diff options
| -rw-r--r-- | arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi | 20 |
1 files changed, 19 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi index 4d3cd338a707..b0fa07ade76d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi @@ -61,6 +61,18 @@ vin-supply = <®_smarc_suppy>; }; + reg_sdio: regulator-sdio { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_sdio>; + regulator-name = "V_3V3_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + off-on-delay-us = <20000>; + }; + reg_smarc_lcdbklt: regulator-smarc-lcdbklt { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -640,6 +652,12 @@ >; }; + pinctrl_reg_sdio: reg-sdiogrp { + fsl,pins = < + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* SDIO_PWR_EN */ + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 @@ -692,7 +710,6 @@ MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 /* CD */ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b0 /* WP */ - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PWR_EN */ >; }; @@ -795,6 +812,7 @@ pinctrl-0 = <&pinctrl_usdhc3>; cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_sdio>; no-1-8-v; }; |