diff options
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/82571.c | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/netdev.c | 6 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igc/igc.h | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igc/igc_ethtool.c | 7 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igc/igc_main.c | 9 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igc/igc_ptp.c | 72 |
6 files changed, 61 insertions, 37 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c index 88faf05e23ba..0b1e890dd583 100644 --- a/drivers/net/ethernet/intel/e1000e/82571.c +++ b/drivers/net/ethernet/intel/e1000e/82571.c @@ -899,6 +899,8 @@ static s32 e1000_set_d0_lplu_state_82571(struct e1000_hw *hw, bool active) } else { data &= ~IGP02E1000_PM_D0_LPLU; ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data); + if (ret_val) + return ret_val; /* LPLU and SmartSpeed are mutually exclusive. LPLU is used * during Dx states where the power conservation is most * important. During driver activity we should enable diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index e9b82c209c2d..a0948002ddf8 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -5974,15 +5974,19 @@ static void e1000_reset_task(struct work_struct *work) struct e1000_adapter *adapter; adapter = container_of(work, struct e1000_adapter, reset_task); + rtnl_lock(); /* don't run the task if already down */ - if (test_bit(__E1000_DOWN, &adapter->state)) + if (test_bit(__E1000_DOWN, &adapter->state)) { + rtnl_unlock(); return; + } if (!(adapter->flags & FLAG_RESTART_NOW)) { e1000e_dump(adapter); e_err("Reset adapter unexpectedly\n"); } e1000e_reinit_locked(adapter); + rtnl_unlock(); } /** diff --git a/drivers/net/ethernet/intel/igc/igc.h b/drivers/net/ethernet/intel/igc/igc.h index 5d2809dfd06a..1b08a7dc7bc4 100644 --- a/drivers/net/ethernet/intel/igc/igc.h +++ b/drivers/net/ethernet/intel/igc/igc.h @@ -547,7 +547,7 @@ void igc_ptp_init(struct igc_adapter *adapter); void igc_ptp_reset(struct igc_adapter *adapter); void igc_ptp_suspend(struct igc_adapter *adapter); void igc_ptp_stop(struct igc_adapter *adapter); -void igc_ptp_rx_pktstamp(struct igc_q_vector *q_vector, void *va, +void igc_ptp_rx_pktstamp(struct igc_q_vector *q_vector, __le32 *va, struct sk_buff *skb); int igc_ptp_set_ts_config(struct net_device *netdev, struct ifreq *ifr); int igc_ptp_get_ts_config(struct net_device *netdev, struct ifreq *ifr); diff --git a/drivers/net/ethernet/intel/igc/igc_ethtool.c b/drivers/net/ethernet/intel/igc/igc_ethtool.c index 824a6c454bca..8722294ab90c 100644 --- a/drivers/net/ethernet/intel/igc/igc_ethtool.c +++ b/drivers/net/ethernet/intel/igc/igc_ethtool.c @@ -1711,6 +1711,9 @@ static int igc_ethtool_get_link_ksettings(struct net_device *netdev, Autoneg); } + /* Set pause flow control settings */ + ethtool_link_ksettings_add_link_mode(cmd, supported, Pause); + switch (hw->fc.requested_mode) { case igc_fc_full: ethtool_link_ksettings_add_link_mode(cmd, advertising, Pause); @@ -1725,9 +1728,7 @@ static int igc_ethtool_get_link_ksettings(struct net_device *netdev, Asym_Pause); break; default: - ethtool_link_ksettings_add_link_mode(cmd, advertising, Pause); - ethtool_link_ksettings_add_link_mode(cmd, advertising, - Asym_Pause); + break; } status = pm_runtime_suspended(&adapter->pdev->dev) ? diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c index 7ac9597ddb84..4d989ebc9713 100644 --- a/drivers/net/ethernet/intel/igc/igc_main.c +++ b/drivers/net/ethernet/intel/igc/igc_main.c @@ -3831,10 +3831,19 @@ static void igc_reset_task(struct work_struct *work) adapter = container_of(work, struct igc_adapter, reset_task); + rtnl_lock(); + /* If we're already down or resetting, just bail */ + if (test_bit(__IGC_DOWN, &adapter->state) || + test_bit(__IGC_RESETTING, &adapter->state)) { + rtnl_unlock(); + return; + } + igc_rings_dump(adapter); igc_regs_dump(adapter); netdev_err(adapter->netdev, "Reset adapter\n"); igc_reinit_locked(adapter); + rtnl_unlock(); } /** diff --git a/drivers/net/ethernet/intel/igc/igc_ptp.c b/drivers/net/ethernet/intel/igc/igc_ptp.c index ac0b9c85da7c..545f4d0e67cf 100644 --- a/drivers/net/ethernet/intel/igc/igc_ptp.c +++ b/drivers/net/ethernet/intel/igc/igc_ptp.c @@ -152,46 +152,54 @@ static void igc_ptp_systim_to_hwtstamp(struct igc_adapter *adapter, } /** - * igc_ptp_rx_pktstamp - retrieve Rx per packet timestamp + * igc_ptp_rx_pktstamp - Retrieve timestamp from Rx packet buffer * @q_vector: Pointer to interrupt specific structure * @va: Pointer to address containing Rx buffer * @skb: Buffer containing timestamp and packet * - * This function is meant to retrieve the first timestamp from the - * first buffer of an incoming frame. The value is stored in little - * endian format starting on byte 0. There's a second timestamp - * starting on byte 8. - **/ -void igc_ptp_rx_pktstamp(struct igc_q_vector *q_vector, void *va, + * This function retrieves the timestamp saved in the beginning of packet + * buffer. While two timestamps are available, one in timer0 reference and the + * other in timer1 reference, this function considers only the timestamp in + * timer0 reference. + */ +void igc_ptp_rx_pktstamp(struct igc_q_vector *q_vector, __le32 *va, struct sk_buff *skb) { struct igc_adapter *adapter = q_vector->adapter; - __le64 *regval = (__le64 *)va; - int adjust = 0; - - /* The timestamp is recorded in little endian format. - * DWORD: | 0 | 1 | 2 | 3 - * Field: | Timer0 Low | Timer0 High | Timer1 Low | Timer1 High + u64 regval; + int adjust; + + /* Timestamps are saved in little endian at the beginning of the packet + * buffer following the layout: + * + * DWORD: | 0 | 1 | 2 | 3 | + * Field: | Timer1 SYSTIML | Timer1 SYSTIMH | Timer0 SYSTIML | Timer0 SYSTIMH | + * + * SYSTIML holds the nanoseconds part while SYSTIMH holds the seconds + * part of the timestamp. */ - igc_ptp_systim_to_hwtstamp(adapter, skb_hwtstamps(skb), - le64_to_cpu(regval[0])); - - /* adjust timestamp for the RX latency based on link speed */ - if (adapter->hw.mac.type == igc_i225) { - switch (adapter->link_speed) { - case SPEED_10: - adjust = IGC_I225_RX_LATENCY_10; - break; - case SPEED_100: - adjust = IGC_I225_RX_LATENCY_100; - break; - case SPEED_1000: - adjust = IGC_I225_RX_LATENCY_1000; - break; - case SPEED_2500: - adjust = IGC_I225_RX_LATENCY_2500; - break; - } + regval = le32_to_cpu(va[2]); + regval |= (u64)le32_to_cpu(va[3]) << 32; + igc_ptp_systim_to_hwtstamp(adapter, skb_hwtstamps(skb), regval); + + /* Adjust timestamp for the RX latency based on link speed */ + switch (adapter->link_speed) { + case SPEED_10: + adjust = IGC_I225_RX_LATENCY_10; + break; + case SPEED_100: + adjust = IGC_I225_RX_LATENCY_100; + break; + case SPEED_1000: + adjust = IGC_I225_RX_LATENCY_1000; + break; + case SPEED_2500: + adjust = IGC_I225_RX_LATENCY_2500; + break; + default: + adjust = 0; + netdev_warn_once(adapter->netdev, "Imprecise timestamp\n"); + break; } skb_hwtstamps(skb)->hwtstamp = ktime_sub_ns(skb_hwtstamps(skb)->hwtstamp, adjust); |