diff options
Diffstat (limited to 'Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt')
-rw-r--r-- | Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt | 38 |
1 files changed, 0 insertions, 38 deletions
diff --git a/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt b/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt deleted file mode 100644 index 8dc41ed99685..000000000000 --- a/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt +++ /dev/null @@ -1,38 +0,0 @@ -Intel IXP4xx XScale Networking Processors GPIO - -This GPIO controller is found in the Intel IXP4xx processors. -It supports 16 GPIO lines. - -The interrupt portions of the GPIO controller is hierarchical: -the synchronous edge detector is part of the GPIO block, but the -actual enabling/disabling of the interrupt line is done in the -main IXP4xx interrupt controller which has a 1:1 mapping for -the first 12 GPIO lines to 12 system interrupts. - -The remaining 4 GPIO lines can not be used for receiving -interrupts. - -The interrupt parent of this GPIO controller must be the -IXP4xx interrupt controller. - -Required properties: - -- compatible : Should be - "intel,ixp4xx-gpio" -- reg : Should contain registers location and length -- gpio-controller : marks this as a GPIO controller -- #gpio-cells : Should be 2, see gpio/gpio.txt -- interrupt-controller : marks this as an interrupt controller -- #interrupt-cells : a standard two-cell interrupt, see - interrupt-controller/interrupts.txt - -Example: - -gpio0: gpio@c8004000 { - compatible = "intel,ixp4xx-gpio"; - reg = <0xc8004000 0x1000>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; -}; |