diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 55 |
1 files changed, 28 insertions, 27 deletions
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 70b8731029c4..6b6e3ee950e5 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -155,7 +155,7 @@ }; thermal-zones { - ddr-controller { + ddr-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 0>; @@ -175,7 +175,7 @@ }; }; - core-cluster { + core-cluster-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 1>; @@ -674,7 +674,7 @@ }; pcie_ep1: pcie-ep@3400000 { - compatible = "fsl,ls1028a-pcie-ep","fsl,ls-pcie-ep"; + compatible = "fsl,ls1028a-pcie-ep"; reg = <0x00 0x03400000 0x0 0x00100000 0x80 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space"; @@ -713,7 +713,7 @@ }; pcie_ep2: pcie-ep@3500000 { - compatible = "fsl,ls1028a-pcie-ep","fsl,ls-pcie-ep"; + compatible = "fsl,ls1028a-pcie-ep"; reg = <0x00 0x03500000 0x0 0x00100000 0x88 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space"; @@ -828,6 +828,7 @@ <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "qdma-error", "qdma-queue0", "qdma-queue1", "qdma-queue2", "qdma-queue3"; + #dma-cells = <1>; dma-channels = <8>; block-number = <1>; block-offset = <0x10000>; @@ -859,8 +860,8 @@ malidp0: display@f080000 { compatible = "arm,mali-dp500"; reg = <0x0 0xf080000 0x0 0x10000>; - interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, - <0 223 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "DE", "SE"; clocks = <&dpclk>, <&clockgen QORIQ_CLK_HWACCEL 2>, @@ -902,9 +903,9 @@ <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dma-names = "tx", "rx"; - dmas = <&edma0 1 4>, - <&edma0 1 3>; + dma-names = "rx", "tx"; + dmas = <&edma0 1 3>, + <&edma0 1 4>; fsl,sai-asynchronous; status = "disabled"; }; @@ -923,9 +924,9 @@ <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dma-names = "tx", "rx"; - dmas = <&edma0 1 6>, - <&edma0 1 5>; + dma-names = "rx", "tx"; + dmas = <&edma0 1 5>, + <&edma0 1 6>; fsl,sai-asynchronous; status = "disabled"; }; @@ -944,9 +945,9 @@ <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dma-names = "tx", "rx"; - dmas = <&edma0 1 8>, - <&edma0 1 7>; + dma-names = "rx", "tx"; + dmas = <&edma0 1 7>, + <&edma0 1 8>; fsl,sai-asynchronous; status = "disabled"; }; @@ -965,9 +966,9 @@ <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dma-names = "tx", "rx"; - dmas = <&edma0 1 10>, - <&edma0 1 9>; + dma-names = "rx", "tx"; + dmas = <&edma0 1 9>, + <&edma0 1 10>; fsl,sai-asynchronous; status = "disabled"; }; @@ -986,9 +987,9 @@ <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dma-names = "tx", "rx"; - dmas = <&edma0 1 12>, - <&edma0 1 11>; + dma-names = "rx", "tx"; + dmas = <&edma0 1 11>, + <&edma0 1 12>; fsl,sai-asynchronous; status = "disabled"; }; @@ -1007,9 +1008,9 @@ <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dma-names = "tx", "rx"; - dmas = <&edma0 1 14>, - <&edma0 1 13>; + dma-names = "rx", "tx"; + dmas = <&edma0 1 13>, + <&edma0 1 14>; fsl,sai-asynchronous; status = "disabled"; }; @@ -1024,7 +1025,7 @@ tmu: tmu@1f80000 { compatible = "fsl,qoriq-tmu"; reg = <0x0 0x1f80000 0x0 0x10000>; - interrupts = <0 23 0x4>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>; fsl,tmu-calibration = <0x00000000 0x00000024>, @@ -1325,7 +1326,7 @@ little-endian; }; - ftm_alarm0: timer@2800000 { + ftm_alarm0: rtc@2800000 { compatible = "fsl,ls1028a-ftm-alarm"; reg = <0x0 0x2800000 0x0 0x10000>; fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>; @@ -1333,7 +1334,7 @@ status = "disabled"; }; - ftm_alarm1: timer@2810000 { + ftm_alarm1: rtc@2810000 { compatible = "fsl,ls1028a-ftm-alarm"; reg = <0x0 0x2810000 0x0 0x10000>; fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>; |