diff options
4 files changed, 1112 insertions, 0 deletions
diff --git a/tools/testing/selftests/drivers/net/mlxsw/egress_vid_classification.sh b/tools/testing/selftests/drivers/net/mlxsw/egress_vid_classification.sh new file mode 100755 index 000000000000..0cf9e47e3209 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/egress_vid_classification.sh @@ -0,0 +1,273 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test VLAN classification after routing and verify that the order of +# configuration does not impact switch behavior. Verify that {RIF, Port}->VID +# mapping is added correctly for existing {Port, VID}->FID mapping and that +# {RIF, Port}->VID mapping is added correctly for new {Port, VID}->FID mapping. + +# +-------------------+ +--------------------+ +# | H1 | | H2 | +# | | | | +# | $h1.10 + | | + $h2.10 | +# | 192.0.2.1/28 | | | | 192.0.2.3/28 | +# | | | | | | +# | $h1 + | | + $h2 | +# +----------------|--+ +--|-----------------+ +# | | +# +----------------|-------------------------|-----------------+ +# | SW | | | +# | +--------------|-------------------------|---------------+ | +# | | $swp1 + + $swp2 | | +# | | | | | | +# | | $swp1.10 + + $swp2.10 | | +# | | | | +# | | br0 | | +# | | 192.0.2.2/28 | | +# | +--------------------------------------------------------+ | +# | | +# | $swp3.20 + | +# | 192.0.2.17/28 | | +# | | | +# | $swp3 + | +# +---------------|--------------------------------------------+ +# | +# +---------------|--+ +# | $h3 + | +# | | | +# | $h3.20 + | +# | 192.0.2.18/28 | +# | | +# | H3 | +# +------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + port_vid_map_rif + rif_port_vid_map +" + +NUM_NETIFS=6 +source $lib_dir/lib.sh +source $lib_dir/tc_common.sh +source $lib_dir/devlink_lib.sh + +h1_create() +{ + simple_if_init $h1 + vlan_create $h1 10 v$h1 192.0.2.1/28 + + ip route add 192.0.2.16/28 vrf v$h1 nexthop via 192.0.2.2 +} + +h1_destroy() +{ + ip route del 192.0.2.16/28 vrf v$h1 nexthop via 192.0.2.2 + + vlan_destroy $h1 10 + simple_if_fini $h1 +} + +h2_create() +{ + simple_if_init $h2 + vlan_create $h2 10 v$h2 192.0.2.3/28 +} + +h2_destroy() +{ + vlan_destroy $h2 10 + simple_if_fini $h2 +} + +h3_create() +{ + simple_if_init $h3 + vlan_create $h3 20 v$h3 192.0.2.18/28 + + ip route add 192.0.2.0/28 vrf v$h3 nexthop via 192.0.2.17 +} + +h3_destroy() +{ + ip route del 192.0.2.0/28 vrf v$h3 nexthop via 192.0.2.17 + + vlan_destroy $h3 20 + simple_if_fini $h3 +} + +switch_create() +{ + ip link set dev $swp1 up + tc qdisc add dev $swp1 clsact + + ip link add dev br0 type bridge mcast_snooping 0 + + # By default, a link-local address is generated when netdevice becomes + # up. Adding an address to the bridge will cause creating a RIF for it. + # Prevent generating link-local address to be able to control when the + # RIF is added. + sysctl_set net.ipv6.conf.br0.addr_gen_mode 1 + ip link set dev br0 up + + ip link set dev $swp2 up + vlan_create $swp2 10 + ip link set dev $swp2.10 master br0 + + ip link set dev $swp3 up + vlan_create $swp3 20 "" 192.0.2.17/28 + + # Replace neighbor to avoid 1 packet which is forwarded in software due + # to "unresolved neigh". + ip neigh replace dev $swp3.20 192.0.2.18 lladdr $(mac_get $h3.20) +} + +switch_destroy() +{ + vlan_destroy $swp3 20 + ip link set dev $swp3 down + + ip link set dev $swp2.10 nomaster + vlan_destroy $swp2 10 + ip link set dev $swp2 down + + ip link set dev br0 down + sysctl_restore net.ipv6.conf.br0.addr_gen_mode + ip link del dev br0 + + tc qdisc del dev $swp1 clsact + ip link set dev $swp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + swp3=${NETIFS[p5]} + h3=${NETIFS[p6]} + + vrf_prepare + forwarding_enable + + h1_create + h2_create + h3_create + + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + + h3_destroy + h2_destroy + h1_destroy + + forwarding_restore + vrf_cleanup +} + +bridge_rif_add() +{ + rifs_occ_t0=$(devlink_resource_occ_get rifs) + __addr_add_del br0 add 192.0.2.2/28 + rifs_occ_t1=$(devlink_resource_occ_get rifs) + + expected_rifs=$((rifs_occ_t0 + 1)) + + [[ $expected_rifs -eq $rifs_occ_t1 ]] + check_err $? "Expected $expected_rifs RIFs, $rifs_occ_t1 are used" + + sleep 1 +} + +bridge_rif_del() +{ + __addr_add_del br0 del 192.0.2.2/28 +} + +port_vid_map_rif() +{ + RET=0 + + # First add {port, VID}->FID for swp1.10, then add a RIF and verify that + # packets get the correct VID after routing. + vlan_create $swp1 10 + ip link set dev $swp1.10 master br0 + bridge_rif_add + + # Replace neighbor to avoid 1 packet which is forwarded in software due + # to "unresolved neigh". + ip neigh replace dev br0 192.0.2.1 lladdr $(mac_get $h1.10) + + # The hardware matches on the first ethertype which is not VLAN, + # so the protocol should be IP. + tc filter add dev $swp1 egress protocol ip pref 1 handle 101 \ + flower skip_sw dst_ip 192.0.2.1 action pass + + ping_do $h1.10 192.0.2.18 + check_err $? "Ping failed" + + tc_check_at_least_x_packets "dev $swp1 egress" 101 10 + check_err $? "Packets were not routed in hardware" + + log_test "Add RIF for existing {port, VID}->FID mapping" + + tc filter del dev $swp1 egress + + bridge_rif_del + ip link set dev $swp1.10 nomaster + vlan_destroy $swp1 10 +} + +rif_port_vid_map() +{ + RET=0 + + # First add an address to the bridge, which will create a RIF on top of + # it, then add a new {port, VID}->FID mapping and verify that packets + # get the correct VID after routing. + bridge_rif_add + vlan_create $swp1 10 + ip link set dev $swp1.10 master br0 + + # Replace neighbor to avoid 1 packet which is forwarded in software due + # to "unresolved neigh". + ip neigh replace dev br0 192.0.2.1 lladdr $(mac_get $h1.10) + + # The hardware matches on the first ethertype which is not VLAN, + # so the protocol should be IP. + tc filter add dev $swp1 egress protocol ip pref 1 handle 101 \ + flower skip_sw dst_ip 192.0.2.1 action pass + + ping_do $h1.10 192.0.2.18 + check_err $? "Ping failed" + + tc_check_at_least_x_packets "dev $swp1 egress" 101 10 + check_err $? "Packets were not routed in hardware" + + log_test "Add {port, VID}->FID mapping for FID with a RIF" + + tc filter del dev $swp1 egress + + ip link set dev $swp1.10 nomaster + vlan_destroy $swp1 10 + bridge_rif_del +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/ingress_rif_conf_1d.sh b/tools/testing/selftests/drivers/net/mlxsw/ingress_rif_conf_1d.sh new file mode 100755 index 000000000000..df2b09966886 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/ingress_rif_conf_1d.sh @@ -0,0 +1,264 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test routing over bridge and verify that the order of configuration does not +# impact switch behavior. Verify that RIF is added correctly for existing +# mappings and that new mappings use the correct RIF. + +# +-------------------+ +--------------------+ +# | H1 | | H2 | +# | | | | +# | $h1.10 + | | + $h2.10 | +# | 192.0.2.1/28 | | | | 192.0.2.3/28 | +# | | | | | | +# | $h1 + | | + $h2 | +# +----------------|--+ +--|-----------------+ +# | | +# +----------------|-------------------------|-----------------+ +# | SW | | | +# | +--------------|-------------------------|---------------+ | +# | | $swp1 + + $swp2 | | +# | | | | | | +# | | $swp1.10 + + $swp2.10 | | +# | | | | +# | | br0 | | +# | | 192.0.2.2/28 | | +# | +--------------------------------------------------------+ | +# | | +# | $swp3.10 + | +# | 192.0.2.17/28 | | +# | | | +# | $swp3 + | +# +---------------|--------------------------------------------+ +# | +# +---------------|--+ +# | $h3 + | +# | | | +# | $h3.10 + | +# | 192.0.2.18/28 | +# | | +# | H3 | +# +------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + port_vid_map_rif + rif_port_vid_map +" + +NUM_NETIFS=6 +source $lib_dir/lib.sh +source $lib_dir/tc_common.sh +source $lib_dir/devlink_lib.sh + +h1_create() +{ + simple_if_init $h1 + vlan_create $h1 10 v$h1 192.0.2.1/28 + + ip route add 192.0.2.16/28 vrf v$h1 nexthop via 192.0.2.2 +} + +h1_destroy() +{ + ip route del 192.0.2.16/28 vrf v$h1 nexthop via 192.0.2.2 + + vlan_destroy $h1 10 + simple_if_fini $h1 +} + +h2_create() +{ + simple_if_init $h2 + vlan_create $h2 10 v$h2 192.0.2.3/28 +} + +h2_destroy() +{ + vlan_destroy $h2 10 + simple_if_fini $h2 +} + +h3_create() +{ + simple_if_init $h3 + vlan_create $h3 10 v$h3 192.0.2.18/28 + + ip route add 192.0.2.0/28 vrf v$h3 nexthop via 192.0.2.17 +} + +h3_destroy() +{ + ip route del 192.0.2.0/28 vrf v$h3 nexthop via 192.0.2.17 + + vlan_destroy $h3 10 + simple_if_fini $h3 +} + +switch_create() +{ + ip link set dev $swp1 up + + ip link add dev br0 type bridge mcast_snooping 0 + + # By default, a link-local address is generated when netdevice becomes + # up. Adding an address to the bridge will cause creating a RIF for it. + # Prevent generating link-local address to be able to control when the + # RIF is added. + sysctl_set net.ipv6.conf.br0.addr_gen_mode 1 + ip link set dev br0 up + + ip link set dev $swp2 up + vlan_create $swp2 10 + ip link set dev $swp2.10 master br0 + + ip link set dev $swp3 up + vlan_create $swp3 10 "" 192.0.2.17/28 + tc qdisc add dev $swp3 clsact + + # Replace neighbor to avoid 1 packet which is forwarded in software due + # to "unresolved neigh". + ip neigh replace dev $swp3.10 192.0.2.18 lladdr $(mac_get $h3.10) +} + +switch_destroy() +{ + tc qdisc del dev $swp3 clsact + vlan_destroy $swp3 10 + ip link set dev $swp3 down + + ip link set dev $swp2.10 nomaster + vlan_destroy $swp2 10 + ip link set dev $swp2 down + + ip link set dev br0 down + sysctl_restore net.ipv6.conf.br0.addr_gen_mode + ip link del dev br0 + + ip link set dev $swp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + swp3=${NETIFS[p5]} + h3=${NETIFS[p6]} + + vrf_prepare + forwarding_enable + + h1_create + h2_create + h3_create + + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + + h3_destroy + h2_destroy + h1_destroy + + forwarding_restore + vrf_cleanup +} + +bridge_rif_add() +{ + rifs_occ_t0=$(devlink_resource_occ_get rifs) + __addr_add_del br0 add 192.0.2.2/28 + rifs_occ_t1=$(devlink_resource_occ_get rifs) + + expected_rifs=$((rifs_occ_t0 + 1)) + + [[ $expected_rifs -eq $rifs_occ_t1 ]] + check_err $? "Expected $expected_rifs RIFs, $rifs_occ_t1 are used" + + sleep 1 +} + +bridge_rif_del() +{ + __addr_add_del br0 del 192.0.2.2/28 +} + +port_vid_map_rif() +{ + RET=0 + + # First add {port, VID}->FID for $swp1.10, then add a RIF and verify + # that packets can be routed via the existing mapping. + vlan_create $swp1 10 + ip link set dev $swp1.10 master br0 + bridge_rif_add + + # The hardware matches on the first ethertype which is not VLAN, + # so the protocol should be IP. + tc filter add dev $swp3 egress protocol ip pref 1 handle 101 \ + flower skip_sw dst_ip 192.0.2.18 action pass + + ping_do $h1.10 192.0.2.18 + check_err $? "Ping failed" + + tc_check_at_least_x_packets "dev $swp3 egress" 101 10 + check_err $? "Packets were not routed in hardware" + + log_test "Add RIF for existing {port, VID}->FID mapping" + + tc filter del dev $swp3 egress + + bridge_rif_del + ip link set dev $swp1.10 nomaster + vlan_destroy $swp1 10 +} + +rif_port_vid_map() +{ + RET=0 + + # First add an address to the bridge, which will create a RIF on top of + # it, then add a new {port, VID}->FID mapping and verify that packets + # can be routed via the new mapping. + bridge_rif_add + vlan_create $swp1 10 + ip link set dev $swp1.10 master br0 + + # The hardware matches on the first ethertype which is not VLAN, + # so the protocol should be IP. + tc filter add dev $swp3 egress protocol ip pref 1 handle 101 \ + flower skip_sw dst_ip 192.0.2.18 action pass + + ping_do $h1.10 192.0.2.18 + check_err $? "Ping failed" + + tc_check_at_least_x_packets "dev $swp3 egress" 101 10 + check_err $? "Packets were not routed in hardware" + + log_test "Add {port, VID}->FID mapping for FID with a RIF" + + tc filter del dev $swp3 egress + + ip link set dev $swp1.10 nomaster + vlan_destroy $swp1 10 + bridge_rif_del +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/ingress_rif_conf_1q.sh b/tools/testing/selftests/drivers/net/mlxsw/ingress_rif_conf_1q.sh new file mode 100755 index 000000000000..577293bab88b --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/ingress_rif_conf_1q.sh @@ -0,0 +1,264 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test routing over bridge and verify that the order of configuration does not +# impact switch behavior. Verify that RIF is added correctly for existing +# mapping and that packets can be routed via port which is added after the FID +# already has a RIF. + +# +-------------------+ +--------------------+ +# | H1 | | H2 | +# | | | | +# | $h1.10 + | | + $h2.10 | +# | 192.0.2.1/28 | | | | 192.0.2.3/28 | +# | | | | | | +# | $h1 + | | + $h2 | +# +----------------|--+ +--|-----------------+ +# | | +# +----------------|-------------------------|-----------------+ +# | SW | | | +# | +--------------|-------------------------|---------------+ | +# | | $swp1 + + $swp2 | | +# | | | | +# | | br0 | | +# | +--------------------------------------------------------+ | +# | | | +# | br0.10 | +# | 192.0.2.2/28 | +# | | +# | | +# | $swp3 + | +# | 192.0.2.17/28 | | +# +----------------|-------------------------------------------+ +# | +# +----------------|--+ +# | $h3 + | +# | 192.0.2.18/28 | +# | | +# | H3 | +# +-------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + vid_map_rif + rif_vid_map +" + +NUM_NETIFS=6 +source $lib_dir/lib.sh +source $lib_dir/tc_common.sh +source $lib_dir/devlink_lib.sh + +h1_create() +{ + simple_if_init $h1 + vlan_create $h1 10 v$h1 192.0.2.1/28 + + ip route add 192.0.2.16/28 vrf v$h1 nexthop via 192.0.2.2 +} + +h1_destroy() +{ + ip route del 192.0.2.16/28 vrf v$h1 nexthop via 192.0.2.2 + + vlan_destroy $h1 10 + simple_if_fini $h1 +} + +h2_create() +{ + simple_if_init $h2 + vlan_create $h2 10 v$h2 192.0.2.3/28 +} + +h2_destroy() +{ + vlan_destroy $h2 10 + simple_if_fini $h2 +} + +h3_create() +{ + simple_if_init $h3 192.0.2.18/28 + ip route add 192.0.2.0/28 vrf v$h3 nexthop via 192.0.2.17 +} + +h3_destroy() +{ + ip route del 192.0.2.0/28 vrf v$h3 nexthop via 192.0.2.17 + simple_if_fini $h3 192.0.2.18/28 +} + +switch_create() +{ + ip link set dev $swp1 up + + ip link add dev br0 type bridge vlan_filtering 1 mcast_snooping 0 + + # By default, a link-local address is generated when netdevice becomes + # up. Adding an address to the bridge will cause creating a RIF for it. + # Prevent generating link-local address to be able to control when the + # RIF is added. + sysctl_set net.ipv6.conf.br0.addr_gen_mode 1 + ip link set dev br0 up + + ip link set dev $swp2 up + ip link set dev $swp2 master br0 + bridge vlan add vid 10 dev $swp2 + + ip link set dev $swp3 up + __addr_add_del $swp3 add 192.0.2.17/28 + tc qdisc add dev $swp3 clsact + + # Replace neighbor to avoid 1 packet which is forwarded in software due + # to "unresolved neigh". + ip neigh replace dev $swp3 192.0.2.18 lladdr $(mac_get $h3) +} + +switch_destroy() +{ + tc qdisc del dev $swp3 clsact + __addr_add_del $swp3 del 192.0.2.17/28 + ip link set dev $swp3 down + + bridge vlan del vid 10 dev $swp2 + ip link set dev $swp2 nomaster + ip link set dev $swp2 down + + ip link set dev br0 down + sysctl_restore net.ipv6.conf.br0.addr_gen_mode + ip link del dev br0 + + ip link set dev $swp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + swp3=${NETIFS[p5]} + h3=${NETIFS[p6]} + + vrf_prepare + forwarding_enable + + h1_create + h2_create + h3_create + + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + + h3_destroy + h2_destroy + h1_destroy + + forwarding_restore + vrf_cleanup +} + +bridge_rif_add() +{ + rifs_occ_t0=$(devlink_resource_occ_get rifs) + vlan_create br0 10 "" 192.0.2.2/28 + rifs_occ_t1=$(devlink_resource_occ_get rifs) + + expected_rifs=$((rifs_occ_t0 + 1)) + + [[ $expected_rifs -eq $rifs_occ_t1 ]] + check_err $? "Expected $expected_rifs RIFs, $rifs_occ_t1 are used" + + sleep 1 +} + +bridge_rif_del() +{ + vlan_destroy br0 10 +} + +vid_map_rif() +{ + RET=0 + + # First add VID->FID for vlan 10, then add a RIF and verify that + # packets can be routed via the existing mapping. + bridge vlan add vid 10 dev br0 self + ip link set dev $swp1 master br0 + bridge vlan add vid 10 dev $swp1 + + bridge_rif_add + + tc filter add dev $swp3 egress protocol ip pref 1 handle 101 \ + flower skip_sw dst_ip 192.0.2.18 action pass + + ping_do $h1.10 192.0.2.18 + check_err $? "Ping failed" + + tc_check_at_least_x_packets "dev $swp3 egress" 101 10 + check_err $? "Packets were not routed in hardware" + + log_test "Add RIF for existing VID->FID mapping" + + tc filter del dev $swp3 egress + + bridge_rif_del + + bridge vlan del vid 10 dev $swp1 + ip link set dev $swp1 nomaster + bridge vlan del vid 10 dev br0 self +} + +rif_vid_map() +{ + RET=0 + + # Using 802.1Q, there is only one VID->FID map for each VID. That means + # that we cannot really check adding a new map for existing FID with a + # RIF. Verify that packets can be routed via port which is added after + # the FID already has a RIF, although in practice there is no new + # mapping in the hardware. + bridge vlan add vid 10 dev br0 self + bridge_rif_add + + ip link set dev $swp1 master br0 + bridge vlan add vid 10 dev $swp1 + + tc filter add dev $swp3 egress protocol ip pref 1 handle 101 \ + flower skip_sw dst_ip 192.0.2.18 action pass + + ping_do $h1.10 192.0.2.18 + check_err $? "Ping failed" + + tc_check_at_least_x_packets "dev $swp3 egress" 101 10 + check_err $? "Packets were not routed in hardware" + + log_test "Add port to VID->FID mapping for FID with a RIF" + + tc filter del dev $swp3 egress + + bridge vlan del vid 10 dev $swp1 + ip link set dev $swp1 nomaster + + bridge_rif_del + bridge vlan del vid 10 dev br0 self +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/ingress_rif_conf_vxlan.sh b/tools/testing/selftests/drivers/net/mlxsw/ingress_rif_conf_vxlan.sh new file mode 100755 index 000000000000..90450216a10d --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/ingress_rif_conf_vxlan.sh @@ -0,0 +1,311 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test routing after VXLAN decapsulation and verify that the order of +# configuration does not impact switch behavior. Verify that RIF is added +# correctly for existing mapping and that new mapping uses the correct RIF. + +# +---------------------------+ +# | H1 | +# | + $h1 | +# | | 192.0.2.1/28 | +# +----|----------------------+ +# | +# +----|----------------------------------------------------------------------+ +# | SW | | +# | +--|--------------------------------------------------------------------+ | +# | | + $swp1 br1 | | +# | | vid 10 pvid untagged | | +# | | | | +# | | | | +# | | + vx4001 | | +# | | local 192.0.2.17 | | +# | | remote 192.0.2.18 | | +# | | id 104001 | | +# | | dstport $VXPORT | | +# | | vid 4001 pvid untagged | | +# | | | | +# | +----------------------------------+------------------------------------+ | +# | | | +# | +----------------------------------|------------------------------------+ | +# | | | | | +# | | +-------------------------------+---------------------------------+ | | +# | | | | | | +# | | + vlan10 vlan4001 + | | +# | | 192.0.2.2/28 | | +# | | | | +# | | vrf-green | | +# | +-----------------------------------------------------------------------+ | +# | | +# | + $rp1 +lo | +# | | 198.51.100.1/24 192.0.2.17/32 | +# +----|----------------------------------------------------------------------+ +# | +# +----|--------------------------------------------------------+ +# | | v$rp2 | +# | + $rp2 | +# | 198.51.100.2/24 | +# | | +# +-------------------------------------------------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + vni_fid_map_rif + rif_vni_fid_map +" + +NUM_NETIFS=4 +source $lib_dir/lib.sh +source $lib_dir/tc_common.sh +source $lib_dir/devlink_lib.sh + +: ${VXPORT:=4789} +export VXPORT + +h1_create() +{ + simple_if_init $h1 192.0.2.1/28 +} + +h1_destroy() +{ + simple_if_fini $h1 192.0.2.1/28 +} + +switch_create() +{ + ip link add name br1 type bridge vlan_filtering 1 vlan_default_pvid 0 \ + mcast_snooping 0 + # Make sure the bridge uses the MAC address of the local port and not + # that of the VxLAN's device. + ip link set dev br1 address $(mac_get $swp1) + ip link set dev br1 up + + ip link set dev $rp1 up + ip address add dev $rp1 198.51.100.1/24 + + ip link set dev $swp1 master br1 + ip link set dev $swp1 up + bridge vlan add vid 10 dev $swp1 pvid untagged + + tc qdisc add dev $swp1 clsact + + ip link add name vx4001 type vxlan id 104001 \ + local 192.0.2.17 dstport $VXPORT \ + nolearning noudpcsum tos inherit ttl 100 + ip link set dev vx4001 up + + ip link set dev vx4001 master br1 + + ip address add 192.0.2.17/32 dev lo + + # Create SVIs. + vrf_create "vrf-green" + ip link set dev vrf-green up + + ip link add link br1 name vlan10 up master vrf-green type vlan id 10 + + # Replace neighbor to avoid 1 packet which is forwarded in software due + # to "unresolved neigh". + ip neigh replace dev vlan10 192.0.2.1 lladdr $(mac_get $h1) + + ip address add 192.0.2.2/28 dev vlan10 + + bridge vlan add vid 10 dev br1 self + bridge vlan add vid 4001 dev br1 self + + sysctl_set net.ipv4.conf.all.rp_filter 0 +} + +switch_destroy() +{ + sysctl_restore net.ipv4.conf.all.rp_filter + + bridge vlan del vid 4001 dev br1 self + bridge vlan del vid 10 dev br1 self + + ip link del dev vlan10 + + vrf_destroy "vrf-green" + + ip address del 192.0.2.17/32 dev lo + + tc qdisc del dev $swp1 clsact + + bridge vlan del vid 10 dev $swp1 + ip link set dev $swp1 down + ip link set dev $swp1 nomaster + + ip link set dev vx4001 nomaster + + ip link set dev vx4001 down + ip link del dev vx4001 + + ip address del dev $rp1 198.51.100.1/24 + ip link set dev $rp1 down + + ip link set dev br1 down + ip link del dev br1 +} + +vrp2_create() +{ + simple_if_init $rp2 198.51.100.2/24 + + ip route add 192.0.2.17/32 vrf v$rp2 nexthop via 198.51.100.1 +} + +vrp2_destroy() +{ + ip route del 192.0.2.17/32 vrf v$rp2 nexthop via 198.51.100.1 + + simple_if_fini $rp2 198.51.100.2/24 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + rp1=${NETIFS[p3]} + rp2=${NETIFS[p4]} + + vrf_prepare + forwarding_enable + + h1_create + switch_create + + vrp2_create +} + +cleanup() +{ + pre_cleanup + + vrp2_destroy + + switch_destroy + h1_destroy + + forwarding_restore + vrf_cleanup +} + +payload_get() +{ + local dest_mac=$(mac_get vlan4001) + local src_mac=$(mac_get $rp1) + + p=$(: + )"08:"$( : VXLAN flags + )"00:00:00:"$( : VXLAN reserved + )"01:96:41:"$( : VXLAN VNI : 104001 + )"00:"$( : VXLAN reserved + )"$dest_mac:"$( : ETH daddr + )"$src_mac:"$( : ETH saddr + )"08:00:"$( : ETH type + )"45:"$( : IP version + IHL + )"00:"$( : IP TOS + )"00:54:"$( : IP total length + )"3f:49:"$( : IP identification + )"00:00:"$( : IP flags + frag off + )"3f:"$( : IP TTL + )"01:"$( : IP proto + )"50:21:"$( : IP header csum + )"c6:33:64:0a:"$( : IP saddr: 198.51.100.10 + )"c0:00:02:01:"$( : IP daddr: 192.0.2.1 + ) + echo $p +} + +vlan_rif_add() +{ + rifs_occ_t0=$(devlink_resource_occ_get rifs) + + ip link add link br1 name vlan4001 up master vrf-green \ + type vlan id 4001 + + rifs_occ_t1=$(devlink_resource_occ_get rifs) + expected_rifs=$((rifs_occ_t0 + 1)) + + [[ $expected_rifs -eq $rifs_occ_t1 ]] + check_err $? "Expected $expected_rifs RIFs, $rifs_occ_t1 are used" +} + +vlan_rif_del() +{ + ip link del dev vlan4001 +} + +vni_fid_map_rif() +{ + local rp1_mac=$(mac_get $rp1) + + RET=0 + + # First add VNI->FID mapping to the FID of VLAN 4001 + bridge vlan add vid 4001 dev vx4001 pvid untagged + + # Add a RIF to the FID with VNI->FID mapping + vlan_rif_add + + tc filter add dev $swp1 egress protocol ip pref 1 handle 101 \ + flower skip_sw dst_ip 192.0.2.1 action pass + + payload=$(payload_get) + ip vrf exec v$rp2 $MZ $rp2 -c 10 -d 1msec -b $rp1_mac \ + -B 192.0.2.17 -A 192.0.2.18 \ + -t udp sp=12345,dp=$VXPORT,p=$payload -q + + tc_check_at_least_x_packets "dev $swp1 egress" 101 10 + check_err $? "Packets were not routed in hardware" + + log_test "Add RIF for existing VNI->FID mapping" + + tc filter del dev $swp1 egress + + bridge vlan del vid 4001 dev vx4001 pvid untagged + vlan_rif_del +} + +rif_vni_fid_map() +{ + local rp1_mac=$(mac_get $rp1) + + RET=0 + + # First add a RIF to the FID of VLAN 4001 + vlan_rif_add + + # Add VNI->FID mapping to FID with a RIF + bridge vlan add vid 4001 dev vx4001 pvid untagged + + tc filter add dev $swp1 egress protocol ip pref 1 handle 101 \ + flower skip_sw dst_ip 192.0.2.1 action pass + + payload=$(payload_get) + ip vrf exec v$rp2 $MZ $rp2 -c 10 -d 1msec -b $rp1_mac \ + -B 192.0.2.17 -A 192.0.2.18 \ + -t udp sp=12345,dp=$VXPORT,p=$payload -q + + tc_check_at_least_x_packets "dev $swp1 egress" 101 10 + check_err $? "Packets were not routed in hardware" + + log_test "Add VNI->FID mapping for FID with a RIF" + + tc filter del dev $swp1 egress + + bridge vlan del vid 4001 dev vx4001 pvid untagged + vlan_rif_del +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS |