diff options
Diffstat (limited to 'Documentation')
3 files changed, 8 insertions, 5 deletions
diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt index 3363d9ae4e74..e61d00e25b95 100644 --- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt +++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt @@ -21,7 +21,8 @@ Its subnodes can be: RSTC Reset Controller required properties: - compatible: Should be "atmel,<chip>-rstc". - <chip> can be "at91sam9260" or "at91sam9g45" or "sama5d3" + <chip> can be "at91sam9260", "at91sam9g45", "sama5d3" or "samx7" + it also can be "microchip,sam9x60-rstc" - reg: Should contain registers location and length - clocks: phandle to input clock. diff --git a/Documentation/devicetree/bindings/power/supply/battery.txt b/Documentation/devicetree/bindings/power/supply/battery.txt index 89871ab8c704..5c913d4cf36c 100644 --- a/Documentation/devicetree/bindings/power/supply/battery.txt +++ b/Documentation/devicetree/bindings/power/supply/battery.txt @@ -16,6 +16,7 @@ Required Properties: Optional Properties: - voltage-min-design-microvolt: drained battery voltage + - voltage-max-design-microvolt: fully charged battery voltage - energy-full-design-microwatt-hours: battery design energy - charge-full-design-microamp-hours: battery design capacity - precharge-current-microamp: current for pre-charge phase @@ -48,6 +49,7 @@ Example: bat: battery { compatible = "simple-battery"; voltage-min-design-microvolt = <3200000>; + voltage-max-design-microvolt = <4200000>; energy-full-design-microwatt-hours = <5290000>; charge-full-design-microamp-hours = <1430000>; precharge-current-microamp = <256000>; diff --git a/Documentation/devicetree/bindings/power/supply/sc27xx-fg.txt b/Documentation/devicetree/bindings/power/supply/sc27xx-fg.txt index fc35ac577401..0a5705b8b592 100644 --- a/Documentation/devicetree/bindings/power/supply/sc27xx-fg.txt +++ b/Documentation/devicetree/bindings/power/supply/sc27xx-fg.txt @@ -9,8 +9,8 @@ Required properties: "sprd,sc2731-fgu". - reg: The address offset of fuel gauge unit. - battery-detect-gpios: GPIO for battery detection. -- io-channels: Specify the IIO ADC channel to get temperature. -- io-channel-names: Should be "bat-temp". +- io-channels: Specify the IIO ADC channels to get temperature and charge voltage. +- io-channel-names: Should be "bat-temp" or "charge-vol". - nvmem-cells: A phandle to the calibration cells provided by eFuse device. - nvmem-cell-names: Should be "fgu_calib". - monitored-battery: Phandle of battery characteristics devicetree node. @@ -47,8 +47,8 @@ Example: compatible = "sprd,sc2731-fgu"; reg = <0xa00>; battery-detect-gpios = <&pmic_eic 9 GPIO_ACTIVE_HIGH>; - io-channels = <&pmic_adc 5>; - io-channel-names = "bat-temp"; + io-channels = <&pmic_adc 5>, <&pmic_adc 14>; + io-channel-names = "bat-temp", "charge-vol"; nvmem-cells = <&fgu_calib>; nvmem-cell-names = "fgu_calib"; monitored-battery = <&bat>; |