diff options
| -rw-r--r-- | Documentation/ABI/testing/debugfs-cxl | 30 | ||||
| -rw-r--r-- | Documentation/firmware-guide/acpi/apei/einj.rst | 34 | ||||
| -rw-r--r-- | MAINTAINERS | 1 | ||||
| -rw-r--r-- | drivers/acpi/apei/Kconfig | 13 | ||||
| -rw-r--r-- | drivers/acpi/apei/Makefile | 2 | ||||
| -rw-r--r-- | drivers/acpi/apei/apei-internal.h | 18 | ||||
| -rw-r--r-- | drivers/acpi/apei/einj-core.c (renamed from drivers/acpi/apei/einj.c) | 122 | ||||
| -rw-r--r-- | drivers/acpi/apei/einj-cxl.c | 113 | ||||
| -rw-r--r-- | drivers/cxl/core/port.c | 41 | ||||
| -rw-r--r-- | include/linux/einj-cxl.h | 44 |
10 files changed, 397 insertions, 21 deletions
diff --git a/Documentation/ABI/testing/debugfs-cxl b/Documentation/ABI/testing/debugfs-cxl index fe61d372e3fa..4c0f62f881ca 100644 --- a/Documentation/ABI/testing/debugfs-cxl +++ b/Documentation/ABI/testing/debugfs-cxl @@ -33,3 +33,33 @@ Description: device cannot clear poison from the address, -ENXIO is returned. The clear_poison attribute is only visible for devices supporting the capability. + +What: /sys/kernel/debug/cxl/einj_types +Date: January, 2024 +KernelVersion: v6.9 +Contact: [email protected] +Description: + (RO) Prints the CXL protocol error types made available by + the platform in the format "0x<error number> <error type>". + The possible error types are (as of ACPI v6.5): + 0x1000 CXL.cache Protocol Correctable + 0x2000 CXL.cache Protocol Uncorrectable non-fatal + 0x4000 CXL.cache Protocol Uncorrectable fatal + 0x8000 CXL.mem Protocol Correctable + 0x10000 CXL.mem Protocol Uncorrectable non-fatal + 0x20000 CXL.mem Protocol Uncorrectable fatal + + The <error number> can be written to einj_inject to inject + <error type> into a chosen dport. + +What: /sys/kernel/debug/cxl/$dport_dev/einj_inject +Date: January, 2024 +KernelVersion: v6.9 +Contact: [email protected] +Description: + (WO) Writing an integer to this file injects the corresponding + CXL protocol error into $dport_dev ($dport_dev will be a device + name from /sys/bus/pci/devices). The integer to type mapping for + injection can be found by reading from einj_types. If the dport + was enumerated in RCH mode, a CXL 1.1 error is injected, otherwise + a CXL 2.0 error is injected. diff --git a/Documentation/firmware-guide/acpi/apei/einj.rst b/Documentation/firmware-guide/acpi/apei/einj.rst index d6b61d22f525..c52b9da08fa9 100644 --- a/Documentation/firmware-guide/acpi/apei/einj.rst +++ b/Documentation/firmware-guide/acpi/apei/einj.rst @@ -32,6 +32,10 @@ configuration:: CONFIG_ACPI_APEI CONFIG_ACPI_APEI_EINJ +...and to (optionally) enable CXL protocol error injection set:: + + CONFIG_ACPI_APEI_EINJ_CXL + The EINJ user interface is in <debugfs mount point>/apei/einj. The following files belong to it: @@ -118,6 +122,24 @@ The following files belong to it: this actually works depends on what operations the BIOS actually includes in the trigger phase. +CXL error types are supported from ACPI 6.5 onwards (given a CXL port +is present). The EINJ user interface for CXL error types is at +<debugfs mount point>/cxl. The following files belong to it: + +- einj_types: + + Provides the same functionality as available_error_types above, but + for CXL error types + +- $dport_dev/einj_inject: + + Injects a CXL error type into the CXL port represented by $dport_dev, + where $dport_dev is the name of the CXL port (usually a PCIe device name). + Error injections targeting a CXL 2.0+ port can use the legacy interface + under <debugfs mount point>/apei/einj, while CXL 1.1/1.0 port injections + must use this file. + + BIOS versions based on the ACPI 4.0 specification have limited options in controlling where the errors are injected. Your BIOS may support an extension (enabled with the param_extension=1 module parameter, or boot @@ -181,6 +203,18 @@ You should see something like this in dmesg:: [22715.834759] EDAC sbridge MC3: PROCESSOR 0:306e7 TIME 1422553404 SOCKET 0 APIC 0 [22716.616173] EDAC MC3: 1 CE memory read error on CPU_SrcID#0_Channel#0_DIMM#0 (channel:0 slot:0 page:0x12345 offset:0x0 grain:32 syndrome:0x0 - area:DRAM err_code:0001:0090 socket:0 channel_mask:1 rank:0) +A CXL error injection example with $dport_dev=0000:e0:01.1:: + + # cd /sys/kernel/debug/cxl/ + # ls + 0000:e0:01.1 0000:0c:00.0 + # cat einj_types # See which errors can be injected + 0x00008000 CXL.mem Protocol Correctable + 0x00010000 CXL.mem Protocol Uncorrectable non-fatal + 0x00020000 CXL.mem Protocol Uncorrectable fatal + # cd 0000:e0:01.1 # Navigate to dport to inject into + # echo 0x8000 > einj_inject # Inject error + Special notes for injection into SGX enclaves: There may be a separate BIOS setup option to enable SGX injection. diff --git a/MAINTAINERS b/MAINTAINERS index 2ecaaec6a6bf..90cf8403dd17 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5289,6 +5289,7 @@ M: Dan Williams <[email protected]> S: Maintained F: drivers/cxl/ +F: include/linux/cxl-einj.h F: include/linux/cxl-event.h F: include/uapi/linux/cxl_mem.h F: tools/testing/cxl/ diff --git a/drivers/acpi/apei/Kconfig b/drivers/acpi/apei/Kconfig index 6b18f8bc7be3..3cfe7e7475f2 100644 --- a/drivers/acpi/apei/Kconfig +++ b/drivers/acpi/apei/Kconfig @@ -60,6 +60,19 @@ config ACPI_APEI_EINJ mainly used for debugging and testing the other parts of APEI and some other RAS features. +config ACPI_APEI_EINJ_CXL + bool "CXL Error INJection Support" + default ACPI_APEI_EINJ + depends on ACPI_APEI_EINJ + depends on CXL_BUS && CXL_BUS <= ACPI_APEI_EINJ + help + Support for CXL protocol Error INJection through debugfs/cxl. + Availability and which errors are supported is dependent on + the host platform. Look to ACPI v6.5 section 18.6.4 and kernel + EINJ documentation for more information. + + If unsure say 'n' + config ACPI_APEI_ERST_DEBUG tristate "APEI Error Record Serialization Table (ERST) Debug Support" depends on ACPI_APEI diff --git a/drivers/acpi/apei/Makefile b/drivers/acpi/apei/Makefile index 4dfac2128737..2c474e6477e1 100644 --- a/drivers/acpi/apei/Makefile +++ b/drivers/acpi/apei/Makefile @@ -2,6 +2,8 @@ obj-$(CONFIG_ACPI_APEI) += apei.o obj-$(CONFIG_ACPI_APEI_GHES) += ghes.o obj-$(CONFIG_ACPI_APEI_EINJ) += einj.o +einj-y := einj-core.o +einj-$(CONFIG_ACPI_APEI_EINJ_CXL) += einj-cxl.o obj-$(CONFIG_ACPI_APEI_ERST_DEBUG) += erst-dbg.o apei-y := apei-base.o hest.o erst.o bert.o diff --git a/drivers/acpi/apei/apei-internal.h b/drivers/acpi/apei/apei-internal.h index 67c2c3b959e1..cd2766c69d78 100644 --- a/drivers/acpi/apei/apei-internal.h +++ b/drivers/acpi/apei/apei-internal.h @@ -130,4 +130,22 @@ static inline u32 cper_estatus_len(struct acpi_hest_generic_status *estatus) } int apei_osc_setup(void); + +int einj_get_available_error_type(u32 *type); +int einj_error_inject(u32 type, u32 flags, u64 param1, u64 param2, u64 param3, + u64 param4); +int einj_cxl_rch_error_inject(u32 type, u32 flags, u64 param1, u64 param2, + u64 param3, u64 param4); +bool einj_is_cxl_error_type(u64 type); +int einj_validate_error_type(u64 type); + +#ifndef ACPI_EINJ_CXL_CACHE_CORRECTABLE +#define ACPI_EINJ_CXL_CACHE_CORRECTABLE BIT(12) +#define ACPI_EINJ_CXL_CACHE_UNCORRECTABLE BIT(13) +#define ACPI_EINJ_CXL_CACHE_FATAL BIT(14) +#define ACPI_EINJ_CXL_MEM_CORRECTABLE BIT(15) +#define ACPI_EINJ_CXL_MEM_UNCORRECTABLE BIT(16) +#define ACPI_EINJ_CXL_MEM_FATAL BIT(17) +#endif + #endif diff --git a/drivers/acpi/apei/einj.c b/drivers/acpi/apei/einj-core.c index 89fb9331c611..66e7f529e92f 100644 --- a/drivers/acpi/apei/einj.c +++ b/drivers/acpi/apei/einj-core.c @@ -21,6 +21,7 @@ #include <linux/nmi.h> #include <linux/delay.h> #include <linux/mm.h> +#include <linux/platform_device.h> #include <asm/unaligned.h> #include "apei-internal.h" @@ -36,6 +37,12 @@ #define MEM_ERROR_MASK (ACPI_EINJ_MEMORY_CORRECTABLE | \ ACPI_EINJ_MEMORY_UNCORRECTABLE | \ ACPI_EINJ_MEMORY_FATAL) +#define CXL_ERROR_MASK (ACPI_EINJ_CXL_CACHE_CORRECTABLE | \ + ACPI_EINJ_CXL_CACHE_UNCORRECTABLE | \ + ACPI_EINJ_CXL_CACHE_FATAL | \ + ACPI_EINJ_CXL_MEM_CORRECTABLE | \ + ACPI_EINJ_CXL_MEM_UNCORRECTABLE | \ + ACPI_EINJ_CXL_MEM_FATAL) /* * ACPI version 5 provides a SET_ERROR_TYPE_WITH_ADDRESS action. @@ -137,6 +144,11 @@ static struct apei_exec_ins_type einj_ins_type[] = { */ static DEFINE_MUTEX(einj_mutex); +/* + * Exported APIs use this flag to exit early if einj_probe() failed. + */ +bool einj_initialized __ro_after_init; + static void *einj_param; static void einj_exec_ctx_init(struct apei_exec_context *ctx) @@ -160,7 +172,7 @@ static int __einj_get_available_error_type(u32 *type) } /* Get error injection capabilities of the platform */ -static int einj_get_available_error_type(u32 *type) +int einj_get_available_error_type(u32 *type) { int rc; @@ -530,8 +542,8 @@ static int __einj_error_inject(u32 type, u32 flags, u64 param1, u64 param2, } /* Inject the specified hardware error */ -static int einj_error_inject(u32 type, u32 flags, u64 param1, u64 param2, - u64 param3, u64 param4) +int einj_error_inject(u32 type, u32 flags, u64 param1, u64 param2, u64 param3, + u64 param4) { int rc; u64 base_addr, size; @@ -554,8 +566,17 @@ static int einj_error_inject(u32 type, u32 flags, u64 param1, u64 param2, if (type & ACPI5_VENDOR_BIT) { if (vendor_flags != SETWA_FLAGS_MEM) goto inject; - } else if (!(type & MEM_ERROR_MASK) && !(flags & SETWA_FLAGS_MEM)) + } else if (!(type & MEM_ERROR_MASK) && !(flags & SETWA_FLAGS_MEM)) { goto inject; + } + + /* + * Injections targeting a CXL 1.0/1.1 port have to be injected + * via the einj_cxl_rch_error_inject() path as that does the proper + * validation of the given RCRB base (MMIO) address. + */ + if (einj_is_cxl_error_type(type) && (flags & SETWA_FLAGS_MEM)) + return -EINVAL; /* * Disallow crazy address masks that give BIOS leeway to pick @@ -587,6 +608,21 @@ inject: return rc; } +int einj_cxl_rch_error_inject(u32 type, u32 flags, u64 param1, u64 param2, + u64 param3, u64 param4) +{ + int rc; + + if (!(einj_is_cxl_error_type(type) && (flags & SETWA_FLAGS_MEM))) + return -EINVAL; + + mutex_lock(&einj_mutex); + rc = __einj_error_inject(type, flags, param1, param2, param3, param4); + mutex_unlock(&einj_mutex); + + return rc; +} + static u32 error_type; static u32 error_flags; static u64 error_param1; @@ -607,12 +643,6 @@ static struct { u32 mask; const char *str; } const einj_error_type_string[] = { { BIT(9), "Platform Correctable" }, { BIT(10), "Platform Uncorrectable non-fatal" }, { BIT(11), "Platform Uncorrectable fatal"}, - { BIT(12), "CXL.cache Protocol Correctable" }, - { BIT(13), "CXL.cache Protocol Uncorrectable non-fatal" }, - { BIT(14), "CXL.cache Protocol Uncorrectable fatal" }, - { BIT(15), "CXL.mem Protocol Correctable" }, - { BIT(16), "CXL.mem Protocol Uncorrectable non-fatal" }, - { BIT(17), "CXL.mem Protocol Uncorrectable fatal" }, { BIT(31), "Vendor Defined Error Types" }, }; @@ -641,22 +671,26 @@ static int error_type_get(void *data, u64 *val) return 0; } -static int error_type_set(void *data, u64 val) +bool einj_is_cxl_error_type(u64 type) { + return (type & CXL_ERROR_MASK) && (!(type & ACPI5_VENDOR_BIT)); +} + +int einj_validate_error_type(u64 type) +{ + u32 tval, vendor, available_error_type = 0; int rc; - u32 available_error_type = 0; - u32 tval, vendor; /* Only low 32 bits for error type are valid */ - if (val & GENMASK_ULL(63, 32)) + if (type & GENMASK_ULL(63, 32)) return -EINVAL; /* * Vendor defined types have 0x80000000 bit set, and * are not enumerated by ACPI_EINJ_GET_ERROR_TYPE */ - vendor = val & ACPI5_VENDOR_BIT; - tval = val & 0x7fffffff; + vendor = type & ACPI5_VENDOR_BIT; + tval = type & GENMASK(30, 0); /* Only one error type can be specified */ if (tval & (tval - 1)) @@ -665,9 +699,21 @@ static int error_type_set(void *data, u64 val) rc = einj_get_available_error_type(&available_error_type); if (rc) return rc; - if (!(val & available_error_type)) + if (!(type & available_error_type)) return -EINVAL; } + + return 0; +} + +static int error_type_set(void *data, u64 val) +{ + int rc; + + rc = einj_validate_error_type(val); + if (rc) + return rc; + error_type = val; return 0; @@ -703,21 +749,21 @@ static int einj_check_table(struct acpi_table_einj *einj_tab) return 0; } -static int __init einj_init(void) +static int __init einj_probe(struct platform_device *pdev) { int rc; acpi_status status; struct apei_exec_context ctx; if (acpi_disabled) { - pr_info("ACPI disabled.\n"); + pr_debug("ACPI disabled.\n"); return -ENODEV; } status = acpi_get_table(ACPI_SIG_EINJ, 0, (struct acpi_table_header **)&einj_tab); if (status == AE_NOT_FOUND) { - pr_warn("EINJ table not found.\n"); + pr_debug("EINJ table not found.\n"); return -ENODEV; } else if (ACPI_FAILURE(status)) { pr_err("Failed to get EINJ table: %s\n", @@ -805,7 +851,7 @@ err_put_table: return rc; } -static void __exit einj_exit(void) +static void __exit einj_remove(struct platform_device *pdev) { struct apei_exec_context ctx; @@ -826,6 +872,40 @@ static void __exit einj_exit(void) acpi_put_table((struct acpi_table_header *)einj_tab); } +static struct platform_device *einj_dev; +static struct platform_driver einj_driver = { + .remove_new = einj_remove, + .driver = { + .name = "acpi-einj", + }, +}; + +static int __init einj_init(void) +{ + struct platform_device_info einj_dev_info = { + .name = "acpi-einj", + .id = -1, + }; + int rc; + + einj_dev = platform_device_register_full(&einj_dev_info); + if (IS_ERR(einj_dev)) + return PTR_ERR(einj_dev); + + rc = platform_driver_probe(&einj_driver, einj_probe); + einj_initialized = rc == 0; + + return 0; +} + +static void __exit einj_exit(void) +{ + if (einj_initialized) + platform_driver_unregister(&einj_driver); + + platform_device_del(einj_dev); +} + module_init(einj_init); module_exit(einj_exit); diff --git a/drivers/acpi/apei/einj-cxl.c b/drivers/acpi/apei/einj-cxl.c new file mode 100644 index 000000000000..8b8be0c90709 --- /dev/null +++ b/drivers/acpi/apei/einj-cxl.c @@ -0,0 +1,113 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * CXL Error INJection support. Used by CXL core to inject + * protocol errors into CXL ports. + * + * Copyright (C) 2023 Advanced Micro Devices, Inc. + * + * Author: Ben Cheatham <[email protected]> + */ +#include <linux/einj-cxl.h> +#include <linux/seq_file.h> +#include <linux/pci.h> + +#include "apei-internal.h" + +/* Defined in einj-core.c */ +extern bool einj_initialized; + +static struct { u32 mask; const char *str; } const einj_cxl_error_type_string[] = { + { ACPI_EINJ_CXL_CACHE_CORRECTABLE, "CXL.cache Protocol Correctable" }, + { ACPI_EINJ_CXL_CACHE_UNCORRECTABLE, "CXL.cache Protocol Uncorrectable non-fatal" }, + { ACPI_EINJ_CXL_CACHE_FATAL, "CXL.cache Protocol Uncorrectable fatal" }, + { ACPI_EINJ_CXL_MEM_CORRECTABLE, "CXL.mem Protocol Correctable" }, + { ACPI_EINJ_CXL_MEM_UNCORRECTABLE, "CXL.mem Protocol Uncorrectable non-fatal" }, + { ACPI_EINJ_CXL_MEM_FATAL, "CXL.mem Protocol Uncorrectable fatal" }, +}; + +int einj_cxl_available_error_type_show(struct seq_file *m, void *v) +{ + int cxl_err, rc; + u32 available_error_type = 0; + + rc = einj_get_available_error_type(&available_error_type); + if (rc) + return rc; + + for (int pos = 0; pos < ARRAY_SIZE(einj_cxl_error_type_string); pos++) { + cxl_err = ACPI_EINJ_CXL_CACHE_CORRECTABLE << pos; + + if (available_error_type & cxl_err) + seq_printf(m, "0x%08x\t%s\n", + einj_cxl_error_type_string[pos].mask, + einj_cxl_error_type_string[pos].str); + } + + return 0; +} +EXPORT_SYMBOL_NS_GPL(einj_cxl_available_error_type_show, CXL); + +static int cxl_dport_get_sbdf(struct pci_dev *dport_dev, u64 *sbdf) +{ + struct pci_bus *pbus; + struct pci_host_bridge *bridge; + u64 seg = 0, bus; + + pbus = dport_dev->bus; + bridge = pci_find_host_bridge(pbus); + + if (!bridge) + return -ENODEV; + + if (bridge->domain_nr != PCI_DOMAIN_NR_NOT_SET) + seg = bridge->domain_nr; + + bus = pbus->number; + *sbdf = (seg << 24) | (bus << 16) | dport_dev->devfn; + + return 0; +} + +int einj_cxl_inject_rch_error(u64 rcrb, u64 type) +{ + int rc; + + /* Only CXL error types can be specified */ + if (!einj_is_cxl_error_type(type)) + return -EINVAL; + + rc = einj_validate_error_type(type); + if (rc) + return rc; + + return einj_cxl_rch_error_inject(type, 0x2, rcrb, GENMASK_ULL(63, 0), + 0, 0); +} +EXPORT_SYMBOL_NS_GPL(einj_cxl_inject_rch_error, CXL); + +int einj_cxl_inject_error(struct pci_dev *dport, u64 type) +{ + u64 param4 = 0; + int rc; + + /* Only CXL error types can be specified */ + if (!einj_is_cxl_error_type(type)) + return -EINVAL; + + rc = einj_validate_error_type(type); + if (rc) + return rc; + + rc = cxl_dport_get_sbdf(dport, ¶m4); + if (rc) + return rc; + + return einj_error_inject(type, 0x4, 0, 0, 0, param4); +} +EXPORT_SYMBOL_NS_GPL(einj_cxl_inject_error, CXL); + +bool einj_cxl_is_initialized(void) +{ + return einj_initialized; +} +EXPORT_SYMBOL_NS_GPL(einj_cxl_is_initialized, CXL); diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c index 9ab542e7af65..2b0cab556072 100644 --- a/drivers/cxl/core/port.c +++ b/drivers/cxl/core/port.c @@ -3,6 +3,7 @@ #include <linux/platform_device.h> #include <linux/memregion.h> #include <linux/workqueue.h> +#include <linux/einj-cxl.h> #include <linux/debugfs.h> #include <linux/device.h> #include <linux/module.h> @@ -793,6 +794,40 @@ static int cxl_dport_setup_regs(struct device *host, struct cxl_dport *dport, return rc; } +DEFINE_SHOW_ATTRIBUTE(einj_cxl_available_error_type); + +static int cxl_einj_inject(void *data, u64 type) +{ + struct cxl_dport *dport = data; + + if (dport->rch) + return einj_cxl_inject_rch_error(dport->rcrb.base, type); + + return einj_cxl_inject_error(to_pci_dev(dport->dport_dev), type); +} +DEFINE_DEBUGFS_ATTRIBUTE(cxl_einj_inject_fops, NULL, cxl_einj_inject, + "0x%llx\n"); + +static void cxl_debugfs_create_dport_dir(struct cxl_dport *dport) +{ + struct dentry *dir; + + if (!einj_cxl_is_initialized()) + return; + + /* + * dport_dev needs to be a PCIe port for CXL 2.0+ ports because + * EINJ expects a dport SBDF to be specified for 2.0 error injection. + */ + if (!dport->rch && !dev_is_pci(dport->dport_dev)) + return; + + dir = cxl_debugfs_create_dir(dev_name(dport->dport_dev)); + + debugfs_create_file("einj_inject", 0200, dir, dport, + &cxl_einj_inject_fops); +} + static struct cxl_port *__devm_cxl_add_port(struct device *host, struct device *uport_dev, resource_size_t component_reg_phys, @@ -1150,6 +1185,8 @@ __devm_cxl_add_dport(struct cxl_port *port, struct device *dport_dev, if (dev_is_pci(dport_dev)) dport->link_latency = cxl_pci_get_latency(to_pci_dev(dport_dev)); + cxl_debugfs_create_dport_dir(dport); + return dport; } @@ -2236,6 +2273,10 @@ static __init int cxl_core_init(void) cxl_debugfs = debugfs_create_dir("cxl", NULL); + if (einj_cxl_is_initialized()) + debugfs_create_file("einj_types", 0400, cxl_debugfs, NULL, + &einj_cxl_available_error_type_fops); + cxl_mbox_init(); rc = cxl_memdev_init(); diff --git a/include/linux/einj-cxl.h b/include/linux/einj-cxl.h new file mode 100644 index 000000000000..624ff6ff41f9 --- /dev/null +++ b/include/linux/einj-cxl.h @@ -0,0 +1,44 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * CXL protocol Error INJection support. + * + * Copyright (c) 2023 Advanced Micro Devices, Inc. + * All Rights Reserved. + * + * Author: Ben Cheatham <[email protected]> + */ +#ifndef EINJ_CXL_H +#define EINJ_CXL_H + +#include <linux/errno.h> +#include <linux/types.h> + +struct pci_dev; +struct seq_file; + +#if IS_ENABLED(CONFIG_ACPI_APEI_EINJ_CXL) +int einj_cxl_available_error_type_show(struct seq_file *m, void *v); +int einj_cxl_inject_error(struct pci_dev *dport_dev, u64 type); +int einj_cxl_inject_rch_error(u64 rcrb, u64 type); +bool einj_cxl_is_initialized(void); +#else /* !IS_ENABLED(CONFIG_ACPI_APEI_EINJ_CXL) */ +static inline int einj_cxl_available_error_type_show(struct seq_file *m, + void *v) +{ + return -ENXIO; +} + +static inline int einj_cxl_inject_error(struct pci_dev *dport_dev, u64 type) +{ + return -ENXIO; +} + +static inline int einj_cxl_inject_rch_error(u64 rcrb, u64 type) +{ + return -ENXIO; +} + +static inline bool einj_cxl_is_initialized(void) { return false; } +#endif /* CONFIG_ACPI_APEI_EINJ_CXL */ + +#endif /* EINJ_CXL_H */ |