diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
8 files changed, 155 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt b/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt new file mode 100644 index 000000000000..82caa7b65ae8 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt @@ -0,0 +1,20 @@ +Feiyang FY07024DI26A30-D 7" MIPI-DSI LCD Panel + +Required properties: +- compatible: must be "feiyang,fy07024di26a30d" +- reg: DSI virtual channel used by that screen +- avdd-supply: analog regulator dc1 switch +- dvdd-supply: 3v3 digital regulator +- reset-gpios: a GPIO phandle for the reset pin + +Optional properties: +- backlight: phandle for the backlight control. + +panel@0 { + compatible = "feiyang,fy07024di26a30d"; + reg = <0>; + avdd-supply = <®_dc1sw>; + dvdd-supply = <®_dldo2>; + reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */ + backlight = <&backlight>; +}; diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt index d0f55161579a..3ab8c7412cf6 100644 --- a/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt +++ b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt @@ -12,7 +12,7 @@ Optional properties: Example: &mipi_dsi { - panel { + panel@0 { compatible = "innolux,p079zca"; reg = <0>; power-supply = <...>; diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt index 595d9dfeffd3..d1cab3a8f0fb 100644 --- a/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt +++ b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt @@ -13,7 +13,7 @@ Optional properties: Example: &mipi_dsi { - panel { + panel@0 { compatible = "innolux,p079zca"; reg = <0>; avdd-supply = <...>; diff --git a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd097d04.txt b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd097d04.txt index 164a5fa236da..cfefff688614 100644 --- a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd097d04.txt +++ b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd097d04.txt @@ -12,7 +12,7 @@ Optional properties: Example: &mipi_dsi { - panel { + panel@0 { compatible = "kingdisplay,kd097d04"; reg = <0>; power-supply = <...>; diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt new file mode 100644 index 000000000000..1b5763200cf6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt @@ -0,0 +1,18 @@ +Rocktech jh057n00900 5.5" 720x1440 TFT LCD panel + +Required properties: +- compatible: should be "rocktech,jh057n00900" +- reg: DSI virtual channel of the peripheral +- reset-gpios: panel reset gpio +- backlight: phandle of the backlight device attached to the panel + +Example: + + &mipi_dsi { + panel@0 { + compatible = "rocktech,jh057n00900"; + reg = <0>; + backlight = <&backlight>; + reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.txt new file mode 100644 index 000000000000..d1ad31bca8d9 --- /dev/null +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.txt @@ -0,0 +1,72 @@ +Rockchip specific extensions for rk3066 HDMI +============================================ + +Required properties: +- compatible: + "rockchip,rk3066-hdmi"; +- reg: + Physical base address and length of the controller's registers. +- clocks, clock-names: + Phandle to HDMI controller clock, name should be "hclk". +- interrupts: + HDMI interrupt number. +- power-domains: + Phandle to the RK3066_PD_VIO power domain. +- rockchip,grf: + This soc uses GRF regs to switch the HDMI TX input between vop0 and vop1. +- ports: + Contains one port node with two endpoints, numbered 0 and 1, + connected respectively to vop0 and vop1. + Contains one port node with one endpoint + connected to a hdmi-connector node. +- pinctrl-0, pinctrl-name: + Switch the iomux for the HPD/I2C pins to HDMI function. + +Example: + hdmi: hdmi@10116000 { + compatible = "rockchip,rk3066-hdmi"; + reg = <0x10116000 0x2000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HDMI>; + clock-names = "hclk"; + power-domains = <&power RK3066_PD_VIO>; + rockchip,grf = <&grf>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmii2c_xfer>, <&hdmi_hpd>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + hdmi_in: port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + hdmi_in_vop0: endpoint@0 { + reg = <0>; + remote-endpoint = <&vop0_out_hdmi>; + }; + hdmi_in_vop1: endpoint@1 { + reg = <1>; + remote-endpoint = <&vop1_out_hdmi>; + }; + }; + hdmi_out: port@1 { + reg = <1>; + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; + }; + }; + }; + +&pinctrl { + hdmi { + hdmi_hpd: hdmi-hpd { + rockchip,pins = <0 RK_PA0 1 &pcfg_pull_default>; + }; + hdmii2c_xfer: hdmii2c-xfer { + rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>, + <0 RK_PA2 1 &pcfg_pull_none>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/gpu/aspeed-gfx.txt b/Documentation/devicetree/bindings/gpu/aspeed-gfx.txt new file mode 100644 index 000000000000..958bdf962339 --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/aspeed-gfx.txt @@ -0,0 +1,41 @@ +Device tree configuration for the GFX display device on the ASPEED SoCs + +Required properties: + - compatible + * Must be one of the following: + + aspeed,ast2500-gfx + + aspeed,ast2400-gfx + * In addition, the ASPEED pinctrl bindings require the 'syscon' property to + be present + + - reg: Physical base address and length of the GFX registers + + - interrupts: interrupt number for the GFX device + + - clocks: clock number used to generate the pixel clock + + - resets: reset line that must be released to use the GFX device + + - memory-region: + Phandle to a memory region to allocate from, as defined in + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt + + +Example: + +gfx: display@1e6e6000 { + compatible = "aspeed,ast2500-gfx", "syscon"; + reg = <0x1e6e6000 0x1000>; + reg-io-width = <4>; + clocks = <&syscon ASPEED_CLK_GATE_D1CLK>; + resets = <&syscon ASPEED_RESET_CRT1>; + interrupts = <0x19>; + memory-region = <&gfx_memory>; +}; + +gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; +}; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 5e6ea1f991d8..9506140167d6 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -345,6 +345,7 @@ ricoh Ricoh Co. Ltd. rikomagic Rikomagic Tech Corp. Ltd riscv RISC-V Foundation rockchip Fuzhou Rockchip Electronics Co., Ltd +rocktech ROCKTECH DISPLAYS LIMITED rohm ROHM Semiconductor Co., Ltd ronbo Ronbo Electronics roofull Shenzhen Roofull Technology Co, Ltd |