aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/boot/dts/ste-dbx5x0.dtsi1
-rw-r--r--arch/arm/boot/dts/ste-href.dtsi1
-rw-r--r--arch/arm/boot/dts/ste-hrefv60plus.dtsi120
-rw-r--r--arch/arm/boot/dts/ste-snowball.dts84
4 files changed, 204 insertions, 2 deletions
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 6ae56838bd3a..d309314f3a36 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -604,6 +604,7 @@
#interrupt-cells = <2>;
ab8500_gpio: ab8500-gpio {
+ compatible = "stericsson,ab8500-gpio";
gpio-controller;
#gpio-cells = <2>;
};
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 6d8ce154347e..48dc38482633 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -223,7 +223,6 @@
prcmu@80157000 {
ab8500 {
ab8500-gpio {
- compatible = "stericsson,ab8500-gpio";
};
ab8500-regulators {
diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
index 45d7af326718..7187676836be 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi
+++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
@@ -18,6 +18,126 @@
compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
soc {
+ /* Name the GPIO muxed rails on the HREF boards */
+ gpio@8012e000 {
+ /* GPIOs 0 - 31 */
+ gpio-line-names =
+ /* GPIO0,1 used for UART0 BT RX/TX */
+ "", "",
+ "UART_WAKE",
+ "BT_WAKE",
+ "",
+ "SDMMC_1V8_3V_SEL",
+ "FLASH_LED_SYNC (FLASH_CTRL_0)",
+ "XENON_READY (FLASH_CTRL_1)",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "",
+ "",
+ "FLASH_LED_EN (FLASH_CTRL_3)",
+ "", "",
+ "", "", "", "", "",
+ /* Used by UART2 (console) */
+ "", "",
+ "MAGNETOMETER_INT";
+ };
+
+ gpio@8012e080 {
+ /* GPIOs 32 - 63 */
+ gpio-line-names =
+ "MAGNETOMETER_DRDY",
+ "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+ };
+
+ gpio@8000e000 {
+ /* GPIOs 64 - 95 */
+ gpio-line-names = "XENON_EN2 (FLASH_CTRL_4)",
+ "DISP1_RST",
+ "DISP2_RST",
+ "TOUCH_INT2",
+ "LCD_VSI0_A",
+ "LCD_VSI1_A",
+ /* GPIO 70-77 used for ETM */
+ "", "", "", "", "", "", "", "",
+ /* GPIO 78-81 used for YCBCR */
+ "", "", "", "",
+ "ACCELEROMETER_INT1_RDY",
+ "ACCELEROMETER_INT2",
+ "TOUCH_INT",
+ "WLAN_ENA",
+ "", "", "", "", "",
+ "FORCE_SENSING_INT",
+ "FORCE_SENSING_RESET",
+ "", "",
+ "SDMMC_CD";
+ };
+
+ gpio@8000e080 {
+ /* GPIOs 96 - 127 */
+ gpio-line-names = "",
+ "FORCE_SENSING_WU",
+ "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+ };
+
+ gpio@8000e100 {
+ /* GPIOs 128 - 159 */
+ gpio-line-names = "", "", "", "", "", "", "", "",
+ "", "", "",
+ "DIPRO_INT", /* GPIO139 */
+ "XSHUTDOWN_SECONDARY_SENSOR",
+ "XSHUTDOWN_PRIMARY_SENSOR",
+ "NFC_RST (NFC_CTRL_",
+ "TOUCH_RST",
+ "NFC_IRQ (NFC_CTRL_1)",
+ "HAL_SW",
+ "TOUCH_RST2",
+ "", "",
+ "VAUDIO_HF_EN", /* GPIO149 */
+ "", "", "", "", "", "", "", "", "", "";
+ };
+
+ gpio@8000e180 {
+ /* GPIOs 160 - 191 */
+ gpio-line-names = "", "", "", "", "", "", "", "",
+ "",
+ "SDMMC_EN",
+ "XENON_CHARGE (FLASH_CONTROL_5)",
+ "GBF_ENA_RESET",
+ "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+ };
+
+ gpio@8011e000 {
+ /* GPIOs 192 - 223 */
+ gpio-line-names = "HDTV_INTN",
+ "", "", "",
+ "HDTV_RSTN",
+ "", "", "",
+ "", /* GPIO200 */
+ "", "", "", "", "", "", "",
+ /* GPIO208-216 used for WGBF_MC1 */
+ "", "", "", "", "", "", "", "", "",
+ "SW_FRONT_PROXIMITY", /* GPIO217 */
+ "KPD_CTRL_INT", /* Keypad controller */
+ "", "", "", "", "";
+ };
+
+ gpio@8011e080 {
+ /* GPIOs 224 - 255 */
+ gpio-line-names = "", "",
+ "HSIT_ACWAKE0",
+ "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+ };
+
// External Micro SD slot
sdi0_per1@80126000 {
cd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; // 95
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 36e84efc401c..b3df1c60d465 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -95,6 +95,70 @@
};
soc {
+ /* Name the GPIO muxed rails on the Snowball board */
+ gpio@8012e000 {
+ /* GPIOs 0 - 31 */
+ gpio-line-names = "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "",
+ "AP_GPIO31";
+ };
+
+ gpio@8012e080 {
+ /* GPIOs 32 - 63 */
+ gpio-line-names = "USR PB", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+ };
+
+ gpio@8000e000 {
+ /* GPIOs 64 - 95 */
+ gpio-line-names = "", "", "", "", "AP_GPIO68", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+ };
+
+ gpio@8000e100 {
+ /* GPIOs 128 - 159 */
+ gpio-line-names = "", "", "", "", "", "", "", "",
+ "", "", "", "", "IRQ_LAN", "RSTn_LAN",
+ "USR_LED", "", "", "", "", "", "",
+ "", "", "AP_GPIO151", "AP_GPIO152",
+ "", "", "", "", "", "", "";
+ };
+
+ gpio@8000e180 {
+ /* GPIOs 160 - 191 */
+ gpio-line-names = "", "AP_GPIO161", "AP_GPIO162",
+ "ACCELEROMETER_INT1_RDY",
+ "ACCELEROMETER_INT2", "MAG_DRDY",
+ "GYRO_DRDY", "RSTn_MLC", "RSTn_SLC",
+ "GYRO_INT", "UART_WAKE", "GBF_RESET",
+ "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+ };
+
+ gpio@8011e000 {
+ /* GPIOs 192 - 223 */
+ gpio-line-names = "HDTV_INTn", "", "", "", "HDTV_RST",
+ "", "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "", "",
+ "WLAN_RESETN", "WLAN_IRQ", "MMC_EN",
+ "MMC_CD", "", "", "", "", "";
+ };
+
+ gpio@8011e080 {
+ /* GPIOs 224 - 255 */
+ gpio-line-names = "", "", "", "", "SD_SEL", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+ };
+
usb_per5@a03e0000 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&musb_default_mode>;
@@ -352,7 +416,25 @@
ab8500 {
ab8500-gpio {
- compatible = "stericsson,ab8500-gpio";
+ /*
+ * AB8500 GPIOs are numbered starting from 1, so the first
+ * index 0 is what in the datasheet is called "GPIO1", and
+ * the second is "GPIO2" and so forth. Confusingly, the
+ * Snowball schematic then names the "GPIO2" line "PM_GPIO1".
+ * while later naming "GPIO4" as "PM_GPIO4".
+ */
+ gpio-line-names = "", /* AB8500 GPIO1 */
+ "PM_GPIO1", /* AB8500 GPIO2 */
+ "WLAN_CLK_REQ", /* AB8500 GPIO3 */
+ "PM_GPIO4", /* AB8500 GPIO4 */
+ "", "", "", "", "", "", "", "", "", "", "",
+ "EN_3V6", /* AB8500 GPIO16 */
+ "", "", "", "" ,"", "", "", "", "",
+ "EN_3V3", /* AB8500 GPIO26 */
+ "", "", "", "", "", "", "", "", "", "", "", "", "",
+ "PM_GPIO40", /* AB8500 GPIO40 */
+ "PM_GPIO41", /* AB8500 GPIO41 */
+ "PM_GPIO42"; /* AB8500 GPIO42 */
};
ext_regulators: ab8500-ext-regulators {
Powered by cgit, Gruvboxed by Blaster4385.