diff options
| -rw-r--r-- | arch/arm64/boot/dts/freescale/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts | 68 |
2 files changed, 69 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index a6d70b73d69b..a39f0a1723e0 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-kbox-a-230-ls.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var2.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var3-ads2.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var4.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts new file mode 100644 index 000000000000..0a34ff682027 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Device Tree file for the Kontron SMARC-sAL28 board. + * + * This is for the network variant 2 which has two ethernet ports. These + * ports are connected to the internal switch. + * + * Copyright (C) 2020 Michael Walle <[email protected]> + * + */ + +/dts-v1/; +#include "fsl-ls1028a-kontron-sl28.dts" + +/ { + model = "Kontron SMARC-sAL28 (TSN-on-module)"; + compatible = "kontron,sl28-var2", "kontron,sl28", "fsl,ls1028a"; +}; + +&enetc_mdio_pf3 { + phy0: ethernet-phy@5 { + reg = <0x5>; + eee-broken-1000t; + eee-broken-100tx; + }; + + phy1: ethernet-phy@4 { + reg = <0x4>; + eee-broken-1000t; + eee-broken-100tx; + }; +}; + +&enetc_port0 { + status = "disabled"; + /* + * In the base device tree the PHY was registered in the mdio + * subnode as it is PHY for this port. On this module this PHY + * is connected to a switch port instead and registered above. + * Therefore, delete the mdio subnode as well as the phy-handle + * property here. + */ + /delete-property/ phy-handle; + /delete-node/ mdio; +}; + +&enetc_port2 { + status = "okay"; +}; + +&mscc_felix_port0 { + label = "gbe0"; + phy-handle = <&phy0>; + phy-mode = "sgmii"; + status = "okay"; +}; + +&mscc_felix_port1 { + label = "gbe1"; + phy-handle = <&phy1>; + phy-mode = "sgmii"; + status = "okay"; +}; + +&mscc_felix_port4 { + ethernet = <&enetc_port2>; + status = "okay"; +}; |