diff options
| -rw-r--r-- | arch/arm/boot/dts/sun4i-a10.dtsi | 44 | ||||
| -rw-r--r-- | arch/arm/boot/dts/sun7i-a20-bananapi.dts | 5 | ||||
| -rw-r--r-- | arch/arm/boot/dts/sun8i-a23-a33.dtsi | 175 | ||||
| -rw-r--r-- | arch/arm/boot/dts/sun8i-a23-q8-tablet.dts | 4 | ||||
| -rw-r--r-- | arch/arm/boot/dts/sun8i-a23.dtsi | 20 | ||||
| -rw-r--r-- | arch/arm/boot/dts/sun8i-a33.dtsi | 194 | ||||
| -rw-r--r-- | arch/arm/boot/dts/sun8i-q8-common.dtsi | 37 | ||||
| -rw-r--r-- | arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 41 | ||||
| -rw-r--r-- | arch/arm/boot/dts/sun8i-r40.dtsi | 15 | ||||
| -rw-r--r-- | arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi | 16 |
10 files changed, 379 insertions, 172 deletions
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 5d46bb0139fa..73c3ac42095f 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -184,6 +184,26 @@ status = "disabled"; }; + pmu { + compatible = "arm,cortex-a8-pmu"; + interrupts = <3>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* Address must be kept in the lower 256 MiBs of DRAM for VE. */ + default-pool { + compatible = "shared-dma-pool"; + size = <0x6000000>; + alloc-ranges = <0x4a000000 0x6000000>; + reusable; + linux,cma-default; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -224,6 +244,19 @@ status = "disabled"; }; }; + + sram_c: sram@1d00000 { + compatible = "mmio-sram"; + reg = <0x01d00000 0xd0000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x01d00000 0xd0000>; + + ve_sram: sram-section@0 { + compatible = "allwinner,sun4i-a10-sram-c1"; + reg = <0x000000 0x80000>; + }; + }; }; dma: dma-controller@1c02000 { @@ -394,6 +427,17 @@ }; }; + video-codec@1c0e000 { + compatible = "allwinner,sun4i-a10-video-engine"; + reg = <0x01c0e000 0x1000>; + clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>, + <&ccu CLK_DRAM_VE>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_VE>; + interrupts = <53>; + allwinner,sram = <&ve_sram 1>; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun4i-a10-mmc"; reg = <0x01c0f000 0x1000>; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index 556b1b591c5d..81bc85d398c1 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -191,6 +191,11 @@ }; &pio { + vcc-pa-supply = <®_vcc3v3>; + vcc-pc-supply = <®_vcc3v3>; + vcc-pe-supply = <®_vcc3v3>; + vcc-pf-supply = <®_vcc3v3>; + vcc-pg-supply = <®_vcc3v3>; gpio-line-names = /* PA */ "ERXD3", "ERXD2", "ERXD1", "ERXD0", "ETXD3", diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index a9c123de5d2c..43fe215e83ea 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -68,6 +68,12 @@ }; }; + de: display-engine { + /* compatible gets set in SoC specific dtsi file */ + allwinner,pipelines = <&fe0>; + status = "disabled"; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, @@ -155,6 +161,55 @@ #dma-cells = <1>; }; + nfc: nand@1c03000 { + compatible = "allwinner,sun4i-a10-nand"; + reg = <0x01c03000 0x1000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_NAND>; + reset-names = "ahb"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + tcon0: lcd-controller@1c0c000 { + /* compatible gets set in SoC specific dtsi file */ + reg = <0x01c0c000 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_LCD>, + <&ccu CLK_LCD_CH0>; + clock-names = "ahb", + "tcon-ch0"; + clock-output-names = "tcon-pixel-clock"; + resets = <&ccu RST_BUS_LCD>; + reset-names = "lcd"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon0_in_drc0: endpoint@0 { + reg = <0>; + remote-endpoint = <&drc0_out_tcon0>; + }; + }; + + tcon0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c0f000 0x1000>; @@ -214,21 +269,6 @@ #size-cells = <0>; }; - nfc: nand@1c03000 { - compatible = "allwinner,sun4i-a10-nand"; - reg = <0x01c03000 0x1000>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>; - clock-names = "ahb", "mod"; - resets = <&ccu RST_BUS_NAND>; - reset-names = "ahb"; - pinctrl-names = "default"; - pinctrl-0 = <&nand_pins &nand_pins_cs0 &nand_pins_rb0>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - usb_otg: usb@1c19000 { /* compatible gets set in SoC specific dtsi file */ reg = <0x01c19000 0x0400>; @@ -572,6 +612,111 @@ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; + fe0: display-frontend@1e00000 { + /* compatible gets set in SoC specific dtsi file */ + reg = <0x01e00000 0x20000>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_DE_FE>, <&ccu CLK_DE_FE>, + <&ccu CLK_DRAM_DE_FE>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_BUS_DE_FE>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe0_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_fe0>; + }; + }; + }; + }; + + be0: display-backend@1e60000 { + /* compatible gets set in SoC specific dtsi file */ + reg = <0x01e60000 0x10000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>, + <&ccu CLK_DRAM_DE_BE>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_BUS_DE_BE>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + be0_in_fe0: endpoint@0 { + reg = <0>; + remote-endpoint = <&fe0_out_be0>; + }; + }; + + be0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + be0_out_drc0: endpoint@0 { + reg = <0>; + remote-endpoint = <&drc0_in_be0>; + }; + }; + }; + }; + + drc0: drc@1e70000 { + /* compatible gets set in SoC specific dtsi file */ + reg = <0x01e70000 0x10000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_DRC>, <&ccu CLK_DRC>, + <&ccu CLK_DRAM_DRC>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_BUS_DRC>; + + assigned-clocks = <&ccu CLK_DRC>; + assigned-clock-rates = <300000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + drc0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + drc0_in_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_out_drc0>; + }; + }; + + drc0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + drc0_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_drc0>; + }; + }; + }; + }; + rtc: rtc@1f00000 { compatible = "allwinner,sun8i-a23-rtc"; reg = <0x01f00000 0x400>; diff --git a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts index b6958e8f2f01..d4dab7c28398 100644 --- a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts +++ b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts @@ -61,3 +61,7 @@ "Headset Mic", "HBIAS"; status = "okay"; }; + +&panel { + compatible = "bananapi,s070wv20-ct16", "simple-panel"; +}; diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi index d00055e9eef5..a5e884a8b2ae 100644 --- a/arch/arm/boot/dts/sun8i-a23.dtsi +++ b/arch/arm/boot/dts/sun8i-a23.dtsi @@ -62,10 +62,26 @@ }; }; +&be0 { + compatible = "allwinner,sun8i-a23-display-backend"; +}; + &ccu { compatible = "allwinner,sun8i-a23-ccu"; }; +&de { + compatible = "allwinner,sun8i-a23-display-engine"; +}; + +&drc0 { + compatible = "allwinner,sun8i-a23-drc"; +}; + +&fe0 { + compatible = "allwinner,sun8i-a23-display-frontend"; +}; + &pio { compatible = "allwinner,sun8i-a23-pinctrl"; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, @@ -73,6 +89,10 @@ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; }; +&tcon0 { + compatible = "allwinner,sun8i-a23-tcon"; +}; + &usb_otg { compatible = "allwinner,sun6i-a31-musb"; }; diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index 626152c30f50..1111a6498102 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -159,12 +159,6 @@ }; }; - de: display-engine { - compatible = "allwinner,sun8i-a33-display-engine"; - allwinner,pipelines = <&fe0>; - status = "disabled"; - }; - iio-hwmon { compatible = "iio-hwmon"; io-channels = <&ths>; @@ -209,47 +203,6 @@ }; soc { - tcon0: lcd-controller@1c0c000 { - compatible = "allwinner,sun8i-a33-tcon"; - reg = <0x01c0c000 0x1000>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_LCD>, - <&ccu CLK_LCD_CH0>; - clock-names = "ahb", - "tcon-ch0"; - clock-output-names = "tcon-pixel-clock"; - resets = <&ccu RST_BUS_LCD>; - reset-names = "lcd"; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - tcon0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - tcon0_in_drc0: endpoint@0 { - reg = <0>; - remote-endpoint = <&drc0_out_tcon0>; - }; - }; - - tcon0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - tcon0_out_dsi: endpoint@1 { - reg = <1>; - remote-endpoint = <&dsi_in_tcon0>; - }; - }; - }; - }; - video-codec@1c0e000 { compatible = "allwinner,sun8i-a33-video-engine"; reg = <0x01c0e000 0x1000>; @@ -339,115 +292,6 @@ status = "disabled"; #phy-cells = <0>; }; - - fe0: display-frontend@1e00000 { - compatible = "allwinner,sun8i-a33-display-frontend"; - reg = <0x01e00000 0x20000>; - interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_DE_FE>, <&ccu CLK_DE_FE>, - <&ccu CLK_DRAM_DE_FE>; - clock-names = "ahb", "mod", - "ram"; - resets = <&ccu RST_BUS_DE_FE>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - fe0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - fe0_out_be0: endpoint@0 { - reg = <0>; - remote-endpoint = <&be0_in_fe0>; - }; - }; - }; - }; - - be0: display-backend@1e60000 { - compatible = "allwinner,sun8i-a33-display-backend"; - reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>; - reg-names = "be", "sat"; - interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>, - <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>; - clock-names = "ahb", "mod", - "ram", "sat"; - resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>; - reset-names = "be", "sat"; - assigned-clocks = <&ccu CLK_DE_BE>; - assigned-clock-rates = <300000000>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - be0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - be0_in_fe0: endpoint@0 { - reg = <0>; - remote-endpoint = <&fe0_out_be0>; - }; - }; - - be0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - be0_out_drc0: endpoint@0 { - reg = <0>; - remote-endpoint = <&drc0_in_be0>; - }; - }; - }; - }; - - drc0: drc@1e70000 { - compatible = "allwinner,sun8i-a33-drc"; - reg = <0x01e70000 0x10000>; - interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_DRC>, <&ccu CLK_DRC>, - <&ccu CLK_DRAM_DRC>; - clock-names = "ahb", "mod", "ram"; - resets = <&ccu RST_BUS_DRC>; - - assigned-clocks = <&ccu CLK_DRC>; - assigned-clock-rates = <300000000>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - drc0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - drc0_in_be0: endpoint@0 { - reg = <0>; - remote-endpoint = <&be0_out_drc0>; - }; - }; - - drc0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - drc0_out_tcon0: endpoint@0 { - reg = <0>; - remote-endpoint = <&tcon0_in_drc0>; - }; - }; - }; - }; }; thermal-zones { @@ -524,10 +368,37 @@ }; }; +&be0 { + compatible = "allwinner,sun8i-a33-display-backend"; + /* A33 has an extra "SAT" module packed inside the display backend */ + reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>; + reg-names = "be", "sat"; + clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>, + <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>; + clock-names = "ahb", "mod", + "ram", "sat"; + resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>; + reset-names = "be", "sat"; + assigned-clocks = <&ccu CLK_DE_BE>; + assigned-clock-rates = <300000000>; +}; + &ccu { compatible = "allwinner,sun8i-a33-ccu"; }; +&de { + compatible = "allwinner,sun8i-a33-display-engine"; +}; + +&drc0 { + compatible = "allwinner,sun8i-a33-drc"; +}; + +&fe0 { + compatible = "allwinner,sun8i-a33-display-frontend"; +}; + &mali { operating-points-v2 = <&mali_opp_table>; }; @@ -544,6 +415,17 @@ }; +&tcon0 { + compatible = "allwinner,sun8i-a33-tcon"; +}; + +&tcon0_out { + tcon0_out_dsi: endpoint@1 { + reg = <1>; + remote-endpoint = <&dsi_in_tcon0>; + }; +}; + &usb_otg { compatible = "allwinner,sun8i-a33-musb"; }; diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi index 719ad769b837..53104f4ccacc 100644 --- a/arch/arm/boot/dts/sun8i-q8-common.dtsi +++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi @@ -49,6 +49,26 @@ ethernet0 = &sdio_wifi; }; + panel: panel { + /* Tablet dts should provide panel compatible */ + backlight = <&backlight>; + enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ + power-supply = <®_dc1sw>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + panel_input: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_lcd>; + }; + }; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; /* @@ -64,6 +84,10 @@ }; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -90,6 +114,19 @@ }; }; +&tcon0 { + pinctrl-names = "default"; + pinctrl-0 = <&lcd_rgb666_pins>; + status = "okay"; +}; + +&tcon0_out { + tcon0_out_lcd: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; +}; + &usbphy { usb1_vbus-supply = <®_dldo1>; }; diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts index 438b7b44dab3..c488aaacbd68 100644 --- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts +++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts @@ -102,6 +102,8 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */ + clocks = <&ccu CLK_OUTA>; + clock-names = "ext_clock"; }; }; @@ -196,6 +198,11 @@ status = "okay"; }; +&pio { + pinctrl-names = "default"; + pinctrl-0 = <&clk_out_a_pin>; +}; + ®_aldo2 { regulator-always-on; regulator-min-microvolt = <2500000>; @@ -250,12 +257,27 @@ regulator-name = "vcc-wifi-io"; }; +/* + * Our WiFi chip needs both DLDO2 and DLDO3 to be powered at the same + * time, with the two being in sync, to be able to meet maximum power + * consumption during transmits. Since this is not really supported + * right now, just use the two as always on, and we will fix it later. + */ + ®_dldo2 { + regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vcc-wifi"; }; +®_dldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-2"; +}; + ®_dldo4 { regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; @@ -278,6 +300,25 @@ status = "okay"; }; +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_cts_pg_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&ccu CLK_OUTA>; + clock-names = "lpo"; + vbat-supply = <®_dldo2>; + vddio-supply = <®_dldo1>; + device-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ + /* TODO host wake line connected to PMIC GPIO pins */ + shutdown-gpios = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */ + max-speed = <1500000>; + }; +}; + &usbphy { usb1_vbus-supply = <®_vcc5v0>; usb2_vbus-supply = <®_vcc5v0>; diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index 89762dbefe42..06b685869f52 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -342,6 +342,11 @@ #interrupt-cells = <3>; #gpio-cells = <3>; + clk_out_a_pin: clk-out-a-pin { + pins = "PI12"; + function = "clk_out_a"; + }; + gmac_rgmii_pins: gmac-rgmii-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", @@ -389,6 +394,16 @@ pins = "PB22", "PB23"; function = "uart0"; }; + + uart3_pg_pins: uart3-pg-pins { + pins = "PG6", "PG7"; + function = "uart3"; + }; + + uart3_rts_cts_pg_pins: uart3-rts-cts-pg-pins { + pins = "PG8", "PG9"; + function = "uart3"; + }; }; wdt: watchdog@1c20c90 { diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi index b3283aeb5b7d..3bed375b9c03 100644 --- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi +++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi @@ -103,6 +103,8 @@ compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + clocks = <&rtc 1>; + clock-names = "ext_clock"; }; }; @@ -215,7 +217,19 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; - status = "okay"; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_vcc3v3>; + vddio-supply = <®_vcc3v3>; + device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ + host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ + shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + }; }; &usb_otg { |