!is_edp(intel_dp)) return; - intel_panel_disable_backlight(intel_dp->attached_connector); - DRM_DEBUG_KMS("\n"); pp = ironlake_get_pp_control(intel_dp); pp &= ~EDP_BLC_ENABLE; @@ -1392,6 +1406,10 @@ void intel_edp_backlight_off(struct intel_dp *intel_dp) I915_WRITE(pp_ctrl_reg, pp); POSTING_READ(pp_ctrl_reg); intel_dp->last_backlight_off = jiffies; + + edp_wait_backlight_off(intel_dp); + + intel_panel_disable_backlight(intel_dp->attached_connector); } static void ironlake_edp_pll_on(struct intel_dp *intel_dp) @@ -1751,7 +1769,7 @@ static bool intel_edp_psr_match_conditions(struct intel_dp *intel_dp) struct drm_i915_private *dev_priv = dev->dev_private; struct drm_crtc *crtc = dig_port->base.base.crtc; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - struct drm_i915_gem_object *obj = to_intel_framebuffer(crtc->primary->fb)->obj; + struct drm_i915_gem_object *obj = intel_fb_obj(crtc->primary->fb); struct intel_encoder *intel_encoder = &dp_to_dig_port(intel_dp)->base; dev_priv->psr.source_ok = false; @@ -1784,7 +1802,6 @@ static bool intel_edp_psr_match_conditions(struct intel_dp *intel_dp) return false; } - obj = to_intel_framebuffer(crtc->primary->fb)->obj; if (obj->tiling_mode != I915_TILING_X || obj->fence_reg == I915_FENCE_REG_NONE) { DRM_DEBUG_KMS("PSR condition failed: fb not tiled or fenced\n"); @@ -3815,6 +3832,22 @@ intel_dp_hot_plug(struct intel_encoder *intel_encoder) intel_dp_check_link_status(intel_dp); } +bool +intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd) +{ + struct intel_dp *intel_dp = &intel_dig_port->dp; + + if (long_hpd) + return true; + + /* + * we'll check the link status via the normal hot plug path later - + * but for short hpds we should check it now + */ + intel_dp_check_link_status(intel_dp); + return false; +} + /* Return which DP Port should be selected for Transcoder DP control */ int intel_trans_dp_port_sel(struct drm_crtc *crtc) @@ -4387,6 +4420,7 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port, void intel_dp_init(struct drm_device *dev, int output_reg, enum port port) { + struct drm_i915_private *dev_priv = dev->dev_private; struct intel_digital_port *intel_dig_port; struct intel_encoder *intel_encoder; struct drm_encoder *encoder; @@ -4443,6 +4477,9 @@ intel_dp_init(struct drm_device *dev, int output_reg, enum port port) intel_encoder->cloneable = 0; intel_encoder->hot_plug = intel_dp_hot_plug; + intel_dig_port->hpd_pulse = intel_dp_hpd_pulse; + dev_priv->hpd_irq_port[port] = intel_dig_port; + if (!intel_dp_init_connector(intel_dig_port, intel_connector)) { drm_encoder_cleanup(encoder); kfree(intel_dig_port); |