1 files changed, 3 insertions, 374 deletions

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 98196285e80c..d3ebb74873f8 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -43,14 +43,14 @@ u8 cpu_mask;
  *-------------------------------------------------------------------------*/
 
 /**
- * _omap2xxx_clk_commit - commit clock parent/rate changes in hardware
+ * omap2xxx_clk_commit - commit clock parent/rate changes in hardware
  * @clk: struct clk *
  *
  * If @clk has the DELAYED_APP flag set, meaning that parent/rate changes
  * don't take effect until the VALID_CONFIG bit is written, write the
  * VALID_CONFIG bit and wait for the write to complete.  No return value.
  */
-static void _omap2xxx_clk_commit(struct clk *clk)
+void omap2xxx_clk_commit(struct clk *clk)
 {
 	if (!cpu_is_omap24xx())
 		return;
@@ -91,49 +91,6 @@ void omap2_init_clk_clkdm(struct clk *clk)
 }
 
 /**
- * omap2_init_clksel_parent - set a clksel clk's parent field from the hardware
- * @clk: OMAP clock struct ptr to use
- *
- * Given a pointer to a source-selectable struct clk, read the hardware
- * register and determine what its parent is currently set to.  Update the
- * clk->parent field with the appropriate clk ptr.
- */
-void omap2_init_clksel_parent(struct clk *clk)
-{
-	const struct clksel *clks;
-	const struct clksel_rate *clkr;
-	u32 r, found = 0;
-
-	if (!clk->clksel)
-		return;
-
-	r = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
-	r >>= __ffs(clk->clksel_mask);
-
-	for (clks = clk->clksel; clks->parent && !found; clks++) {
-		for (clkr = clks->rates; clkr->div && !found; clkr++) {
-			if ((clkr->flags & cpu_mask) && (clkr->val == r)) {
-				if (clk->parent != clks->parent) {
-					pr_debug("clock: inited %s parent "
-						 "to %s (was %s)\n",
-						 clk->name, clks->parent->name,
-						 ((clk->parent) ?
-						  clk->parent->name : "NULL"));
-					clk_reparent(clk, clks->parent);
-				};
-				found = 1;
-			}
-		}
-	}
-
-	if (!found)
-		printk(KERN_ERR "clock: init parent: could not find "
-		       "regval %0x for clock %s\n", r,  clk->name);
-
-	return;
-}
-
-/**
  * omap2_clk_dflt_find_companion - find companion clock to @clk
  * @clk: struct clk * to find the companion clock of
  * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
@@ -335,274 +292,6 @@ err:
 	return ret;
 }
 
-/*
- * Used for clocks that are part of CLKSEL_xyz governed clocks.
- * REVISIT: Maybe change to use clk->enable() functions like on omap1?
- */
-unsigned long omap2_clksel_recalc(struct clk *clk)
-{
-	unsigned long rate;
-	u32 div = 0;
-
-	pr_debug("clock: recalc'ing clksel clk %s\n", clk->name);
-
-	div = omap2_clksel_get_divisor(clk);
-	if (div == 0)
-		return clk->rate;
-
-	rate = clk->parent->rate / div;
-
-	pr_debug("clock: new clock rate is %ld (div %d)\n", rate, div);
-
-	return rate;
-}
-
-/**
- * omap2_get_clksel_by_parent - return clksel struct for a given clk & parent
- * @clk: OMAP struct clk ptr to inspect
- * @src_clk: OMAP struct clk ptr of the parent clk to search for
- *
- * Scan the struct clksel array associated with the clock to find
- * the element associated with the supplied parent clock address.
- * Returns a pointer to the struct clksel on success or NULL on error.
- */
-static const struct clksel *omap2_get_clksel_by_parent(struct clk *clk,
-						       struct clk *src_clk)
-{
-	const struct clksel *clks;
-
-	if (!clk->clksel)
-		return NULL;
-
-	for (clks = clk->clksel; clks->parent; clks++) {
-		if (clks->parent == src_clk)
-			break; /* Found the requested parent */
-	}
-
-	if (!clks->parent) {
-		printk(KERN_ERR "clock: Could not find parent clock %s in "
-		       "clksel array of clock %s\n", src_clk->name,
-		       clk->name);
-		return NULL;
-	}
-
-	return clks;
-}
-
-/**
- * omap2_clksel_round_rate_div - find divisor for the given clock and rate
- * @clk: OMAP struct clk to use
- * @target_rate: desired clock rate
- * @new_div: ptr to where we should store the divisor
- *
- * Finds 'best' divider value in an array based on the source and target
- * rates.  The divider array must be sorted with smallest divider first.
- * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT,
- * they are only settable as part of virtual_prcm set.
- *
- * Returns the rounded clock rate or returns 0xffffffff on error.
- */
-u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
-				u32 *new_div)
-{
-	unsigned long test_rate;
-	const struct clksel *clks;
-	const struct clksel_rate *clkr;
-	u32 last_div = 0;
-
-	pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n",
-		 clk->name, target_rate);
-
-	*new_div = 1;
-
-	clks = omap2_get_clksel_by_parent(clk, clk->parent);
-	if (!clks)
-		return ~0;
-
-	for (clkr = clks->rates; clkr->div; clkr++) {
-		if (!(clkr->flags & cpu_mask))
-		    continue;
-
-		/* Sanity check */
-		if (clkr->div <= last_div)
-			pr_err("clock: clksel_rate table not sorted "
-			       "for clock %s", clk->name);
-
-		last_div = clkr->div;
-
-		test_rate = clk->parent->rate / clkr->div;
-
-		if (test_rate <= target_rate)
-			break; /* found it */
-	}
-
-	if (!clkr->div) {
-		pr_err("clock: Could not find divisor for target "
-		       "rate %ld for clock %s parent %s\n", target_rate,
-		       clk->name, clk->parent->name);
-		return ~0;
-	}
-
-	*new_div = clkr->div;
-
-	pr_debug("clock: new_div = %d, new_rate = %ld\n", *new_div,
-		 (clk->parent->rate / clkr->div));
-
-	return (clk->parent->rate / clkr->div);
-}
-
-/**
- * omap2_clksel_round_rate - find rounded rate for the given clock and rate
- * @clk: OMAP struct clk to use
- * @target_rate: desired clock rate
- *
- * Compatibility wrapper for OMAP clock framework
- * Finds best target rate based on the source clock and possible dividers.
- * rates. The divider array must be sorted with smallest divider first.
- * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT,
- * they are only settable as part of virtual_prcm set.
- *
- * Returns the rounded clock rate or returns 0xffffffff on error.
- */
-long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate)
-{
-	u32 new_div;
-
-	return omap2_clksel_round_rate_div(clk, target_rate, &new_div);
-}
-
-
-/* Given a clock and a rate apply a clock specific rounding function */
-long omap2_clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	if (clk->round_rate)
-		return clk->round_rate(clk, rate);
-
-	if (clk->flags & RATE_FIXED)
-		printk(KERN_ERR "clock: generic omap2_clk_round_rate called "
-		       "on fixed-rate clock %s\n", clk->name);
-
-	return clk->rate;
-}
-
-/**
- * omap2_clksel_to_divisor() - turn clksel field value into integer divider
- * @clk: OMAP struct clk to use
- * @field_val: register field value to find
- *
- * Given a struct clk of a rate-selectable clksel clock, and a register field
- * value to search for, find the corresponding clock divisor.  The register
- * field value should be pre-masked and shifted down so the LSB is at bit 0
- * before calling.  Returns 0 on error
- */
-u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val)
-{
-	const struct clksel *clks;
-	const struct clksel_rate *clkr;
-
-	clks = omap2_get_clksel_by_parent(clk, clk->parent);
-	if (!clks)
-		return 0;
-
-	for (clkr = clks->rates; clkr->div; clkr++) {
-		if ((clkr->flags & cpu_mask) && (clkr->val == field_val))
-			break;
-	}
-
-	if (!clkr->div) {
-		printk(KERN_ERR "clock: Could not find fieldval %d for "
-		       "clock %s parent %s\n", field_val, clk->name,
-		       clk->parent->name);
-		return 0;
-	}
-
-	return clkr->div;
-}
-
-/**
- * omap2_divisor_to_clksel() - turn clksel integer divisor into a field value
- * @clk: OMAP struct clk to use
- * @div: integer divisor to search for
- *
- * Given a struct clk of a rate-selectable clksel clock, and a clock divisor,
- * find the corresponding register field value.  The return register value is
- * the value before left-shifting.  Returns ~0 on error
- */
-u32 omap2_divisor_to_clksel(struct clk *clk, u32 div)
-{
-	const struct clksel *clks;
-	const struct clksel_rate *clkr;
-
-	/* should never happen */
-	WARN_ON(div == 0);
-
-	clks = omap2_get_clksel_by_parent(clk, clk->parent);
-	if (!clks)
-		return ~0;
-
-	for (clkr = clks->rates; clkr->div; clkr++) {
-		if ((clkr->flags & cpu_mask) && (clkr->div == div))
-			break;
-	}
-
-	if (!clkr->div) {
-		printk(KERN_ERR "clock: Could not find divisor %d for "
-		       "clock %s parent %s\n", div, clk->name,
-		       clk->parent->name);
-		return ~0;
-	}
-
-	return clkr->val;
-}
-
-/**
- * omap2_clksel_get_divisor - get current divider applied to parent clock.
- * @clk: OMAP struct clk to use.
- *
- * Returns the integer divisor upon success or 0 on error.
- */
-u32 omap2_clksel_get_divisor(struct clk *clk)
-{
-	u32 v;
-
-	if (!clk->clksel_mask)
-		return 0;
-
-	v = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
-	v >>= __ffs(clk->clksel_mask);
-
-	return omap2_clksel_to_divisor(clk, v);
-}
-
-int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 v, field_val, validrate, new_div = 0;
-
-	if (!clk->clksel_mask)
-		return -EINVAL;
-
-	validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
-	if (validrate != rate)
-		return -EINVAL;
-
-	field_val = omap2_divisor_to_clksel(clk, new_div);
-	if (field_val == ~0)
-		return -EINVAL;
-
-	v = __raw_readl(clk->clksel_reg);
-	v &= ~clk->clksel_mask;
-	v |= field_val << __ffs(clk->clksel_mask);
-	__raw_writel(v, clk->clksel_reg);
-	v = __raw_readl(clk->clksel_reg); /* OCP barrier */
-
-	clk->rate = clk->parent->rate / new_div;
-
-	_omap2xxx_clk_commit(clk);
-
-	return 0;
-}
-
-
 /* Set the clock rate for a clock source */
 int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
 {
@@ -622,75 +311,15 @@ int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
 	return ret;
 }
 
-/*
- * Converts encoded control register address into a full address
- * On error, the return value (parent_div) will be 0.
- */
-static u32 _omap2_clksel_get_src_field(struct clk *src_clk, struct clk *clk,
-				       u32 *field_val)
-{
-	const struct clksel *clks;
-	const struct clksel_rate *clkr;
-
-	clks = omap2_get_clksel_by_parent(clk, src_clk);
-	if (!clks)
-		return 0;
-
-	for (clkr = clks->rates; clkr->div; clkr++) {
-		if (clkr->flags & cpu_mask && clkr->flags & DEFAULT_RATE)
-			break; /* Found the default rate for this platform */
-	}
-
-	if (!clkr->div) {
-		printk(KERN_ERR "clock: Could not find default rate for "
-		       "clock %s parent %s\n", clk->name,
-		       src_clk->parent->name);
-		return 0;
-	}
-
-	/* Should never happen.  Add a clksel mask to the struct clk. */
-	WARN_ON(clk->clksel_mask == 0);
-
-	*field_val = clkr->val;
-
-	return clkr->div;
-}
-
 int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
 {
-	u32 field_val, v, parent_div;
-
 	if (clk->flags & CONFIG_PARTICIPANT)
 		return -EINVAL;
 
 	if (!clk->clksel)
 		return -EINVAL;
 
-	parent_div = _omap2_clksel_get_src_field(new_parent, clk, &field_val);
-	if (!parent_div)
-		return -EINVAL;
-
-	/* Set new source value (previous dividers if any in effect) */
-	v = __raw_readl(clk->clksel_reg);
-	v &= ~clk->clksel_mask;
-	v |= field_val << __ffs(clk->clksel_mask);
-	__raw_writel(v, clk->clksel_reg);
-	v = __raw_readl(clk->clksel_reg);    /* OCP barrier */
-
-	_omap2xxx_clk_commit(clk);
-
-	clk_reparent(clk, new_parent);
-
-	/* CLKSEL clocks follow their parents' rates, divided by a divisor */
-	clk->rate = new_parent->rate;
-
-	if (parent_div > 0)
-		clk->rate /= parent_div;
-
-	pr_debug("clock: set parent of %s to %s (new rate %ld)\n",
-		 clk->name, clk->parent->name, clk->rate);
-
-	return 0;
+	return omap2_clksel_set_parent(clk, new_parent);
 }
 
 /*-------------------------------------------------------------------------