3 files changed, 31 insertions, 22 deletions
diff --git a/arch/x86/entry/calling.h b/arch/x86/entry/calling.h
index 45a63e00a6af..3f48f695d5e6 100644
--- a/arch/x86/entry/calling.h
+++ b/arch/x86/entry/calling.h
@@ -198,8 +198,11 @@ For 32-bit we have the following conventions - kernel is built with
  * PAGE_TABLE_ISOLATION PGDs are 8k.  Flip bit 12 to switch between the two
  * halves:
  */
-#define PTI_SWITCH_PGTABLES_MASK	(1<<PAGE_SHIFT)
-#define PTI_SWITCH_MASK		(PTI_SWITCH_PGTABLES_MASK|(1<<X86_CR3_PTI_SWITCH_BIT))
+#define PTI_USER_PGTABLE_BIT		PAGE_SHIFT
+#define PTI_USER_PGTABLE_MASK		(1 << PTI_USER_PGTABLE_BIT)
+#define PTI_USER_PCID_BIT		X86_CR3_PTI_PCID_USER_BIT
+#define PTI_USER_PCID_MASK		(1 << PTI_USER_PCID_BIT)
+#define PTI_USER_PGTABLE_AND_PCID_MASK  (PTI_USER_PCID_MASK | PTI_USER_PGTABLE_MASK)
 
 .macro SET_NOFLUSH_BIT	reg:req
 	bts	$X86_CR3_PCID_NOFLUSH_BIT, \reg
@@ -208,7 +211,7 @@ For 32-bit we have the following conventions - kernel is built with
 .macro ADJUST_KERNEL_CR3 reg:req
 	ALTERNATIVE "", "SET_NOFLUSH_BIT \reg", X86_FEATURE_PCID
 	/* Clear PCID and "PAGE_TABLE_ISOLATION bit", point CR3 at kernel pagetables: */
-	andq    $(~PTI_SWITCH_MASK), \reg
+	andq    $(~PTI_USER_PGTABLE_AND_PCID_MASK), \reg
 .endm
 
 .macro SWITCH_TO_KERNEL_CR3 scratch_reg:req
@@ -239,15 +242,19 @@ For 32-bit we have the following conventions - kernel is built with
 	/* Flush needed, clear the bit */
 	btr	\scratch_reg, THIS_CPU_user_pcid_flush_mask
 	movq	\scratch_reg2, \scratch_reg
-	jmp	.Lwrcr3_\@
+	jmp	.Lwrcr3_pcid_\@
 
 .Lnoflush_\@:
 	movq	\scratch_reg2, \scratch_reg
 	SET_NOFLUSH_BIT \scratch_reg
 
+.Lwrcr3_pcid_\@:
+	/* Flip the ASID to the user version */
+	orq	$(PTI_USER_PCID_MASK), \scratch_reg
+
 .Lwrcr3_\@:
-	/* Flip the PGD and ASID to the user version */
-	orq     $(PTI_SWITCH_MASK), \scratch_reg
+	/* Flip the PGD to the user version */
+	orq     $(PTI_USER_PGTABLE_MASK), \scratch_reg
 	mov	\scratch_reg, %cr3
 .Lend_\@:
 .endm
@@ -263,17 +270,12 @@ For 32-bit we have the following conventions - kernel is built with
 	movq	%cr3, \scratch_reg
 	movq	\scratch_reg, \save_reg
 	/*
-	 * Is the "switch mask" all zero?  That means that both of
-	 * these are zero:
-	 *
-	 *	1. The user/kernel PCID bit, and
-	 *	2. The user/kernel "bit" that points CR3 to the
-	 *	   bottom half of the 8k PGD
-	 *
-	 * That indicates a kernel CR3 value, not a user CR3.
+	 * Test the user pagetable bit. If set, then the user page tables
+	 * are active. If clear CR3 already has the kernel page table
+	 * active.
 	 */
-	testq	$(PTI_SWITCH_MASK), \scratch_reg
-	jz	.Ldone_\@
+	bt	$PTI_USER_PGTABLE_BIT, \scratch_reg
+	jnc	.Ldone_\@
 
 	ADJUST_KERNEL_CR3 \scratch_reg
 	movq	\scratch_reg, %cr3
@@ -290,7 +292,7 @@ For 32-bit we have the following conventions - kernel is built with
 	 * KERNEL pages can always resume with NOFLUSH as we do
 	 * explicit flushes.
 	 */
-	bt	$X86_CR3_PTI_SWITCH_BIT, \save_reg
+	bt	$PTI_USER_PGTABLE_BIT, \save_reg
 	jnc	.Lnoflush_\@
 
 	/*
diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index ace8f321a5a1..a1f28a54f23a 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -44,6 +44,7 @@
 #include <asm/asm.h>
 #include <asm/smap.h>
 #include <asm/frame.h>
+#include <asm/nospec-branch.h>
 
 	.section .entry.text, "ax"
 
@@ -290,7 +291,7 @@ ENTRY(ret_from_fork)
 
 	/* kernel thread */
 1:	movl	%edi, %eax
-	call	*%ebx
+	CALL_NOSPEC %ebx
 	/*
 	 * A kernel thread is allowed to return here after successfully
 	 * calling do_execve().  Exit to userspace to complete the execve()
@@ -919,7 +920,7 @@ common_exception:
 	movl	%ecx, %es
 	TRACE_IRQS_OFF
 	movl	%esp, %eax			# pt_regs pointer
-	call	*%edi
+	CALL_NOSPEC %edi
 	jmp	ret_from_exception
 END(common_exception)
 
diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index f048e384ff54..4f8e1d35a97c 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -37,6 +37,7 @@
 #include <asm/pgtable_types.h>
 #include <asm/export.h>
 #include <asm/frame.h>
+#include <asm/nospec-branch.h>
 #include <linux/err.h>
 
 #include "calling.h"
@@ -191,7 +192,7 @@ ENTRY(entry_SYSCALL_64_trampoline)
 	 */
 	pushq	%rdi
 	movq	$entry_SYSCALL_64_stage2, %rdi
-	jmp	*%rdi
+	JMP_NOSPEC %rdi
 END(entry_SYSCALL_64_trampoline)
 
 	.popsection
@@ -270,7 +271,12 @@ entry_SYSCALL_64_fastpath:
 	 * It might end up jumping to the slow path.  If it jumps, RAX
 	 * and all argument registers are clobbered.
 	 */
+#ifdef CONFIG_RETPOLINE
+	movq	sys_call_table(, %rax, 8), %rax
+	call	__x86_indirect_thunk_rax
+#else
 	call	*sys_call_table(, %rax, 8)
+#endif
 .Lentry_SYSCALL_64_after_fastpath_call:
 
 	movq	%rax, RAX(%rsp)
@@ -442,7 +448,7 @@ ENTRY(stub_ptregs_64)
 	jmp	entry_SYSCALL64_slow_path
 
 1:
-	jmp	*%rax				/* Called from C */
+	JMP_NOSPEC %rax				/* Called from C */
 END(stub_ptregs_64)
 
 .macro ptregs_stub func
@@ -521,7 +527,7 @@ ENTRY(ret_from_fork)
 1:
 	/* kernel thread */
 	movq	%r12, %rdi
-	call	*%rbx
+	CALL_NOSPEC %rbx
 	/*
 	 * A kernel thread is allowed to return here after successfully
 	 * calling do_execve().  Exit to userspace to complete the execve()