diff options
23 files changed, 532 insertions, 73 deletions
diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.txt b/Documentation/devicetree/bindings/soc/rockchip/grf.txt new file mode 100644 index 000000000000..013e71a2cdc7 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.txt @@ -0,0 +1,35 @@ +* Rockchip General Register Files (GRF) + +The general register file will be used to do static set by software, which +is composed of many registers for system control. + +From RK3368 SoCs, the GRF is divided into two sections, +- GRF, used for general non-secure system, +- PMUGRF, used for always on system + +Required Properties: + +- compatible: GRF should be one of the followings + - "rockchip,rk3066-grf", "syscon": for rk3066 + - "rockchip,rk3188-grf", "syscon": for rk3188 + - "rockchip,rk3228-grf", "syscon": for rk3228 + - "rockchip,rk3288-grf", "syscon": for rk3288 + - "rockchip,rk3368-grf", "syscon": for rk3368 + - "rockchip,rk3399-grf", "syscon": for rk3399 +- compatible: PMUGRF should be one of the followings + - "rockchip,rk3368-pmugrf", "syscon": for rk3368 + - "rockchip,rk3399-pmugrf", "syscon": for rk3399 +- reg: physical base address of the controller and length of memory mapped + region. + +Example: GRF and PMUGRF of RK3399 SoCs + + pmugrf: syscon@ff320000 { + compatible = "rockchip,rk3399-pmugrf", "syscon"; + reg = <0x0 0xff320000 0x0 0x1000>; + }; + + grf: syscon@ff770000 { + compatible = "rockchip,rk3399-grf", "syscon"; + reg = <0x0 0xff770000 0x0 0x10000>; + }; diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts index b3d6ec87f615..8db9e9b197a2 100644 --- a/arch/arm/boot/dts/rk3036-evb.dts +++ b/arch/arm/boot/dts/rk3036-evb.dts @@ -45,6 +45,11 @@ / { model = "Rockchip RK3036 Evaluation board"; compatible = "rockchip,rk3036-evb", "rockchip,rk3036"; + + memory { + device_type = "memory"; + reg = <0x60000000 0x40000000>; + }; }; &emac { diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts index 6251d109eff4..1df1557a46c3 100644 --- a/arch/arm/boot/dts/rk3036-kylin.dts +++ b/arch/arm/boot/dts/rk3036-kylin.dts @@ -46,6 +46,11 @@ model = "Rockchip RK3036 KylinBoard"; compatible = "rockchip,rk3036-kylin", "rockchip,rk3036"; + memory { + device_type = "memory"; + reg = <0x60000000 0x20000000>; + }; + leds: gpio-leds { compatible = "gpio-leds"; @@ -130,6 +135,10 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + &i2c1 { clock-frequency = <400000>; @@ -341,7 +350,6 @@ &sdio { status = "okay"; - broken-cd; bus-width = <4>; cap-sd-highspeed; cap-sdio-irq; @@ -385,6 +393,14 @@ status = "okay"; }; +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + &pinctrl { leds { led_ctl: led-ctl { diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index d0f4bb7e1e50..843d2be2e4e9 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -63,11 +63,6 @@ spi = &spi; }; - memory { - device_type = "memory"; - reg = <0x60000000 0x40000000>; - }; - cpus { #address-cells = <1>; #size-cells = <0>; @@ -119,6 +114,11 @@ interrupt-affinity = <&cpu0>, <&cpu1>; }; + display-subsystem { + compatible = "rockchip,display-subsystem"; + ports = <&vop_out>; + }; + timer { compatible = "arm,armv7-timer"; arm,cpu-registers-not-fw-configured; @@ -149,6 +149,36 @@ }; }; + vop: vop@10118000 { + compatible = "rockchip,rk3036-vop"; + reg = <0x10118000 0x19c>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_LCDC>, <&cru SCLK_LCDC>, <&cru HCLK_LCDC>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + resets = <&cru SRST_LCDC1_A>, <&cru SRST_LCDC1_H>, <&cru SRST_LCDC1_D>; + reset-names = "axi", "ahb", "dclk"; + iommus = <&vop_mmu>; + status = "disabled"; + + vop_out: port { + #address-cells = <1>; + #size-cells = <0>; + vop_out_hdmi: endpoint@0 { + reg = <0>; + remote-endpoint = <&hdmi_in_vop>; + }; + }; + }; + + vop_mmu: iommu@10118300 { + compatible = "rockchip,iommu"; + reg = <0x10118300 0x100>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "vop_mmu"; + #iommu-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@10139000 { compatible = "arm,gic-400"; interrupt-controller; @@ -237,7 +267,6 @@ compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x1021c000 0x4000>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - broken-cd; bus-width = <8>; cap-mmc-highspeed; clock-frequency = <37500000>; @@ -297,6 +326,27 @@ status = "disabled"; }; + hdmi: hdmi@20034000 { + compatible = "rockchip,rk3036-inno-hdmi"; + reg = <0x20034000 0x4000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_HDMI>; + clock-names = "pclk"; + rockchip,grf = <&grf>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_ctl>; + status = "disabled"; + + hdmi_in: port { + #address-cells = <1>; + #size-cells = <0>; + hdmi_in_vop: endpoint@0 { + reg = <0>; + remote-endpoint = <&vop_out_hdmi>; + }; + }; + }; + timer: timer@20044000 { compatible = "rockchip,rk3036-timer", "rockchip,rk3288-timer"; reg = <0x20044000 0x20>; @@ -644,6 +694,15 @@ }; }; + hdmi { + hdmi_ctl: hdmi-ctl { + rockchip,pins = <1 8 RK_FUNC_1 &pcfg_pull_none>, + <1 9 RK_FUNC_1 &pcfg_pull_none>, + <1 10 RK_FUNC_1 &pcfg_pull_none>, + <1 11 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + uart0 { uart0_xfer: uart0-xfer { rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_default>, diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index 6d2a5b3a84a8..bc674ee206ec 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -42,6 +42,7 @@ */ /dts-v1/; +#include <dt-bindings/input/input.h> #include "rk3066a.dtsi" / { @@ -77,21 +78,19 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; - button@0 { + power { gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */ - linux,code = <116>; + linux,code = <KEY_POWER>; label = "GPIO Key Power"; linux,input-type = <1>; wakeup-source; debounce-interval = <100>; }; - button@1 { + volume-down { gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */ - linux,code = <104>; + linux,code = <KEY_VOLUMEDOWN>; label = "GPIO Key Vol-"; linux,input-type = <1>; debounce-interval = <100>; diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts index 05533005a809..6e7f2187a0e3 100644 --- a/arch/arm/boot/dts/rk3066a-rayeager.dts +++ b/arch/arm/boot/dts/rk3066a-rayeager.dts @@ -41,6 +41,7 @@ */ /dts-v1/; +#include <dt-bindings/input/input.h> #include "rk3066a.dtsi" / { @@ -61,14 +62,12 @@ keys: gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + power { wakeup-source; gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; - linux,code = <116>; + linux,code = <KEY_POWER>; pinctrl-names = "default"; pinctrl-0 = <&pwr_key>; }; @@ -182,7 +181,6 @@ }; &emmc { - broken-cd; bus-width = <8>; cap-mmc-highspeed; disable-wp; @@ -348,7 +346,6 @@ }; &mmc1 { - broken-cd; bus-width = <4>; disable-wp; non-removable; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index cb0a552e0b18..c0ba86c3a2ab 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -169,7 +169,7 @@ clocks = <&cru PCLK_EFUSE>; clock-names = "pclk_efuse"; - cpu_leakage: cpu_leakage { + cpu_leakage: cpu_leakage@17 { reg = <0x17 0x1>; }; }; @@ -207,7 +207,7 @@ #size-cells = <0>; status = "disabled"; - usbphy0: usb-phy0 { + usbphy0: usb-phy@17c { #phy-cells = <0>; reg = <0x17c>; clocks = <&cru SCLK_OTGPHY0>; @@ -215,7 +215,7 @@ #clock-cells = <0>; }; - usbphy1: usb-phy1 { + usbphy1: usb-phy@188 { #phy-cells = <0>; reg = <0x188>; clocks = <&cru SCLK_OTGPHY1>; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 0b6924c97b6b..1da46d138029 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -41,6 +41,7 @@ */ /dts-v1/; +#include <dt-bindings/input/input.h> #include "rk3188.dtsi" / { @@ -54,13 +55,11 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; - button@0 { + power { gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; - linux,code = <116>; + linux,code = <KEY_POWER>; label = "GPIO Key Power"; linux,input-type = <1>; wakeup-source; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index 9271833958f9..31f81b265cef 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -154,7 +154,7 @@ clocks = <&cru PCLK_EFUSE>; clock-names = "pclk_efuse"; - cpu_leakage: cpu_leakage { + cpu_leakage: cpu_leakage@17 { reg = <0x17 0x1>; }; }; @@ -166,7 +166,7 @@ #size-cells = <0>; status = "disabled"; - usbphy0: usb-phy0 { + usbphy0: usb-phy@10c { #phy-cells = <0>; reg = <0x10c>; clocks = <&cru SCLK_OTGPHY0>; @@ -174,7 +174,7 @@ #clock-cells = <0>; }; - usbphy1: usb-phy1 { + usbphy1: usb-phy@11c { #phy-cells = <0>; reg = <0x11c>; clocks = <&cru SCLK_OTGPHY1>; diff --git a/arch/arm/boot/dts/rk3228-evb.dts b/arch/arm/boot/dts/rk3228-evb.dts index e3898b810150..5956e8246abe 100644 --- a/arch/arm/boot/dts/rk3228-evb.dts +++ b/arch/arm/boot/dts/rk3228-evb.dts @@ -53,7 +53,6 @@ }; &emmc { - broken-cd; cap-mmc-highspeed; mmc-ddr-1_8v; disable-wp; @@ -61,6 +60,13 @@ status = "okay"; }; +&tsadc { + status = "okay"; + + rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */ +}; + &uart2 { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3228.dtsi b/arch/arm/boot/dts/rk3228.dtsi index 4dae42a01509..f9c34124ccc3 100644 --- a/arch/arm/boot/dts/rk3228.dtsi +++ b/arch/arm/boot/dts/rk3228.dtsi @@ -43,6 +43,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/rockchip.h> #include <dt-bindings/clock/rk3228-cru.h> +#include <dt-bindings/thermal/thermal.h> #include "skeleton.dtsi" / { @@ -69,6 +70,7 @@ /* KHz uV */ 816000 1000000 >; + #cooling-cells = <2>; /* min followed by max */ clock-latency = <40000>; clocks = <&cru ARMCLK>; }; @@ -247,6 +249,63 @@ assigned-clock-rates = <594000000>; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <100>; /* milliseconds */ + polling-delay = <5000>; /* milliseconds */ + + thermal-sensors = <&tsadc 0>; + + trips { + cpu_alert0: cpu_alert0 { + temperature = <70000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu_alert1: cpu_alert1 { + temperature = <75000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu_crit: cpu_crit { + temperature = <90000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT 6>; + }; + map1 { + trip = <&cpu_alert1>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + + tsadc: tsadc@11150000 { + compatible = "rockchip,rk3228-tsadc"; + reg = <0x11150000 0x100>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; + clock-names = "tsadc", "apb_pclk"; + resets = <&cru SRST_TSADC>; + reset-names = "tsadc-apb"; + pinctrl-names = "init", "default", "sleep"; + pinctrl-0 = <&otp_gpio>; + pinctrl-1 = <&otp_out>; + pinctrl-2 = <&otp_gpio>; + #thermal-sensor-cells = <0>; + rockchip,hw-tshut-temp = <95000>; + status = "disabled"; + }; + emmc: dwmmc@30020000 { compatible = "rockchip,rk3288-dw-mshc"; reg = <0x30020000 0x4000>; @@ -394,6 +453,16 @@ }; }; + tsadc { + otp_gpio: otp-gpio { + rockchip,pins = <0 24 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + otp_out: otp-out { + rockchip,pins = <0 24 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + uart0 { uart0_xfer: uart0-xfer { rockchip,pins = <2 26 RK_FUNC_1 &pcfg_pull_none>, diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 78d47f7d2938..963365d12208 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -38,6 +38,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ +#include <dt-bindings/input/input.h> #include <dt-bindings/pwm/pwm.h> #include "rk3288.dtsi" @@ -98,16 +99,14 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; pinctrl-names = "default"; pinctrl-0 = <&pwrbtn>; - button@0 { + power { gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; - linux,code = <116>; + linux,code = <KEY_POWER>; label = "GPIO Key Power"; linux,input-type = <1>; wakeup-source; @@ -172,7 +171,6 @@ }; &emmc { - broken-cd; bus-width = <8>; cap-mmc-highspeed; disable-wp; diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index 98c586a43c73..d6cf9ada13c9 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -40,6 +40,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ +#include <dt-bindings/input/input.h> #include "rk3288.dtsi" / { @@ -87,14 +88,12 @@ keys: gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + power { wakeup-source; gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; label = "GPIO Power"; - linux,code = <116>; + linux,code = <KEY_POWER>; pinctrl-names = "default"; pinctrl-0 = <&pwr_key>; }; @@ -208,7 +207,6 @@ }; &emmc { - broken-cd; bus-width = <8>; cap-mmc-highspeed; disable-wp; @@ -509,7 +507,6 @@ }; &sdio0 { - broken-cd; bus-width = <4>; disable-wp; non-removable; diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts index 2ff9689d2e1b..720717bb3614 100644 --- a/arch/arm/boot/dts/rk3288-popmetal.dts +++ b/arch/arm/boot/dts/rk3288-popmetal.dts @@ -41,7 +41,7 @@ */ /dts-v1/; - +#include <dt-bindings/input/input.h> #include "rk3288.dtsi" / { @@ -62,16 +62,14 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; pinctrl-names = "default"; pinctrl-0 = <&pwrbtn>; - button@0 { + power { gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; - linux,code = <116>; + linux,code = <KEY_POWER>; label = "GPIO Key Power"; linux,input-type = <1>; wakeup-source; @@ -162,7 +160,6 @@ }; &emmc { - broken-cd; bus-width = <8>; cap-mmc-highspeed; disable-wp; diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts index 510a1d0d7abb..4b8a8adb243c 100644 --- a/arch/arm/boot/dts/rk3288-r89.dts +++ b/arch/arm/boot/dts/rk3288-r89.dts @@ -41,6 +41,7 @@ */ /dts-v1/; +#include <dt-bindings/input/input.h> #include <dt-bindings/pwm/pwm.h> #include "rk3288.dtsi" @@ -61,16 +62,14 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; pinctrl-names = "default"; pinctrl-0 = <&pwrbtn>; - button@0 { + power { gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; - linux,code = <116>; + linux,code = <KEY_POWER>; label = "GPIO Key Power"; linux,input-type = <1>; wakeup-source; diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi index 610769d99522..2958c36d12a0 100644 --- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi @@ -54,6 +54,50 @@ i2c20 = &i2c_tunnel; }; + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = < + 0 1 2 3 4 5 6 7 + 8 9 10 11 12 13 14 15 + 16 17 18 19 20 21 22 23 + 24 25 26 27 28 29 30 31 + 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255>; + default-brightness-level = <128>; + enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; + backlight-boot-off; + pinctrl-names = "default"; + pinctrl-0 = <&bl_en>; + pwms = <&pwm0 0 1000000 0>; + pwm-delay-us = <10000>; + }; + gpio-charger { compatible = "gpio-charger"; charger-type = "mains"; @@ -62,6 +106,21 @@ pinctrl-0 = <&ac_present_ap>; }; + panel: panel { + compatible ="innolux,n116bge", "simple-panel"; + status = "okay"; + power-supply = <&vcc33_lcd>; + backlight = <&backlight>; + + ports { + panel_in: port { + panel_in_edp: endpoint { + remote-endpoint = <&edp_out_panel>; + }; + }; + }; + }; + /* A non-regulated voltage from power supply or battery */ vccsys: vccsys { compatible = "regulator-fixed"; @@ -103,6 +162,29 @@ }; }; +&edp { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_hpd>; + + ports { + edp_out: port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + edp_out_panel: endpoint { + reg = <0>; + remote-endpoint = <&panel_in_edp>; + }; + }; + }; +}; + +&edp_phy { + status = "okay"; +}; + &gpio_keys { pinctrl-0 = <&pwr_key_l &ap_lid_int_l>; lid { @@ -115,6 +197,10 @@ }; }; +&pwm0 { + status = "okay"; +}; + &rk808 { vcc11-supply = <&vcc_5v>; @@ -168,6 +254,14 @@ }; }; +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; + &pinctrl { pinctrl-0 = < /* Common for sleep and wake, but no owners */ @@ -184,6 +278,12 @@ &suspend_l_sleep >; + backlight { + bl_en: bl-en { + rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + buttons { ap_lid_int_l: ap-lid-int-l { rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>; diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts index c2f52cfb4d06..3748abf562b1 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts @@ -61,6 +61,7 @@ pinctrl-names = "default"; pinctrl-0 = <&lcd_enable_h>; regulator-name = "panel_regulator"; + startup-delay-us = <100000>; vin-supply = <&vcc33_sys>; }; @@ -88,6 +89,48 @@ }; }; +&backlight { + /* Jaq panel PWM must be >= 3%, so start non-zero brightness at 8 */ + brightness-levels = < + 0 + 8 9 10 11 12 13 14 15 + 16 17 18 19 20 21 22 23 + 24 25 26 27 28 29 30 31 + 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255>; + power-supply = <&backlight_regulator>; +}; + +&panel { + power-supply = <&panel_regulator>; +}; + &rk808 { pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; @@ -142,12 +185,6 @@ }; }; - edp { - edp_hpd: edp_hpd { - rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_down>; - }; - }; - hdmi { vcc50_hdmi_en: vcc50-hdmi-en { rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>; diff --git a/arch/arm/boot/dts/rk3288-veyron-jerry.dts b/arch/arm/boot/dts/rk3288-veyron-jerry.dts index 60bd6e91e308..f6b2eaaebb9a 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jerry.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jerry.dts @@ -60,6 +60,7 @@ pinctrl-names = "default"; pinctrl-0 = <&lcd_enable_h>; regulator-name = "panel_regulator"; + startup-delay-us = <100000>; vin-supply = <&vcc33_sys>; }; @@ -87,6 +88,14 @@ }; }; +&backlight { + power-supply = <&backlight_regulator>; +}; + +&panel { + power-supply= <&panel_regulator>; +}; + &rk808 { pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l>; diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts index 699beb0a9481..f72d616d1bf8 100644 --- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts +++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts @@ -70,6 +70,7 @@ pinctrl-names = "default"; pinctrl-0 = <&lcd_enable_h>; regulator-name = "panel_regulator"; + startup-delay-us = <100000>; vin-supply = <&vcc33_sys>; }; @@ -86,6 +87,44 @@ }; }; +&backlight { + /* Minnie panel PWM must be >= 1%, so start non-zero brightness at 3 */ + brightness-levels = < + 0 3 4 5 6 7 + 8 9 10 11 12 13 14 15 + 16 17 18 19 20 21 22 23 + 24 25 26 27 28 29 30 31 + 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255>; + power-supply = <&backlight_regulator>; +}; + &emmc { /delete-property/mmc-hs200-1_8v; }; @@ -135,6 +174,11 @@ }; }; +&panel { + compatible = "auo,b101ean01", "simple-panel"; + power-supply= <&panel_regulator>; +}; + &rk808 { pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts index 94b56e33d947..d44351ec2333 100644 --- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts +++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts @@ -65,6 +65,13 @@ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8 &emmc_reset>; }; +&edp { + /delete-property/pinctrl-names; + /delete-property/pinctrl-0; + + force-hpd; +}; + &gpio_keys { pinctrl-0 = <&pwr_key_h &ap_lid_int_l>; diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts index b34a7b5b3f62..a0d033f6fe52 100644 --- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts +++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts @@ -61,6 +61,7 @@ pinctrl-names = "default"; pinctrl-0 = <&lcd_enable_h>; regulator-name = "panel_regulator"; + startup-delay-us = <100000>; vin-supply = <&vcc33_sys>; }; @@ -88,6 +89,10 @@ }; }; +&backlight { + power-supply = <&backlight_regulator>; +}; + &cpu_alert0 { temperature = <65000>; }; @@ -96,6 +101,17 @@ temperature = <70000>; }; +&edp { + /delete-property/pinctrl-names; + /delete-property/pinctrl-0; + + force-hpd; +}; + +&panel { + power-supply= <&panel_regulator>; +}; + &rk808 { pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l>; diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index 412809c60d01..b2557bf5a58f 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -141,12 +141,27 @@ &cpu0 { cpu0-supply = <&vdd_cpu>; + operating-points = < + /* KHz uV */ + 1800000 1400000 + 1704000 1350000 + 1608000 1300000 + 1512000 1250000 + 1416000 1200000 + 1200000 1100000 + 1008000 1050000 + 816000 1000000 + 696000 950000 + 600000 900000 + 408000 900000 + 216000 900000 + 126000 900000 + >; }; &emmc { status = "okay"; - broken-cd; bus-width = <8>; cap-mmc-highspeed; rockchip,default-sample-phase = <158>; @@ -347,7 +362,6 @@ &sdio0 { status = "okay"; - broken-cd; bus-width = <4>; cap-sd-highspeed; cap-sdio-irq; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 31f7e20ef418..3071e94e86ed 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -201,6 +201,15 @@ #clock-cells = <0>; }; + edp_phy: edp-phy { + compatible = "rockchip,rk3288-dp-phy"; + clocks = <&cru SCLK_EDP_24M>; + clock-names = "24m"; + rockchip,grf = <&grf>; + #phy-cells = <0>; + status = "disabled"; + }; + timer { compatible = "arm,armv7-timer"; arm,cpu-registers-not-fw-configured; @@ -659,7 +668,7 @@ * *_HDMI HDMI * *_MIPI_* MIPI */ - pd_vio { + pd_vio@RK3288_PD_VIO { reg = <RK3288_PD_VIO>; clocks = <&cru ACLK_IEP>, <&cru ACLK_ISP>, @@ -692,7 +701,7 @@ * Note: The following 3 are HEVC(H.265) clocks, * and on the ACLK_HEVC_NIU (NOC). */ - pd_hevc { + pd_hevc@RK3288_PD_HEVC { reg = <RK3288_PD_HEVC>; clocks = <&cru ACLK_HEVC>, <&cru SCLK_HEVC_CABAC>, @@ -704,7 +713,7 @@ * (video endecoder & decoder) clocks that on the * ACLK_VCODEC_NIU and HCLK_VCODEC_NIU (NOC). */ - pd_video { + pd_video@RK3288_PD_VIDEO { reg = <RK3288_PD_VIDEO>; clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; @@ -714,7 +723,7 @@ * Note: ACLK_GPU is the GPU clock, * and on the ACLK_GPU_NIU (NOC). */ - pd_gpu { + pd_gpu@RK3288_PD_GPU { reg = <RK3288_PD_GPU>; clocks = <&cru ACLK_GPU>; }; @@ -765,7 +774,7 @@ clocks = <&cru HCLK_SPDIF8CH>, <&cru SCLK_SPDIF8CH>; dmas = <&dmac_bus_s 3>; dma-names = "tx"; - interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&spdif_tx>; rockchip,grf = <&grf>; @@ -775,7 +784,7 @@ i2s: i2s@ff890000 { compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s"; reg = <0xff890000 0x10000>; - interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; dmas = <&dmac_bus_s 0>, <&dmac_bus_s 1>; @@ -821,6 +830,12 @@ reg = <0>; remote-endpoint = <&hdmi_in_vopb>; }; + + vopb_out_edp: endpoint@1 { + reg = <1>; + remote-endpoint = <&edp_in_vopb>; + }; + vopb_out_mipi: endpoint@2 { reg = <2>; remote-endpoint = <&mipi_in_vopb>; @@ -858,6 +873,12 @@ reg = <0>; remote-endpoint = <&hdmi_in_vopl>; }; + + vopl_out_edp: endpoint@1 { + reg = <1>; + remote-endpoint = <&edp_in_vopl>; + }; + vopl_out_mipi: endpoint@2 { reg = <2>; remote-endpoint = <&mipi_in_vopl>; @@ -878,19 +899,16 @@ mipi_dsi: mipi@ff960000 { compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi"; reg = <0xff960000 0x4000>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_MIPIDSI_24M>, <&cru PCLK_MIPI_DSI0>; clock-names = "ref", "pclk"; + power-domains = <&power RK3288_PD_VIO>; rockchip,grf = <&grf>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; ports { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - mipi_in: port { #address-cells = <1>; #size-cells = <0>; @@ -906,6 +924,38 @@ }; }; + edp: dp@ff970000 { + compatible = "rockchip,rk3288-dp"; + reg = <0xff970000 0x4000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>; + clock-names = "dp", "pclk"; + phys = <&edp_phy>; + phy-names = "dp"; + resets = <&cru SRST_EDP>; + reset-names = "dp"; + rockchip,grf = <&grf>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + edp_in: port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + edp_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_edp>; + }; + edp_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_edp>; + }; + }; + }; + }; + hdmi: hdmi@ff980000 { compatible = "rockchip,rk3288-dw-hdmi"; reg = <0xff980000 0x20000>; @@ -966,7 +1016,7 @@ #size-cells = <0>; status = "disabled"; - usbphy0: usb-phy0 { + usbphy0: usb-phy@320 { #phy-cells = <0>; reg = <0x320>; clocks = <&cru SCLK_OTGPHY0>; @@ -974,7 +1024,7 @@ #clock-cells = <0>; }; - usbphy1: usb-phy1 { + usbphy1: usb-phy@334 { #phy-cells = <0>; reg = <0x334>; clocks = <&cru SCLK_OTGPHY1>; @@ -982,7 +1032,7 @@ #clock-cells = <0>; }; - usbphy2: usb-phy2 { + usbphy2: usb-phy@348 { #phy-cells = <0>; reg = <0x348>; clocks = <&cru SCLK_OTGPHY2>; @@ -1158,6 +1208,12 @@ }; }; + edp { + edp_hpd: edp-hpd { + rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_down>; + }; + }; + i2c0 { i2c0_xfer: i2c0-xfer { rockchip,pins = <0 15 RK_FUNC_1 &pcfg_pull_none>, |