1 files changed, 0 insertions, 58 deletions
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt
deleted file mode 100644
index 6f8744fd301b..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* Rockchip RK3126/RK3128 Clock and Reset Unit
-
-The RK3126/RK3128 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3126-cru" or "rockchip,rk3128-cru"
-  "rockchip,rk3126-cru" - controller compatible with RK3126 SoC.
-  "rockchip,rk3128-cru" - controller compatible with RK3128 SoC.
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3128-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "ext_i2s" - external I2S clock - optional,
- - "gmac_clkin" - external GMAC clock - optional
-
-Example: Clock controller node:
-
-	cru: cru@20000000 {
-		compatible = "rockchip,rk3128-cru";
-		reg = <0x20000000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart2: serial@20068000 {
-		compatible = "rockchip,serial";
-		reg = <0x20068000 0x100>;
-		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-		clock-frequency = <24000000>;
-		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
-		clock-names = "sclk_uart", "pclk_uart";
-	};