aboutsummaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi')
-rw-r--r--arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi409
1 files changed, 142 insertions, 267 deletions
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
index ca676e04687b..f2b48241d15c 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -339,7 +339,7 @@
&apps_rsc {
- pm8998-rpmh-regulators {
+ regulators-0 {
compatible = "qcom,pm8998-rpmh-regulators";
qcom,pmic-id = "a";
@@ -621,7 +621,7 @@
};
};
- pm8005-rpmh-regulators {
+ regulators-1 {
compatible = "qcom,pm8005-rpmh-regulators";
qcom,pmic-id = "c";
@@ -756,8 +756,8 @@ ap_ts_i2c: &i2c14 {
};
&ipa {
+ qcom,gsi-loader = "modem";
status = "okay";
- modem-init;
};
&lpasscc {
@@ -862,7 +862,7 @@ ap_ts_i2c: &i2c14 {
pinctrl-0 = <&qup_uart6_4pin>;
- bluetooth: wcn3990-bt {
+ bluetooth: bluetooth {
compatible = "qcom,wcn3990-bt";
vddio-supply = <&src_pp1800_s4a>;
vddxo-supply = <&pp1800_l7a_wcn3990>;
@@ -995,108 +995,73 @@ ap_ts_i2c: &i2c14 {
/* PINCTRL - additions to nodes defined in sdm845.dtsi */
&qspi_cs0 {
- pinconf {
- pins = "gpio90";
- bias-disable;
- };
+ bias-disable;
};
&qspi_clk {
- pinconf {
- pins = "gpio95";
- bias-disable;
- };
+ bias-disable;
};
&qspi_data01 {
- pinconf {
- pins = "gpio91", "gpio92";
-
- /* High-Z when no transfers; nice to park the lines */
- bias-pull-up;
- };
+ /* High-Z when no transfers; nice to park the lines */
+ bias-pull-up;
};
&qup_i2c3_default {
- pinconf {
- pins = "gpio41", "gpio42";
- drive-strength = <2>;
+ drive-strength = <2>;
- /* Has external pullup */
- bias-disable;
- };
+ /* Has external pullup */
+ bias-disable;
};
&qup_i2c11_default {
- pinconf {
- pins = "gpio31", "gpio32";
- drive-strength = <2>;
+ drive-strength = <2>;
- /* Has external pullup */
- bias-disable;
- };
+ /* Has external pullup */
+ bias-disable;
};
&qup_i2c12_default {
- pinconf {
- pins = "gpio49", "gpio50";
- drive-strength = <2>;
+ drive-strength = <2>;
- /* Has external pullup */
- bias-disable;
- };
+ /* Has external pullup */
+ bias-disable;
};
&qup_i2c14_default {
- pinconf {
- pins = "gpio33", "gpio34";
- drive-strength = <2>;
+ drive-strength = <2>;
- /* Has external pullup */
- bias-disable;
- };
+ /* Has external pullup */
+ bias-disable;
};
&qup_spi0_default {
- pinconf {
- pins = "gpio0", "gpio1", "gpio2", "gpio3";
- drive-strength = <2>;
- bias-disable;
- };
+ drive-strength = <2>;
+ bias-disable;
};
&qup_spi5_default {
- pinconf {
- pins = "gpio85", "gpio86", "gpio87", "gpio88";
- drive-strength = <2>;
- bias-disable;
- };
+ drive-strength = <2>;
+ bias-disable;
};
&qup_spi10_default {
- pinconf {
- pins = "gpio53", "gpio54", "gpio55", "gpio56";
- drive-strength = <2>;
- bias-disable;
- };
+ drive-strength = <2>;
+ bias-disable;
};
-&qup_uart9_default {
- pinconf-tx {
- pins = "gpio4";
- drive-strength = <2>;
- bias-disable;
- };
+&qup_uart9_rx {
+ drive-strength = <2>;
+ bias-pull-up;
+};
- pinconf-rx {
- pins = "gpio5";
- drive-strength = <2>;
- bias-pull-up;
- };
+&qup_uart9_tx {
+ drive-strength = <2>;
+ bias-disable;
};
/* PINCTRL - board-specific pinctrl */
-&pm8005_gpio {
+&pm8005_gpios {
gpio-line-names = "",
"",
"SLB",
@@ -1130,7 +1095,7 @@ ap_ts_i2c: &i2c14 {
};
};
-&pm8998_gpio {
+&pm8998_gpios {
gpio-line-names = "",
"",
"SW_CTRL",
@@ -1180,243 +1145,153 @@ ap_ts_i2c: &i2c14 {
output-low;
};
- ap_edp_bklten: ap-edp-bklten {
- pinmux {
- pins = "gpio37";
- function = "gpio";
- };
-
- pinconf {
- pins = "gpio37";
- drive-strength = <2>;
- bias-disable;
- };
+ ap_edp_bklten: ap-edp-bklten-state {
+ pins = "gpio37";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
};
- bios_flash_wp_r_l: bios-flash-wp-r-l {
- pinmux {
- pins = "gpio128";
- function = "gpio";
- input-enable;
- };
-
- pinconf {
- pins = "gpio128";
- bias-disable;
- };
+ bios_flash_wp_r_l: bios-flash-wp-r-l-state {
+ pins = "gpio128";
+ function = "gpio";
+ input-enable;
+ bias-disable;
};
- ec_ap_int_l: ec-ap-int-l {
- pinmux {
- pins = "gpio122";
- function = "gpio";
- input-enable;
- };
-
- pinconf {
- pins = "gpio122";
- bias-pull-up;
- };
+ ec_ap_int_l: ec-ap-int-l-state {
+ pins = "gpio122";
+ function = "gpio";
+ input-enable;
+ bias-pull-up;
};
- edp_brij_en: edp-brij-en {
- pinmux {
- pins = "gpio102";
- function = "gpio";
- };
-
- pinconf {
- pins = "gpio102";
- drive-strength = <2>;
- bias-disable;
- };
+ edp_brij_en: edp-brij-en-state {
+ pins = "gpio102";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
};
- edp_brij_irq: edp-brij-irq {
- pinmux {
- pins = "gpio10";
- function = "gpio";
- };
-
- pinconf {
- pins = "gpio10";
- drive-strength = <2>;
- bias-pull-down;
- };
+ edp_brij_irq: edp-brij-irq-state {
+ pins = "gpio10";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
};
- en_pp3300_dx_edp: en-pp3300-dx-edp {
- pinmux {
- pins = "gpio43";
- function = "gpio";
- };
-
- pinconf {
- pins = "gpio43";
- drive-strength = <2>;
- bias-disable;
- };
+ en_pp3300_dx_edp: en-pp3300-dx-edp-state {
+ pins = "gpio43";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
};
- h1_ap_int_odl: h1-ap-int-odl {
- pinmux {
- pins = "gpio129";
- function = "gpio";
- input-enable;
- };
-
- pinconf {
- pins = "gpio129";
- bias-pull-up;
- };
+ h1_ap_int_odl: h1-ap-int-odl-state {
+ pins = "gpio129";
+ function = "gpio";
+ input-enable;
+ bias-pull-up;
};
- pen_eject_odl: pen-eject-odl {
- pinmux {
- pins = "gpio119";
- function = "gpio";
- bias-pull-up;
- };
+ pen_eject_odl: pen-eject-odl-state {
+ pins = "gpio119";
+ function = "gpio";
+ bias-pull-up;
};
- pen_irq_l: pen-irq-l {
- pinmux {
- pins = "gpio24";
- function = "gpio";
- };
+ pen_irq_l: pen-irq-l-state {
+ pins = "gpio24";
+ function = "gpio";
- pinconf {
- pins = "gpio24";
-
- /* Has external pullup */
- bias-disable;
- };
+ /* Has external pullup */
+ bias-disable;
};
- pen_pdct_l: pen-pdct-l {
- pinmux {
- pins = "gpio63";
- function = "gpio";
- };
-
- pinconf {
- pins = "gpio63";
+ pen_pdct_l: pen-pdct-l-state {
+ pins = "gpio63";
+ function = "gpio";
- /* Has external pullup */
- bias-disable;
- };
+ /* Has external pullup */
+ bias-disable;
};
- pen_rst_l: pen-rst-l {
- pinmux {
- pins = "gpio23";
- function = "gpio";
- };
-
- pinconf {
- pins = "gpio23";
- bias-disable;
- drive-strength = <2>;
+ pen_rst_l: pen-rst-l-state {
+ pins = "gpio23";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <2>;
- /*
- * The pen driver doesn't currently support
- * driving this reset line. By specifying
- * output-high here we're relying on the fact
- * that this pin has a default pulldown at boot
- * (which makes sure the pen was in reset if it
- * was powered) and then we set it high here to
- * take it out of reset. Better would be if the
- * pen driver could control this and we could
- * remove "output-high" here.
- */
- output-high;
- };
+ /*
+ * The pen driver doesn't currently support
+ * driving this reset line. By specifying
+ * output-high here we're relying on the fact
+ * that this pin has a default pulldown at boot
+ * (which makes sure the pen was in reset if it
+ * was powered) and then we set it high here to
+ * take it out of reset. Better would be if the
+ * pen driver could control this and we could
+ * remove "output-high" here.
+ */
+ output-high;
};
- sdc2_clk: sdc2-clk {
- pinconf {
- pins = "sdc2_clk";
- bias-disable;
+ sdc2_clk: sdc2-clk-state {
+ pins = "sdc2_clk";
+ bias-disable;
- /*
- * It seems that mmc_test reports errors if drive
- * strength is not 16.
- */
- drive-strength = <16>;
- };
+ /*
+ * It seems that mmc_test reports errors if drive
+ * strength is not 16.
+ */
+ drive-strength = <16>;
};
- sdc2_cmd: sdc2-cmd {
- pinconf {
- pins = "sdc2_cmd";
- bias-pull-up;
- drive-strength = <16>;
- };
+ sdc2_cmd: sdc2-cmd-state {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <16>;
};
- sdc2_data: sdc2-data {
- pinconf {
- pins = "sdc2_data";
- bias-pull-up;
- drive-strength = <16>;
- };
+ sdc2_data: sdc2-data-state {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <16>;
};
- sd_cd_odl: sd-cd-odl {
- pinmux {
- pins = "gpio44";
- function = "gpio";
- };
-
- pinconf {
- pins = "gpio44";
- bias-pull-up;
- };
+ sd_cd_odl: sd-cd-odl-state {
+ pins = "gpio44";
+ function = "gpio";
+ bias-pull-up;
};
- ts_int_l: ts-int-l {
- pinmux {
- pins = "gpio125";
- function = "gpio";
- };
-
- pinconf {
- pins = "gpio125";
- bias-pull-up;
- };
+ ts_int_l: ts-int-l-state {
+ pins = "gpio125";
+ function = "gpio";
+ bias-pull-up;
};
- ts_reset_l: ts-reset-l {
- pinmux {
- pins = "gpio118";
- function = "gpio";
- };
-
- pinconf {
- pins = "gpio118";
- bias-disable;
- drive-strength = <2>;
- };
+ ts_reset_l: ts-reset-l-state {
+ pins = "gpio118";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <2>;
};
- ap_suspend_l_assert: ap_suspend_l_assert {
- config {
- pins = "gpio126";
- function = "gpio";
- bias-disable;
- drive-strength = <2>;
- output-low;
- };
+ ap_suspend_l_assert: ap-suspend-l-assert-state {
+ pins = "gpio126";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <2>;
+ output-low;
};
- ap_suspend_l_deassert: ap_suspend_l_deassert {
- config {
- pins = "gpio126";
- function = "gpio";
- bias-disable;
- drive-strength = <2>;
- output-high;
- };
+ ap_suspend_l_deassert: ap-suspend-l-deassert-state {
+ pins = "gpio126";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <2>;
+ output-high;
};
};
Powered by cgit, Gruvboxed by Blaster4385.