diff options
| -rw-r--r-- | Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml | 30 |
1 files changed, 30 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml index d0ac31ab60cf..6f0290c4e291 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml @@ -50,6 +50,12 @@ description: | | Command or data | |<D7><D6><D5><D4><D3><D2><D1><D0>| + The standard defines one pixel format for type C: RGB111. The industry + however has decided to provide the type A/B interface pixel formats also on + the Type C interface and most common among these are RGB565 and RGB666. + The MIPI DCS command set_address_mode (36h) has one bit that controls RGB/BGR + order. This gives each supported RGB format a BGR variant. + The panel resolution is specified using the panel-timing node properties hactive (width) and vactive (height). The other mandatory panel-timing properties should be set to zero except clock-frequency which can be @@ -93,6 +99,28 @@ properties: spi-3wire: true + format: + description: > + Pixel format in bit order as going on the wire: + * `x2r1g1b1r1g1b1` - RGB111, 2 pixels per byte + * `x2b1g1r1b1g1r1` - BGR111, 2 pixels per byte + * `x1r1g1b1x1r1g1b1` - RGB111, 2 pixels per byte + * `x1b1g1r1x1b1g1r1` - BGR111, 2 pixels per byte + * `r5g6b5` - RGB565, 2 bytes + * `b5g6r5` - BGR565, 2 bytes + * `r6x2g6x2b6x2` - RGB666, 3 bytes + * `b6x2g6x2r6x2` - BGR666, 3 bytes + enum: + - x2r1g1b1r1g1b1 + - x2b1g1r1b1g1r1 + - x1r1g1b1x1r1g1b1 + - x1b1g1r1x1b1g1r1 + - r5g6b5 + - b5g6r5 + - r6x2g6x2b6x2 + - b6x2g6x2r6x2 + default: r5g6b5 + required: - compatible - reg @@ -119,6 +147,8 @@ examples: reset-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; write-only; + format = "r5g6b5"; + backlight = <&backlight>; width-mm = <35>; |