diff options
Diffstat (limited to 'Documentation/devicetree/bindings/display/bridge')
10 files changed, 129 insertions, 74 deletions
diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml index f08a01dfedf3..5bbe81862c8f 100644 --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml @@ -117,23 +117,21 @@ properties: ports: description: - The ADV7511(W)/13 has two video ports and one audio port. This node - models their connections as documented in - Documentation/devicetree/bindings/media/video-interfaces.txt - Documentation/devicetree/bindings/graph.txt - type: object + The ADV7511(W)/13 has two video ports and one audio port. + $ref: /schemas/graph.yaml#/properties/ports + properties: port@0: description: Video port for the RGB or YUV input. - type: object + $ref: /schemas/graph.yaml#/properties/port port@1: description: Video port for the HDMI output. - type: object + $ref: /schemas/graph.yaml#/properties/port port@2: description: Audio port for the HDMI output. - type: object + $ref: /schemas/graph.yaml#/properties/port # adi,input-colorspace and adi,input-clock are required except in # "rgb 1x" and "yuv444 1x" modes, in which case they must not be diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml b/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml index f36209137c8a..987aa83c2649 100644 --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml @@ -91,25 +91,23 @@ properties: ports: description: - The ADV7533/35 has two video ports and one audio port. This node - models their connections as documented in - Documentation/devicetree/bindings/media/video-interfaces.txt - Documentation/devicetree/bindings/graph.txt - type: object + The ADV7533/35 has two video ports and one audio port. + $ref: /schemas/graph.yaml#/properties/ports + properties: port@0: description: Video port for the DSI input. The remote endpoint phandle should be a reference to a valid mipi_dsi_host_device. - type: object + $ref: /schemas/graph.yaml#/properties/port port@1: description: Video port for the HDMI output. - type: object + $ref: /schemas/graph.yaml#/properties/port port@2: description: Audio port for the HDMI output. - type: object + $ref: /schemas/graph.yaml#/properties/port required: - compatible diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml index bce96b5b0db0..4a5e5d9d6f90 100644 --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml @@ -8,7 +8,7 @@ title: Analogix ANX7814 SlimPort (Full-HD Transmitter) maintainers: - Andrzej Hajda <andrzej.hajda@intel.com> - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> - Robert Foss <robert.foss@linaro.org> properties: diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml index 2ebaa43eb62e..b19be0804abe 100644 --- a/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml +++ b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml @@ -25,7 +25,6 @@ properties: const: ldb reg: - minItems: 2 maxItems: 2 reg-names: diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml index c6e81f532215..1b2185be92cd 100644 --- a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml @@ -8,7 +8,7 @@ title: ITE it66121 HDMI bridge Device Tree Bindings maintainers: - Phong LE <ple@baylibre.com> - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> description: | The IT66121 is a high-performance and low-power single channel HDMI diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml index 3a8614e0f627..84aafcbf0919 100644 --- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml @@ -51,6 +51,7 @@ properties: properties: port@0: $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: | For LVDS encoders, port 0 is the parallel input For LVDS decoders, port 0 is the LVDS input diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml new file mode 100644 index 000000000000..c4bf54397473 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/nxp,tda998x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP TDA998x HDMI transmitter + +maintainers: + - Russell King <linux@armlinux.org.uk> + +properties: + compatible: + const: nxp,tda998x + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + video-ports: + default: 0x230145 + maximum: 0xffffff + description: + 24 bits value which defines how the video controller output is wired to + the TDA998x input. + + audio-ports: + description: + Array of 8-bit values, 2 values per DAI (Documentation/sound/soc/dai.rst). + The implementation allows one or two DAIs. + If two DAIs are defined, they must be of different type. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + minItems: 1 + items: + - description: | + The first value defines the DAI type: TDA998x_SPDIF or TDA998x_I2S + (see include/dt-bindings/display/tda998x.h). + - description: + The second value defines the tda998x AP_ENA reg content when the + DAI in question is used. + + '#sound-dai-cells': + enum: [ 0, 1 ] + + nxp,calib-gpios: + maxItems: 1 + description: + Calibration GPIO, which must correspond with the gpio used for the + TDA998x interrupt pin. + + port: + $ref: /schemas/graph.yaml#/properties/port + description: Parallel input port + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + type: object + description: Parallel input port + + port@1: + type: object + description: HDMI output port + +required: + - compatible + - reg + +oneOf: + - required: + - port + - required: + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/display/tda998x.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + tda998x: hdmi-encoder@70 { + compatible = "nxp,tda998x"; + reg = <0x70>; + interrupt-parent = <&gpio0>; + interrupts = <27 IRQ_TYPE_EDGE_FALLING>; + video-ports = <0x230145>; + + #sound-dai-cells = <1>; + /* DAI-format / AP_ENA reg value */ + audio-ports = <TDA998x_SPDIF 0x04>, + <TDA998x_I2S 0x03>; + + port { + tda998x_in: endpoint { + remote-endpoint = <&lcdc_0>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml index 0c9785c8db51..e3ec697f89e7 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml @@ -38,6 +38,9 @@ properties: clock-names: maxItems: 2 + resets: + maxItems: 1 + ports: $ref: /schemas/graph.yaml#/properties/ports @@ -67,6 +70,7 @@ required: - reg - clocks - clock-names + - resets - interrupts - ports @@ -85,6 +89,7 @@ examples: clocks = <&cpg CPG_CORE R8A7795_CLK_S0D4>, <&cpg CPG_MOD 729>; clock-names = "iahb", "isfr"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 729>; ports { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml index b00246faea57..4b7e54a8f037 100644 --- a/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml @@ -26,7 +26,6 @@ properties: reg-io-width: description: Width (in bytes) of the registers specified by the reg property. - $ref: /schemas/types.yaml#/definitions/uint32 enum: [1, 4] default: 1 diff --git a/Documentation/devicetree/bindings/display/bridge/tda998x.txt b/Documentation/devicetree/bindings/display/bridge/tda998x.txt deleted file mode 100644 index f5a02f61dd36..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/tda998x.txt +++ /dev/null @@ -1,54 +0,0 @@ -Device-Tree bindings for the NXP TDA998x HDMI transmitter - -Required properties; - - compatible: must be "nxp,tda998x" - - - reg: I2C address - -Required node: - - port: Input port node with endpoint definition, as described - in Documentation/devicetree/bindings/graph.txt - -Optional properties: - - interrupts: interrupt number and trigger type - default: polling - - - pinctrl-0: pin control group to be used for - screen plug/unplug interrupt. - - - pinctrl-names: must contain a "default" entry. - - - video-ports: 24 bits value which defines how the video controller - output is wired to the TDA998x input - default: <0x230145> - - - audio-ports: array of 8-bit values, 2 values per one DAI[1]. - The first value defines the DAI type: TDA998x_SPDIF or TDA998x_I2S[2]. - The second value defines the tda998x AP_ENA reg content when the DAI - in question is used. The implementation allows one or two DAIs. If two - DAIs are defined, they must be of different type. - - - nxp,calib-gpios: calibration GPIO, which must correspond with the - gpio used for the TDA998x interrupt pin. - -[1] Documentation/sound/soc/dai.rst -[2] include/dt-bindings/display/tda998x.h - -Example: - -#include <dt-bindings/display/tda998x.h> - - tda998x: hdmi-encoder { - compatible = "nxp,tda998x"; - reg = <0x70>; - interrupt-parent = <&gpio0>; - interrupts = <27 2>; /* falling edge */ - pinctrl-0 = <&pmx_camera>; - pinctrl-names = "default"; - video-ports = <0x230145>; - - #sound-dai-cells = <2>; - /* DAI-format AP_ENA reg value */ - audio-ports = < TDA998x_SPDIF 0x04 - TDA998x_I2S 0x03>; - - }; |